Despite setting homepage only as startup I see tabs that have been closed before shutdown (FF8)

I was using FF7 and despite closing several tabs before closing FF on starup those tabs reappeared.In options I had set "show windows and tabs from last time" however when I tried setting "show home page "I still got all previous tabs.Updating to FF8 has not cured this fault

That's a comment in the file. It has no effect at all.

Similar Messages

How do I see Pictures that have been saved to TC via Cameras Wi Fi ?

Still getting to grips with my new camera and new Time Capsule. I have been trying, via Wi Fi settings on the Camera, to transfer pictures from the camera to my Windows 7 PC. The Wi Fi transfer worked in as much as they are now on the Time Capsule and can be viewed using File Browser from my iPad and iPhone but I can saccess the Time Capsule to see the pictures from my Windows 7 Computer. What am I doing wrong ? Perhaps it isn't possible to access the pictures on the Time Capsule from a Windows 7 Computer ? Thank you.

You should be fine.
Install airport utility for windows on the computer.. that helps loads.
Make sure the names are SMB compatible.. ie all names in the TC are short, no spaces and pure alphanumeric.
Then in windows explorer, type directly into the address bar..
\\TCname or \\TCipaddress.. where you replace those with the actual name or ip.
More things can go wrong of course.. from the windows airport utility access the file sharing and turn on the guest account to read and write access .. make sure the workgroup is set to WORKGROUP

I have 2 itune account and only 1 shows up with songs that have been purchased

I HAVE TO I TUNES ACCOUNT AND ONLY 1 SHOWS UP WITH SONGS THAT I HAVE PURCHASED. HOW DO I GET TO THE OTHER ACCOUNT

If u purchase something with one apple id account everything stay there you can not move ur purchase history to another account

How do i open iPhoto library to see photos that have been edited?

All my photos and changes to photos are apparently utomatically saving to iphoto library. How do i see these photos? Can i right click iphoto library and open and view the photos both edited and unedited?
Then can i save those photos to a flash drive or another folder?
As most of you know, if you double click on iphoto library, iPhoto will just open which is why its tough to find out where these actual files are.

There are no edited photos, essentially.
When you make a change to an image that decision is recorded in the database. So the edit is actually the Original photo+the change. To actually get an edited photo you need to export it.
There are two main ways to do this:
1. Using the File -> Export command which has a large number of options for what and where to export.
2. Use a Media Browser - this produces a file with the current version of the image.
So, if you're using Powerpoint you access the iPhoto images from Powerpoint via the Media Browser. You access this in PP by using the Insert menu.
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

[SOLVED] See what files have been modified from original package?

Is there a pacman command (or any command) that will tell me what files in the whole system have been modified from their original packaged state?
EDIT 8/31/2013 2:17pm: pacman now has the -Qk and -Qkk options to see files that have been modified, removed, touched, chmodded etc. This works only for packages that contain a valid mtree file. Not all packages contain an mtree file, but efforts by package maintainers are being made to include these in packages. Read more in `man pacman`.
Last edited by trusktr (2013-08-31 21:17:54)

There is no native pacman (or related) command, but I made it an habit of mine (coming from Slackware) to create backups of config files with a certain extension before modifying them.
Mostly they are tracked through pacman anyway (backup files), so whenever there's an update that creates a .pacnew file (see the section "handling config files" in the pacman manpage), I have a /etc/file.conf_orig to compare to.
I also try to keep my modifications as minimal as possible or to post feature requests on the bugtracker to get the maintainer to follow the upstream more closely.
That way you could see 1) your modifications with a simple diff between current config and _orig config and 2) what has changed in the update by diffing conf.pacnew and _orig.

Cost settlement only for assets that have been paid

Dear all,
i need to do, at the end of the month, the cost settlement from wbs to asset only for the the part of asset that have been paid.
I don' t know how to do this using standard sap funcionalities.
Theonly way that we think to use is:
- setlle of the entire wbs
- transfer posting (FI) from asset to wbs of the part that have not been paid.
Some of you can help me?
thanks
Elena

Hello friend,
Because I do not understand your requirement to capitalize from AuC to final asset only only those costs for goods/service that have been paid - I would like to give warning that you may not have the requirement correct.
This would not be your fault, but the fault of the accounting users giving you the requirement is my guess.
Receiving against PO may be MIGO, and then posting the vendor's invoice later on when it's received, is MIRO usually.
The actual payment to the vendor is a subsequent posting known as a check cut. The accounting for a check cut does not create the AuC value, nor does it meet any accounting requirement for capitalization.
The accounting requirement for capitalization in almost all countries would be MIGO. Because we have posted the receipt of goods or services, we now owe a vendor somewhere. The liability will be in your non-specific vendor account, GR/IR which stands for Good Received/Invoice Received. MIRO clears out the amount from your GR/IR account, moving it to your reconciling account in the g/l for a specific vendor sub-ledger account. The check cut then removes specific liability from reconciling account, and removes cash from g/l cash account.
Recognizing that we owe the cost of the goods receipt MIGO, it is already fair and required to capitalize the costs to final assets and commence depreciation expense (assumption you have placed the capital fixed assets into service).
So, neither MIRO nor check cut should delay your capitalization from AuC to final completed assets unless your requirement is different that SAP basic scenario. Regards

