Desktop too small when connecting to computer via RWW, Windows 7
Using Remote Web Workplace to access an sbs2008, x64 with A-D. desktop is XP pro, remote is Lenovo 28427PU laptop 4 GB, with Windows 7. Get a black border around the screen when you log into the desktop you want to view. Changing resolution does not seem
to change this.
This works fine. SBS 2008 system and I had the exact complaint from a user.
I tested the remote desktop session and sure enough the view of the remote desktop had a black box around it--smaller resolution.
I backed out and pressed F10 to display the tool bar, clicked View, Toolbars, and then selected 'Status bar' in order to see the magnification level at the bottom right hand side of IE 10.
Once set to 100% I switched back to the RDC---still with the black box. I had to close the remote session and then reconnect in order for the 100% change to take effect.
Display is completely as desired now.
Lovely how many steps you have to go through on this.
Don't forget to set IE 9 and greater to 'Compatibility mode' and add it as a 'Trusted site' (your RWW website) in order for any of this to work. I have to make very detailed step by step instructions for my users --adding this step in next.
Thank you.
Similar Messages
-
IPhone locks up when connected to computer (Mac or Windows)
Hello fellow iPhone owners,
My iPhone started to have this issue starting yesterday and I am quite baffled atm. When I connect my iPhone to a computer, whether or not it's a Mac or Windows, it begins to charge and behaves normally at first. However, few minutes in, the phone vibrates twice and the loading circle appears dead center in between all the app icons. The loading circle spins, but the entire phone is pretty much locked and in interval of 10-15 seconds the phone will vibrate twice.
This initially did not allow my Mac to open up iTunes, so I deleted all my podcasts as suggested from the intranet which helped the iTunes issue. Yet, the phone continues to lock up with the loading screen. I also tried doing a hardreset pressing the Lock and Home button multiple times with no avail.
Any suggestions?
Thanks!Your phone will not appear like an attached hard drive. But it should appear in iTunes. iTunes 10.7 or later and Mac OSX 10.6.8 or later are required.
Start iTunes on your Mac. If its iTunes 11 use the View menu to View Sidebar. Connect your iPhone. The phone should appear in the sidebar. Select your phone and use the row of tabs in the right side window to make selections. -
i can not open my i pad-1 and the device gave me message connect to iTunes and when connect the computer give me message type the password firstly i do not know what can i do ?
Is it disabled due to too many incorrect passcode attempts ? If it is then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.
-
ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source
What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
Cheers, Tom -
My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?
Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice. -
my iphone 4s isnt coming up in my computer devises or in my itunes, yet is charging when connected to computer??
try restarting AMDS http://support.apple.com/kb/TS1567
-
I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features of those two? I just want to add a feature. Thanks
Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
iTunes Store: Associating a device or computer to your Apple ID -
Vimeo says ' oops, file too small' when I try to upload an iMovie project. My file is definitely big enough. Any clues, please?
It's OK, I've cracked it with the help of my son.
-
Forget iPhone password, when connect to computer "iTunes could not connect to the iPhone because it is locked with a pass code. You must enter pass code on the iPhone before it can be used with iTunes."
You have to restore it using a computer with iTunes per the knowledge base article above.
With iOS 7, if you have Find My Phone turned on you can login to iCloud from a computer and send an erase signal to the iPhone to clear it...that will erase all content and settings. -
Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?
Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?
-
Can I use my Airport Express as an end point on a wireless network and connect a computer via the ethernet port? - I'm wanting to connect a computer that does not have wireless and is in another building.
The requirements for this to work are:
1) The AirPort Express must be the 802.11"n" version. Model Number is A1264
2) There must be adequate wireless signal stength where the Express will be located
3) The Express must be configured to "join" the wireless network with the option checked to activate the Ethernet port -
my ipad still will not start. When connected to wall charger it shows the connect to itunes. When connected to computer it is a black screen and slightly blinks
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom -
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
turnbui wrote:
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
Pete -
I cannot get the CreatePDF Desktop Tool to install on my computer. Running Windows 7.
I cannot get the CreatePDF Desktop Tool to install on my computer. Running Windows 7.
If it's the tool mentioned in this link then I think it's been End Of Life.
CreatePDF Desktop Application -
My ipod touch and also ipad is not coming up or showing when connecting to my computer and hence cannot sync it. The last available sync was about a week ago. Any ideas on what is not happening?
See:
iOS: Device not recognized in iTunes for Windows
Maybe you are looking for
-
2 imacs v 1mbp for use with FCP and motion.
I'm in need of advice. I'm in the market for a new computer(s). Let me give you a rundown on my situation. HOME COMPUTER- dual 800 1GIG ram G4. probably 6-7 years old -i got it 2nd hand in 03 i think- (its about 6 years old and very noisy and update
-
Kindly suggest me regarding vendor evaluation (me63) score
Dear Friends, I have excuted the report of vendor evaluation but here for Price criteria ( subcriteria) 40,40 are coming and some times it is 46,48 are coming. and for other criteria delivery it is 68,70 like that it is coming. kindly let me know how
-
Hi all, Can anyone help me with the attached VI? The "Search 1-D Array" does not seem to be searching. The output is always -1, when I know that my data from my excel sheet that I am reading from contains the number 193.3359. I intend to find how
-
I cant force firefox to open a new tab instead it opens a window
i am having a problem whereby even if i right click "open in new tab" it opens a new window. I`ve tried tools, open new window as a tab... no change. I`ve tried the restriction thing (going into the config for firefox and setting the restiction to ze
-
Creating Mobile Link that Isn't Visible on Desktop Browser
I hope this makes sense. I have a mobile site with a link to my desktop site. I also want to add a link on the desktop site for mobile visitors to get back to the mobile site. But I don't want this link visible on a desktop browser... only visible on