Destroyed service partion leads to IRQL error leads to what next?

After failing to get the latest Windows updates to install on my H530 desktop a couple weeks ago, and trying variously more drastic types of restores, I eventually ended up with a computer that booted up to the message "Lenovo Service Partition has been destroyed" and "Can't find script file x:\onekey\main... etc."
Since my PC is under warranty, Lenovo sent me a set of recovery disks. I couldn't get them to work. (I'm experienced enough to change BIOS settings, though not an expert in what all of the settings mean.) Lenovo decided my hard drive was bad and sent a technician who changed it and started the resore disks. (They wouldn't install at first. He pulled the SATA cable from my optical drive, blew on it, put it back, and it worked. I'd had no trouble with my DVD drive before that, and had even made backups the day before everything crashed.)
The six disks loaded without any error messages. But as windows was being installed, I got a blue screen message "Your PC ran into a problem and needs to restart." Below that was the information that the error was "Driver IRQL not less or equal to..." (I don't have the whole thing, because it was only displayed briefly.)  After that, it went to a screen that said, "Windows could not complete the installation." It suggested I run the installation again. I did. Same result. I called Lenovo. They said they'd send me another set of disks. Since I already had two sets (they sent a second one after setting up the hard-drive replacement), I told him I'd try the other disks and call back. Same result.
I had another discussion with a very polite person who decided, after consulting with technicians, that I needed a new motherboard. So, that's where things sit, right now. I'm waiting for the service call. I had a few stray thoughts about things to do or try in the meantime, but I figured it would be smart to seek advice from people who are better trained and less dangerous around a PC than I am. I thought about running a ram test (USB based). I thought about getting an external DVD drive to see if I could restore successfully from that. I thought about whether my BIOS might be out of date. I thought about going fishing. Thought, suggestions, harsh criticism for my failure to create a backup disk on day one? 

Dlubar,
This really sounds unfortunate and I would like to help.
Would you send me a private message with your contact information, the system model & serial number and any service case numbers you might have?  (I don't need all the cases, any one will help).
Thanks for your patience!
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Cant load I-Tunes.  I-Tunes error 7, Windows error 126.  What next?

    I tried to install the most recent I-Tunes update and recieved an error message...error seven Windows error 126.  I was advised to download the I-Tunes again.  Unfortunately another error message pops up and now unable to download I=Tunes at all.  I HAD over 50gig of music on it most of it from my collection of CDs and others from Amazon.com downloads.  Hosed for the thrid time.  Really getting tired of spending hours reloading all of those CD's AGAIN.  Any suggestions?  Can you transfer files off of an I=Pod back onto I-Tunes?  That is if i can ever download the program.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Latest WSDL breaks Web Services Sample Lead weblead

    I am trying to use the Web Services Sample Lead code I downloaded from Web Services Library Sample Code to be able to create a simple web form that will create a lead via webservices.
    Following the README, I downloaded the latest wsdls and updated the references for the Lead_Service and Campaign_Service.
    The problem I run into is when I update InsertPostedLead.aspx.cs
    I am able to modify the username, password and defaultLeadOwner variables to correspond to the user that you will connect to Siebel CRM OnDemand with out any problems. When I then Build the project I receive several errors such as:
    The type or namespace name 'LeadWS_LeadInsert_Input' could not be found (are you missing a using directive or an assembly reference?)
    I get the same error reference Lead1, CampaignWS and Campaign1.
    When I compare the original WSDL with the latest that gets inported I can see that the latest does not reference LeadWS, Lead1, CampaignWS, Campaign1, etc.
    This is where I get stuck. Simply modifying the references to say Lead instead of Lead1 etc ends up creating other errors so I am assuming this is not the solution.
    Does anyone have this working with the latest WSDL? What do I need to modify to make it work with the latest WSDL?
    I am somewhat new to Oracle CRM On Demand and to webservices so I appreciate any help you can provide pointing me in the right direction!

