'Destinations' is missing when rescheduling WEBI instance (BOBJ 4.00)

BOBJ allows to specify u2018Destinationsu2019 ( u2018Default Enterprise Locationu2019, u2018BI Inboxu2019, u2018Emailu2019, etc. ) when reoccurring instance is created.
However when I try to modify existing reoccurring instance u2018Destinationsu2019 cannot be changed. u2018Destinationsu2019 is not even displayed on sidebar when modifying existing reoccurring instance.
Is this feature or issue or security setting that needs to be modified?
There is no issue with changing destination for existing reoccurring instance of Crystal report.
We are using version BOE version 4.0 SP2 P5

Hello,
seems ADAPT01575250 - Schedule Destination Options missing for re-scheduling of succesfull or recurring Web documents, fixed in Patch 2.9
Thanks and regards,
Simone Caneparo

Similar Messages

Prompts parameters disappear when reschedule a instance from history

Dear All,
In BI 4.1 launch pad, when I reshceudle a report using an instance from the history, the prompt values given for that instances disappear for all prompts and need to enter all the parameters again. This happens only when I click the prompt icon on the schedule window, otherwise the parameters are retained and the report can be scheduled with the previous given parameters.
As a result, I have to run either with previuos selected parameters or need to input all prompts again, no way to change only certain prompts and keep the previous parameters for the rest.
In XI 3.1, the prompt parameters will be retained of that instance during reschedule and we can change certain prompts parameters as per our requirement and rest we can leave with the previuos parameters.
Is this the funcitonality or bug or any settings available to retain the prompt inputs.
Regards,
Ravi

"This happens only when I click the prompt icon on the schedule window, otherwise the parameters are retained and the report can be scheduled with the previous given parameters"
I test a WebI report with prompt on a BI4.1 SP05, and the Prompt's values are retained when reschedule and modify the Prompt. Can you check your BI4.x production version and let us know if this problem is replicated on your BI4.1 SP05 or above? Regards, Jin-Chong

Missing data when exporting webi to excel (not 65536 limit problem)

Hi guys
I just meet a problem about webi that it will miss data when exporting webi to excel.
It's not about 65536 limitation, as my webi report do some aggregration and limitation and never beyond that limitation.
Also there are 2 tabs in my reports, if I split the 2 tabs into 2 separate reports and export them separately, then problem disappeared.
Any ideas on this?

Hello Claes
according to:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Tools => Import and Export => Specifying the Sequence of the External Data Structure => External File Structure: Specification
Table EST07 should be part of export file. I am not sure if the packing requirement ist part of EST07.
Furthermore wirh ECC 6.0 EnhPAck3 some changes happend generally in the area of DG classification.
E.g. Dynamic dangerous goods classification. I am not sure if these changes are "included" in some sense in the EH&S data download.
With best regards
C.B.
PS: please check this link on the top:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Refer to "Table Assignment: Specifications"
I believe packaging requirement is part of table EST0B but this is part of the download file.
Edited by: Christoph Bergemann on Aug 27, 2011 7:12 PM
Edited by: Christoph Bergemann on Aug 27, 2011 7:13 PM

Adobepdf.dll missing when 99% of Adobe Creative Suite 5.5 Web Premium is installed?

99% Installed on Adobe Creative Suite 5.5 Web Premium then received an error window: The file AdobePDF.dll on Adobe Acrobat CD-ROM is needed. Type the path where the file is located, and then click O.K. Browse to the file and copy files from it. Please advise as to how to finish this install. I am able to open each one of the applications that were installed from the Program Files, but the install is still sitting at 99% and the Files Needed window is still up. Please advise. Thank you!

I did see this information, but I do not have 64 bit, nor am I trying to
install CS3. So, will this work for 32 bit and CS5.5?
Thank you!
Deb Jones
District Technology Trainer
Learning Through Technology & Media
Charlotte County Schools
[email protected]
941.255.0808 ext. 3144
[email protected] writes:
>Re: Adobepdf.dll missing when 99% of Adobe Creative Suite 5.5 Web Premium
>is installed?
created by http://forums.adobe.com/people/Manish_1988 Manish_1988 in
>Creative Suites Windows - [
>http://forums.adobe.com/message/4253209#4253209 ]View the full discussion

When client open folder with html files to preview web site, some pictures are missing when previewed.

However all images are in "images"folder. Same images are missing when previewed in Firefox and Explorer.
Any idea why?
Thanks.

Are you sending this other person all of the image files in
the same relative location as they are on your local computer?
For instance, if you are sending them index.html and your
images are in a folder called images, you should be sending them a
Zip file with the following enclosed:
index.html
images (folder)
image1.gif
image2.jpeg
If you are sending this type of structure to your other
party, check the links in code view. Make sure they are relative.
If they are, on the index.html page they would look like
images/image1.gif. If it says anything like C:/ or something that
points to a local drive they you will need to make sure the image
are within the site definition and then save the files
again.

