Dest.storag bin change during putaway foreground

HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes, 
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1  allowed  ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
James
Edited by: Csaba Szommer on Jan 6, 2012 8:10 AM

Hi All
question is
CAN we change destination storage section and storage bin   on  " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working.  my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James

Similar Messages

  • Dest.storag bin change during putaway foreground in LT04

    HI
    For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes, 
    Destination storage type, storage section and storage bin.
    also purposes quant, storage unit .
    Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
    Storage type setting:
    Putaway strategy is : I > addition to existing stock
    Destination bin change during confirmation = 1  allowed  ( i understand , it means we can change distination storage bin during TO confirmation )
    Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
    it purposes remaining elements like Quant, storge unit.
    thanks
    james

    Hi All
    question is
    CAN we change destination storage section and storage bin   on  " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
    I know we can change it on LT04 , main screen . and its working.  my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
    i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
    thanks
    James

  • Storage bin error during MIGO

    hi freinds,
    system is displaying following error when i try to post a goods.
    "storage bin w10 902 we-zone does not exist (check your entry)"
    please advice how to proceed. do i need to check any config settings?
    regards,
    prasad

    HI friend,
    it solved my problem. thank you very much.
    as u said in lx20 i have selected my bin and executed. But what does that transaction do internally. If possible please explain in detail
    I want some notes on WM configuration,
    regards,
    prasad

  • Storage bin Type Change during TO creation

    Hi friends
    Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
    Please confirm
    Rgds
    Madhavan

    Hi,
    Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate  Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
    Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
    Hope this helps.
    Thx
    MJ

  • Destination Bin change in Pick Module Replenishment scenario

    Dear Experts,
    We have a requirement to perform destination bin change during TO confirmation into the pick module for replenishment scenario. The requirements is as below:
    System set up:
    We have a storage type 001 (Replen Storage type) that has been configured with putaway strategy as 'F'. It is basically a pick module wherein we have defined one fixed bin for every SKU or Material in WM2 view and we have defined the minimum, maximum, control quantity & replenishment quantity.
    Our requirement is to perform a two step confirmation for the stocks going into this pick module meaning although the fixed bin in determined during TO creation user needs flexibility to change the destination bin to a new interim bin during confirmation and then they will intern perform a bin to bin transfer from interim bin into the actual fixed bin location.
    We do not want to activate standard 2 step procedure as it will impact other kind of picking process. Hence need a solution to perform destination bin change as below.
    1. For Material A and Fixed Bin 001 in storage type 001, the stock level has gone below minimum quantity.
    2. A transfer order is created automatically to replenish this bin from another storage type(This is standard SAP replen process).
    3. The user will pick stock from the source storage type and deposit the stock into an replenishment interim bin which is also a part of the same pick module.
    4. The user wants to confirm stock in interim by changing destination bin to say bin 002 in storage type 001. Although we have activated destination bin change for this storage type it is not allowing us to change bin during confirmation.
    We are looking for help from experts to provide a solution for this scenario. Is activating destination bin change for fixed allowed by standard SAP? If not what are the other alternatives to achieve this functionality. Please refer the attached document for details.
    Best Regards,
    Harish

    Hi Harish
    How is the replenishment triggered..are you using LP21,LP22 or LP24...IF YOU use any of these standard SAP TCode, first the system creates TR and the bin gets fixed in the TR itself. Even by having destination bin changeable at the time of confirmation will have no effect and will continue to remain grey.
    I had a similar requirement in one of the projects.Placement strategy was next empty bin and since fixed bin was maintained in material master , system was always defaulting fixed bin in TR. When TR was converted to TO, the same bin got carried over
    to avoid this we used user exit EXIT_RLLNACH4_004 to prevent defaulting of bin in TR. TR was created without destination bin. When TR is converted to TO, system can find the bin based on the strategy maintained. This works very well and we have used it successfully
    Regards
    Jayaram

  • Need to enter the storage bin manually

    Hi Team,
    Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
    Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
    Advanced Thanks,
    AN Reddy.

