Despues de instalar el windows 8 Pro en iMac 2013, no encuentra redes inalambricas

Despues de instalar el Windows 8 Pro,en mi iMac con drive fusion,no puedo conectar al wifi.
Funciona el windows,el teclado,el raton,etc,pero no puedo conectar al mi red de wifi.

Gracias amigo por el interes de ayudar pero ya tengo el problema resuelto, como nose pero esta resuelto una ves mas gracias por tu apresiado interes.

Similar Messages

Windows 7 Pro on iMac (mid 2011) and network slows down

We have an office with about 8 mid 2011 21" iMacs running Windows 7 Pro courtesy of Bootcamp. The machines boot quickly and all programs open quickly. They each have from 2 - 4 mapped network drives to a 2012 Windows Server 2008 R2 HP GL380 server on-site and are wired with Gig Ethernet HP business class switches). The users' Documents, Desktop, and a couple other directories are re-directed to the file server using an Active Directory Group Policy Object (GPO).
A couple of the computers will regularly start to slow down after only 20 or 30 minutes of use. The rest have occasionally experienced it but it's always independent of others experiencing the slowdown. The computers with the more regular slowdowns I've also booted into OS 10.7.x and the transfer rates to the same file server are fast and consistent. BTW, all computers are current on Windows updates and Apple updates.
I've tried some of the suggestions I found here: http://www.neowin.net/forum/topic/950538-running-windows-7-via-bootcamp-on-mac-m ini-slows-down-over-time/
1.)
Disable all property's that has something to do with "Offload" under advanced on the nic properties.
Also disable "Recieve Side Scaling".
And set "Speed and Duplex" to auto.
2.)
Turn off windows feature "Remote Differential Compression" (Uninstall) under "programs and features".
3.)
Run fallowing command in cmd:
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global chimney=disabled
i ran disabled on every setting i could.
so it looks like this now:
C:\Users\tab>netsh int tcp show global
Querying active state...
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Acess (DCA) : disabled
Receive Window Auto-Tuning Level : disabled
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
4.)
Uncheck fallowing under your local area connection properties:
Link Layer Mapper I/O Driver.
Link Layer Responder.
With all of that said, do any of you have any suggestions of what to check?

We have an office with about 8 mid 2011 21" iMacs running Windows 7 Pro courtesy of Bootcamp. The machines boot quickly and all programs open quickly. They each have from 2 - 4 mapped network drives to a 2012 Windows Server 2008 R2 HP GL380 server on-site and are wired with Gig Ethernet HP business class switches). The users' Documents, Desktop, and a couple other directories are re-directed to the file server using an Active Directory Group Policy Object (GPO).
A couple of the computers will regularly start to slow down after only 20 or 30 minutes of use. The rest have occasionally experienced it but it's always independent of others experiencing the slowdown. The computers with the more regular slowdowns I've also booted into OS 10.7.x and the transfer rates to the same file server are fast and consistent. BTW, all computers are current on Windows updates and Apple updates.
I've tried some of the suggestions I found here: http://www.neowin.net/forum/topic/950538-running-windows-7-via-bootcamp-on-mac-m ini-slows-down-over-time/
1.)
Disable all property's that has something to do with "Offload" under advanced on the nic properties.
Also disable "Recieve Side Scaling".
And set "Speed and Duplex" to auto.
2.)
Turn off windows feature "Remote Differential Compression" (Uninstall) under "programs and features".
3.)
Run fallowing command in cmd:
netsh int tcp set global autotuninglevel=disabled
netsh int tcp set global chimney=disabled
i ran disabled on every setting i could.
so it looks like this now:
C:\Users\tab>netsh int tcp show global
Querying active state...
TCP Global Parameters
Receive-Side Scaling State : disabled
Chimney Offload State : disabled
NetDMA State : disabled
Direct Cache Acess (DCA) : disabled
Receive Window Auto-Tuning Level : disabled
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
4.)
Uncheck fallowing under your local area connection properties:
Link Layer Mapper I/O Driver.
Link Layer Responder.
With all of that said, do any of you have any suggestions of what to check?

Installing and Unistalling Windows XP Pro on iMac pro

I understadn from research that I can install Windows XP on my iMac Pro ( don't have it yet...) by using boot camp, this seems fairly straight forward. My question is can I uninstall it.
My reasoning is that currently I am running some PLC programming software that is only XP supported, however there are inklings that these will be iMac compatable. I want to run the Xp version under boot camp, then upgrade to Mac OS when they are available.
Is it possible to uninstall XP once installed?

