Despite being set to 'enabled', Z68Intel SpeedStep not working with overclock.

Here is a screenshot of my modest 24/7 overclock on my Z68A GD80 (G3) mobo:
http://imageshack.us/photo/my-images/87/cpuzcpu.png/
http://imageshack.us/photo/my-images/580/cpuzrams.png/
Problem is, that the screenshot was taken when system was idling, yet the mobo has not recognised that my system is idling and therefore I am merely wasting energy by sitting with my CPU at 4.6Ghz. I o/cd my previous CPU (which I have had for 4 years) by more than 30% of its default clock yet the mobo still recognised when the 4Ghz was not required and underclocked it to 2.6Ghz (by reducing multiplier).
I am hoping that there is some setting that I have overlooked (which has been the case a few times already for problems I have had with this mobo), but I can state, that in the bios setting, 'Speed Step' is set to enabled.

Quote from: Bernhard on 24-October-11, 02:32:05
With Sandy Bridge things changed slightly.
Manually change your base multi and /or your VCore and they will stay there.
This is being moved to the OC section.
The trick is to leave your "Adjust CPU Ratio" at 33 or 34 depending on the CPU used. Then open up your last item in the OC section (CPU Features), and then adjust the 1/2/3/4-Core Ratio Limit.
Most of these boards will clock in Auto to at least X43-X45 when all is left on Auto. Just disable EuP2013 and Spread Spectrum.
Thanks for the tip! I tried using the method of leaving everything on auto, and adjusting the CPU core ratios in the section of the bios you mention above. However, since my PC couldn't even post using this method with x42 (4200MHz intended oc) set across all four chips, let alone 43-45. I would have taken a slighlty lower overclock than my 4.6 Ghz in exchange for the power saving functionality but not if it meant losing 500-600 Mhz (and possibly even more) of CPU horsepower.
But this is a pretty bloody annoying change on Intel's part....
......overclock and lose the built in power saving feature!?
I mean ?

Similar Messages

"Enable Legacy Encoders" not working with QT Version 7.5.5 (249.24)

I have Quicktime Pro Version 7.5.5 (249.24).
When I check the box "Enable Legacy Encoders" in the QT system preferences the box does
not stay checked. (that is I check the box, close System Preferences, but then when I go back to System Preference the box is not checked.)
How can I enable legacy encoders ? Is anyone else having this problem ?

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention in order to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac you are using, what operating system, and what version of the application in question.

ITunes Only Burns At 8X (Despite Being Set At 16X)

Hi, I recently noticed that whenever I burn a CD with iTunes now, it burns rather slowly even though I have it set to burn at 16x. iTunes doesn't show what speed it's actually burning at but I figured it must be burning at 8x since it now takes about twice the normal amount of time to burn a disc. For example, it just took me approx. 7 min. to burn a CD with 16 tracks (56 min.). I decided to burn the same playlist (with the same CD-R media) using Burrrn with the speed set at 8x and sure enough it took about the same time (7 min.), confirming my suspicion that iTunes is burning at 8x (despite being set to burn at 16x). What would be the cause of this? I've even tried to set it at different speeds like 12x, 24x, etc. but it still seems to burn at 8x. Thanks for any help.
Message was edited by: FirewalkerAHA

