Detail information showing up on multiple areas of a report

Post Author: Theresa Rose
CA Forum: Crystal Reports
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

those are imessages, you guys must be using the same apple id for imessages.
go to settings>messages>send &recieve and check whether the same id is listed in the all the phones, if so change to a different id or remove it.

Similar Messages

Detail Information to show in multiple areas of a report

Post Author: Theresa Rose
CA Forum: General
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

Detail information in multiple areas of a report

Post Author: Theresa Rose
CA Forum: Crystal Reports
I need detail information to show up on multiple areas of a report that I am working on.There are different areas on a form that I am working on that require multiple lines of detail information. I have tried using a subreport, but when it goes to a second page it doesn't show the correct detail information.

Thanks Gupta.
Please let me know if this BI WAD command is available in 3.5 also or in just 7.0. we are in 3.5 now. if it is 3.5 as well, can you please tell me how to get there.
Thanks
Krishna

Build a project report with detail information

Hi,
I want to build a project report in BW and am not sure if my idea is feasable....
The report should consist of two parts:
the head part consists detailed information about a project like ID, status, owner, start date.
The body part contains information about a key figure 'worked hours' drilled down by department and drilled through by calendar month.
I am completely free where I want to store the data to have it available in the report. My idea was to store project head information in an ODS and to store the key figure 'worked hours' in a cube with the characteristics project, month and department.
What would be the best way now to build a report on these information. As far as I know, a normal query is always used to show key figures, but not detailed information of a project. How can I report the information that I want to show in the report header?
Thanks for any help!
Cheers
Tatjana

What is the source of the data coming?
if you are using a custom report and if u thinking data is not huge.. keep every thing in one ODS and drag in the reports of the required fields..
Regards,
Hari

Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.

Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar.

How do I show the details of a customer when they are logged in a secure zone?

How do I show the details of a customer when they are logged in a secure zone?
I want to show the customer details as well as some customer CRM fields that are applied to the customer. None of these are entered via a form, they would be entered by the client. The customer would need to be able to log in to view the information and get an email alert when it is updated. Help!?

Hi,
You might want to look into customer service zones which allows customers once logged in to see their case, order and own details.
- http://kb.worldsecuresystems.com/133/bc_133.html
- http://kb.worldsecuresystems.com/kb/customer-service-area-orders.html
- http://kb.worldsecuresystems.com/kb/allowing-customers-view-update-crm.html
Kind regards,
-Sidney

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

HT2589 Could you show me the full account information (account information)? How can I get the detail information that who charge me?

Could you show me the full account information (account information)? How can I get the detail information that who charge me?

I'm not entirely sure what you are asking, but you can view the purchase history on your account (and view your payment method) on your computer's iTunes : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. On your iPad you can only see a cut-down version via this page (which also allows you to contact iTunes Support if you have a problem with a purchase) : http://reportaproblem.apple.com
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Or do you mean something else ?

Lines are showing multiple times on Invoice Report

Hi,
If Payment Terms are Installments then lines are showing multiple times on Invoice Report.
Suppose Payment Terms are 10 Installments then (Item, Description, Qty, Unit Price and Extended price) lines are showing 10 times.But I need to display only one time line data (Item, Description, Qty, Unit Price and Extended price).
Please help me to achieve this.
Thanks,
Subbarao.

Hi,
Thank you very much for your reply.
I used following ways:
1) <?xdosxlt:distinct_values(LINE_NUMBER)?>
2) <?if:position()=1?><?LINE_NUMBER?><?end if?>
But no luck to achieve the requirement.
I too thought like your Idea (like displaying multiple) but client wants me to display the only one line data.
Thanks,
Subbarao.

