Desperately looking for mac.h header for Solaris 10u7 (NOT opensolaris)

Hi there,
for an experimental project I am trying to build a GLDv3 ethernet driver under Solaris 10 u7 x86.
Unfortunately building the driver requires some GLDv3 specific headers that are not shipped with
Solaris 10, because the GLDv3 interface is still unstable and therefore subject to change often.
Nonetheless I would like to build the driver, so does anyone out there have the following include files: mac.h, mac_ether.h, mac_flow.h, mac_provider.h? These must be for Solaris 10u7 or the driver will not build and/or work...
Again this is Solaris 10 not Opensolaris, and I cannot switch to Opensolaris for this project...
Thanks in advance for your help!
Rick

Issue has been resolved offline... ;-)
Matthias

Similar Messages

Captivate 6 for Mac too buggy for use (screen corruption, mouse/audio instability)

Corrupt Screens. The main problem is corrupt screens (visually jumbled, with elements of previous screens). The corrupt screens appear in both Preview in a Web Browser and in a published project. I've observed the problem when I capture website interactions (using either Safari or Firefox). It might be isolated to web browsers and not other applications, but I'm not sure. The project slides themselves look fine. The problem occurs during the transition to an HTML/SWF-based preview or published file.
Unfortunately the problem appears to be intermittent and unpredictable: one Preview (in Web Browser) might show one corrupt screen; a subsequent Preview (in Web Browser) might show four corrupt screens (after making no changes to the Captivate file). It appears to be related to various timeline factors (mouse position, mouse duration). I was able to temporarily eliminate the problem in one project file by making sure all mouse elements had a 2/10th second gap before the end of the slide and were no longer than 2 seconds long. But in a later test, controlling for these variables did not work.
There are two other related bugs that occur in Preview or publish:
Mouse. If I move the mouse object from its original position on the timeline, say, from the end of the slide to a position just before, and then move it back to the end of the slide, the result is faulty mouse behavior. It moves very slowly over the first part of its arc, then either skips suddenly to the destination or doesn't complete the arc at all when the slide advances to the next slide.
Audio. Sometimes the audio for a single slide will not play. This is intermittent and unpredictable, like the screen corruption bug. The problem sometimes goes away after moving the mouse on the timeline slightly, but this isn't reliable.
In any case, moving the mouse away from the end of the slide is not a desirable workaround, even when it does work. The delay between the "click" and the slide transition looks sloppy, and is contrary to the expected mouse behavior (to quickly trigger a slide transition).
I have been working with two people at Adobe tech support, but we have not found a solution or isolated the problem. I've also documented several keystroke bugs on this forum. So, after nearly 3 weeks of aggravation, I have concluded that Captivate 6 for Mac has serious bugs and is not reliable. I am forced to go back to Captivate 5.5.

I have experienced the exact same issues. I've republished files over and over again with unpredictable results. Missing audio, ghost backgrounds, visual artifacts. That doesn't even begin to address the other major annoyances like the stage jumping around when you do things like adjust element properties, audio editor opening up half off the screen so that it has to be manually dragged back EACH TIME.
I'm totally frustrated and disgusted with the quality of this product. I don't care one bit about all the new features it has, I just want the featues that are there to work right and work reliably. Today alone, I lost over 4 hours of productivity to resolving buggy software issues... I'm not exaggerating, 4 HOURS !. This is absolutely unacceptable. The software does NOT work well at all. Adobe should be horrified with how bad this software performs. I can't say enough negative things about this without using expletives that are well deserved.
After purchssing adobe software for 25 years, I am running out of patience. They are too big and too focused on new features instead of just making the ones they have work well. I used to love Adobe more than any other software company. That is definitely no longer the case. I have no intention of up doing any more upgrades after this. If these APPALLING blatant issues are not resolved before they release version 7, I will not upgrade and may well consider enlisting others in a class action suit. Fire all the developers who have a hand in this. Fire all the managers who signed off on it's readiness. Go back to the drawing board and make this right.
I fully intend on posting this in every forum I can find. This software has cost me too much time and money.

Paragon NTFS for MAC vs HFS for Windows?

