Detail Info Pop Up

Hi
I saw an article a week or two ago about a cool example of having a hover over icon which when clicked showed some detail info in another cell somewhere on the page. I read it and though "Hmm, thats nice" and forgot about it but now I have the need for this exact functionality!!
Does anyone remember the article I am talking about and have a link to it?
Can't remember if it was on here or the JDeveloper site
Cheers
Rich

Hi Richard
I was just about to point you to the article as I noticed you had already found out yourself. You are right - it is an interesting piece.... Well, thanks for the reference anyway. Hope it works for you.
best regards,
Lucas

Similar Messages

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
Removing the battery:
Shut down the computer. Disconnect any cords connected to the computer.
Turn the computer over.
Locate the battery latch on one side of the battery.
Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
Lift the battery out.
Installing the battery:
Place the right side of the battery into the battery compartment at an angle, as shown below.
Gently press the left side of the battery down until it sits flat.
While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

How to get detail info of application acknowledgement in BPM send step

Hello
in BPM we will send an async message to SAP backend system, we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in the acknowledgement message.
As you know in PI monitor, you can open the acknowledgement message and you can see the error texts that are sent by the SAP backend system to PI in the acknowledgement message. However seems like there is no standard way in PI BPM to get the error texts inside the acknowledgement. In the send step you can only specify that application ACK is required, if negative ACK comes in, an exception is raised and you can handle the exception in the exception branch. However there is nowhere to capture the acknowledgement message to get the detail error texts.
Anyone has good idea to get the error texts from the application acknowledgment message inside BPM/
Thanks

we need to know if the message is successfully process or not, if not, we need to get the detail info which is returned in
the acknowledgement message
One way to have the above requirement done is make the process synchronous (if RFC/ Proxy). The response message should contain the state of processing of the message inside SAP....now in the BPM make a check on the response message to see if it is a success or failure....you can apply logic like is success terminate the BPM without any alert.....if failure raise an alert/ send a mail.
Regards,
Abhishek.

It says in the corner of my itunes account that i still have money from my itunes gift card that i redeemed, but when i buy a song my billing info pops up. Why can't I use the money?

It says in the corner of my itunes account that i still have money from my itunes card that i redeemed, but when i try to buy a song, the billing info. pops up. Why can't i use the money on my card?

It is simply asking you to verify your account info. Select None for the CC.
It will still pay with your gift card balance.

How to get more detailed info while running a BAPI in test mode

Hi friends
I am trying to test 'BAPI_QUOTATION_CREATEDATA2' by opening the BAPI with 'se37' and then clicking on the button Test/Execute (F8) and entering all the data required.
However, I get a message as follows.
'555 The sales document is not yet complete: Edit data'
While creating the QUOTE manually using 'va21' I get more detailed messages like what kind of data is missing 'whether valid to date is missing ..etc.etc.'.
However, while testing thro' bapi, all it says is that sales document is not complete.
Is there a way to see more detailed info as to what information is missing, so that I can put them before running.
Your feedback or suggesions will be highly appreciated.
Thansk
Ram

Thanks Rob
Actually it says
W V1 555 The sales document is not yet complete: Edit data.
As I said, I am running the BAPI manually by opening the BAPI using SE37 and then clicking on the F8 button. This inreturn will give me an opportunity to click on different object trees to enter the sample data. So I have entered everything that I thought was needed. But still it keeps complaining that the info is not complete but no further details.
Hope there is some log file or something that I can see to get more details.
Thanks
Ram

Where can i find detailed info on user management in oracle 10g?

hi
pls let me know where i can find the more detailed info on user management and security of database
i like to know how to create users and give permissions to users like they should be able to create tables and other objects.
thankx in advance.

just do it wrote:
hi
pls let me know where i can find the more detailed info on user management and security of database
i like to know how to create users and give permissions to users like they should be able to create tables and other objects.
thankx in advance.when all else fails Read The Fine Manual
http://docs.oracle.com/cd/E11882_01/server.112/e25789/toc.htm

DVD detailed Info- software comparable for the mac

I need to help someone and need some detailed info a some DVds they gave me. Is there mac software to show details like this PC software here:
http://www.videohelp.com/tools/GSpot
Or how do I do the same thing on a mac? Get info isnt much help. Im new to this.