'No detailed information exists for this person' while adding new reviewer

Hi All,
This is an extremely urgent issue.
We are getting the following message in SRM while adding a new approver to the Shopping cart once the - 'No detailed information exists for this person'
We have implemented the following OSS Notes in the SRM 5.5 system, Release 700 after rasing a call with SAP.
SAP Pilot OSS note - 1002957
Other OSS Notes -
999528 Adding Ad Hoc Approver fails due to comit erro...
722357 Ad hoc: Commit control with ad hoc enhancement...
990467 Commit Problem with AdHoc Agents...
984582 Problems with Posting Container Data (ad Hoc
 agent...
947296 Inserted/changed approver is not transferred...
910925 SRM Workflow: Ad-hoc agent not found...
803628 BADI workflow: You cannot add an approver
Here are the details
 Cannot add additional approver
 We are now on SRM 5.5 and a document attached shows the
 patch levels
 from SPAM.
 In shop transaction, it is possible to change the
 default approvers,
 but not possible to Add.
 When we add, the system shows the list of available
 approvers, allows
 selection, but "transfer" button does not actually
 transfer.
 When the cart is saved, the added approval shows as "no
 approval
 available".
 We are using the standard workflows for 2 step approval.
 A document is attached to show what happens and the
 results of checks
 we have performed.
 BUS2121 also shows as ok when checked.
Any pointers what could be possible reasons.
Points for sure. !!
Regards
- Atul

Hi Atul,
Here is the list.
 |----- 0000702787 EBP 4.0: Message "Enter a country"
 |----- 0000732828 E-mail messages for work items with incorrect line break
 |----- 0000735026 Memory problems at BBP_GETLIST_INDEX_FILL
 |----- 0000804317 SRM40/SUS/PO: PO inbound with error BBP_PD 147
 |----- 0000862851 PO not ordered due to different locations error
 |----- 0000902956 Changing Account assignment category BE Limit service PO
 |----- 0000911446 No reservation is created
 |----- 0000917869 SRM 5.0: PPOMV_BBP - Vendor address tab page
 |----- 0000919553 SRM 5.0: Termination of output preview for invalid partner
 |----- 0000920363 Shopping cart transfer: Sourcing indicator is not set
 |----- 0000924218 SRM 5.0: wrong error message for non existant auth. PurchOrg
 |----- 0000924811 SRM5.0: Javascript error on document screen
 |----- 0000926750 Shopping cart: Unit of measure is not restored
 |----- 0000926878 Link for expanding details in the shopping cart too small
 |----- 0000927142 SRM5.0: Browser hangs up during attachment upload
 |----- 0000938168 SRM50: Message "No default value from vendor master"
 |----- 0000938296 JavaScript runtime error in the bid invitation
 |----- 0000940805 BBPS_SC_APP_SOS cannot be enhanced
 |----- 0000941935 External requirements displayed as a reference
 |----- 0000942742 Update is cancelled if new source of supply is found
 |----- 0000944592 No location when vendor has changed
 |----- 0000944918 ECS: Find back end purchasing group as a responsible group
 |----- 0000945601 Termination when you display purchase order item detail
 |----- 0000948425 Shopping basket changeable although already approved
 |----- 0000953238 Shopping cart history in the sourcing cockpit
 |----- 0000954066 Follow-On Documents Tab does not get Highlighted
 |----- 0000954409 Error message during approval of a confirmation
 |----- 0000955377 Long runtimes for workflows with blocks
 |----- 0000956108 Empty worklist after clicking button 'Find'
 |----- 0000956723 BBPMAININT:Bus. partner display switches to maintenance mode
 |----- 0000956797 RUSRM50: Limit Purchase Order Functional Area Error Message
 |----- 0000957884 Category Management: Data disappears after program SAVE
 |----- 0000958045 BBPSC04: Delete icon not hidden despite screen variant
 |----- 0000958349 Final delivery with quantity 0
 |----- 0000959528 During PO creation wrong error message BBP_PD 428
 |----- 0000960169 Favorites not saved for 'Purchase for'
 |----- 0000961422 BBP_MON_SC: No search help for 'Created By'
 |----- 0000962093 BBP_VENDOR_CREATE: Refresh BP data
 |----- 0000962252 BBP_GETLIST_INDEX_FILL: Incorrect processing statistics
 |----- 0000962474 Error after changing partner data
 |----- 0000964132 Approval Preview for Rejected Items: Wrong User's Inbox
 |----- 0000964361 Cannot find employee of vendor
 |----- 0000964455 Country for the PO box is initial
 |----- 0000964911 Kopieren von Alertkategorien: Containerelemente verschwinden
 |----- 0000966072 Download of material fails - set type COMM_PR_UNIT
 |----- 0000966323 Service Item: Not able to create PO in ERP backend
 |----- 0000967429 Approval buttons not updated after release
 |----- 0000967615 Performance of BBP_PD_PO_GETDETAIL may be poor
 |----- 0000968110 Transfer canceled, account assignment acc. to value/quantity
 |----- 0000968251 BBPSC02:In source of supply preferred vendor not validated
 |----- 0000969091 SRM does not support passwords longer than 8 characters
 |----- 0000982293 Ext requirements: Purchasing group data not transferred
 |----- 0000982448 Impossibility to delete an item in PO
 |----- 0000982674 Change PO quantity does not update account assign quantity
 |----- 0000983130 Search for back-end purchase orders using the requester name
 |----- 0000984184 BADI BBP_ALERTING active but its implementation isn't called
 |----- 0000985179 Delete button active for backend service entry sheets
 |----- 0000990264 Multiple confirmations cannot be posted for service & limit
 |----- 0000996104 No catalog when confirming back-end blanket purchase orders
 |----- 0001003408 BBPCF: Cannot Add Catalog Item to Confirmation for Limit PO
 0001010791 Flag Confirmation based Invoice Verification set erroneous
Kind regards,
Yann