Hey fellas!
Which of these 2 would you say it makes more sense to have in a bootcamp environment with a drive exclusively for data storage:
NTFS for MAC or HFS for Windows?
My setup is drive 1 for both OSs, MAC and WINDOWS, and drive 2 would be then formatted in HFS or NTFS, for putting files and data which I'd use CONSTANTLY to share between the 2 OSs.
What do you think?

Actually I really wanted to use exFat, but I'm afraid of the so-called lack of overall reliability (when compared to NTFS) and worse, the usual compatibility issues I've heard about between OSX and exFat. I'll be storing important files, work related stuff.
Do you know anything about that?
Otherwise I think I'll go with NTFS...

Transferring iTunes for Mac to iTunes for Windows

My son currently uses iTunes for Mac to store all his music he for his iPhone. His iTunes is on a PowerBook G4, running OS X 10.4.11, which he now finds can not be upgraded to Leopard or Snow Leopard which would give him the latest version of iTunes. He is now thinking of purchasing a PC laptop that will run the latest version of iTunes. BUT, all of his music is on his Mac PowerBook. Is there way to transfer his music on iTunes for Mac to iTunes for Windows?

Chris,
Thank you for responding. I only went by what my son said. I will check out Leopard's system requirements. Do you know if music stored on iTunes for Mac can be transferred to iTunes for Windows. If so,what I do to transfer the music?

In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Differences between CC for Mac and CC for Windows

Hello,
I just read here in the forum that possibilities regarding app-making in InDesign are limited when you are a Windows user. Seems like the "Create App"-possibility is for mac users only. Terry White made a very good video about app-making, but failed to mention that you needed not only CC (or CS6), but also a Mac.
Be that as it may, I would like to know if there is a list somewhere, describing in detail the differences between possibilities and options on CC for Windows compared to CC on a Mac.
And - if there is no list, can anyone tell me the differences?
Regards,
MikHva

Thanks for the answer. I can see that I messed up formulating the last entry - what we are about to do is upgrade from CS6 to CC.
Maybe you could help me with a related question. The last few days I have been searching for alternatives to builing my apps in InDesign, and I turned to Dreamweaver. I copied the CSS from InDesign to dreamweaver, fixed the content and made my app work through my 1 phonegap build-project (the InDesign version looked better, though) - but getting on fra Dreamweaver to Android and iOS involves Phonegap.
I can see that Adobe has developed the Adobe Phonegap Build. Is that a program (app) that I can acces after subscribing to the Creative Cloud? A friend of mine has the CC-version and I asked if she had acces to install Adobe Phonegap Build, but it was not on her list of programs to install.
- As things look right now we might be going for a Pro or Enterprise version - but I haven't figured out the difference between the two yet - I've been busy with Dreamweaver.
Sincerely and with thanks,
MikHva