I also forgot to mention that whenever I burn with iTunes now a text file named GEAREXT.WOIDENT shows up on my desktop. This is what it reads (it's obviously information sent by iTunes to the burner):
Mastering information file to accompany premaster tapes and CD/DVD discs.
GEAR image building and premastering software, GEAR Software 2007.
Mastering order references (customer information):
- Customer name:
- Customer contact:
- Telephone number:
- Origination date: 12-7-2007
- Master ID code:
- Customer reference code:
- Disc title:
Disc image related information for mastering:
- Number of tracks: 14
- Recommended LEAD IN period for mastering: 180 seconds.
- Recommended LEAD OUT period for mastering: 210 seconds.
Track table for mastering:
TRACK INDEX CONTR NR OF TYPE PRESENT SECTOR START TIME DESCRIPTION
FIELD SECTORS ON DISC SIZE MIN SEC FRM
01 00 0000 150 CD-DA YES 2352 00 00 00 pause
01 01 0000 11059 CD-DA YES 2352 00 02 00 audio track
02 01 0000 36884 CD-DA YES 2352 02 29 34 audio track
03 01 0000 17706 CD-DA YES 2352 10 41 18 audio track
04 01 0000 8896 CD-DA YES 2352 14 37 24 audio track
05 01 0000 13178 CD-DA YES 2352 16 35 70 audio track
06 01 0000 11519 CD-DA YES 2352 19 31 48 audio track
07 01 0000 17162 CD-DA YES 2352 22 05 17 audio track
08 01 0000 30374 CD-DA YES 2352 25 54 04 audio track
09 01 0000 20834 CD-DA YES 2352 32 39 03 audio track
10 01 0000 25930 CD-DA YES 2352 37 16 62 audio track
11 01 0000 21576 CD-DA YES 2352 43 02 42 audio track
12 01 0000 8579 CD-DA YES 2352 47 50 18 audio track
13 01 0000 13302 CD-DA YES 2352 49 44 47 audio track
14 01 0000 20254 CD-DA YES 2352 52 41 74 audio track
aa 01 0000 15750 CD-DA YES 0 57 12 03 lead out
- Cue Sheet format sent to the recorder:
Contr/Addr Track Index Data-Mode ZERO MIN SEC FRAME
01 00 00 01 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 02 01 00 00 02 1d 22
01 03 01 00 00 0a 29 12
01 04 01 00 00 0e 25 18
01 05 01 00 00 10 23 46
01 06 01 00 00 13 1f 30
01 07 01 00 00 16 05 11
01 08 01 00 00 19 36 04
01 09 01 00 00 20 27 03
01 0a 01 00 00 25 10 3e
01 0b 01 00 00 2b 02 2a
01 0c 01 00 00 2f 32 12
01 0d 01 00 00 31 2c 2f
01 0e 01 00 00 34 29 4a
01 aa 01 01 00 39 0c 03

Why does the newest FF keep me signed in to websites when I log off despite being set to full time "private browsing"? This is a real problem on a shared computer!

Despite being set to full time "Private" mode, this latest version of FF keeps me logged into things like ebay etc.
This has never happened with previous versions and is a real problem.

Are you restoring pages from the previous session if you start Firefox?
*https://support.mozilla.com/kb/Session+Restore
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

TACACS enable password is not working after completing ACS & MS AD integration

Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,

Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles"

Downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

downloaded yosemite continuity is not working with my iPhone 6. Both on same wifi network and iCloud account.. not sure how to set it up any help is appreciated

Connect your iPhone, iPad, iPod touch, and Mac using Continuity

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Why is Emoji Keyboard not working with iOS7....??? Is there any setting which I am missing? Can anyone help

Yes. you should keep your media in iTunes, and indeed you should also keep a backup of your library as well. if you have the device set up for manual management then the content would remain on it when deleted from the library, but you would have no way to restore the device if there was a problem.
See also: Getting iTunes & Windows Media Player to play nicely
tt2

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
I also cannot update ios..how to solve this problem..?

Your going to have to perform a restore.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
Message was edited by: Diavonex

HT3702 how do I cancel an application that I am being billed for monthly that does not work

How do I cancel an application that I am being billed for monthly that does not work anymore?

How to report an issue with Your iTunes Store purchase
iTunes Store: Purchasing and managing auto-renewing subscriptions

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

AIM not working with messages

Hello,
My AIM account has not worked with ichat or messages in the last few months. I called Apple about this over 3 weeks ago and they said their is a glitch in the lion software and aim? However, all of my friends have no problem with their aim accounts working. I have downloaded AIM and everything works. It just does not work in ichat/messages after re-setting the password and re-adding the account. Help!

Yes, enabling and disabling the AIM account (sometimes it takes doing it a few times) seems to work. And I found elsewhere that opening activity monitor and killing off the imagent process (which then automatically relaunches) seems to work as well. Those workarounds are not permanent solutions for me though. As soon as the iMac is either restarted or shut down and then turned back on... Messages seems to be right back at square one with not being able to connect to AIM unless I use the workaround again. I just hope Apple can figure out what is going on and fix the app before it goes final.

Dreamweaver CS 5.5 not working with Godaddy FTP with TLS/SSL

I've upgraded to CS 5.5 and tried to connect to a client's Godaddy account with FTP with TLS/SSL it fails. Works perfectly with my mac app Transmit every time as it always has. It doesn't work with implicit or explicit settings with authentication set to none or otherwise.
Can someone please let me know if Dreamweaver will ever be compatible with FTP with TLS/SSL and Godaddy? Or is there some setting I can try that will make it work now somehow?
Been waiting years for this....

