Despite resetting the SMC, the battery still does not charge. Any quick fix here?

My MacBook Air is unable to charge the battery. Have tried resetting the SMC by pressing shift-ctrl-alt and the power at the same time and release them all at the same time. Hereafter I have pressed power on. Still it will not charge beyond 1%. Have tried an alternative power cord and adaptor for another MacBook Air from the same household, but no change here. Any quick fix ideas? My MacBook Air runs OS X Version 10.9.4. 1.4 GHz Intel Core iS, 4 GB 1600 MHz DDR3.

Sorry but it is in Danish language. Any good?
Batterioplysninger:
  Modeloplysninger:
  Serienummer:           C014311007QF90LAP
  Producent:                DP
  Enhedsnavn:             bq20z451
  Pack Lot Code:         0
  PCB Lot Code:           0
  Firmware-version:   511
  Hardwarerevision:   000a
  Cellerevision:           1210
  Oplysninger om batterispænding:
  Resterende kapacitet (mAh):   38
  Fuldt opladt:                               Nej
  Oplader:                                      Nej
  Fuld ladekapacitet (mAh):        7504
  Oplysninger om batteritilstand:
  Antal cykler:   3
  Betingelse:      Normal
  Batteri installeret:                               Ja
  Strømstyrke (mA):                              0
  Spænding (mV):                                  7107
Energiindstillinger til system:
  AC-strømforsyning:
  Interval for vågeblus for system (minutter):      1
  Interval for vågeblus for disk (minutter):           10
  Interval for vågeblus for skærm (minutter):       10
  Afbryd vågeblus ved ændret spændingskilde:  Nej
  Afbryd vågeblus, når skærmen slås op:             Ja
  Afbryd vågeblus via LAN:                                      Ja
  AutoPowerOff Delay:                                              14400
  AutoPowerOff Enabled:                                          1
  Aktuel strømkilde:                                                  Ja
  DarkWakeBackgroundTasks:                                 1
  Vågeblus dæmper lysstyrken:                              Ja
PrioritizeNetworkReachabilityOverSleep:            0
  Standby Delay:                                                         10800
  Standby Enabled:                                                    1
  Batteri:
  Interval for vågeblus for system (minutter):      1
  Interval for vågeblus for disk (minutter):           10
  Interval for vågeblus for skærm (minutter):       2
  Afbryd vågeblus ved ændret spændingskilde:  Nej
  Afbryd vågeblus, når skærmen slås op:             Ja
  AutoPowerOff Delay:                                              14400
  AutoPowerOff Enabled:                                          1
  DarkWakeBackgroundTasks:                                 0
  Vågeblus dæmper lysstyrken:                              Ja
  Formindsk lysstyrke:                                              Ja
  Standby Delay:                                                         10800
  Standby Enabled:                                                    1
Hardwarekonfiguration:
  UPS installeret:   Nej
Oplysninger om oplader:
  Tilsluttet:           Ja
  Id:                       0x07a1
  Watt (W):            45
  Familie:              0x0085
  Serienummer:   0x00f18097
  Oplader:            Nej

Similar Messages

  • HT3917 I cannot get my mouse to work, I have changed the batteries, but it still does not register any ideas???

    I cannot get my mouse to work, I have changed the batteries and it still does not work any ideas???????????

    Hello:
    Try resetting the SMC and PRAM.
    Barry

  • Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Make sure the silent switch is not set to mute.  If you can see the red dot, it is on mute.
    It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
    The next step would be to restore as new.
    If none of that works, a warranty exchange would be the resolution.    

  • My iphone 4s will not connect to networks.  the button is greyed out and cannot turn o.  I have reset the network settings and it still does not work - any ideas?

    My iphone 4s will not connect to networks.  the button is greyed out and cannot turn on.  I have reset the network settings and it still does not work - any ideas?

    Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem.  I just updated to 8.1.3  - I thought the update might fix it.

  • TS1367 My charger connects with my macbook with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery.

    My charger connects with my computer with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery. The power source to keep it on is the power adapter and that it's "Not charging" on the battery settings. And my charger seems to charge other computers fine.
    The part of my mac where the adapter (L-shaped, magnetic) attaches is a bit damaged - a small piece of the white case/body around the part where the adapter attaches is broken off, but that's just an outer damage.
    I don't know what's wrong with my computer, and if anyone has had a similar experience or knows what's going on, it'd be tremendously helpful!
    Thank you!!