Help for Mac Browser Launcher for jvm 5 for Mac OS X 10.5.1

hi im using Mac OS X 10.5.1 and im having a java code BrowserLauncher.java which works properly for earlier verioson of Mac but its not working on this version on jdk1.5. can anyone suggest me how can i get a browser launcher in java for Mac Os X 10.5.1. im using here jdk1.5.
im providing code below which im using right now..    public static void openURL(String url) throws IOException {
        if (!loadedWithoutErrors) {
            throw new IOException("Exception in finding browser: " + errorMessage);
        Object browser = locateBrowser();
        if (browser == null) {
            throw new IOException("Unable to locate browser: " + errorMessage);
        StringBuffer sbUrl = new StringBuffer();
        int urlLength = url.length();
        for (int i = 0; i < urlLength; i++) {
            char urlChar = url.charAt(i);
            if (urlChar == ' ') {
                sbUrl.append("%20");
            } else {
                sbUrl.append(urlChar);
        url = sbUrl.toString();
        switch (jvm) {
            case MRJ_2_0:
                Object aeDesc = null;
                try {
                    aeDesc = aeDescConstructor.newInstance(new Object[]{url});
                    putParameter.invoke(browser, new Object[]{keyDirectObject, aeDesc});
                    sendNoReply.invoke(browser, new Object[]{});
                } catch (InvocationTargetException ite) {
                    throw new IOException("InvocationTargetException while creating AEDesc: " + ite.getMessage());
                } catch (IllegalAccessException iae) {
                    throw new IOException("IllegalAccessException while building AppleEvent: " + iae.getMessage());
                } catch (InstantiationException ie) {
                    throw new IOException("InstantiationException while creating AEDesc: " + ie.getMessage());
                } finally {
                    aeDesc = null;
                    // Encourage it to get disposed if it was created
                    browser = null;
                    // Ditto
                break;
            case MRJ_2_1:
                Runtime.getRuntime().exec(new String[]{(String) browser, url});
                break;
            case MRJ_3_0:
                int[] instance = new int[1];
                int result = ICStart(instance, 0);
                if (result == 0) {
                    int[] selectionStart = new int[]{0};
                    byte[] urlBytes = url.getBytes();
                    int[] selectionEnd = new int[]{urlBytes.length};
                    result = ICLaunchURL(instance[0], new byte[]{0}, urlBytes,
                            urlBytes.length, selectionStart,
                            selectionEnd);
                    if (result == 0) {
                        // Ignore the return value; the URL was launched successfully
                        // regardless of what happens here.
                        ICStop(instance);
                    } else {
                        throw new IOException("Unable to launch URL: " + result);
                } else {
                    throw new IOException("Unable to create an Internet Config instance: " + result);
                break;
            case MRJ_3_1:
            case MRJ_4_1:
                try {
                    openURL.invoke(null, new Object[]{url});
                } catch (InvocationTargetException ite) {
                    throw new IOException("InvocationTargetException while calling openURL: " + ite.getMessage());
                } catch (IllegalAccessException iae) {
                    throw new IOException("IllegalAccessException while calling openURL: " + iae.getMessage());
                break;
            case WINDOWS_NT:
                // Add quotes around the URL to allow ampersands and other special
                // characters to work.
                Process processNT = Runtime.getRuntime().exec(new String[]{(String) browser,
                        FIRST_WINDOWS_PARAMETER,
                        SECOND_WINDOWS_PARAMETER,
                        THIRD_WINDOWS_PARAMETER,
                        url});
                try {
                    // This avoids a memory leak on some versions of Java on Windows.
                    // That's hinted at in <http://developer.java.sun.com/developer/qow/archive/68/>.
                    processNT.waitFor();
                    processNT.exitValue();
                } catch (InterruptedException ie) {
                    throw new IOException("InterruptedException while launching browser: " + ie.getMessage());
                break;
            case WINDOWS_9x:
                Process process = Runtime.getRuntime().exec(new String[]{(String) browser,
                        FIRST_WINDOWS_PARAMETER,
                        SECOND_WINDOWS_PARAMETER,
                        url});
                try {
                    process.waitFor();
                    process.exitValue();
                } catch (InterruptedException ie) {
                    throw new IOException("InterruptedException while launching browser: " + ie.getMessage());
                break;
            case OTHER:
                // Assume that we're on Unix and that Netscape is installed
                // First, attempt to open the URL in a currently running session of Netscape
                try {
                    process = Runtime.getRuntime().exec(new String[]{(String) browser,
                            NETSCAPE_REMOTE_PARAMETER,
                            NETSCAPE_OPEN_PARAMETER_START +
                                    url +
                                    NETSCAPE_OPEN_PARAMETER_END});
                } catch (IOException exc) {
                    // Netscape does not exist; try Mozilla
                    browser = "mozilla";
                    process = Runtime.getRuntime().exec(browser + " -remote openURL(" + url + ")");
                try {
                    int exitCode = process.waitFor();
                    if (exitCode != 0) {
                        // if Netscape was not open
                        Runtime.getRuntime().exec(new String[]{(String) browser, url});
                } catch (InterruptedException ie) {
                    throw new IOException("InterruptedException while launching browser: " + ie.getMessage());
                break;
            default:
                // This should never occur, but if it does, we'll try the simplest thing possible
                Runtime.getRuntime().exec(new String[]{(String) browser, url});
                break;
    }

keeskist wrote:
It's actually not that hard, take a look at http://developer.apple.com/documentation/Java/Reference/1.5.0/appledoc/api/com/apple/eio/FileManager.html#openURL(java.lang.String)
That's what is in the first reply

Office for Mac and Office for Windows XP compatibility issues?

