Despite having AIR3.0 and FlashPlayer 10.1 installed on android emulator, not able to show a SWF
a) I tried to view a SWF in a HTML file using WebView. I see a message asking to get Flash Player. Somehow, the emulator is not able to find Flash Player it is installed in the emulator.
BTW I am using Android SDK 2.3
b) I create a mobile app using Flex 4.5.1 and installed the apk on android. The app has one view that shows SWF in a local HTM file using StageWebView. I was able to test the app using Flex's emulator.
But in the android emulator, when I get to the view that shows the local HTML file - it asks for FlashPlayer to be installed.
Any leads??
It seems Flash player does not work Android Emulator. We can test it only on actual devices
Found it in this link
http://groups.google.com/group/android-developers/browse_thread/thread/ad607b175e881df5
Similar Messages
-
Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help....
Next time try to create a topic that is not the question.
There was no option to remove epm instances in 11.1.2.1, basically the cloest you get is uninstalling the products on the server and hope that some of the info is removed from the epm registry
Cheers
John -
Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. GlenysThis may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
RajeshSee this discussion...
https://discussions.apple.com/message/23731048#23731048 -
When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
After having ugraded my iphone 4s at ios 7 i'm not able to instaIla any apps
After having ugraded my iphone 4s at ios 7 i'm not able to install any app. Is it a known problem? Is there a solution? It isn't neither a trouble with the account because on my ipad works, nor a trouble of memory, i tried to free some space.
Thanks for the prompt response,
I think iTunes store is not available in Nigeria right now !.
http://www.apple.com/ng/itunes/ -
I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?
There's a bit to learn. It will slowly make sense.
Aperture is an empty field. You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
Vaults are for back-up and only for back-up. They have nothing to do with storing your working files.
When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced. ("Managed" and "Referenced" refer to Masters, not to Libraries.)
There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives. This is a good set-up. Note that you will likely have to take steps to back-up the data on your external drives.
If you do the above, there should be no reason to delete any Projects.
The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing. I capture RAW only -- but I don't do any commercial shoots. Pros on deadlines report that the RAW+JPEG works well for them. Capture JPEG if it saves you time. IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive. (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
This general post of mine might help you understand more about Aperture. -
Last week I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
I upgraded to ios 6.1 and now wifi is hardcoded 'off' I am not able to set it as on
Does any body have solution to above problem.......This is iCloud forum. For iPhone issue go to the Using iPhone forum
Anyway try this
IOS: Wi-Fi or Bluetooth settings greyed out or dim.
http://support.apple.com/kb/TS1559 -
There is a message on my Firefox header that says: "Firefox is not able to show the Toolbar. Please re-install the Toolbar." I would like to re-install the Toolbar, but don't know where to locate it for download. It has conveniences I use frequently & I'd like to get it back. Thank you for your help.
Firefox has a couple of built-in toolbars, but if it mentions re-installing, it probably is an add-on toolbar. Do you know which one it was, e.g., Google, Yahoo, etc.? It might be on your extensions list here:
Tools > Options > Extensions -
i canot remember my security questions answers , whene ever i want to dowload any applications i am required to answer them and because i have forgot them i am not able to download any application , i would like to cancel this option and only have the option to answer my password
It isn't an option it is a permanent part of the security protocol, so you need to write the answers down in a secure location or remember them, you will always need them in the future.
Call Apple Care for your country and ask for the Account Security Team, then request help resetting the questions. -
I just purchased an Iphone 5 and i cannot sync it because I'm not able to update my itunes because I'm not able to update to Osx 10.7?
Apple is selling Mac OS X 10.6 on their online store, and 10.7 by phone. The latest version of iTunes requires 10.6.8 or newer.
(72029) -
My daughter has an iPod and FaceTime has stopped working as she is not able to verify her email address please can you help.
As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
Try talking first -
Hi I hv bought my iPhone 5s from Dubai and using it in India. I m not able to use FaceTime. Please help to enable FaceTime in my iPhone 5s.
What is the model number of your iPhone? Settings=>General=>About, scroll
down to Model.