    This is crazy! Someone must have come across this problem
    before.
    I've simplified my question and used a much simplier method
    from the web service, here goes!
    ::: Here's my code :::
    <cfscript>
    webservice = CreateObject("webservice","dummy?wsdl");
    webservice.doBuildQuoteForItinerary("123456,"en_US","","1113");
    </cfscript>
    ::: Here's the error :::
    Could not perform web service invocation
    "doBuildQuoteForItinerary".
    Here is the fault returned when invoking the web service
    operation:<br> <pre>AxisFault faultCode: {
    http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode: faultString:
    com.raileurope.web.ngserver.InternalErrorException:
    java.lang.NullPointerException faultActor: faultNode: faultDetail:
    http://xml.apache.org/axis/}hostname:dummy
    </pre>
    There must be something wrong with how I'm passing in the
    parameters. Is it the null string??!?!?
    Any help would be great!

  • Lenovo H520s "Lenovo Service Partion has been destroyed".

    Hello all,
    Yesterday, an error started to appear on my H520s saying that the lenovo service partion has been destoryed. The only option I have to clik is OK, and each time I press it, it simply says Can not find script file "X:\onekey\main\Irscall.vbs". Then I clik the OK again, and it seems to restart the computer.
    I have tried entering the BIOS many times, and figured out it was "F1". The problem is, I cannot access my operating system, and what's worseis that it is Windows 8, and it came pre-installed on the computer.
    The problem with Windows 8 is I can't access boot manager to use a recovery disk, or enter safe mode without actually having to enter the operating system.
    I have looked around the forums and many other websites, but it seems all those with this same problem, have Windows 7.
    No recovery disks came with the computer, but I do have 2 recovery disks and a recovery USB, that I made a while after I got the computer, which I got about 1 week ago, and is still brand new.
    I also have an external hard disk which contains my backup, that goes by the name "Seagate Backup".
    Do you guys have any solutions, if so try and make sure it's for Windows 8 not Windows 7.
    Thanks,
    Lavendar

    Similar problem with me here with similar machine and I seev you have been waiting for an answer for 4 months!!
    http://forums.lenovo.com/t5/Lenovo-3000-and-Valueline/Lenovo-service-partition-destroyed/td-p/114610...

  • Service 'iPod Service' failed to start and Error 1503

    Thanks to all the people who have provided answers posts... they have helped me get to this point!...
    I have a slight variation on this issue - an Error 1503...
    My original symptom was that I couldn't get iTunes to recognise my iPod so I tried to install 7.2.0.35... and right at the end I got the message about "iPod service failed to start check your permissions"...
    I use AVG Free 7.5.472, Sygate Personal Firewall 5.6 and Spybot Search and Destroy 1.4, but for the install I have used msconfig to shut down everything other than iTunes and QuickTime...
    When I run services.msc I get 2 versions of iPod Service listed - one as "iPod Service" and the other as"iPodService" (i.e. no space between iPod and Service)... the "iPodService" is started but the "iPod Service" is not and when I try to start it I get a message "Could not start the iPod Service service on Local Computer. Error 1503: The service did not respond to the start or control request in a timely fashion"
    Would appreciate any assistance!...
    Many thanks in advance...

    I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
    First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
    2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
    3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
    I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