    Hi Christopher,
    Doubtful an upgrade would fix a hardware issue. If you are thinking of upgarding to Lion, best to do all necessary maintenance first.
    Try Resetting the System Management Controller (SMC)
    If that doesn't help try here >  Apple Portables: Troubleshooting MagSafe adapters

  • My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

    My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

    Try perform below steps.
    Open task manager by pressing Ctrl + Shift + Esc  keys. Click on more details if the option available.
    Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
    Then hold windows key on your keyboard and Press R key.
    It will open Run window
    In Run window, type Appdata and click on Ok
    Open Local > Adobe folders
    Delete AAMUpdater and OOBE folders
    Then navigate to C:\Program Files (x86)\Common Files\Adobe
    Delete Adobe Application Manager and OOBE folders
    Go back to Program Files (x86) and Open Adobe folder
    Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
    Download and install Creative Cloud App from below link
    https://creative.adobe.com/products/download/creative-cloud
    Then check

  • I need to change my account name but even if I updated it in the Adobe website, Revel still does not update my name at all! ***Urgent***

    I need to change my account name but even if I updated it in the Adobe website, Revel still does not update my name at all! ***Urgent***

    Good morning,
    Glad your account is up and running!
    As a note, the Revel service is not going away any time in the near future. The apps that are no longer available as of Dec. 8 are Grouppix and VideoBite
    Glenyse

  • I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    Crich,
    The usual reasons for an Apple ID getting disabled are either unauthorized activity or violations of the Terms & Conditions. 
    Submit your request to iTunes Customer Service and if appropriate, they will re-enable it.

  • Unable to load the EJB module. DeploymentContext does not contain any EJB.

    I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
    SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
    SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
    SEVERE: Exception while preparing the app
    SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
    org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
    If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
         at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
         at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
         at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
         at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
         at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
         at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
         at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
         at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
         at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
         at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
         at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
         at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
         at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
         at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
         at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
         at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
         at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
         at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
         at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
         at java.lang.Thread.run(Thread.java:722)

    My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
    Are you sure you have implementend some beans? Or did you do this only in the web module?
    Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

  • HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

    I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s.  With the new iPhone 5 the radio shows the phone is conected but does not show any music content.  Any Suggestions?

    You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup.  If you haven't been doing this, start now and then restore your old backup.  You will then be able to sync the new contacts back into the phone.  However, you will lose all messages, etc newer thant the backup.

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

    I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

    Let me see if I can help you with the basic WDS configuration steps:
    Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
    802.11g AirPort Extreme Base Station (AEBS) Configuration
    AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
    Wireless Mode: Participate in a WDS network
    Manual Setup > WDS tab
    WDS Mode: WDS main
    Allow wireless clients (checked)
    WDS Remotes: <enter the AppleID for the AXn here>
    Click on Update and allow the base station to restart.
    802.11n AirPort Express Base Station (AXn) Configuration
    AirPort Utility > Select the AXn > Manual Setup > Wireless tab
    Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
    Manual Setup > WDS tab
    WDS Mode: WDS remote
    Allow wireless clients (checked)
    WDS Main: <enter the AppleID for the AEBS here>
    Click on Update and allow the base station to restart.

  • HT203171 My curser pad is not working and the curser is going crazy.  I have tried all of the above but it still does not work

    My curser pad is not working and the curser is going crazy.  I have tried everything and it still does not work?

    I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???

  • The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

    Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

    Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

  • The tracks menu in Galery does not show any music ...

    Hi,
    I have recently bought the E71. Looking at its various features, got interested to download some themes. I got these websites (to download themes) from the nokia discussion's page itself, so no worries there.
    Amazingly, when I finished downloading and loaded one of the themes, I noticed that the TRACKS in galery does not show any sub menus, you know like, all songs, playlistes, artists, etc.
    I tried uploading some new songs and got the same issue, though these tracks showed up in the file manager option and even played.
    I have formated the phone to factory settings but it didn't help. Now I'm going for a software update, but I don;t think that if the software is not updated the phone will give such issues.
    Please suggest and help. It's just been a month that I bought this costly handset.
    I really need a solution.
    Regards
    Aditya

    You need to go the "Music Player" and select "Options" and "Refresh". Let it do it's thing and then you should see music you uploaded.
    N97 (Product Code: 0585262 (Voda UK)) FW 12.0.026
    95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
    If a post by a user has been helpful, please click on the Kudos! button.

Maybe you are looking for

  • Alphabetize documents in iPad pages not imported in the same session

    I had to import over 40 files to iPad pages from Word 2007 on a Windows laptop. It was confusing to have to import one at a time and so I missed two or three. When I went back to add the missing ones they are then added to the end of the group rather

  • Hi all anybody    can contribute on how  to configure Freegood for  3 items

    HI all, Can anybody  share  how to configure   1 free good for 3 items.Ex: When we purchase A,B&C items system should give D as  a  free good. Thanks in advance, Ram

  • Current version of CP8

    What is the current version of CP8?  I have 8.0.0.145 on my machine and the update option in the help menu is grayed out.

  • How to age new photo to fit into older photo

    I am trying to take a current color photo, turn it into black and white then put the figures from the photo into a 50 year old black and white.   I can turn the new photo into black and white, I can cut the figure out and size it proportionally but i

  • Photoshop 8.01 Mac OS 10.3.9

    Seit über 20 Jahren arbeite ich mit Photoshop, aber wie man sehen kann ist mein letztes Upgrade schon einige Jahre her. Meine Frage: Werden in diesem Forum auch noch Themen behandelt die sich mit älteren Versionen von Photoshop auseinandersetzen?