Detail map not showing

Please help

Hi Chinnadurai R,
As you have recognized, the corresponding property is reflected in both places, DTN as well as in the WorksetMap iView. So there is no workaround just by configuration.
Anyhow, instead of the map iView, you could create your own small HTML document which links to the hidden navigation targets; then use a KM docs iView to show this instead of the map iView. That would be a quite static workaround, which of course would need modification as soon as there would be a change in the URL iViews (a modified one, an additional one, or one of them removed).
Another approach would be to develop you own generic solution which renders something like the standard map iView does, but including navTargets which are set to "invisible in navigation".
A third approach would be to decompile the standard map iView and to check if it would be easy to modify it just concerning this setting  ("invisible in navigation").
Hope it helps
Detlev

Similar Messages

  • Employee tax details are not showing up in Payslip...

    Hi Experts,
    in my project when we are  generating payslip Tax details are not showing up in that.I have checked with RT , the amount is correctly showing in RT.How can i resolve the problem.Please advice me.
    Regards,
    Sai.

    Hi Manoj,
    Thanks for the reply.How can check weather the wagetypes are added or not addeded in PE51.If not added what should i do?
    Thanks in advance.
    SAI

  • Ovi Map not showing railway lines on N8 (UK map)

    Hi
    I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
    They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
    Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
    Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
    Thanks.
    Regards, Brian.
    Solved!
    Go to Solution.

    What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image.  I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5
    Attachments:
    Scr000087.jpg ‏46 KB

  • Map not showing

    Map not showing  standard,hybrid and satellite only  only location drop pin is visible

    If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
    They can both be found from:
    http://europe.nokia.com/explore-services/maps/download
    with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
    Although i work for Nokia, my opinions are my own!
    Got a Maps query? Check our Maps FAQ's

  • How to refund to a buyer when paypal details does not show a refund link?

    How to refund to a buyer when paypal details does not show a refund link?

    Yeah, I understand, there is so much more to communication than words on paper.Folks interpret written words according to a whole lot of complicated emotions and feelings. We then project that onto the author and decide why we think they formed that particular combination of words.It is certainly far from perfect.What is missing is volume, intonation, body language, facial expressions, etc. Emoticons are a very big help.I am sorry that you interpreted my tone as abrupt. It was certainly not meant to be. I apologize if I have offended you in any way.I admit my lack of pc. I just did not see this as a social atmosphere, which it  really can be.I was just asking for information. I will try to do better in the future.

  • Tax details are not showing in Form 16 ..India payroll

    Hi Experts,
    I have done all configurations with respect to India Payroll.But im unable to see follwing details in form 16.
    A. Value of perquisites under section 17(2) are not showing in form 16.
    B. Less: Allowance to the extent exempt under section 10 ....are not showing  in     Form 16.
    C.Deductions under chapter 6A are not showing in form 16.
    D.Total income .Tax on total income ,surcharge ,Tax payable are also not  showing in form 16.
    Probably i might have missed some important steps while configuring.Please tell and advice me to resolve the problem.Thank you very much.
    Regards,
    Sai.

    Hi,
    Firstly, check in the RT cluster table for the employee if the folowing wagetypes aare fetching values.
    /416, /418, /130, /432.....few more for surcharge etc..but if the given wagetypes are fetching values, then other will also be caputured.
    Also, did u maintain Tax infotypes 586, 585, 582 etc..
    If yes, then problem can be with the confuguration of the wagetypes.
    Please check the above and let us know...
    Regards,
    Pranitha

  • My position in OVI map not showing my correct posi...

    I installed new version of OVI maps today.
    when I clicked on "my position" , it is not not showing my position correctly,
    why it is so? anybody has any experience?

    @gavin_street
    If Nokia Maps have not been used for a while stored ephemeris GPS data is out of date or similarly if application updated data can become corrupted. You don't mention whether you are hapy for Assisted GPS postioning method to utilise a network access point to contact positioning server = supl.nokia.com or whether relying solely upon the Integrated GPS of device. Try going outside away from tall buildings if feasible, launch Nokia Maps and wait 20 - 30 minutes for it to lock on to position.
    It might be an idea to download LeGPSData2 application from Nokia Store so you can keep track of number of satellites acquired:http://store.ovi.com/content/208256
    Happy to have helped forum with a Support Ratio = 42.5

  • Full picture photo shooting details does not show up

    Hi everyone,
    Normally when I shot a photo and in the photo viewing mode I can select "details" to see the full details of the captured photo such as shutter speed information. However, recently I found that the information does not show in full like in the past. The shutter speed an some other details are diappeared.
    How can I bring this back
    Methee
    Solved!
    Go to Solution.