SnakEyez02 wrote:
First, that's a Godaddy problem if their security isn't up to par.
That may be the case that Godaddy is also at fault, but every other FTP app I use with Godaddy works fine. It's just Dreamweaver and has always been just Dreamweaver not working with a secure connection to Godaddy. Considering Godaddy is the largest webhost in the USA, you'd think Adobe would have fixed this years ago. I should also mention I'm not endorsing Godaddy and I understand there's plenty of people that don't like Godaddy for very good reasons.
Sent you PM with FTP account with Godaddy yesterday. Thank you for taking a look!
UPDATE: Whoops, I see you responded via private message already. I'll paste most of it here in hopes it helps others to understand the issue:
via SnakEyez02 PM:
Ok this took a lot of digging. I won't say it's not a DW issue 100% and I will report a bug for your problem, but DW is not the problem alone Godaddy needs to share the blame here for a bad certificate. Here is what is happening:
I'll start with DW:
- The settings are correct that were in the post. Port 21, FTP explicit, and the authentication should be set to None (encyprtion only). This is where the transmission is encrypted using SSL, but the certificate is shared and not specific to the domain owner. That is the difference between DW's "none" and "trusted". It's a poor choice of words I'll give them that. However, Godaddy seems to want all connections to be trusted thus the other error you get when you turn on the None option. Now could DW do what Transmit does, warn you and write in an unsigned certificate into the Keychain app, probably, is it best practice for security reasons to "Trust" an unsigned certificate probably not.
Now Transmit:
- As explained above Transmit opens up a prompt to override and create a fake-trusted signed certificate. Thus by forcing the OS to think a legitimate certificate is there it gets you through albeit through unconventional methods.
The problem:
- A good portion of this problem lies with Godaddy. Now I use a shared hosting account and set one up on an independant host for a friend of mine and both of them accept the shared certificates (SSL explicit). The difference is the hostname of the certificate. I ran a traceroute (from Network Utility in Utilities folder) on your website and came up with the following address: 173.201.23x.x.
The problem is that the certificate on your server is actually not for that server which is the reason DW seems to have such an issue with it. The SSL certificate that Godaddy put on your shared server is for host - 173.201.19x.5x. As you can see, it's a certificate for another server. Honestly the fact that Panic's Transmit allows this override scares me a little bit and the fact that Godaddy never noticed this issue either scares me to. So while DW could write in a bad certificate I can see why this is happening.
I know there is not much solice in my answer because it still doesn't alleviate the problem that you have with DW connecting. Unfortunately I do not have a workaround despite my numerous attempts to try and gain access over a secure connection. One alternative you could ask Godaddy for in the meantime is an SSH connection which would allow you to use SFTP instead of FTPS. But that's a short-term solution to a long-term problem.
If you think of anything else feel free to bounce any ideas off me I don't mind. Good luck in getting this solved and I will post a bug report to make Adobe aware of the issue.
Thank you for looking into this issue in depth like you have!
I think the issue might be that Godaddy is applying cost saving measures to keep their prices down in the way they implement their certificates (but it also wouldn't surprise me to know it's simply ineptitude on Godaddy's part either). I'm not sure I fault Panic with Transmit much at all because it clearly warns you about the certificate and it's your choice to continue. And, as it stands now, it's much safer to continue to connect that way with Transmit than to stop and connect with no encryption at all at a public hotspot.
As it stands now, you really shouldn't connect to Godaddy with Dreamweaver at a public hotspot unless you set up an SSH tunnel with your connection first. But enabling SSH is an added expense in many ways including paying for the service, using more computer resources for tunneling and time setting it up and implementation... all because Dreamweaver won't just allow developers the option like Transmit does.
Once again, thank you for looking at this and I hope someone at Adobe finally address this issue for the security of its customers who use Godaddy (which is often not their choice and was, instead, the choice of their clients to use Godaddy as a webhost).
Just a side note, I contacted Godaddy support about this several years ago and they were unresponsive and even hostile about it - So that's definitely another vote against Godaddy from me as well.
Message was edited by: greenbluewave

Despite being set to 'enabled', Z68Intel SpeedStep not working with overclock.

Similar Messages

Maybe you are looking for