Trying to convince a family member to make the Mac switch. She uses Office for Windows XP at work but might use Office for Mac at home. Will there be an compatibiity issues with the programs? She is a heavy Excel user and takes a lot of work home. If she has to rearrange cells and fonts and such each and every, it would drive her (and the rest of us) insane.
Any advice would be most welcome.
She is looking into either a Macbook Air or Macbook Pro. Putting Windows on the Mac is not really an option for us.
Thanks Community!

Or I could just download the trial version and see how that works.
http://www.microsoft.com/mac/trial
Thanks for putting me in the right direction, anyway!

Office for Mac 2011: Tips for speeding up Word when using tracked changes and comments?

I run a fresh installation of Office for Mac 2011 (v. 14.4.1) on a brand new Macbook Pro 13" Retina 2.4GHz with 16GB RAM running 10.9.2. The Office package is fully up-to-date.
I mainly use Word and find that it is extremely slow when I track changes. Documents need not be particularly large - even in a 30-page document after a few pages of tracks typing becomes a pain, in particular in comment bubbles where the text shows up letter-by-letter and only finish several seconds after I've stopped typing. Other programs run at the same time do not suffer from this horrible lag.
I have searched and seen that this is not uncommon so it appears that Microsoft's coders are not particularly well versed in coding for Mac.
My question is if other users have found ways to improve the situation, for instance by trashing plists or something like that? This is really driving me crazy
Many TIA
Philip

You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Apple physically replaced the HD on my Imac. I backed up everything on a Seagate Go Flex Desk for Mac external drive for Mac. I went through the motions to restore my Iphoto Library back to my computer. Can't find them!!!!!

Apple replaced my hard drive on my Imac. I'm lucky I backed up everything on a Seagate Go Flex Desk for Mac external drive via Time Machine . I followed directions in order to restore my iphoto library , but I can't seem to find it on my computer. Are the files locked?

No reason to assume they are locked. The library will be restored to the location it was backed up from, unless you specified somewhere else. Have you looked in your Pictures Folder?

Adobe elements for Mac and CS5 for Mac

Hi, I have two full licenses for photoshop, one for elements and one for CS5. Would it be possible for me to swap the Elements 8 (mac version) for Elements 8 for PC. I want to teach my son to use Elements for his college work, while he has a PC and I have a mac. I bought the Elements for a course that only used Elements but quickly as I moved on I had to use full CS5. I can't remember if I used the elements serial number to upgrade to CS5, where I should have CS4 serial number.

Hi,
As per adobe policy on cross platform swap : http://kb2.adobe.com/cps/405/kb405819.html.
"You can swap only current versions. If you have a previous version, you cannot swap to a different platform or language of the previous version--instead, it's necessary to upgrade."

Outlook 2011 for Mac Data is corrupt Mail could not be sent Error code: -19943

Why am I constantly getting this error?
What does this error mean?
How do I fix this?
This MacBook Air belongs to a VIP in our company. She is under the impression that she has received a lemon, due to the following experiences (verbatim):
Random beeping noise coming from machine. Unexplainable. No obvious pattern.
Machine randomly sounds like an airplane taking off. Fan running constantly.
Unable to view Sent folder in Outlook. Periodically.
Unable to view Sent items. Periodically.
Calendar items/invites/meetings do not display accordingly.
Unable to accept/decline meeting invitations.
Pinwheel constantly displays. Forced to reboot due to freezing.
Constantly receiving 'Data is corrupt' error message in Outlook.
Constantly receiving 'An internal server error occurred. The operation failed' in Outlook.
I understand the majority of these issues points towards the Office/Outlook application, but why don't any of the troubleshooting methods resolve or alleviate any of the aforementioned symptoms at all?
No one else in my company with this software is receiving this message.
I have rebuilt the database 3 times.
I have reinstalled the software twice.
All software is up-to-date.
Why doesn't Apple support this software?
Why doesn't Microsoft support this software?
Every forum I search regarding Office for Mac results in a never ending loop of both companies panning the issue off to the other and nobody takes responsibility.
Is there anyone out there willing to take the time to assist me and fully exhaust their knowledge to present some sort of solution towards this issue?
I am fully committed to this discussion and will provide any and all information needed in order to fix the issue.
Why are there other users with the same software who are NOT experiencing the same issues?
As a last resort, I am aware backing-up the profile/account and restoring the OS is an option. What if this plan of action doesn't solve anything? What if the problem persists?
My technical knowledge of Apple/Mac devices is limited, and I would appreciate any advice/suggestions/support on the matter, as this is a high priority issue and I would like to learn from this so as to avoid any similar issues that I may encounter in the future.
Thank you in advance for your help.