    @alexdon thank you for your advice 
    I have tried it in safe mode but still the details of the captured photo does not show in full. I have attached a screenshot with this post which you can see that the details are very short. 
    Also, I have tried also a factory reset but it does not work at all. Possibly the PC Companion repairing that I did it last time might had some unknown error due to my home Internet connection was not stable. So, the PC companion repairing version of software might be permanently modified into the factory software. So the the factory reset does not work.
    Anyone has the same problem like me? or it is normal with the current Sony updated software. I am sure last 2 months ago when I bought Z3 it was not like this. And this is an annoying problem for me as I always use Z3 camera in manual mode and always make use of the first picture shooting details such as ISO, speed shutter, etc for re-shooting a second better photo. 
    Anyway, I will do a PC companion repairing again tomorrow morning, then I will post a result
    Below is the screenshot that  I shot a photo in safe mode using manual camera mode at 20.7 MP, auto ISO
    Then I openned the gallery in safe mode and see the details of the captured photo. You can see that there is almost no important details.
    There are only the width and height and then the flash is on or off.
    Thanks Alexdon
     And soory if my English is not good!
    Methee

  • MAP not showing perfect

    Dear SAP Guru,
    My MAP is not showing perfect(Seams to me).
    MAP = 8,270.59
    Total Stock = 10,823.288
    Total Value = 58,220,630.81
    Possible MAP =  Total Value(58,220,630.81) / Total Stock (10,823.288) =  5,379.20
    But when I am doing GI, its takes 5,379.20 .
    Will you please clear why it is showing the MAP = 8,270.59 and what are the possible reason.
    Thanks for your advance co-operations.
    Best Regards,
    Shoyeb
    Edited by: AMShoyeb on Feb 1, 2012 8:31 AM

    Hi,
    boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
    check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
    and analyze it you will get ans for same .
    also read following link you will get goo idea about it
    [MAP|Moving average price calculation logic of material with Price Control "S";
    Regards
    Kailas Ugale

  • New detail rows not showing

    Hi,
    Here's a little background on my problem. We have a simple master-detail hierarchy. Both have a ViewObject. The problem lies in the fact that our detail VO has a filter using a bind variable. The bind variable value is determined (most of the time) at the VO execution time: bindParametersForCollection is overriden and passes a value for the bind variable if it is null. In our specific case the variable represents the username of the authenticated user.
    The main complexity lies in the UI. We present all the masters and their children in a single table in edit mode. We are using a tree binding with an accessor from the master node to the child node.
    Example
    Row 1: Master 1 Column 1 | Master 1 Column 2 | Master 1 Detail 1 Column 1 | Master 1 Detail 1 Column 2
                                                 | Master 1 Detail 2 Column 1 | Master 1 Detail 2 Column 2
                                                 | Master 1 Detail 3 Column 1 | Master 1 Detail 3 Column 2
    Row 2: Master 2 Column 1 | Master 2 Column 2 | Master 2 Detail 1 Column 1 | Master 2 Detail 1 Column 2
                                                 | Master 2 Detail 2 Column 1 | Master 2 Detail 2 Column 2
                                                 | Master 2 Detail 3 Column 1 | Master 2 Detail 3 Column 2
    Row 3: Master 3 Column 1 | Master 3 Column 2 | Master 3 Detail 1 Column 1 | Master 3 Detail 1 Column 2
                                                 | Master 3 Detail 2 Column 1 | Master 3 Detail 2 Column 2
                                                 | Master 3 Detail 3 Column 1 | Master 3 Detail 3 Column 2Everything works until we try to create new rows. In our use case, whenever we create a new master row, we also create a fixed number of detail rows. The number of detail rows depends on the context. Whenever we do this, the details rows do not show up in the UI.
    In my experimentations, I found that the problem was caused by the bind variable on the detail VO. Tracing the detail VO query execution I came to the conclusion that unposted rows where rejected from the QueryCollection when there’s a bind variable. The debugger shows that in VO#executeQueryForCollection the QueryCollection#mUnpostedRows list is empty when there’s a bind variable while it is not when there’re no bind variable.
    This is a major issue in our case, so I would like to know if you consider this as a bug (in my opinion it is). If yes, when can we expect a fix or workaround? Otherwise we’ll have to get around this problem by either finding a way to remove the bind variable OR do everything manually in a managed bean (which I would prefer not to have to do).
    I have reproduced the problem in a SRDemo test case. Test case has been sent to Steve Muench.
    Thanx!
    Olivier

    This looks very similar to Bug# 6412612 "New Row Lost After Executequery In Vo W/ Bind Variable In Where Clause", reported in the Tech Preview #2 release, and fixed in Tech Preview #3 (due out before the end of December 2007). Will try confirming with an in-house TP3 build that this fix fixes your testcase, too.

