Detail differentiation between add query,combined query and sub query

HI
I would like to know the detail differentiation between add query,combined query and sub query with universe
correct me if I a wrong
Add query : adding of different query from different universe and also with in same universe.
Combined query : combining query using operators(Union,intersection,minus)with in same universe.
Sub query :getting results from the sub query and the result serves as the data for main query within same universe.

Hi,
I would advise you to check the product documentation under http://help.sap.com/
regards
Steph

Similar Messages

Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page!

Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated!

Big Colour and detail changes between Original Nikon RAW files and the images created on the Preview page! Yes there are distinct visual changes when I preview my Nikon NEF RAW Files.Please note I do not use iPhoto at all.
If you view it as a contact sheet straight from the original folder there are no alterations but the moment you double click and want to 'Preview' it, this new preview page introduces very noticeable distortions : lighter shading goes missing and colour goes darker e.g orange turns red and mid blue goes deep blue! Alarmingly the little column on the left of the preview page showing the collection shows the original file colours and then after a few seconds show the new distorted image...you can see this visible change and it takes place after a few seconds once you double click! Also if you use Apple's 'Cover Flow' to preview, this function will replace your original RAW file with the new 'altered preview' image!
I have raised this with Apple but they have yet to reply...has anyone ever experienced this? I have used my Mac book for 18months only noticed it about 5 days ago!
I went to Apple store and we tried it in other laptops and Macs and it happened to all of them so we think this is a software issue and not down to the laptop.
Any help is much appreciated!

Difference between "Add File to Library" and "Import"

I was just wondering...what is the difference between the "Add File to Library" option and the "Import" option in iTunes? Does one add the files to your iTunes Music folder and one leaves it in its current location? What exactly is the difference?

Add simply puts the file into iTunes.
Import will convert it to the format/bitrate selected in iTunes prefs -> Advanced - Importing and adds it to the library.

Difference between add-in Java-Stack and standalone stacks

Hello experts,
is there any difference between a Java-Stack as add-in in ABAP AS and two standalone stacks, aside from that the standalone systems are physically seperated. What other reasons are there to choose the one or the other? Is it performance or scalability? Are there any differences for developers (for example on XI or BI) or is the difference only important for administrators?
Best regards,
David

Hi David,
I've just found the following document is uploaded on SDN.
[How to Deploy SAP NetWeaver: Dual Stack vs. Separated Stacks|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d074d7de-8d55-2b10-1e94-fb2e9d2893d1]
Hope this help you
regards,
Yoshi

Differentiation between ADF Di disconnected mode and normal mode

Hi,
While opening the Di Excel, I need to differentiate whether excel is opened from disconnected mode or normal mode from the UI.
When opened from normal mode, I have to execute some method actions and while opening from disconnected mode I have to skip executing some method actions.
Any updates could be of great help.
Thanks in Advance,
Vinod Tummuri

Hi Vinod,
There is no way to determine if the excel is opened in connected mode / disconnected mode.
If you've saved the workbook locally, then opening it from the local file system is disconnected mode. However, when you perform some operation (server side - say executing a method , performing download on the table etc), will initiate a request to the server, which will then work as online.
-Arun

Output mismatch between BEx query output and WebI Report output

Hi All,
I have a BEx query in which there are only characteristics placed in rows.
There are combinations of the values of the characteristics giving different records in the query output.
Date is one of the characterisctics in the query output.
There is an output mismatch between the query output and the WebI report output in the following case:
When there are 'Not Assigned' or '#' or blank values, there are additional entries(rows) in the WebI report, giving repeating or wrong entries in the Date field. This is incorrect data.
Is this because of the 'Not Assigned' or '#' or blank values of the Characteristics or is there any other reason?
How do I fix this?
Please helo me with this.
Thanks and Regards,
Srilakshmi B

Hi Rajesh,
I need to verify the WebI report output for records with # and 'Not assigned' values for the cHracteristics in the report.
So I cannot check the WebI report by hiding the # or Not assigned values.
The problem is that in the Query output the records are like these shown below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)             No value
Where as the WebI report output is as below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)            Date1
As shown here, there are wrong/repeating entries for the Date field in the WebI report output.
Please check this and let me know what could be the issue and how do I fix it.
Thanks and Regards,
Srilakshmi B