FaceTime is restricted in certain Middle East countries and iPhones designated
for those markets will never have FaceTime, even when no longer in the restricted
areas. -
Have two browsers, Chrome and Chromium, flash is installed on one but not the other
Hi All,
I have spent a ton of time on this and am stuck.
I have two browsers, Chrome and Chromium, they both have separate profiles(Chrome has work profile Chromium has personal profile). The Chrome installation is fine, I have the plugins in the Chrome://plugins and everything is great.
The Chromium browser is not so great. I have tried the install maybe 30 different times. The scenarios are:
I have tried using the Chromium/Opera install-able
one with the browser closed
one with it open
I have tried the regular Chrome install-able
one with the browser closed
one with it open
I have tried the diagnostic tool: Installation problems | Flash Player | Windows - It says I have the plugin installed but it is not enabled. Then i look at the chrome://plugins and there are 3 plugins listed: Chrome PDF Viewer (2 files), Chromoting Viewer and Native Client, all of which are enabled.
I have tried to download and install directly from the installer site: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_ppapi.ex e
Any help would be really great.
Thanks so much.
SeanChrome comes with a built-in version of Flash Player. Everything else built on Chromium does not. Fortunately, there's a standalone PPAPI installer for Chromium-based browsers. It's only available for Windows at the moment.
Now, the browser itself may need to do some work to be able to discover and support Flash Player (particularly if they're not actively staying on the latest available PPAPI interface), so not every Chromium fork is going to work, and it's nowhere near as mature as the player in Chrome, but it's a thing that exists. We've been doing a lot of work with the Opera team on the PPAPI Flash Player, and Opera Next is an active Chromium-based project.
If you run into problems, please file bugs over at http://bugbase.adobe.com/.
Anyway, to get the download, use the link below.
Select Windows and FP 16 for Opera and Chromium:
Adobe Flash Player Install for all versions -
Hello,
I am using Macbook pro 2009 model. In that, when I tried to connect wireless network and wifi. I am not able to do. I have done R & D regarding this issue. Some them advice to do some below steps.
Restart your Mac.
upon start-up, hold down the Opt key until you see your drives.
click on the recovery drive (note: this will not affect or delete any files you currently have).
login if needed.
in the top right hand corner you will see the Wi-Fi icon (hopefully). Click the icon and then click "turn wifi Off" and then again click "turn wifi ON"
restart your Mac again and start it up normally.
recover from your near-heart attack.
I've followed your 1 to 4 steps & then after clicking on the wifi icon, I found Wi-Fi: No hardware installed just beneath the icon. That means no Wifi hardware is installed in this machine. Do you have any suggestion about installing it? I mean how can I get that hardware? Is it available on internet? Thanks a lot again.Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.
Maybe you are looking for
-
Problem with commandButton in a custom DataTable
I am trying to write a cutom DataTable and am having some trouble. I don't think that the DataTable that gets shipped has the flexibility that we need for our pages. That's why I'm trying to write my own. What I have is a commandButton in one of the
-
Project on demand/click to run not working in Project Online
Do I need to do anything special to allow the click to run functionality in Project Online to work? Or does it not work for Project Online? We have a Project Online trial, but when the users who do not have Project Pro on their desktops, try to selec
-
What technical programming skills needed to work in CRM 7.0
Hello Experts, I am a ABAPer working for CRM 4.0, now we are planning to upgrade the system to CRM 7.0. I would like to know whether CRM 7.0 is developed using Web Dynpro for JAVA or Web Dynpro for ABAP or BSP. I am planning on updating my skills. Ki
-
I want to send Net Weight for all packages to Requisite
HIo All Abapers, Currently the Each is the only package that has the true net weight. The net weight for the other package levels contains the gross weight. So Users are manually setting the correct net weight. Here I want to Change the interface pr
-
Folks, Can I know how to handle the below request? A supplier will invoice us in a foreign currency and we book the payable on our ledger in the foreign currency. When payment is due, we create an FX wire in the Bank's CashPro system. The payment v