Go to this url and read all about Bootcamp from the best source.
http://www.apple.com/support/bootcamp/
You should especially read this guide before attempting any BootCamp installation or you might screw it up badly.
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf

Cannot eject/read discs in Windows XP Pro on iMac

I just installed Windows XP Professional on my new iMac dual core computer.
The next step was to "Eject the Windows XP CD" so that I could insert the Mac Drivers CD and install that software. When I went to eject the Windows XP Pro disc nothing happened. I tried clicking on "Eject this Disk" and nothing happened. I finally shut down and restarted as a Mac, ejected the Windows XP disc and then restarted in Windows again. I then inserted the Mac Drivers CD, but Windows acted like there was no disc inserted. I couldn't eject. I had to restart again in Mac to eject the disc.
Does anyone know why Windows isn't recognizing a disc when inserted in the disc drive of my new iMac?
Thanks!
Cyndy

Hi Cyndy,
Assuming you have a way to move files between OS X and Windows (e.g. your Windows partition is FAT32, a USB pen drive, etc), there is a way for you to install the drivers without having to install them from a CD.
1. Go to Applications > Utilities
2. ctrl-click "Boot Camp Assistant"
3. Select "Show Package Contents" and a new window will open
4. in the new window, go to Contents > Resources
5. open DiskImage.dmg. A disk image called "MacintoshDrivers" will mount on your desktop.
6. In this disk image, you will find a file called "Install Macintosh Drivers for Windows XP.exe". This is the install program you need to run in Windows in order to install the Apple drivers.

Can i install Windows XP on new iMac 2013 to use quickbooks

I have just bought a new iMac 2013 and need to use my Windows Quickbooks programme for our small business. I understand that I can use Bootcamp to install my Windows XP and then Quickbooks 2010/11.
Is it true that the new iMac Bootcamp no longer supports Windows XP? I realistically only use the Quickbooks every 3 months. What is my best solution to be able to use Quickbooks on my new iMac

No. Boot Camp only supports Windows 7 or Windows 8. If you want to use XP, then you will need to use virtualization software such as:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
     1. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     2. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     3. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     4. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Copying iTunes from windows 7 pro to new 2013 Mac Pro

Have all my work on my iPhone 5s. Do nothing but manually syncing on lates iTunes. What to copy iTunes to new Mac Pro so I can use my iPhone on either computer.
Laptop at work and desktop at home.
All store bought music on C drive in iTunes as it should be along with books etc. but about 8 gbs of my ripped music some mp3 some ACC all at 320 is on my internal drive.
First thought is change iTunes setting to CONSOLIDATE hoping D drive music will go into iTunes properly.
While I searched KB I came up flat. I like a clean organized computer. While I know windows vert well I am new to Mac pros (but not iPhones nor iOS 7)..
Any way I can do this cleanly. I can put a full backup of iTunes onto a USB hard drive I use for 3rd back up off pictures and iTunes
Thank you

Merry Xmas CF McBlob and thank you. I had thought about that but I want a cleaner easier way of doing it as I start to setup my MacBook Pro I have run into a few things and don't like the D drive idea. I did format a 1 TB drive last nite giving 700gb to Time Capsule and 300gb to data. Used Guid format than journaled for TC and fat for data with disk utility.
There has to be a way I can mirror libraries on computers for iPhone 5s. Heck I see icloud took care of contacts, etc. and iTunes saw all my bought music in cloud and downloaded it to macbook. I consolidated my original library so now all us together. There must be way to copy iTunes from windows and use it to replace folders on Maverick latest so my iPhone 5s is seen the same on windows 7 Pugent system and apple MacBook Pro. I called Apple but got a genius on the phone that had to keep asking for help herself and referencing the KBarticle that gives a few options none of which are clean.
Thank you

Como instalar Acrobat 6.0 Pro en Windows Terminal Server

Hola,
necesito instalar Acrobat 6.0 Pro en un sistema Windows 2000 Terminal Server.
Durante la ultima fase, y justamente despues de pulsar Instalar, me reporta un error 2755, si lo realizo desde una ubicacion remota, con unidad de red asignada.
Y si lo hago mediante ruta UNC, me da que no se encuentra (algo) en la unidad P:\. Esta unidad es una unidad de red en la cual no hay nada de Adobe, con derechos de escritura, y en donde ubicamos software vario.
La instalacion siempre se ha intentado realizandola sobre la unidad C:\.
Espero vuestra ayuda.
Gracias.
Fco. Frias.

Hola, Francisco.
Lamento no poder ayudarte con tu pregunta. Sin embargo, quería prevenirte, por si no estás advertido, que no es buena idea publicar tu dirección de correo electrónico en un sitio como éste. Es demasiado fácil que pase a engrosar las bases de datos de los propagadores de spam.
Desgraciadamente, es demasiado tarde para que tú mismo elimines la dirección del mensaje que ya publicaste. Si te interesa eliminarla, podrías solicitarlo por email (en inglés) a userforu"en"adobe"punto"com (sí, no hay "m"), en que tendrías que reemplazar el "en" por @ y el "punto" por un punto (.). De paso, te cuento que mucha gente que necesita poner su dirección en estos foros la "disfraza" así para que los cazadores de casillas no puedan rastrearla en forma automática.