  • Weblogic app server wsdl web service call with SSL Validation error = 16

    Weblogic app server wsdl web service call with SSL Validation error = 16
    I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
    Cannot complete the certificate chain: No trusted cert found
    Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
    Validation error = 16
    From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
    Here is how I load trustStore and keyStore in my java program:
         System.setProperty("javax.net.ssl.trustStore",”cacerts”);
         System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
         System.setProperty("javax.net.ssl.trustStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStoreType","JKS");
    System.setProperty("javax.net.ssl.keyStore", keyStoreName);
         System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
    Here is how I create cacerts using verisign hierarchy certs (in this order)
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
    1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
    Because my program is a weblogic app server, when I start the program, I have java command line options set as:
    -Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
    -Dweblogic.security.SSL.ignoreHostnameVerification=true
    -Dweblogic.security.SSL.enforceConstraints=strong
    That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
    In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
    I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
    1.     Do I create “cacerts” the correct order with right keeltool options?
    2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
    3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
    4.     Do I need to put the “cacerts” to some specific weblogic directory?
    ---------------------------------wsdl file
    <wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
         <wsp:Policy wsu:Id="TokenServices_policy">
              <wsp:ExactlyOne>
                   <wsp:All>
                        <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                             <wsp:Policy>
                                  <sp:TransportToken>
                                       <wsp:Policy>
                                            <sp:HttpsToken RequireClientCertificate="true"/>
                                       </wsp:Policy>
                                  </sp:TransportToken>
                                  <sp:AlgorithmSuite>
                                       <wsp:Policy>
                                            <sp:Basic256/>
                                       </wsp:Policy>
                                  </sp:AlgorithmSuite>
                                  <sp:Layout>
                                       <wsp:Policy>
                                            <sp:Strict/>
                                       </wsp:Policy>
                                  </sp:Layout>
                             </wsp:Policy>
                        </sp:TransportBinding>
                        <wsaw:UsingAddressing/>
                   </wsp:All>
              </wsp:ExactlyOne>
         </wsp:Policy>
         <wsdl:types>
              <xsd:schema targetNamespace="http://tempuri.org/Imports">
                   <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
                   <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
              </xsd:schema>
         </wsdl:types>
         <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
         </wsdl:message>
         <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
              <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
         </wsdl:message>
         <wsdl:portType name="ITokenServices">
              <wsdl:operation name="GetUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
                   <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
              </wsdl:operation>
         </wsdl:portType>
         <wsdl:binding name="TokenServices" type="tns:ITokenServices">
              <wsp:PolicyReference URI="#TokenServices_policy"/>
              <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
              <wsdl:operation name="GetUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
              <wsdl:operation name="GetSSOUserToken">
                   <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
                   <wsdl:input>
                        <soap12:body use="literal"/>
                   </wsdl:input>
                   <wsdl:output>
                        <soap12:body use="literal"/>
                   </wsdl:output>
              </wsdl:operation>
         </wsdl:binding>
         <wsdl:service name="TokenServices">
              <wsdl:port name="TokenServices" binding="tns:TokenServices">
                   <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
                   <wsa10:EndpointReference>
                        <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
                   </wsa10:EndpointReference>
              </wsdl:port>
         </wsdl:service>
    </wsdl:definitions>
    ----------------------------------application log
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
    Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
    adding as trusted cert:
    Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
    Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
    adding as trusted cert:
    Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
    Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
    Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
    Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
    <Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
    Not Valid Before:Tue Dec 18 19:00:00 EST 2012
    Not Valid After:Wed Jan 07 18:59:59 EST 2015
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
    Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
    Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
    Not Valid Before:Sun Feb 07 19:00:00 EST 2010
    Not Valid After:Fri Feb 07 18:59:59 EST 2020
    Signature Algorithm:SHA1withRSA
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
    <Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
    java.lang.Exception: New alert stack
         at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
         at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
         at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
         at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
         at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
         at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
         at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
         at com.certicom.tls.record.WriteHandler.write(Unknown Source)
         at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
         at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
         at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
         at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
         at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
         at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
         at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
         at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
         at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
         at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
         at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
         at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
         at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
         at javax.xml.ws.Service.<init>(Service.java:56)
         at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
         at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
         at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
         at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
         at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
    <Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

    I received a workaround by an internal message.
    The how to guide is :
    -Download the wsdl file (with bindings, not the one from ESR)
    -Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
    -Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
    -Create a new logicial destination that point to the wsdl file modified
    -Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
    Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