    Hello A.N Reddy,
    There is a confusion here. Are you talking about WM or EWM.
    If it is WM, then, I would suggest you to enable, Manual Storage Bin Input for respective WM Movement Type in WM Movement Configuration. That will request you to enter Storage Bin Manually during TO Creation.
    If it is EWM, For your process type, Make Search Seq field as Blank and  keep your Putaway Rule as " No Putaway Rule ". This will request to you to enter the storage bin Manually during Warehouse Task Creation Process.
    In EWM Outbound Process, you have to empty your search criteria in your Pick Rule.
    Regards,
    Sathish

  • Picking multiple quants from one storage bin

    Hello all,
    I have a client that purchases copper wire in pallets that are stored initially in storage bins.  During goods issues to production the pallets are split up and, when material is put back in the warehouse,  storage bins end up with multiple quants that are partial pallets.  When they issue goods, the system, using FIFO, picks quants from multiple bins even though one bin has sufficient quantity.  That forces the warehouse staff to pick from multiple bins rather than one. 
    Is there a way to make the system pick all of the material from a single bin even if there are multiple quants?
    Thanks,
    Ross

    Strategy A: Partial Quantities First  
    With this picking strategy the FIFO principle is overridden in order to optimize the management of stock in the warehouse
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f844b74afa11d182b90000e829fbfe/frameset.htm

  • Change storage type during putaway

    Hi,
    I know it is possible to change the destination bin during putaway.
    I set it in storage type and it works.
    Is it possible to change also the storage type during putaway by SU (LM02) ?
    Thank you
    Best regards
    Andrea

    Hi, thank you for your reply.
    The TO is just created.
    I want to change the storage type during the confirmation of TO  via RF using transaction LM02.
    Is it possible?
    Thanks

  • Change destination storage during putaway

    Folks,
    I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
    Thx,
    MdZ

    Hi Csaba,
    it was exactly what I read when I have this problem:
    "No destination bin can be entered during confirmation for
    dynamic coordinates
    transfer orders with return subitems
    Lean WM (if the destination bin is defined in the movement type)
    posting change TOs
    inventory based on putaway
    additions to existing stock in storage units
    stock removal from or putaway into bulk storage
    two-step confirmation
    transaction Confirm single item
    the case where you are using a putaway strategy
    all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
    stock removals from a bulk storage managed with storage units"
    As I wrote Continuous inventory upon placement into stock  indicator must be unchecked.
    Andrzej

  • How change Storage bin search logic in WM ?

    Hi All,
    Standard process to find bin during putaway in WM is as follow :
    First find storage type, then storage section and finally storage bin type.
    Is it possible to change slightly this logic as follow :
    Find storage type first, then with first storage bin type find a bin in storage section sequence, if not found try to found with second storage bin type within storage section sequence and so on.
    It's a kind of mix bewtween storage bin type search and storage section search.
    Thanks for advice !
    Patrice

    OK, so you want it to check all storage sections for available bin type "A" and only then loop back around and check for bin type "B" from the first storage section again.
    Storage bin type check is relative to the allowed Storage unit types per bin based on my understanding. During put away the system will check the allowed SUT in sequence based on your entries in your storage bin type search so it would loop within first storage section until it sees no available bin type that fits the allowed bin types (sequential) and only check second storage section (again sequential) when none of the allowed bin types are found available, so if I understand the available config options what you want is not possible without customization....check exit MWMTO003 - Customer-defined putaway strategy to create your own strategy

  • Change Storage Bin Number in 309 movement type

    Hi Gurus,
    I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
    I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
    Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
    Kind Regards
    Ken

    Hi Kris,
    Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
    For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
    Regards
    Ken

  • Putaway Block in Storage Bin for any specific Material Code

    Hi Experts,
    We have a problem, we have allowed mix storage, addition to stock in the storage type, our requirement is this, that we want to block one bin aa-01-01 for some specific material code xxxxx, but we want to allow putaway other material codes to that bin.
    How can we achieve this. Can we use LS07 or some other solution. Please suggest at the earliest.
    Regards
    Ishu

    Hi,
    In standard system, you can block one specific bin for the specific material with Putaway strategy "Fixed bin" by maintaining this bin in material master. It is unclear that you set "allowed mix storage" and again required material specific putaway in bin.
    You can change "Mixed storage" indicator to blank. Which explains "___"  Mixed storage is not allowed
           All storage units in a storage bin must contain the same material and batch (one quant).
    If you don't want to change any of current setting you'll need to use the user exit and maintain custom table where you can maintain specific bin for the material for the warehouse. After determination of the bin to putaway in the standard code you can check if it is conflicting to the entry in your custom table.
    Hope this'll help.
    Regards,
    Sudhir