OLA.EU TENTEI INSTALAR O WINDOWS NO MEU MAC BOOK E ELE TRAVOU.ALGUEM PODERIA ME DIZER ALGUMA COISA SOBRE ISSO?

oi eu tentei instalar o windows no meu macbook pro e ele travou. sera q alguem poderia me ajudar?

thank (or don't) google translate for this:
que você instalá-lo através bootcamp? se você simplesmente inserir o disco de instalação do Windows, era óbvio que ele ia falhar. computadores Mac só são capazes de rodar o Windows através de bootcamp. a propósito, por que você iria pagar 1199 dólares por um mac se você quer rodar o Windows?!

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

I have Windows 7 Pro, 64Bit. Itunes works fine except I can't go to the ITunes store from in the software. It starts and then goes blank page. I have tried all the fixes and had a IT group working all day on this. Not fixed. Any suggestions?

Using I Pod NANO. Installed I Tunes on Windows 7 Pro, 64 Bit.
Software works fine. Only problem is that I can't open up the
Store page from in the software. It just shows a blank screen.
Looks like it starts but then just freezes.
IT department worked all day. Reloaded software, set up
security, checked msconfig files. Tried all sorts or revissions.
Nothing works? Yet it works fine on my Windows 7 Home edition?
ANYONE have a clue. This Apple software is not the friendliest!!
This is very frustrating for something so simple to use!
This used to work. Upgraded to 10.3.3.. No good. Tried other revisions,
No Good! Can't purchase music or have the website fully pull up at all
from I Tunes.
Appreciate any help if some has been through this. My service that
I have for IT had to give up. 6 hours of things they tried. Nothing worked.

You would get better response from the iTunes community forum.
Have a nice day!

No wireless access with Windows XP Pro (SP2) on Macbook Pro

Hello,
Just installed Windows XP Pro (SP2) on my new Macbook Pro using Bootcamp Beta. The installation has gone fine with the exception of wireless access to the internet through my Airport home network.
I've tried all the other configuraton wizards on XP...no joy.
The three other macs in the house (2 wireless, 1 ethernet) and one Windows laptop (wireless) are all fine and dandy.
Any suggestions on what to do?
Thanks
17 and 15 Powerbooks, iMac
17 and 15 Powerbooks, iMac

Right Click on My Computer
Select Manage
Click on Device Manager
Make sure that your Ethernet Adapters are working properly
If there is an red X or a yellow ! next to any ethernet adapter then try to reinstall the drivers.
(you can reinstall the drivers via the installation cd or double click on the hardware device under device manager. there should be a reinstall drivers button in there. point it to the CD that you burned from bootcamp)
(there will be a couple of devices that are not working properly.)
MacBook Pro Mac OS X (10.4.8)

Iphone 4 not recognized by windows xp pro

My new iphone4 is not recognized by windows xp pro. Please help.

See http://support.apple.com/kb/TS1538.

1st Gen Shuffle not recognized by Windows XP Pro

I cannot get my 1st gen shuffle to be seen by Windows XP Pro. We have all the updates, the latest version of iTunes. The Shuffle plays, it connects to another computer running Windows XP. I see several messages here that point to different articles. The only thing we haven't done is edit the registry.

Have you tried going through the steps here: http://docs.info.apple.com/article.html?artnum=305136
If that doesn't work, sometimes other USB devices plugged in can cause this. You may want to try removing any other USB devices plugged into the CPU (other than the keyboard and mouse).
Also, what version of iTunes are you running? Check that by going along the top of iTunes and choosing Help>About iTunes.

Usb 3 device "partially" recognized by windows 7 pro

I have an usb 3 device which was perfectly working with my previous Computer (Windows 7 Pro usb 2 facilities).
Now I have a new computer (Windows 7 Pro usb 3 facilities) but my usb 3 device is not recognized thru the usb 3. If I plug it into an usb 2 (still available) it works, but the system tells me that it would be better to use an usb 3 port since it would be
faster... but it doesn't recognized it!
Could it be due because that device was previously formatted thru an usb 2 port?
Could somebody help me? (PS I tried roughly all steps suggested on the previous discussions)
Thanks, any case

Hi,
Have you installed the related driver for USB 3.0? In my view, it should be related to your driver for USB 3.0. You can get this driver from manufacturer website.
Thanks!
Andy Altmann
TechNet Community Support

Print to LaserJet 3150 Shared by Windows XP Pro

I have an older, but servicable LaserJet 3150 hooked to my Windows XP Pro desktop at work.
A long time ago, I set it up to share with OS X by creatign a virtual printer using GhostScript and some other queuing utility - this made is look like a PostScript Laserwriter. Worked great!
Alas, as common with Windows, the system decided to blow iteself away, and had to be rebuilt. I did not keep recipee, and cannot find it online.
Has anybody seen it? The problem is that the LaserJet 3150 is a impure PCL printer using its own format.
Thanks,
-- Harald

http://iharder.sourceforge.net/macosx/winmacprinter/

Despues de instalar el windows 8 Pro en iMac 2013, no encuentra redes inalambricas

Similar Messages

Maybe you are looking for