Function Add a combined query

Hello,
I created two different universes based on a SAP BEx query. I can create reports with WebI based on both universes thats no problem.
If I want to create a combined query based on that 2 universes it is not possible the button "Add a combined query" is not available. Does anybody know when this will be available? Or am I doing something wrong?
Thanks for your reply.
Kind regards,
Jule
System Information: BIP 4.0 SP 02 Patch 11

Ok, could you please try the following:
1. Import the universe which you want to use.
2. Go to File>Parameters>SQL tab.
3. Check the checkbox for "Allow use of union,intersect and minus operator".
4. Save and export that universe.
Then if the problem persists, could you please test if the issue occurs with the administrator account?
Kind Regards,

Mapping between the query/report and the role with technical names - BI Sec

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?

I looked into this quite a while ago and cannot remember the exact details, but I think there were 3 tables needed together with a structure to explore with a function module, and you need to use the program ID to think them.
If you look in SQ01 then I am sure you will find one of the tables, and then search from there onward.
Alternately, while searching you might find a nice report which does this for you.
Hope that helps and let us know whether you find it.
Cheers,
Julius

Add journal batch id and journal name in my query

Hello all,
I have inserted a line in GL interface which I have been attached below.
insert into GL_INTERFACE (
STATUS, LEDGER_ID, USER_JE_SOURCE_NAME, USER_JE_CATEGORY_NAME,
ACCOUNTING_DATE, CURRENCY_CODE, DATE_CREATED, CREATED_BY,
SEGMENT1, SEGMENT2, SEGMENT3, SEGMENT4, SEGMENT5,
ACTUAL_FLAG, ENTERED_DR, ENTERED_CR, GROUP_ID
values (
*'NEW', 1, 'Payroll', 'Payroll',*
to_date('DEC-22-2008','MON-DD-YYYY'), 'USD',
to_date('DEC-23-2008','MON-DD-YYYY'), 1092,
*'01', '830', '5300', '0000', '000',*
*'A', 1000.00, 0.00, 12345*
insert into GL_INTERFACE (
STATUS, LEDGER_ID, USER_JE_SOURCE_NAME, USER_JE_CATEGORY_NAME,
ACCOUNTING_DATE, CURRENCY_CODE, DATE_CREATED, CREATED_BY,
SEGMENT1, SEGMENT2, SEGMENT3, SEGMENT4, SEGMENT5,
ACTUAL_FLAG, ENTERED_DR, ENTERED_CR, GROUP_ID
values (
*'NEW', 1, 'Payroll', 'Payroll',*
to_date('DEC-22-2008','MON-DD-YYYY'), 'USD',
to_date('DEC-23-2008','MON-DD-YYYY'), 1092,
*'01', '000', '1110', '0000', '000',*
*'A', 0.00, 1000.00, 12345*
My doubt is, How to add Journal batch name and Journal name in this query. Because I am seeing only batch_id not name.
Please guide me how to achieve.
Thanks and Regards,
Muthu

I found it, Reference1 and 3

Diff between sap query and abap query

diff between sap query and abap query

Hi,
ABAP query is mostly used by functional consultants.
SAP Query :
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query,:
As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
regards,
vasavi.
reward if it is helpful.

Mapping between the query/report and the role with technical names

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?
Edited by: Phoenix on Jul 26, 2008 4:15 PM

Posted in wrong forum

How to combine insert and where query ?

hi..
could somebody guide me how to combine insert and where query ?
insert into tdc_imarspc (ANUMBER,EMF_ID,PRODUCT) values ('1234567','65','ITFS')
where anumber not like '1234567';
Thank you,
Baharin