  • Details Screen not showing up

    Hi All
    After I open a transaction on web ui, I see that  the transaction opportunity details screen is not showing up. Only the Assignment block name is there but no details screen. How to correct this.
    Please provide solutions asap
    Thanks
    TR

    I mean all the other Business role config like workcentres, groups, links, assignments, visibility etc. is fine.
    Yes I am using Z role and Z role config key.
    The issue is I guess one of my colleague made changes in the std role key rather than copying the std key to custom key. Later on to fix it played around and then this issue came up.
    Well, is there any way to reset the std key back to it's std configuration.

  • Base map not showing

    Hello
    I have installed OC4J it is running the demo maps given in tutorials.
    But it is not showing the base map.
    can u suggest me something

    Hi,
    boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
    check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
    and analyze it you will get ans for same .
    also read following link you will get goo idea about it
    [MAP|Moving average price calculation logic of material with Price Control "S";
    Regards
    Kailas Ugale

  • Ios 6 map not showing directions?

    I using a iPhone 4 downloaded latest iOS in my phone but its not showing directions in map app please fix this.

    If you mean that apple maps doesn't work very well in Saudi Arabia then you may find some answers here:
    https://discussions.apple.com/thread/4311003?start=0&tstart=0
    Sadly it doesn't give you the answer you might want but many hope that google maps will release an app soon

  • Map not showing in places

    I'm using iphoto 09, and suddenly, no maps are showing up in places.   In the get info section of a photo, the location name still shows up, but there are no maps, no pins for the maps, etc.  Anyone have any idea?  The map area just shows up blank.
    Thanks

    Hi, I’ve found a similar topic with some advice. However, none of them has solved my problem with iPhoto ’09. My brother hasn’t got such problem in iPhoto ’11 on his Mac but I’ll wait for WWDC news before I decide to upgrade to ’11. Maybe our problem is related to the new stuff which is probably being tested now?

  • Color Map not showing time-dependent change

    I am using the latest Sound and Vibration Measurement Suite in Signal Express.  I have a Spectral Map step in my program, which includes a Color Map.  I am recording an accelerometer's transient response to an impact, and want to see the time-dependent frequency intensity changes as a function of time, so a color map should be perfect.  I have no problem recording the accelerometer's transient response in a time graph, and I also see the power spectrum in another graph.  While the color map indeed shows various frequencies at different intensity levels, I don't see the intensity of any of the frequencies change over the course of the 200 ms that I'm recording, while the time graph clearly shows the decaying waveform.  Why doesn't the color map show a decrease in intensity of the respective frequencies as time progresses through the transient?  I have everything set up to display and record the first 200 ms of the impact.  At the end of this period, the intensity should go to almost zero.
    Please see the attached .seproj file to review the parameters I have set.
    Also, with the same .seproj file, I will occassionally get a Buffer Overflow error.  From this file, can you tell me what setting I need to change.  But I need to make sure that all data both displayed and recorded, is for the 200 ms timeframe specified (10 ms before the trigger and 190 ms after).  The ADC I'm using is an NI 9234 in a cDAQ-9172 chassis.
    Thanks,
    --Tim
    Attachments:
    golfclub_200ms_test.seproj ‏258 KB
    Log files.zip ‏200 KB

    Tim,
    I am trying to figure out where this would be able to recognize the changes since the data would be taken from an analysis of one .2 second signal. Have you tried to analyze more than the one signal taken in? When I ran this project I got the display on the bottom right to show one signal as having been read which makes sense when looking at the data. If you wanted to see the changes over the 200 ms timeframe I would have it run continuous DAQmx acquires for that timeframe. It appears the analysis that we see stays static because it is doing analysis of only one data set that came in. I would think that the change in time that you want to see would have to have analysis done on multiple sample sets to notice the differences from one set to the next. 
    Frank,
    National Instruments
    Staff Software Project Engineer

Maybe you are looking for