Cover flow albums show songs from multiple albums

I love my iPod classic. the only issue I'm having is that when reviewing some albums via the coverflow feature, about 5 albums shows songs from multiple albums. they play correctly. It appears just the listing is messed up. I've tried deleting, adding the albums back to the library and resyncing, but it's still happening. Anybody seen this?

Try *One cover, too many tracks* below:
*HowTo: Grouping Tracks Into Albums*
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together or put the tracks in their normal order. The most useful order for editing the library is probably *Album by Artist*. If you're not already there, select the list view and click on the column heading for Artist until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
*Missing Artist or Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
For true compilations, where each track is by a different artist, the answer is to set the compilation flag to true and enable the iTunes preference to *Group compilations when browsing*. If the album is not a compilation however, any tracks which list guest artists may be treated as separate items. Filling in the Album Artist field is enough to link things in iTunes. Sadly, however, the iPod ignores the Album Artist field when grouping albums so this is only a partial solution. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate that this is information about the track as distinct from the song title and also use this style for Mix/Live/Bonus info.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*Tried that, there are STILL too many covers!*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading articles (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc album*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. BTW You can still give the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field.
tt2

How do I show what folders files are in in list view? MacGenius NO help.

I recently went to the Natick Mall Mac Store to see a MacGenuis. I had two issues. The first was whether it is possible to view what files my documents and photos are in in list view, as I used to be able to view on my PC. The MacGenius tried to sell me a one-on-one lesson. When I asked how a lesson would help if it was not a possiblity, he told me to right click each document or photo to get that information. That is exactly the cumbersome, time consuming an inefficient process I was trying to avoid. I asked if he was aware of any third party software that could provide that function, and he said no.
A little more research on my own shows that if you put your cursor on the item, the information shows up in the bar at the bottom of the finder screen. Not exactly what I was hoping for, but certainly more efficient and quicker than right clicking on each individual item, and I can at least toggle back and forth to compare documents and photos in multiple locations so I can delete those no longer needed without having to worry about doing an extra step and moving docs in and out of individual folders to re-consolidate them and delete uneccessary copies. (I have extras because I do legal work and have to keep copies of all items submitted in a single court filing together, but may need the same photos or docs in other court filings, which also have their own folders so I have a complete set of what was filed in each filing).
Shouldn't the MacGenius have known about this function as an option for finding folders? He also told me I could not back up my computer on a disk I had previously used for a back up because the new back up would wipe out everything previously backed up.
I also asked him about the whirling colored circle which I seem to be getting a lot of lately. He "checked" my computer and determined that I need a new battery (mine had slightly over 450 cycles, according to him) and my hard drive is failing. All could be repaired for a little over $300. I was told I could not do the repair myself, it had to be done by a Mac technician, and that the parts could only be purchased at the Mac store and they don't sell the parts except to Mac technicians.
I was dubious, only because the MacGenius was consistently unhelpful and consistently tried to sell me items. I did stop and look at some PCs, figuring if my Mac was on its way out I would back up my docs and photos to a new PC and save a ton of time and money because I could consolidate on the PC which would show what folders my docs and photos were in - and use the PC for a backup drive until the Mac dies.
I got Tech Tool Pro 6 and ran the diagnostics. All of which contradicted what the MacGenius told me, and gives me multiple options for backups without having to buy multiple backup drives for fear of having prior backups overwritten. So I don't need a new computer, I have an acceptable, altho less than desirable, way of telling what folders my items are in, and Tech Tool's optimization fixed the whirling "wait" cirle.
The only thing left is to ask if anyone has a hint or knows of software available that will in list (or other) view what folders my docs are in.
Except to ask, has anyone else experienced such disappointing help and annoying upsell from a MacGenius? In all fairness, the few times in the past that I have been helped by a MacGenius, they were extremely helpful and didn't try to sell me anything (altho my computer was new and still under warranty).