  • Storage bin available when posting change is not confirmed completely

    Dear Gurus, I have a question for you:
    My costumer wants to do a posting change when the material is released from QM with a decision usage from Q to unrestricted use. The process is done in two steps: with LU04 the TO is generated and with LT12 is confirmed. When the TO is generated the position is half confirmed. With LT21 we can see the row for the ST (lets say ST 504 Open Storage type) and a second row 922 TR-ZONE. The first row appears green (as confirmed) and the second row appears red (Not confirmed).
    My costumer says that " beacause of the strategy given for the storage entry, the storage bin released in the TO (not confirmed completely yet)   is available at this moment.
    If the storage bin is still physically full, the carrier will found not space for leaving the goods even SAP is telling him there is space available at this storage bin."
    I have read that once yo start a TO the storage bin is blocked until the transaction is fully confirmed.
    If this is correct I need to demostrate it and I don not find the way to do it.
    I hope you understand my explanation and give me any clue.
    I appreciate very much some help.
    Al

    agmogena wrote:
    Ok, I will tell you the configuration I have. Lets point in a movement 921 quality to unrestricted use.
    > Type Storage origin: 902  EQ and RC flags are set on. (confirmation control for storage type)
    > Type storage TR: 922 are set on.
    >
    > Movement type 921 the flags for Confirm immed and Propose confirm are NOT set.
    >
    > I do a LU01 to create a intruction to change a material from Q to Unrestricted.
    > with LT05 I create the TO.
    > At this time if I look LT21 the TO created I see the tag source with two positions one for TS 902 green color and the second 922 in red.
    > For the tag of target We can see the first position 922 In red and the second position 902 in green color.
    >
    > Perhaps this detailed explanation will help you to fully understand the scenario.
    >
    > Thank you again,
    >
    > Al.
    From the above it isn't entirly clear that the first part of the T.O. is actualy confirmed, my settings are to autoconfirm this so I have no example to look at in my system. Perhaps the display shows the first line green before any actual confirmation..
    I assume the stock status has not changed when you first view the T.O.? If the t.o. is partly confirmed I would expect to see the stock status changed and a neg in 922 until the second part is confirmed. Perhaps there is no confirmation at all yet, in LT21 what is the confirmation status? If you view the transfer order header there would be a partial confirmation showing with a yellow triangle, do you see this or no confirmation indicated at all?

  • Send Storage Bins to external system (change pointer, change document, ...)

    Hello,
    I need to send to my external system the storage bin modifications, namely, insert and delete information.
    I haven't found any User Exits ou BADIs to the LS01 transaction.
    I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
    Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
    What are the options that I have to do this?
    Thanks in advance,
    Rui

    Hello Rui,
    perhaps you can use DBTABLOG (Think about data volume and performance).
    http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
    Best Regards, Dirk

  • Storage bin does not exist error when during transfer posting in MB1B

    Hello All,
    I am getting the error message "  Storage bin [WH no, Storage type] does not exist Check your entry"  during transfer posting in MB1B from one storage location  to another for ex 0007 to 0001. But i can able to do transfer posting from 0001 to 0007 without any error.
    Please provide your solutions/suggestions
    Thanks
    Benny

    Benny Sampath wrote:
    Here is the error message "Storage bin 56A 870  does not exist (check your entry)"
    >
    > Thanks
    > Benny
    I can only see 2 values instead of the expected 3.
    what is 56A ? is it bin, warehouse or storage type?
    what is 870 ? is it bin, warehouse or storage type?
    one variable that is need  to have a hit in table LAGP is missing, hence you get this error.
    you have to find out why this variable is missing.
    But there is a wide area to look. Hence you should first answer the questions, as this would limit the options where to look.

Maybe you are looking for

  • How to stop attachments saving to hard drive when viewed?

    Hi Possibly a silly question with an obvious answer.... I've very recently updated from iBook with OSX 10.2.x to OSX 10.4.7, which includes a newer version of Mail that seems to handle received attachments differently. In the past, when I opened an a

  • Why is Illustrator CC making a mess of my SVG files?

    Hello, My experience with Illustrator CC's SVG support has been pretty mixed.  However, now I have a file (created by Illustrator) where if I even just open it and save it, it ruins the file. Here's a screenshot before: Then I open the file and save

  • Recovering Deleted iCloud Calendars

    I accidentally deleted my iCloud Home and Work calendars in Outlook on my work PC.  I honestly had not thought that it would delete them from iCloud and not just Outlook.  My mistake.  I tried to restore them by searching for "calendars" in Spotlight

  • Can I use a prezzy card to purchase apps?

    Is it possible to use a 'prezzy card' to purchase apps?

  • How to re assign an i cloud account to a diiferent phone

    Have taken over daughters iphone her icloud account is appearing on both phones.  How can you delete an account from only one phone or change the account to a different account on the phone?