Hi, Baharin,
As Mahesh said, WHERE only works on a query.
You can always base a query on dual, like this:
INSERT INTO
tdc_imarspc (ANUMBER,     EMF_ID,     PRODUCT)
SELECT          '1234567',     '65',     'ITFS'
FROM         dual
WHERE          anumber      NOT LIKE '1234567';Of course, you can use a literal, like '1234567' in both places where I used the bind variable, but if you're not using a variable, why would you want to?
You could also put all the literals in a sub-query (based on dual), and reference column names in the main WHERE clause, LIKE THIS:
INSERT INTO
tdc_imarspc (     ANUMBER,     EMF_ID,          PRODUCT)
WITH     sub_q
AS (
    SELECT    '1234567' AS an,     '65' AS ei,     'ITFS' AS pr
    FROM      dual
SELECT          an,          ei,          pr
FROM     sub_q
WHERE      an      NOT LIKE '1234567';
I assume you're not really saying
an      NOT LIKE '1234567'If you're not using any wild cards after LIKE, you might as well use !=
an      != '1234567'

Difference between sap query and sap ad hoc query

Hello Experts-
Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
Thanks,

Hi,
SAP Query
Purpose
The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
All data required by a user for a report can be read from various tables.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
AD Hoc Query
Definition
A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
Use
You can use the Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
In particular it enables you to:
·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
·        Restrict or filter key figures and characteristics
·        Use predefined key figure structures and restricted or calculated key figures in the query
·        Set or change query properties and key figure/characteristic properties in the query
·        Create or change conditions and exceptions
When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
·        You cannot integrate variables into the query directly.
However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
-        You cannot use key figures or key figure structures in the filter.
-        You cannot define exception cells, since this requires two structures.
You cannot create the following objects using the Ad-hoc Query Designer Web item:
-         Reusable structures
-         Reusable restricted key figures
-         Reusable calculated key figures
-        Local calculated key figures
You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
"Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
Check these links....
http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
Reward points if useful....
Regards
AK

How to Create Instances in the Transient Root Node and Sub Nodes from Root Node Query Method ?

Hi All,
I am Creating a BOPF BO with 3 Nodes,
Node 1) ROOT -- > contains a query,
using Root Node I have created Search UIBB Configuration in FBI.
In testing -- > when i enter Data in the Search Criteria Fields am able to get the details in to the query method
from Imporing parameter : 'IT_SELECTION_PARAMETERS'.
HERE I am fetching data from a standard table and trying to fill the data in the Node : 'MNR_SEARCH_RESULT'.
How to Append data to the Sub node 'MNR_SEARCH_RESULT' when there is no Node instance created in the ROOT Node ?
For This I have created an instance in the ROOT Node and Using that I tried to create Instance in the Sub Node 'MNR_SEARCH_RESULT'.
Below is my code which i have placed in the Query method ..
DATA : LR_DATA TYPE REF TO ZBO_S_ROOT1.
DATA : LR_SEARCH_RES TYPE REF TO ZBO_S_MNR_SEARCH_RESULT.
DATA : LO_CI_SERVICE_MANAGER TYPE REF TO /BOBF/IF_TRA_SERVICE_MANAGER,
        LO_TRANSACTION_MANAGER TYPE REF TO /BOBF/IF_TRA_TRANSACTION_MGR.
   LO_CI_SERVICE_MANAGER = /BOBF/CL_TRA_SERV_MGR_FACTORY=>GET_SERVICE_MANAGER( IV_BO_KEY = ZIF_BO_TEST_PO_C=>SC_BO_KEY ).
   LO_TRANSACTION_MANAGER = /BOBF/CL_TRA_TRANS_MGR_FACTORY=>GET_TRANSACTION_MANAGER( ).
CREATE DATA LR_DATA.
LR_DATA->KEY = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( ).
LR_DATA->ROOT_KEY   = IS_CTX-ROOT_NODE_KEY.
LR_DATA->PIPO_MAT_ID = '100100'.
LR_DATA->PIPO_MAT_DESC = 'MATERIAL'.
LR_DATA->PIPO_SPRAS = 'E'.
LR_DATA->PIPO_MATL_TYPE = 'ZPMI'.
LR_DATA->PIPO_MATL_GROUP = 'ZKK'.
     DATA lt_mod      TYPE /bobf/t_frw_modification.
     DATA lo_change   TYPE REF TO /bobf/if_tra_change.
     DATA lo_message TYPE REF TO /bobf/if_frw_message.
     FIELD-SYMBOLS: <ls_mod> LIKE LINE OF lt_mod.
    APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod> .
    <ls_mod>-node        =   ZIF_BO_TEST_PO_C=>sc_node-ROOT.
    <ls_mod>-change_mode = /bobf/if_frw_c=>sc_modify_create.
    <ls_mod>-key         = LR_DATA->KEY.
    <ls_mod>-data        = LR_DATA.
DATA : LT_CHG_FIELDS TYPE /BOBF/T_FRW_NAME.
DATA : LS_CHG_FIELDS LIKE LINE OF LT_CHG_FIELDS.
DATA : LV_KEY TYPE /BOBF/CONF_KEY.
CALL METHOD IO_MODIFY->CREATE
   EXPORTING
     IV_NODE            = ZIF_BO_TEST_PO_C=>sc_node-ROOT
     IV_KEY             = LR_DATA->KEY
     IS_DATA            = LR_DATA
     IV_ROOT_KEY        = IS_CTX-ROOT_NODE_KEY
   IMPORTING
     EV_KEY             = LV_KEY .
CREATE DATA LR_SEARCH_RES.
LR_SEARCH_RES->KEY           = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( )..
LR_SEARCH_RES->PARENT_KEY    = LV_KEY.
LR_SEARCH_RES->ROOT_KEY    = LV_KEY.
LR_SEARCH_RES->MATNR    = '123'.
LR_SEARCH_RES->ERSDA    = SY-DATUM.
LR_SEARCH_RES->ERNAM    = SY-UNAME.
**LR_SEARCH_RES->LAEDA    = .
**LR_SEARCH_RES->AENAM    = .
**LR_SEARCH_RES->VPSTA    = .
*LR_SEARCH_RES->LVORM    = .
LR_SEARCH_RES->MTART    = 'ZPI'.
LR_SEARCH_RES->MBRSH    = 'ZTP' .
LR_SEARCH_RES->MATKL    = 'MAT'.
**LR_SEARCH_RES->BISMT    = ''
**LR_SEARCH_RES->MEINS    =
CALL METHOD io_modify->create
           EXPORTING
             iv_node            = ZIF_BO_TEST_PO_C=>sc_node-MNR_SEARCH_RESULT
             is_data            = LR_SEARCH_RES
             iv_assoc_key       = ZIF_BO_TEST_PO_C=>sc_association-root-MNR_SEARCH_RESULT
             iv_source_node_key = ZIF_BO_TEST_PO_C=>sc_node-root
             iv_source_key      = LV_KEY
             iv_root_key        = LV_KEY.
I am Unable to set data to the Node . I did not get any error message or Dump while executing . when i tried to retrive data I got the details from the node but am unable to view those details in the FBI UI and BOBT UI while testing .
Please provide your valuable Suggestions.
Thanks in Adv.
Thanks ,
Kranthi Kumar M.