If you want to find out what CODECS are used in audio and video files you have, simply open the Apple Quicktime Player and then drag the file you want information about to the Quicktime Player icon in the dock. Then select WINDOW>SHOW MOVIE INSPECTOR (this is for the Quicktime X Player - older versions are slight different).
need some detailed info a some DVds
DVDs all use mpg-2 video encoding.

Detail info on SAP-ABAP interfaces

Hi experts,
                 i need detailed info on abap interfaces, means what are all interfaces in ABAP & how that will work ......i would like to know that BDC program comes under interface or not .....
Thanks in advance

Hi Narayana,
                               R/3 Application
                          ==================
                           ABAP work bench
   uesr interface ================== commntn interface
                         R/3 Basis(middleware)
                         ===================
                          System software(OS)
Integration of R/3 with the external application via open interface
OLE,RFC,ALE,EDI,CPI-C etc are the interfaces ...
Thanks
Mohinder Singh Chauhan

Where can I get detailed info on bug fixes?

Hi,
Where can I get more information on bug fixes that are listed in the release notes of each version? For instance, I am interested in each of the following ones.
GRANITE-1215 - Workflow Monitoring via JMX
CRX-4167 - Improved handling for backup procedure on ""listDir = /""
GRANITE-877 - Fixed ""Too many open files"" issue in monitoring
GRANITE-741 - Replication can handle missing content in the activation queue
GRANITE-1090 - Configure exclusion of publish instances for activation status updates
CRX-2943 - Cluster: Enable audit log on workspaces
Apart from the one line descriptions, I need more detailed info like what was the issue or why it occurs and how was it fixed, looking for something similar to a KB article.
Thanks

These are internal reference numbers and the detailed descriptions are not available publicly.
Please note that they are not all bug fixes, they can also be: improvements; enhancement requests; and new features.

Is there a wat to get detailed info on numbers dialed and received? Seems my phone only stores apx. 2 months of that data. Thanks

Is there a way to get detailed info on numbers dialed and received? Seems my phone stores about 2 months of this information. Thanks.

Hi there, molsoniceman! You certainly can get call details. The best place to collect that info is through My Verizon Online (http://bit.ly/xB4iTc ). If you're already registered as an Account Member or Account Owner, please log in and review your detailed billing statements. It should show the dates, times, phone numbers, and call duration for all calls within specific billing cycles. Your last 18 months of statements should be available for your review!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.

BPMON Alerts Detail Info - how to switch to use TRUSTED RFC ?

Hello Experts,
we have configured BPMON for our customer and it works fine, alerts are flowing in.
Now the users start using it and they complain about having a logon prompt popup every time the hit "Detail info" button to jump into satellite system to see alert details. It's very annoying when they need to check many alerts simultaneously.
So I investigated and found that the function is using LOGIN type RFC for the logon and it seems that SAP designed it to work this way, as SAP's own DEMO shows same thing.
Question: Is there a legitimate way to make BPMON function use TRUSTED RFC to show alert details instead of LOGIN RFC ?
By "legitimate" I mean, I know the LOGIN RFC can be "adjusted" to behave like TRUSTED, but that is not "legal" fix especially in production.
Appreciate any comments.
Thanks
Elena

Hi Elena
I assume you are using Login RFC in SolMan setup.
If you switch current RFC to Trusted RFC, if the user has Trusted RFC profile and same user exist in both system, user can use trusted connection.
Please go to transaction SolMan setup, and side bar menu managed system configuration and open managed config screen to target system. In the 3 rd step of the wizard, there is a place to configure RFC.
In case if BPMon, Read RFC is used for data collection(as of SAP TMW is used instead of READ).
And then there are 3 RFC TMW, Trusted and last one(RFC for Solution manager).
When you press the detail info button, last RFC is used. To this RFC type, you can assign RFC Login( this will ask login screen by default) or Trused RFC. I think you assin RFC login right now. That's why you have popup.
If you switch this to Trused one, Trused RFC is used.
Best Regards
Keiji