  • I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

    See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
    tt2

  • Windows update causing BSOD in my new B50-30 with DRIVER-IRQL error

    Hi folks - I'm really hoping someone else has found a way to deal with a similar issue.
    I bought a b50-30 about three weeks ago, and everything has been fine until the latest rounds of Windows updates. During the normal update blue screen, It got stuck (I gave it 24 hours just in case!) on "update 5 of 31", so I eventually had to force restart. That led to a blue screen with the annoying smiley emoticon for a frown, and it claimed to be "collecting some error I fo and then we'll restart for you" but it showed a 0% progress reading, which didn't change during the 12 hours I (patiently) let it run. The specific error message was DRIVER-IRQL-NOT-LESS-OR-EQUAL. Eventually I force-restarted a second time and went into Safe Mode, and the updates appeared to restart and make progress. Eventually the computer started normally again. Victory?
    All was fine for a week, and then the bloody thing got stuck on the next round of infernal Windows updates, this time not getting past "28 of 61 updates". When I force restart, I get the BSOD with the same DRIVER-IRQL error message and the same 0% progress reading that won't make progress no matter how long I leave it. Unfortunately, this time, opening in safe mode won't work for me, as it merely brings me back to the identical BSOD screen. Now I have no way to restart the bloody thing at all (other than going for a full recovery, which I'm hoping to be able to avoid). I also tried the "refresh" function, which went through the percentage progress fully, but resulted in the same BSOD. Interestingly, it won't allow me to "restore".
    Does anyone have any brilliant advice, other than throwing it out a window and never buying either Lenovo or Windows again?
    Thanks all
    EJS

    hi Arie,
    Welcome to the Forums.
    If you;re able to see the SSD in the BIOS and/or see it under Disk Management while using the stock HDD then you may want to consider the following:
    1. Boot from the stock HDD and update the BIOS
    BIOS Update Utility - Ideapad 305-15IBY, Lenovo B40-30, B50-30, B50-30 touch, E40-30 Laptops
    2. Update the SSD's firmware to  MU02 (latest as of this writing).
    http://www.crucial.com/usa/en/support-ssd-firmware
    3. Using the stock HDD, connect the Crucial SSD and convert the volume to MBR first to see if there's a compatibility using the drive as GPT.
    If none of the above methods works then there's likely a compatibility issue with the SSD's controller and/or the BIOS (similar to this thread). In this case, consider using a different brand (e.g., Samsung) and observe.
    Regards

  • In Every Page of Employee Self Service it is displaying this Error.

    Hi All Experts,
    In Employee Self Service i am Getting this Error,overview page is also not displayed.
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
        at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
        at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
        at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
        ... 60 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Version null
    DOM version null
    Client Type msie7
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0015.20080131100237.0000 (release=645_VAL_REL, buildtime=2008-02-15:22:35:17[UTC], changelist=475271, host=pwdfm101), build date: Tue Jul 08 13:48:16 GMT+05:30 2008
    J2EE Engine 7.00 patchlevel 110760.44
    Java VM Java HotSpot(TM) Server VM, version:1.4.2_13-b06, vendor: Sun Microsystems Inc.
    Operating system Windows 2003, version: 5.2, architecture: x86
    Session & Other
    Session Locale en_US
    Time of Failure Thu Jul 31 10:12:26 GMT+05:30 2008 (Java Time: 1217479346562)
    Web Dynpro Code Generation Infos
    sap.com/pb
    SapDictionaryGenerationCore 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:46:55[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:47:02[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:35:31[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:27[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:15[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:09[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:44:27[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:49:22[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
    SapWebDynproGenerationCore 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:33[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/pb_api
    SapDictionaryGenerationCore 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:46:55[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0014.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:47:02[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0014.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:35:31[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:27[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:15[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0014.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:36:09[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0014.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:44:27[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0014.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:49:22[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
    SapWebDynproGenerationCore 7.0014.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-11-17:11:52:33[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0014.20071029095230.0000 (release=645_VAL_REL, buildtime=2007-11-17:12:01:49[UTC], changelist=466194, host=pwdfm101)
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
         at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
         at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
         at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
         at com.sap.pcuigp.xssfpm.java.MessageManager.handleException(MessageManager.java:259)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:104)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:323)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:256)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:154)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:237)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:842)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.connectModel(FPMComponent.java:1072)
         at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:141)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:233)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:182)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

    what user name did you use in JCo??? and the user you made can you give me some insight steps on it...
    i mean the user is refernce user, dialuge user or what user.....
    My basis team is using their own user name in JCO, bcoz of which only data relating to their user name is showing in ESS / MSS for all employees of PORTAL
    also please let me know which profile you used for the user of JCO.
    Regards

