Detail seen different in Develop view and Loupe view
I recently took some aurora pictures, and was adjusting them to put in a slideshow, and noticed something peculiar, i.e., that the details seen in the Develop module are less than those seen in the Loupe view in the Library. This is true in several pictures. The Develop view (2nd picture) is smoother and shows fewer of the fainter stars than the Loupe view (first picture). I hope it shows in the pictures below, which I created by using the Snipping Tool in Windows.
Why is this the case?
The problem is that the Slideshow results in LR seem to be closer to the Loupe view than the Develop view.
The Exif information is as follows:
and the adjustments I made were:
and
I'm using the LR 2014 v 8.7.1, Camera Raw 8.7.1.
TIA.
Hi Michael:
You're right. When I magnified the view to 100%, the results in the two modules were identical, as you said.
It does, however, raise a practical difficulty for me. With these kinds of long exposure, high ISO pictures, if I zoom in to 1:1, I find it extremely difficult to make any adjustments because the noise is so high. I would basically set all the noise sliders to max, and the details to minimum. However, this results in overadjusting for noise and losing too much detail when the picture is viewed zoomed out to fit on a computer monitor as a slideshow. Usually, this is not a problem, but at the high ISO/long exposures of these pictures, I find it very difficult to work in the develop module at 1:1.
Similar Messages
-
Diff bt Help view and Maintanence view
hi gem's
i need the diff bt Help view and Maintanence view with example...............Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji -
Difference among the Help view,Database view and Maintanance View
hi,
can Anyone pls let me know the Difference among the Help view,Database view and Maintanance View
thanks®ards
ramaThe followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
Hope this is helpful, Do reward -
Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW
I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.
Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.
-
General ledger view and entry view
Can any one help me in understanding the difference between GL(general ledger) view and entry view?
Hi,
While entry view shows the Customer/ Vendor and other revenue/ Expence GLs
General ledger view shows the Reconciallation GL and revenue/ Expence GLs. We cannot find Customer and Vendor details here.
Hope your question is answered.
Regards,
Sharan -
Aperture stopped showing pictures in viewer and split view
Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718 -
COOIS: Material number in Component view and Operation view
Hi,
In COOIS report, Material number is required in Component view and Operation view.
How can we do this.
Regards,
somiraghuDear,
Under List-Operations we dont have the material number in standard layout
Alternatively you can check for list-Object Overview report,which will give a overall report which includes -header details,operation details,component details.you can change the layout as per your requirement
Material number is there any standard transaction for that.
need to create customised for that, see below table's
AUFK, AFKO, AFPO, AFRU, AFVV, AFVC
Regards,
R.Brahmankar -
What r the trns code for maintenance view, help view and projection view
hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari<b>What is the Different Types and Usage of Views
The followings are different types of views:</b>
- <b>Database View (SE11)</b>
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- <b>Help View ( SE54)</b>
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
-<b> Projection View (SE11)</b>
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
<b>- Maintenance View ( SE54 )</b>
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish -
What is the difference between view and materialized views
Hi
What is the difference between view and materialized view ? can we update the base table using viewscan we update the base table using viewsYes:
VIEWS
1. an updatable view is one that lets you perform DML on the underlying table
(see Oracle Database Concepts 10g - 5 Schema Objects)
2. non-updatable view requires INSTEAD OF Triggers
(see Oracle Database Concepts 10g - 22 Triggers)
SNAPSHOTS
You can have updateable (and writeable) snapshots - in updateable (writeable) MV replication.
Oracle uses snapshots (Materialized Views - MV) for two different purposes:
1. replication
2. automated Query Rewrite facility (first introduced in Oracle Discoverer, later included in Oracle database 8i).