Hello Warren, which Mail App?
Generally,
SMTP error 554 (Transaction failed) is one of the most vague error codes, but is typically caused by something in the From or To headers that server doesn't like.
In other words, the problem is in the sender or recipient email address.
It can be caused by
The sender address isn't valid.
The server thinks this email is spam or server IP address has been blacklisted
A spam trap identifying your machine as a relay, or as a machine not trusted to send mail from your domain.
http://www.fox.ra.it/forum/13-submissions-via-email/444-smtp-error-5-5-4-transac tion-failed.html
To see if it's your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.

Outlook 2011 for MAC keeps asking for password

Outlook for MAC 2011 keeps asking me for google password. It wont accept what i put in. The password is correct along with name because it works when I enter it in google. I recently updated password.
Need help in fixing or finding problem.
Error message: Mail could not be received at this time.
The server for account Gmail returned the error (authentification failed) invalid credentials.
Failure: You username/password or security settings may be incorrect.
But they are correct as I can logon to Google without problem.
Could it have anything to due with two stage security in google?
Nick

Hi Steve,
Thanks for this-yes, eventually, I do send/receive fine, once I've poppedd my passwords in.
I think you are right in that BT seem to be having unique server/login issues...at least this is what I've read elsewhere too.
Iroonically, this AM I opened my new Mac and have *not* been asked for passwords so perhaps the changes I made in the settings yesterday (keychain reset in Mac) and also changing it from smtp.....to mail.btinternet.com solved the issue...who knows? All I know is this last week I've nearly lost the will to live on more than one occasion, from the transition from PC Windows Live Mail to Outlook for Mac.

Upgrade to Acrobat XI for Mac with Liscence for Win possible?

Hi Comunity, I have a liscence for Acrobat Standard 9/ Win. I want to upgrade on XI for Mac. Is this possible or do I have to purchase a new liscence?
Thanks for help.

Yes, you can switch the platform during an upgrade. just make a respective selection during checkout.
Mylenium

How to install and setup macports for mac os mavericks, for open vpn purpose.

Hi Guys! I'm using OS Mavericks now in my macbook pro, I need help and suggestions regarding open vpn application that i can use for my laptop so that i can access my server in my office even im out of town and country. I found vpn network setup in network preference but i dont know how to setup. also others are suggesting macports for mac but still difficult to analyze and setup. I need to troubleshoot in terminal which i'm not familiar with commands. Please help me guys! Please!

You're going to need to figure out the required settings for the VPN server you're working with, whether you use the standard client or some add-on. That information is a prerequisite for a VPN client; for any VPN client.
If the standard VPN client present in OS X doesn't and cannot be gotten to work, then something like IPSecuritas or the OpenVPN client would be a typical fallback choice, but IPSecuritas is far more flexible — which means far more complex. These clients are available as application downloads; no Brew or MacPorts required.
Is this your server you're connecting into? Or is somebody else controlling it?
If it's your server and thus your VPN server, then you'll have the option to get either the VPN server in the gateway firewall box or the VPN server running in the target system configured to allow the OS X VPN client to work.
If the server is controlled by somebody else, ask them for the settings necessary for the VPN client.
As Barney-15E states, using Brew or MacPorts won't help, unless you're installing the VPN client that way — which would be a little unusual — and you're still going to have to figure out the L2TP / IPSec or PPTP or other settings here, irrespective of how the VPN client gets installed.

Desperately looking for mac.h header for Solaris 10u7 (NOT opensolaris)

Similar Messages

Maybe you are looking for