Destination: AppleTV

Does anyone know which output format to choose to make a movie viewable to AppleTV? I've tried the h.264 and AppleTV reports that this format cannot be copied to AppleTV. I'm pretty sure h.264 is the codec of choice for AppleTV, but alas, it must be more complicated (isn't everything nowadays).
Can anyone help me with the settings? I know I want the movie to be DVD quality (720x480) although that might actually be 835x480 I read somewhere for 16:9 format and I'd like it to play on AppleTV. When I export a movie in iMovie 08 to h.264 it plays fine on AppleTV, so it's got to be some funky twist in the export options from FCE.
Also, should I set my output at 835x480 for 16:9 or 720x480?

I have a similar problem. I edit in Final Cut, and would like to watch the result on Apple TV - Apple all the way so shouldn't be a problem!
However I do it I am suffering badly in quality. When I export it has bad horizontal lines on any moving areas of image?
I've also tried saving to Quicktime Movie from Final Cut, then converting to MP4 with both QTPro and also Visual Hub, but both give these distortion lines?

Similar Messages

AirPort Express has weak signal while playing music from Iphone, intermittent play

AirPort Express has weak signal while playing music from Iphone, intermittent play

I'm having the same problem, even more:
- Watching movies over AppleTV: switches off every 20min (sleep mode).
- Listening to iTunes music ofer AirPlay: the same.
- A whole confusion with switching airplay destinations (AppleTV, AirportExpress) over iPhone remote app. Sometimes remote cannot find my library anymore
- Before, I was able to multitask: stream a DVD to AppleTV, using airplay mirroring, and simultaneously stream music from iTunes on the same computer, over the iTunes airplay selector, to loudspeakers connected to AirportExpress. No longer possible.
I've grown a big Apple fan in short time, proudly living what for others is the future (your media stored anyhwere, controlled from anywhere, played anywhere, stop thinking in terms of devices). And, I've learnt to savour the moments when you can look your Microsoft friends deep in the eyes and say: "The big difference with Apple - it just works"...
At the moment, I'm trying not to invite my friends.

Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes. One would assume they are formatted properly to work on Apple equipment, yes? Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three. They were from the $4.99 Sci Fi collection: Enemy Mine, Dune and Terminator 2. Oldies but goodies. The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films. Any advice?

I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable.

HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV.

A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

Movies do not show up on AppleTV but they are in iTunes

I have around 220 movies in iTunes. Most all were purchased through Apple. I am having an issue where several of my movies are not showing up on my Apple TV. The movies that do not show up were all purchased and watched on my Apple TV but once it synced to my iTunes library they no longer show up.. I have reset and restored everything including my entire iTunes library, took almost an entire day, but still have the same issue. My apple TV is a 1st gen. The ones that do not show up are a mix between HD and SD so that is not the issue. The only common thread between these movies is that they were all purchased and watched initially through my apple TV. HELP please!

As far as the resolution, I do not have the exact info but they were all purchased through iTunes via my AppleTV.
Examples:
- Journey to the Center of the Earth HD and SD
- Tranformers HD and SD
- Journey 2: The Mysterious Island SD
- Sherlock Holmes SD
Thats just a few of the movies that do not show up on my AppleTV but are in iTunes and can be played on my Laptop or synced to my iPad, iPod, iPhone and iTouch.
I have tried syncing these movies to my AppleTV and it shows syncing but completes way too quickly and the movies are not on my AppleTV. When I look at my AppleTV via iTunes the movies are checked off so as to sync. No exclamation point or any error for that matter ever occurs.

I bought a movie from iTunes on my Mac and it is not showing up on my AppleTV purchased movies. Is there a way to get this to sync?

I bought a movie from iTunes on my new macbook pro and it is not showing up on my AppleTV, any ideas?

Sign out of the Apple ID on the ATV and sign back in.

Submit + destination

hi All,
I have a Z Function Module(RFC enabled) which passes the Program name its variant and the Destination.
Inside this FM it call the JOB_OPEN Submit and JOB_CLOSE FM to trigger the report of different system.
i mean if i m in sytem ABC and i want to execute a report on Sytsem on System XYZ then this FM works fine. Its is created by me and working fine sice last 3-4 year.
Now i ahve a reqirement to delete this FM if there is any SAP Standard functinality exist in ECC 6.0 which
can trigger the report at different destination.
Que-My question is How to trigger a report at different destination .I need SAP Standard functinality of ECC6.0. please help me.
Thanks in Advance
regards,
Saurabh T

This will give you an idea of how it works. Save the file and double click on it to open in IE.
<html>
<head></head>
<body>
<form name="myForm" method="GET" action="servlet/InsertRecords">
<P>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="1" onClick="onClickFunction(1)" >Insert Record
<BR>
<INPUT TYPE="RADIO" NAME="Radio1" VALUE="2" onClick="onClickFunction(2)" >Delete Record
<BR>
</P>
</form>
</body>
<Script Language="JavaScript">
function onClickFunction(inVar) {
   if (inVar == 1) { document.myForm.action="servlet/InsertRecords";
                     document.myForm.submit(); }
   if (inVar == 2) { document.myForm.action="servlet/DeleteRecords";
                     document.myForm.submit(); }
</script>
</html>

Error while scheduling Crystal Report within CMC with Destination as Email

Hi,
I have added a Crystal Report within the CMC. Before scheduling it, I have specified the Destination as Email and entered the necessary details. After scheduling it, the Report Instance gives a Failure with Error Message as -
destination DLL disabled.CrystalEnterprise.Smtp
How to rectify this?
Thanks,
Amogh

Hi,
go to the CMC and invoke the server list under Servers. Locate the entry for the Crystal Reports Job Server, select it and invoke the context menu using the right mouse button. Select Destination and add Email in the list of the possible delivery options. Configure the connection data for your SMTP server and restart the Crystal Report Job Server.
Regards,
Stratos

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

Remote app no longer sees AppleTV and shares

I've noticed that the Remote App on my iPhone 4 looks different than it used to, so I guess it's been updated recently. Anyways, now I don't have AirPlay anymore in any video or audio apps. I haven't changed anything in terms of network set up, AppleTV configuration, nor my PC and Mac itunes sharing. Everything is the same.
The ONLY thing I can think of, other than the Remote app being updated is that I had my wireless router turned off for two weeks while on vacation. However, on returning, EVERYTHING JUST WORKS. iphone wifi access is fine, Apple TV access is fine (been watching podcasts and netflix no problem), and PCs and laptops connect same as always.
THe ONLY difference is my iphone cannot "see" AppleTV in Remote App and Airplay feature is GONE. My homesharing is still displayed as selectable libraries in the app, but selecting one NEVER CONNECTS. This also used to work perfectly fine.
I'm quite frustrated at losing such a feature.
For what it's worth, the AppleTV doesn't seem to "see" my shared library either (under "Computers")

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

February 2012,I bought an AppleTV in the US, to bring it to where I live, CHILE, where voltage is 220V. Is the device multivoltage or do I need a voltage converter?

February 2012,I bought an AppleTV in the US, to bring it to where I live, CHILE, where voltage is 220V. Is the device multivoltage or do I need a voltage converter?
Thanks!

only a cable that fit your wall socket is required

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!

New password in iTunes and not my appleTV is not working

I changed it two weeks ago. Tried to access my appleTV today and it keeps asking me to enter my password, over, and over, and over again without allowing me to advance. What gives?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Logical system and rfc destination

hello all,
what is the difference between logical system and RFC destination?
thanks for ur help in advance.
regards,
vikas

Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Regards

Destination: AppleTV

Similar Messages

Maybe you are looking for