Replication types in Oracle are:
a) Basic replication (MV replication)
- transaction based
- row-level
- asynchronous from master table to MV (Materialized View)
- DML replication only
- database 7 / 8.0 / 8i / 9i / 10g
- Standard and Enterprise Edition
1. Read-only MV replication
2. Updateable MV replication:
2.1 asynchronous from MV to master
2.2 synchronous from MV to master
3. Writeable MV replication
b) Multimaster replication
- transaction based
- row-level or procedural
- asynchronous or synchronous
- DML and DDL replication
- database 7 / 8.0 / 8i / 9i / 10g
- Enterprise Edition only
1. row-level asynchronous replication
2. row-level synchronous replication
3. procedural asynchronous replication
4. procedural synchronous replication
c) Streams replication
- (redo) log based
- row-level
- asynchronous
- DML and DDL replication
- database 9i / 10g (10g has Down Streams Capture)
- Enterprise Edition only (Standard Edition 10g can execute Apply process)
Regards,
Zlatko Sirotic -
What is the diffrence between SAP View and CAD View ?
What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
RajHello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K -
Difference Between G/L View and Entry View in New G/L Accounting
Hi,
Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.Hi,
Entry view is the view to show how you have done data entry while posting a transaction and general ledger View is the document splitting view, where system will show you the split posting which system creates on its own.
Example given by Alex above is general ledger View, ie: how system would split the line items based on base item categories.
Regards,
SAPFICO -
Differences Between Entry View and GL View - Doc. Splitting
Hello Experts,
I need some help about an issue occuring in our Client right now, differences in Entry view and GL View. Any help will be appreciated.
- Debit or Credit Balance posting of an account does not match with the balance posted in GL View, generally the GL view posts an amount above of the Entry view, and then it cause the Debit/Credit balance does not match with the movement in Entry View. Example Below from Quality System:
Debit Balance in January 2013: 319.794.641,38
Movement from FAGLL03 - OK.
Movement from FBL3N - Entry View Difference: 319.794.619,86 - 319.794,641,38 = 21,52 Debit
Checking NEW-GL Movement, we found the posting difference:
The Document Entry View: 5.465,22 Credit From Bank Account
The GL View - SAP Credited 5.486,74 Bank Account PC 1411 and Cr Bank Account PC 1444.
Total: -5.486,74 + 21,52 = 5.465,22 OK on Balance, but not OK from movement considering the Entry view.
- Questions:
- I understood the calculations, it was calculated as mentioned in note 1072850_Field overflow or very large amounts due to doc splitting
- Is this supposed to happen by SAP Doc.Splitting perspective?
- I am facing this issue because we need to send to the government account balances and their movements, and according to laws we need to pay additional amount for addtional lines generated, so it was better to send the information based in Entry View, not in GL View.
- FS10N Show warning message "New general Ledger Implemented, use FAGLB03", and when i execute the transaction the balance showed was the balance from FAGLB03.
- SAP 605 APPL.
Regards,
Leandro.Hi ,
Can you Please look at OSS note
1655571 - Multiple values and multiple/additional line items appearing in the NewGL View when compared to Entry View
Many Thanks -
Differences between view and materialized view
Hello,
Please tell me the Differences between view and materialized view in oracle 9i.
Thanks and regards
MadhuriHow can I create index in a view?
Please read reply of Justin Sir.
Regards
Girish Sharma -
How can the info block be assigned with the view and assign view to users.
Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
AshimaHi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB). -
How to create Maintaince View and Help View
Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
KumarFOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.
Maybe you are looking for
-
Moving answers in a quiz once they have been matched to a target in using drag and drop
Hi, I am having a problem with some of my drag and drop quizzes that I'm wondering if anyone you might be able to help me with? In some drag and drop quizzes I have created, using the Infosemantics drag and drop light widget in Captivate 5.5, I can m
-
My Report S_ALR_87012272???
Hello experts, I have created a new report and new form and linked them together (using FSI1 FSI4 etc..). Again I can execute my report correctly using FSI0. my problem is that when I run S_ALR_87012272 it is directly mapped to report 0SAPRATIO-03. h
-
Bug in rendering HTML content Apex 2.2 (in Apex 2.0 was OK)
We have many PLSQL processes which are called through boolean function which return some message as well as the result. <br> function some_func (pid IN NUMBER,err_msg OUT NOCOPY VARCHAR2) RETURN BOOLEAN;<br> and at the end function looks like: <br>
-
ITunes is us version how do I change it ti uk
When I click on iTunes app it connects me to us store, how do I change it to uk version.
-
Can't get shuffle to update says files being used
i cant update says files being used by other application,i just bought this there is no other application being used.im about to return it