  • Analysis Services Execute DDL Task Internal error

    Hi all,
    I need help in solving this sporadic problem...  the dimension below (blanked out as xxxx) is based on a view.  The cube processes fine many times - but fails - abruptly once a week... it's being called from a sql job.
    Any ideas?  Thanks in advance!!
    Error: 2010-06-28 15:45:17.69     Code: 0xC1000007     Source: xxxxxxx Analysis Services Execute DDL Task     Description: Internal error: The operation terminated unsuccessfully.  End Error 
    Error: 2010-06-28 15:45:17.69     Code: 0xC11F000D     Source: xxxxxxx Analysis Services Execute DDL Task     Description: Errors in the OLAP storage engine: An error occurred while the 'xxxxx' attribute
    of the 'xxxxx' dimension from the 'xxxxxx' database was being processed.  End Error  Error: 2010-06-28 15:45:17.69     Code: 0xC11F0006     Source: xxxxxxx Analysis Services Execute DDL Task    
    Description: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.  End Error  Error: 2010-06-28 15:45:17.69    
    Code: 0xC11C0002     Source: xxxxxx Analysis Services Execute DDL Task     Description: Server: The operation has been cancelled.  End Error  DTExec: The package execution returned DTSER_FAILURE (1). 
    Started:  3:45:00 PM  Finished: 3:45:17 PM  Elapsed:  17.328 seconds.  The package execution failed.  The step failed.
    Harsh B

    (From http://msdn.microsoft.com/en-us/library/cc966526.aspx)
    "ExternalCommandTimeout is a server property that is used to set the number of seconds that SSAS should wait to time out when issuing commands to external data sources, such as relational and other OLAP sources."
    "ExternalConnectionTimeout is a server property that is used to set the number of seconds, by default, that SSAS should wait to time out when connecting to external data sources, such as relational and other OLAP sources."
    What you set it to, it's absolutely up to you... But as I see it in your log, your task failed in 17 and 9 seconds... So I think you can multiply the values by 10, I guess the situation won't change... But it is worth to check it at least.
    So... How often your fact table gets new (degenerate) dimension reference values? Is it a process update, or a process full command? I really would like to see it :)
    -- Zoltán Horváth
    -- MCITP SQL Server Business Intelligence Developer 2005, 2008
    -- Please mark posts as answered or helpful where appropriate.

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

  • Service 'sapgw53' unknown / CPI-C error CM_PRODUCT

    Hi SAP Gurus,
    I am trying to create RFC destination in 46d system and while testing the connection I am getting following error message. Pl. help mein resolving the issue. I have created the RFC destination successfully from one system to this system. But gettin this error while creating RFC in this system.
    "service 'sapgw53' unknown / CPI-C error CM_PRODUCT"
    Following are the details
    ERROR                service 'sapgw53' unknown
    LOCATION             SAP-Gateway on host nlaslt12 / sapgw01
    DETAIL               NiIServToAddr
    COMPONENT            NI (network interface)
    COUNTER              59493
    MODULE               nixxi.c
    LINE                 2338
    RETURN CODE          -3
    SUBRC                    0
    RELEASE              46D
    TIME                 Fri Dec 14 14:53:42 2007
    VERSION              34
    thanx,
    Rohit

    Hi Juan,
    Actually I am creating RFC for the IDOC-to-IDOC between two systems. On one system I have created RFC connection (Destination) pointing to this server which is working fine. But when I am creating RFC on this system pointing to the other system it is throwing this error.
    Also Pl. let me know how can I check the service file for the entry and if not found how can I create that bcos I don't hv access to the OS (HP UX) on which I am creating the RFC connection.
    Thanx and Regards,
    Rohit