Hi Kranthi,
For your requirement you need only two nodes. Root Node and Result node. Use the same structure for both.
To create Instance while search.
Create Query method with input type which has the required fields for selection criteria.
Fetch the data and create instance in the root node.
Pass the new instance key as exporting parameter form Query Method.
To Move data from ROOT to Result.
Create a action at root node.
Write a code to create new entries in Result node.
Then configure the Search UIBB and display result in List UIBB. Add button and assign the action MOVE_MAT_2_RESULT.
Create another List uibb to display data from Result node.
Connect the UIBBs using wire schema. SEARCH -> LIST(ROOT) ---> LIST(RESULT).
Give src node association for ROOT to RESULT Configuration.
Regards,
Sunil

Add Query Task Excepcion OSM 7.0.3

Hello,
I am creating a new project in the version 7.0.3 of OSM but when I go to the permissions tab of the order and add a role, if I want to associate a query task for this role, gives the following exception.
"Sequence Model Orchestration Error - Detail from ncaOsmQueryTask Order query task is not defined in ProjectOrder workspace."
When I open a project created in version 7.0.2 of OSM with this same functionality throws no exception when compiling.
But if this project will add another query task immediately throws the error when compiling.
If anyone knows a similar case can help me I would appreciate your input.
regards

Hi Andres,
We tried the same procedure at our end with 7.0.3 and it worked well. The question that comes to my mind is what version of Design Studio are you using? I would suggest you to use DS 3.1.3.1 and above.
Thanks,
Deep

Detail differentiation between add query,combined query and sub query

Similar Messages

Maybe you are looking for