BPMON Alerts "Detail info" disappeared in SP10-11

Hi BPMON Experts,
we have upgraded SOLMAN from SP08 to SP11 (skipping SP10).
We have already had BPMON and Analytics setup in SP08.
Now finding out that in SP11the "Detail Info" and SP13 buttons in Alert Inbox completely disappeared.
Reading TECHED mats from last year, it sais that BPMON alert details are not integrated in SP10.
However SAP recommends for users with old BPMON settings to still use OLD BPO workcenter to realize full functionality..
But without detail info button - there is not much use for it.
Is anyone else experiencing same problem ?
Appreciate your comments.
Thanks
Elena

Hi Elena
I wonder whether you use MAI based BPMon (BPMon on new monitoring infrastructure) or use classic one... If the BPMon and BP Analytics setting were made when SP was SP8, I assume it is Classic one.
Anyway, let me clarify some points.
As you know from Teched replay, as of Solution Manager 7.1 SP10, BPMon offer new BPMon that based on monitoring alert infrastructure (MAI). But this does not means, after the SP10, your existing BPMon or BP Analytics setting runs on new MAI infra. Without switching on the MAI, your solution still run on Old infrastructure (I will use classic BPMon engine here).
Since all the BPMon cases are not covered yet in SP10/SP11 and also conversion tool from classic BPMon to MAI BPMon is not available in SP10/SP11, using Classic BPMon is still recommended.
So if you simply update SolMan SP from SP8 to 11, your BPMon and BP Analytics Monitors still run classic BPMon infra. Here basically everything should be same.
So I bit suprise you have some issue (detail info is not available, ST13<?> button is nto avaialble)...
In my understanding, there should not be the issue if you still run classic BPMon infra.
So if this is the case, I recommend you to check your monitor setting. If you update ST-A/PI in managed system during SP11 upgrade, I recommend you to conduct following to get latest repository.
1. Go to BPMon setup and chose your logical component area. And conduct load monitor definition.
By pressing this, latest monitor definition is loaded from managed system to SolMan.
2.To refrect the latest repository content, go to logical componet and choose all monitor and de-activate ->Generate->Activate existing monitors.
For ST13 button, I recommend you to check your monitor setting (analysis tool tab). If not T-CD/Program assigned to your monitor, the button is not avaialble in alert inbox. So you need to assign the T-CD /Program that you want to see in alert inbx in analysis tool tab of your monitor.
If your case, is not based on classic BPMon (You newly create solution and switch on MAI setting to your Solution as attached picture), I recommend you to chck new Alert Inbox and open detail info.
As of SP10, you can control classic / MAI BPMon per solution (but if there is existing monitor, you cannot switch. So you need conversion tool that is planned SP12 probably).
In MAI based BPMon, there is BPO workcenter. And it offer a bit different alert inbox.
In new MAI based Alert inbox, to use detail info button, you need to press show detail button.
(like technical monitoring, new alert inbox support grouping etc.. so to see detail info, you need to go into 1 more detail level).
In detail display, detail info should be still avaialble like attached picture (but now it is http based. not GUI base).
So even the new BPMon, detail info still should be avaialble. Also you should be able to call transaction/program like you could do before. (actually in new infra, it can do more).
I think in the teched replay, it might says "BPMon BW Alert report is not supported yet" in new BPMon....
Hope above info help you.

I am trying to transfer files from my laptop to pages in ipad. I could sure use some help with detailed info. Thanks!

Can anyone help give me detailed info re: how to transfer files from PC to ipad using my icloud and Pages? Thanks.

If you go to iCloud.com you can actually just upload all your documents there qnd convert them to a pages file. You can then go to your iPad and go to your pages app and have access to all the documents that you've recently uploaded on to iCloud.com. You just need to make sure that on your iPad in settings->iCloud->documents and data is turned on. If it is then anything you do on the iCloud or iPad will all sync and you can access both items from either platform.
If you have any other questions feel free to ask. You can also visit an apple store where they have free classes on iCloud and other topics.
Hope this helps.

Detail Info Pop Up

Similar Messages

Maybe you are looking for