  • KIMYONG:  "Service Component Container Not Running"  error 시 조치사항

    KIMYONG: "Service Component Container Not Running" error 시 조치사항
    Purpose
    WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
    이를 조치하는 방법은
    ERROR
    CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
    "THE SERVICE ERROR COMPONENT CONTAINER"
    Solution
    전체적인 절차는 아래와 같습니다.
    1. apache 를 bounce 합니다.
    2. Workflow Mailer Service를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Service Components icon
    d. Click on the Workflow Mailer Service link (Container column)
    e. Select Workflow Mailer Service
    f. Select Start from the list of values (top)
    g. Click on go.
    h. Wait until the Workflow Mailer service is "Activated"
    3. Workflow Agent listener Service 를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Service Components icon
    d. Click on the Workflow Agent listener Service link (Container column)
    e. Select Workflow Agent listener Service
    f. Select Start from the list of values (top)
    g. Click on go.
    h. Wait until the Workflow Agent listener service is "Activated"
    4. Workflow Mailer를 시작합니다.
    a. Workflow administrator Web Applications Responsibility
    b. Workflow Manager
    c. Click on Notification Mailers icon
    d. Select Workflow Notification Mailer
    e. Select Start from the list of values (top)
    g. Click on go.
    h. Do the same for the workflow deferred agent listener
    Reference
    Note 559388.1

    Hi,
    I'm having the same problem as you did.
    I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
    And it showed
    An error has occurred!
    The Service Component Container is not running.
    Should I uninstall my Oracle Workflow?
    And install a new installation of Oracle Workflow?
    What does it mean by the "wfinstall"?
    Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
    Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
    Or should I uninstall all of my Oracle installation and start installing from the beginning?
    BTW, what if I don't use (or have) OID?
    Is it required?
    Any clue would be grateful.
    Thanks.
    Buntoro

  • Unable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Plea

    nable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Please!

    Hi skydivingsnowman,
    I'm sorry you're having such trouble using the ExportPDF service. What browser are you using?
    Please try clearing your browser cache, or using a different browser (here's a list of supported browsers:   http://www.adobe.com/acom/systemreqs/.
    Please let me know if that works.
    Best,
    Sara

  • Every time I try to install windows service pack 2 I get error message WindowsUpd​ate_800040​05

    When I try to install windows service pack 2 I get error message WindowsUpdate_80004005, has anyone else had this problem and how do you fix it

    If you have an external drive (USB thumbdrive or hard disk) connected, disconnect it and try the service pack installation again. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • Stuck at "Clone database creation in progress...."

    Anyone could please tell me why? I've tried to install Oracle9i on Solaris8...by its Default Configuation via ./runInstaller (GUI) I just fill DB name.... ,but now I stuck at "Creating and starting Oracle instance"(that is,Clone database creation in

  • Pan and Zoom Effect, which PE version introduced it?

    I like my PE 3.0 but it does not seem to offer the Pan and Zoom effect. Or am I just not seeing it.  Does anyone know which later version introduced it? I know 8.0 has it, but when did it come along?  The bundled version of Photoshop 5.0 it came with

  • Samsung ML-2010 not working with 10.5.8 - HELP PLEASE

    Howdy, I know that there are others having this problem. Any advice would be greatly appreciated. I have been using a Samsung ML-2010 with Tiger (on my MacBook) and on Leopard (on my iMac) and all has been working great. Have recently caught up with

  • Is it possible to set the heap size limits in system-wide config?

    Hi, I am trying to set the JRE heap size limits (-Xms and -Xmx) by using the system-level deployment.properties file. The JRE version is 1.6 update 6. Normally, I would have something like this in the user-level deployment.properties file: deployment

  • ITunes is telling me I am not connected to the internet!

    This is so frustrating I have been unable to access my iTunes account for months. I can access through my iPhone but not on my pc. I have done all the usual like putting iTune and iTunehelper as exceptions on my firewall, I have cleared my DNS cache