Customize the Finder window toolbar, adding the Path icon to it. Select an item and click on the Path icon or, as you already know, add path to the window. There's also copypath.app available via the App Store.

Opening a form with detail information

Hi all,
i have create a matrix contain all Draft is Open and i make double click event on row to view detail form.
If omatrix.IsRowSelected(i) = True Then
                            Dim Docnum As Integer = omatrix.Columns.Item(1).Cells.Item(pVal.Row).Specific.value
                            Dim Doctype As String = omatrix.Columns.Item(2).Cells.Item(pVal.Row).Specific.value
                            Select Case Doctype
                                Case "Sale Order"
                                    'open Sales order Form on Docnum with detail information
                                Case "Delivery"
                                    'open Delivery Form on Docnum with detail information
                            End Select
                        End If
+ please show me how to open exactly form which i want to open
+ how to format an column in matrix is currency.
+ how to make total in the end of column.
Sympathize for my English.
Thanks.

Hi
If you are using SAP Business One PL 19 or above you can try the following for opening a form
Dim formType As SAPbouiCOM.BoFormObjectEnum
            'default: fo_None
            Dim strUDOObjectType As String
            Dim strObjectKey As String
            'For UDO objects, set the system form enum to be "fo_UserDefinedObject" at first.
            formType = BoFormObjectEnum.fo_UserDefinedObject
            strUDOObjectType = "myUDO"
            'UDO type
            strObjectKey = "udoKey"
            'Code
            Dim oForm As SAPbouiCOM.Form = oApp.OpenForm(formType, strUDOObjectType, strObjectKey)
            'For system objects. set system form enum for "BusinessPartners" at first.
            formType = BoFormObjectEnum.fo_BusinessPartner
            strUDOObjectType = "testUDO"
            'Will be ignored in this case.
            strObjectKey = "C00001"
            'primary key of "BusinessPartners" object.
            oForm = oApp.OpenForm(formType, strUDOObjectType, strObjectKey)
            If oForm Is Nothing Then
                'No form opened with the input parameters, add your own logics here...
            Else
                'Form opened successfully, do your own work here...
            End If
Summary Column is available in 8.81 only
Hope this helps
Regards
Arun

New Blog: Detailed Information on the Fiscal Year Change (RAJAWE00)

I've published a new blog that includes detailed steps and other technical information on the Fiscal Year Change program in fixed assets.
[Detailed Information on Changing the Fiscal Year in FI-AA|Detailed Information on Changing the Fiscal Year in FI-AA]
A full list of FI-AA related blogs has been kept in the [Wiki|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erpfi/asset+accounting].

Dear Mark,
Where do you define this previous fiscal year??
No, we are not expected to run depreciation in 2007. The first depreciation run will happen in Jan-08
Additional information, when I am trying to close period via AJAB, the error says "The fiscal year 2007 is already closed for company code 1417. It is not necessary to perform a year-end closing". Surprisingly, it still showing 2007 as a current year.
Please help
Edited by: AMIT HINGER on Jan 4, 2008 2:21 PM

How to make one album show up for multiple artists?

I'd like some albums to show up under multiple artists in iTunes in Windows. Say for example "The Basement Tapes" by Bob Dylan and The Band. It would be nice to see this album under both these artists. Or to have "Two Men With the Blues" show up under both Willie Nelson and Wynton Marsalis. Can I do that with iTues? If so I haven't figured out how. It would be nice if using a delimiter such as as comma, slash of semi-colon would signify to iTunes that it should lists those songs under all artists but it doesn't. At least commas didn't work. Any help would be appreciated.

iTunes doesn't have the ability to do what you want, i.e. to define multiple separated values in a field and then have the item show up when looking at a selection based on each of those values. "Bob Dylan", "The Band" and "Bob Dylan & The Band" are three distinct values that can't be linked together. Sort values can change where in a list things are displayed but shouldn't be used to attempt to merge different values as results are undefined and unpredictable.
tt2

Detail information showing up on multiple areas of a report

Similar Messages

Maybe you are looking for