Borders missing when displated as HTML on Web

Hi All,
I have created a matrix report and trying to publish it to the
web in HTML format. The borders are missing when published on
the Web. I tried to draw a line, but it does not help. I have
seen in these forums that it is a restriction. But can anyone
tell me any workaround and how you guys have implemented it.
Thanks
Chithan

hello,
first thing, i would use HTMLCSS as this format produces a more
accurate output.
there are restrictions with HTML(CSS) as it does not support the
creation of graphic-objects (lines, boxes, etc.) those will not
be visable in HTML(CSS); tableborders are basically graphical
objects around the datacells, therefore not available in HTML
(CSS).
regards,
the oracle reports team --pw

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

"Error while parsing SOAP XML payload: no element found" received when invoking Web Service

Running PB 12.1 Build 7000. Using Easysoap. Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service". This error does not appear to be coming from the application code. Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;"). Not sure where these are coming from. When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter". Not sure where or what temp_xml_letter resides???   The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited. Need to get this resolved...please.
This is the result of the search. Notice the extraneous characters ("""):
dar1main.pbl(d_as400_mq_xml)
darlettr.pbl(d_email_xml)
---------- Search: Searching Target darwin for 'temp_xml'    (9:52:41 AM)
---------- 2 Matches Found On "temp_xml":
dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
darlettr.pbl(d_email_xml).d_email_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
---------- Done 2 Matches Found On "temp_xml":
---------- Finished Searching Target darwin for 'temp_xml'    (9:52:41 AM)

Maybe "extraneous" is an incorrect term. Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the """? How do I find which parser is being utilized and how to control it?
<<<
If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
>>>

How to undo update of checkbox after triggering when-new-record-instance

Hi,
I am using eBusiness Forms Personalization in 11.5.10 to alter the Receipts form in Purchasing. I want to prevent users checking the rcv_transaction checkbox if the destination is "Multiple" and, instead, click the "+" sign to explode the multiple record into it's many component records.
I can do this by invoking the when-new-record-instance trigger to make the "multiple" record fields unalterable and issue a warning message when the user selects such records. However, my problem is that - if the user clicks the checkbox as the first field in a "multiple" record, then this updates the checkbox to "Yes" BEFORE the trigger fires, which then locks the record for update.
What I need is a solution that either sets the checkbox to unalterable for "multiple" records BEFORE the user clicks into such records, OR a method of undoing the update of the checkbox after the record has been selected (I cannot do this by simply setting it to "No" by the trigger as this is still technically an update and locks the record).
Cheers
Graham

Hi Navnit,
Yes you are right, but it can work even we not plase quotation mark in it. But Yes I forget to place semi colon so now it is
IF :System.Cursor_Record = 1 THEN
   :Block.Col1 := '02:00';
ElsIF :System.Cursor_Record = 2 THEN
   :Block.Col1 := '07:00';
   ------and so on
END IF;Danish

FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception

I have a form that I migrated to 10g from 6i. I have no problems with it in 6i.
When I launch this migrated form on the web in 10g, I get the following error:
Error: FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger raised unhandled exception ORA-03127From oracle error code
03127, 00000, "no new operations allowed until the active operation ends"
// *Cause: An attempt was made to execute a new operation before the active
//         non-blocking operation completed or a new operation was attempted
//         before all the pieces of a column were inserted or fetched.
// *Action: Execute the new operation after the non-blocking operation
//          completes. If piecewise binds/defines were done, execute the new
//          operation after all the pieces have been inserted or fetched.What does the above suggested action mean?
Any suggestions.
Thanks

Run the debugger and see what line of code is failing.

FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled except ORA-06508

Dear Colleague,
I am migrating a Forms application from Forms 9i to Forms 10g. Most of my forms were originally created using the Oracle Designer Forms generator. I am also using the Webutil plugin. I just finished configuring Webutil, tested it and it seems to be working fine.
I am able to compile all code and generate a Form executable. However at runtime, I get an error as soon as the first line of code in the WHEN-NEW-FORM-INSTANCE trigger.
The error is:
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-06508
and the beginning of the code is as follows. Using the debugger, I found out that the line:
CGBS2$.SET_COORD_STYLE( 'P' );
initiates an error.
/* CGLY$INIT_CANVASES */
/* Call procedure to ensure correct canvases are visible */
BEGIN
CGBS2$.SET_COORD_STYLE( 'P' );
CGBS2$.SET_QRY_ON_ENTRY( 'Y' );
CGBS2$.SET_NAV_FROM_BLOCK( 'PROJ_BLOCK' );
CGLY$CANVAS_MANAGEMENT;
END;
Is the error telling me that this procedure was not found? How can I proceed to find the cause and solution of my problem? Are one of the Oracle Designer Forms Generator libraries missing?
I would appreciate a tip to help me begin seeing the light at the end of the tunnel.
Thanks and regards,
Randy

Randy,
Glad I could help and you've got your Form running.
@user9230833
It is consider "bad form" to usurp another's post. Please create your own Forum post and include a link or links to any relevant posts. As to Randy's situation, he simply compiled the Forms 9i Library module (.pll) with Forms 10g's compiler. This may not be the cause of your error. When you post your own question, please include your Forms version (full version [eg; 10.1.2.0.2] not the release [6i, 9i, 10g, etc]). Also include any sample code that might help us help you! ;-)
Craig....

