Destination storage bin problem

Dear SAP GURUS
i am facing a problem the scenario goes like this.
I have created the sales order, and delivery and then done the picking using the delivery order's subsequent document by creating the transfer order and then confirmed the transfer order by lt12 the status is also coming as picking C and the WMSTATUS C now when i am trying to do the postgoods issue it is giving me the problem of
" warehouse XXX 916 not found"?
i have not done the putaway stratergy. can anybody help me with the problem please.
why is that so is it because that i have not done the PUTAWAY stratergy or is it something else.
please help me with this regards.
thanks and regards

Dear Yogesh,
Check these settings in the IMG
IMG->Enterprise structure>Definition->Logistics execution>Define, copy, delete, check warehouse number
IMG->Enterprise structure>Assignment->Logistics execution>Assign warehouse number to plant/storage location.
Make sure that you done the proper settings for ware house management
IMG>Logistics execution>Ware house management
I hope this will help you,
Regards,
Murali.

Similar Messages

Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

Yard Management ( capacity of destination storage bin )

Hi Experts,
In sap yard management how to find capacity of destination storage bin , is there any field to check?
Regards
Anji

Hi,
Yard management (LE-YM) does not enter in the warehouse.
Therefore there is no destination storage bin relation.
On the other hand, there are capacity checks for trucks at location like door, staging area, parking spaces...
Best regards
Alain
Reward points if helpful

Determine destination storage bin from PP-form

Hello,
From an adobe form (based on PSFC_KANBAN) I try in the print program to determine WM-data. To be specific I need the way from the supply area (or other pp-data) to the destination storage bin (Table PKHD).
It would be very kind of You, if you could give me a hint.
Kind regards,
Benjamin

Benjamin,
I am not sure but may be you can see the program RLLS4100 or TCODE LS41.
With this report, you can create cycle lists which are assigned to a storage type.
You receive a list with the following information:
Production supply area
Material
Plant
Warehouse number
Warehouse type
Production storage bin
Dynamic destination storage bin
Staging indicator for production supply
Try also TCODE OP42 and PK05.
The discussion below might help you:
http://scn.sap.com/thread/3172596
Regards,
Ashvin

Same Storage Unit number for both source & destination storage bin

Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciated

Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin:

Proposal of same destination storage bin as source storage bin

I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Destination storage bin determination issue

Hi Experts,
When we deconsolidate the ASN, some of the products getting into correct destination bin and some products are not getting into correct destination bin, getting into one inbound over flow storage type defined. When i looked at product master, strategies and storage types configuration the difference i see between actual storage types and overflow storage type is:
1. HU requirement option. i.e. for actual storage types - HU requirement not allowed and for Overflow storage type - HU requirement allowed but not requirement.
2. For actual storage type ---- Mixed storage selected as "several HUs with different Batches of the same product" for putaway rule: Addition to existing stock/empty bin and for Overflow storage type - Mixed storage without limitations
Can you please help me if anything is wrong with above selection at storage type level?
Thank you...
Sridahr
Message was edited by: SRIDHAR B

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Change destination storage during putaway

Folks,
I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
Thx,
MdZ

Hi Csaba,
it was exactly what I read when I have this problem:
"No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units"
As I wrote Continuous inventory upon placement into stock indicator must be unchecked.
Andrzej

Print of Storage Bin details in GR slip

We have done goods receipt (GR) in a Storage location with is Warehouse managed.
We have setting where the Transfer order is created and confirmed automatically as soon as GR is posted.
We print the GR slip and we need the Storage bin to be printed for every line item. We need the destination Storage bin detail from the Transfer order created.
Now is it possible to have this scenario?
Which program is called first? Printing of GR or Creation of Transfer order?
Please help me with the logic to get the Storage bin information in the Goods receipt slip.

done

Addition to stock in storage bin

Hi,
in the customizing LE-WM-Master data-Define Storage Type I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
How can I achieve this?
Regards

Hi Jürgen
When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated

L_TO_CREATE_MULTIPLE, --- Fix Bin Problem

Hi,
I've used fix bin strategy in warehouse management, and I set a fix bin B01 for the material 100-100,
If I create a transfer order for this material via Tcode LT01 and assign a destination storage bin B02 to it, a <b>WARNING</b> message appeared, but I still can post the transfer order;
But if I create a transfer order by function module L_TO_CREATE_MULTIPLE to do the same things above, the system gived me an<b> ERROR</b> message,
So, what's the reason? Did I missed some parameters? because it should be a warning message.
Please kindly help.
Thanks and best regards.

hey I got one requirement to use the L_TO_CREATE_MULTIPLE function module for "create transfer order Delete Vechicle WM" and I think I should use Movement type for this to delete vechicle, so please help me, if you know the answer.

Problem in Source storage bin for returs

Hi,
i did PGR for a returns delivery and when i tried to create TO
for the same system is taking the source bin as 000000000 and not the delivery number. i checked the movement type 651 where my entries are correct ie,.. in source storage type i have given 904 and checked the field " source" .
can any body tell me why the system is taking 00000000 as source storage bin rather than the del no............
waiting for ur quick reply.....
thanks

Hi Csaba / rajasekar
i have those requirement tupes maintained correctly.
and further i have gone through OSS notes, it is very helpful.
here i would like bring one more thing to ur notice that this problem i am facing intermittently and not each and everytime.
System is picking up delivery no sometimes and some times it is not.
Further i'll take this oppurtunity to ask u one more question ie...
in OMLR transaction assignment of WM-IM mov types, i have not maintained 601 mov type entry ie,... the entry IMmov type 601 and WM mov type 601 with all the fields in between....but i wonder how the system is allowing me to create TO for the delivery and reverse the same...and even i can find WM mov type 601 in delivery at the time of creating this TO......pls try to anser me how the system is automatically picking this WM mov type and allowing me to create TO........
waiting for ur response

Problem with storage Bin

Dear All,
My request is like
in material master i have assigned Storage bin ( WH2 view ) but at the time of creating Transfer Order if user put different storage bin then system accept that at post the material to other storage bin .... ( not puting material in storage bin mentioned in material master)
i want to block the TO if user mention any different storage bin at the time of creating TO
PL. HELP
With best regards
Suman

Hi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman

Change Storage Bin Number in 309 movement type

Hi Gurus,
I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
Kind Regards
Ken

Hi Kris,
Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
Regards
Ken

Move stock between storage bin

Hello,
We have some materials created in the past and are created in dummy storage bin.
Now we need to move this materials to the correct storage bin. How can I do move X units from a storage bin to other storage bin. Create a TR between storages bin??
Other question, how can I create manually with GR, a material in a storage bin, I mean how can associate a material to a storage bin.
Thanks

As per your statement I understand you are facing problem while TO creation through LT10. It seems you are getting destination bins which are blocked.
Storage bins get blocked if there is an open inventory document.If you are looking for a specific bin which is blocked then clear the relevant inventory document. Also it is possible that due to some reason supervisor blocks specific bin ,you can see it in LS06 & unblock it.
Hope this help you.
Regards,
Prashant

Destination storage bin problem

Similar Messages

Maybe you are looking for