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

SAP report to see orders who have been TECO'ed

Hi All,
I am looking for a sap report to see all the orders that have been TECO'ed by date & plant. I know i can use COOIS & CO26 but i need something that will give me more options to exclude report output by more status types. Using these reports i can only select upto 2 statuses(for instance include status 'TECO' & exclude status 'OPEN'). Any help would be greatly appreciated & duly rewarded.

THis can be easily done in COOIS screen in the header level status option just maintain TECO and in the next TAB right to it write OPEN and mark exclude.
Hope this will help
Regards
AM

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My laptop screen when black now it will not turn on or off. And is there a way to see everything that has been done to my laptop at a apple store?

My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?

If I were you I would call Apple Customer Relations (800) 767-2775. Tell them exactly what you stated in your post in a polite way. See what they can do for you.
Nickc111209 wrote:
is there a way to see everything that has been done to this laptop through the apple store?
Yes. And also on Apple's repair history website.

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

I have ordered 3 albums from the itunes to my iphone and only 3-5 song from each album have been allowed to be downloaded to my phone yet i have still had to pay for the full album what do i do to get the other songs as im not happy to pay twice

i have ordered 3 albums from the itunes to my iphone and only 3-5 song from each album have been allowed to be downloaded to my phone yet i have still had to pay for the full album what do i do to get the other songs as im not happy to pay twice

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

How can I see which pictures have been backed up

How can I see which pictures have been backed up

All the pictures in your camera roll will be backed up in iTunes or iCloud (depending on whether you have iCloud backup enabled on your iPhone) every time a backup is performed. The other photos stored on your iPhone (i.e. the ones you didn't shoot using the iPhone itself) will NOT be backed up.
Nevertheless, it can't hurt to import them into iPhoto or Aperture (or whatever you're using) as roaminggnome suggested.

How see which questions have been answered?

I currently have a quiz with ten random questions from a single pool of twenty.
Currently I have a custom offline LMS running on a local server which displays the InteractionID of all ten of the questions that have been answered as well as the answers - it then goes on to display them graphically on one single page, this can then be printed.
Due to reliability issues and necessary access rights with the local server I'd like to build this function into Captivate.
I'd like to create a single page at the end of the quiz that shows the InteractionID (or some similar unique tracer) of the ten questions which have been answered by the candidate. Coupled with whether they were answered correctly or not. This could then be printed out or saved as necessary.
Does anyone know how I would go about doing this? I realise that the randomisation feature certainly complicates things a bit. Currently my script hooks on at the end of the quiz when the 'send results as email' button is pressed. The information must be carried through Captivate somehow, I just need a way to call it up on that final page. Could I go about it using some variety of advanced action or some such?
Many thanks.

Hmmmm. That's a pain. I've checked the internal system variables also and found nothing. It's a real pain.
Do you know of any way of exporting non-system internal variables outside the programme? Currently I am exporting internal system variables outside of the programme using a capture hook on the 'send email' button. This then proceeds to export the selected system variables to a back-end database server.
It is a pretty messy way of doing things as you can imagine, but from there I can chop, change and sort the data as I, or more importantly my customer, sees fit. I am having a problem in that using this method the user needs to enter their name and other details twice. Once at the start of the programme [again, customer's requirement] and once at the insert stage. If I can't get the whole project done in captivate then i'll have to keep using this method, but I need to come up with a way that will mean the user only has to enter their data once.
Any ideas?
Cheers.

Tally up a column only on rows that have been checked

Hi I'm driving myself to drink with this, and I'm sure it should be pretty easy.
I have a subtotal column (Column D) which I calculate the total of via (SUM(D2:D20), however I have a column G, that is a "Paid" column, that has a checkbox, now what I want to do is only tally up in column D the amounts that have been ticked/checked in column G.
I thought SUMIF would be my solution but it's not working.
I've tried the following among other things and nothing works.
=SUMIF(D2:D20,TRUE)
=SUMIF(G2:G20,TRUE,D2:D20,)
Any help would be most appreciated.

=SUMIF(G2:G20,TRUE,D2:D20)
works perfectly.
In your message there was an extraneous comma but I don't know if it was available in your sheet or if it was just a typo.
If you are running Numbers in English in a country whose decimal separator is comma, you will have to edit the formula like that:
=SUMIF(G2:G20;TRUE;D2:D20) (semi-colon replacing comma).
Yvan KOENIG (from FRANCE samedi 19 juillet 2008 20:47:27)

Despite setting homepage only as startup I see tabs that have been closed before shutdown (FF8)

Similar Messages

Maybe you are looking for