HTTP destination PI_INTEGRATIONSERVER missing (system , transaction SM59)

Hi Experts,
I am working on ABAP Proxy -> File scenario. When I trigger message in ECC, it is giving error.
When I go to SXI_Monitor in ECC, the message is shown as red with error message "HTTP destination PI_INTEGRATIONSERVER missing (system , transaction SM59)". But the RFC destination PI_INTEGRATIONSERVER exists and when i tested this connection I got 500 empty request received message.
I have configured in SXMB_ADM the ECC system as application system and mentioned 'dest://PI_INTEGRATIONSERVER' as corresponding integration server.
Could you please help me in resolving this issue?
Thanks and regards,
Prasad

Hi Prasad,
Ensure below items in your ECC system.
1. goto SM59
2. ensure your RFC - PI_INTEGRATIONSERVER has this entry '/sap/xi/engine?type=entry' (without quots)
3. Target Host has value your PI/XI hostname and correct port number (HTTP)
4, for Logon& Security Tab, ensure to use userID PIAPPLUSER and correct password (saved)
or Service user of Integration engine (maintained in Exchange profile)
You can write back to me if any further help required.
Regards
Sekhar
Edited by: sekhar on Dec 24, 2009 6:57 PM

J2EE:160043]Missing deployment descriptor "WEB-INF/web.xml"

Hi ,
When I try to deploy using admin console i get the following error msg.
J2EE:160043]Missing deployment descriptor "WEB-INF/web.xml"
The war file has web.xml.
Can some give me the reason for the above error.
LOG content:
weblogic.management.ApplicationException: [J2EE:160043]Missing deployment descriptor
"WEB-INF/web.xml" at "C:\bea8\user_projects\domains\eConnect\applications\myEconnect.war"
     at weblogic.j2ee.J2EEApplicationContainerFactory.handleError(J2EEApplicationContainerFactory.java:729)
     at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:470)
     at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
     at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
     at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
     at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.runtime.DeployerRuntimeMBean_Stub.activate(DeployerRuntimeMBean_Stub.java:1064)
     at weblogic.management.console.actions.mbean.WebAppComponentDeployAction.prePerform(WebAppComponentDeployAction.java:141)
     at weblogic.management.console.actions.mbean.DoMBeanWizardAction.perform(DoMBeanWizardAction.java:215)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

You'll have to at least show me the out contents of that WAR file.
-- Rob
Sowjanya wrote:
Suppose the directory structure of the appl is c:\myroot\webapp\...
then we need to go to webapp and then build the war file.
C:\myroot\webapp>jar -cvf abc.war *
then copy the war file and paste it in applicaitons folder.
"sowjanya" <[email protected]> wrote:
Hi ,
When I try to deploy using admin console i get the following error msg.
J2EE:160043]Missing deployment descriptor "WEB-INF/web.xml"
The war file has web.xml.
Can some give me the reason for the above error.
LOG content:
weblogic.management.ApplicationException: [J2EE:160043]Missing deployment
descriptor
"WEB-INF/web.xml" at "C:\bea8\user_projects\domains\eConnect\applications\myEconnect.war"
     at weblogic.j2ee.J2EEApplicationContainerFactory.handleError(J2EEApplicationContainerFactory.java:729)
     at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:470)
     at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
     at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
     at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
     at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
     at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
     at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:946)
     at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
     at weblogic.management.runtime.DeployerRuntimeMBean_Stub.activate(DeployerRuntimeMBean_Stub.java:1064)
     at weblogic.management.console.actions.mbean.WebAppComponentDeployAction.prePerform(WebAppComponentDeployAction.java:141)
     at weblogic.management.console.actions.mbean.DoMBeanWizardAction.perform(DoMBeanWizardAction.java:215)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

Always assets links are missing when changing the location.

Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!

Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal

Can I set up firefox to notify me when a Web page is updated?

I want to be notified when a web page is updated, so I do not miss registering for a class. I was told that Google Chrome has the feature. Can Firefox do this?

I'm not aware of a built-in way to have Firefox check pages for changes, but over the years there have been may add-ons for this. Currently I found:
* [https://addons.mozilla.org/en-us/firefox/addon/update-scanner/ Update Scanner]
* [https://addons.mozilla.org/en-us/firefox/addon/check4change/ Check4Change]
* [https://addons.mozilla.org/en-us/firefox/addon/alertbox/ AlertBox]
I haven't tried any of these myself.

'Destinations' is missing when rescheduling WEBI instance (BOBJ 4.00)

Similar Messages

Maybe you are looking for