Detail system landscape for SAP APO

Hi All,
Can u pls tell me the system landscape for APO with pictures. (i.e data flow in between ECC to APO through CIF also between APO submodules)
purpose: need to prepare PPT.
Thanks.

Hi
Find the link WRT system integration
System Infrastructure (SAP Library - Integration of SAP APO and SAP R/3)
pls follow below thread for more info
Integration multiple R/3 systems with APO via CIF
Raja kiran

Similar Messages

Whr should maintained a business system group in SAP APO

hi gurus,
where should i maintain business system group in SAP APO
can u explain me, what is the process, how it will work, why need BSG in APO
prasad

Hi,
We maintain Business System Group in APO IMG.
IMG >> SCM Basis >>Integration >> Basic Settings for Creating the System Landscape >> Maintai n Business System Group
In this IMG activity, we determine the assignment to a business system group of this system and the ERP systems that are to be connected. By doing this, you create areas with the same naming conventions. These guarantee that the same names are used for master data and also their synchronization in distributed system landscapes.
In addition to the ERP systems, this system too must be assigned to a business system group (BSG) as an independent logical system.
Proedure :
u2022     Choose New Entries.
u2022     On the New Entries: Overview screen, specify the following information for the business system group:
             o     An alphanumerical key (maximum of 10 characters).
             o     A description of your choice
u2022     Save your entries.
Example :
An SCM System is to be connected with the two ERP systems A and B in which two different materials (for example a hammer and a screw), have the same material number (100). The two materials are to be represented as two different products in the SCM system.
Assign The two ERP systems to different BSGs. Assign the SCM system to one of the two BSGs.
u2022     ERP system A (material number 100 = hammer) -> BSG A
u2022     ERP system A (material number 100 = screw) -> BSG B
u2022     SCM system -> BSG A
Hope this gives you insight.
Regards
Datta

System Landscape for ESS/MSS

Hi Experts,
I am on ERP2004, EP 6.0 SP20. I am trying to create a system landscape for the ESS/MSS Applications. ALways the connection test fails. This is the landscape I am trying to create:
1. One SAP Dedicated Application Server: for SAP_WebDynpro_XSS
 Connector Details:
Application Host: <host>.<company.com>
SAP CLient: 010
SAP System Number: 00
Server Port: 3200 (Using Dedicated Application Server)
WAS Details:
 Host: <hostname>.<company.com>:50000
 Path: /webdynpro/dispatcher/
 System Alias: SAP_WebDynpro_XSS
System Aliases:
SAP_WebDynpro_XSS.
SAP_ITS_XSS
SAP_ITS_EBU
User Management;
Logon Method: SAPLOGONTICKET
User Mapping Type: admin,user.
When I am testing the
Connector Details:
I am getting the following errors:
1. Retrieval of default alias successful
2. Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
WAS Connection Tests:
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<J2EE Engine Host>.<company.com>:50000)
5. The host name <J2EE Engine Host>.<company.com> was resolved successfully.
6. The server <J2EE Engine Host>.<company.com>:50000 could not be pinged successfully.
SSO is not set up yet. I do not understand why the details of J2EE Engine under WAS details in a system type : SAP Dedicated Application Server? Please help me. I am missing something.
I appreciate your help.
Regards,

Single Sign On set up and every application is working on portal.
But the ping always fails.
I do not understand one more thing from help.sap.com on System Landscape for ESS.
Documentation says:
Set up your system landscape. To do this, set up the following systems:
what kind of system this is: SAP_R3 or SAP_BW/SAP_CRM. In standard portal system template, there is no system like "J2EE engine".

What is the Three System Landscape in SAP

Hi All,
Please explain me What is the Three system Landscape in SAP.
Thank you very much,
Kavya.

1. Database Layer
The database layer consists of a central database system containing all of the data in the R/3 System. The database system has two components - the database management system (DBMS), and the databse itself. SAP does not manufacture its own database. Instead, the R/3 System supports the following database systems from other suppliers: ADABAS D, DB2/400 (on AS/400), DB2/Common Server, DB2/MVS,INFORMIX, Microsoft SQL Server, ORACLE, and
ORACLE Parallel Server. The database does not only contain the master data and transaction data from your business applications, all data for the entire R/3 System is stored there. For example, the database contains the control and Customizing data that determine how your R/3 System runs. It also contains the program code for your applications. Applications consist of program code, screen
definitions, menus, function modules, and various other components. These are stored in a special section of the database called the R/3 Repository, and are accordingly called Repository objects. You work with them in the ABAP Workbench.
2. Application Layer
The application layer consists of one or more application servers and a message server. Each application server contains a set of services used to run the R/3 System. Theoretically, you only need one application server to run an R/3 System. In practice, the services are distributed across more than one application server. This means that not all application servers will provide the full range of services. The message server is responsible for communication between the application servers. It passes requests from one application server to another within the system. It also contains information about application server groups and the current load balancing within them. It uses this information to choose an appropriate server when a user logs onto the system.
3. Presentation Layer
The presentation layer contains the software components that make up the SAPgui (graphical user interface). This layer is the interface between the R/3 System and its users. The R/3 System uses the SAPgui to provide an intuitive graphical user interface for entering and displaying data. The presentation layer sends the users input to the application server, and receives data for display from it. While a SAPgui component is running, it remains linked to a users terminal
session in the R/3 System.
REWARD POINTS IF HELPFUL
Message was edited by:
vijay kamath

System landscape for DMS Repository in KM

Hi All,
When I create a System Landscape for DMS Repository in KM which sytem template I should choose?Should I choose
'SAP system using dedicated application server' or anything else?

The problem is resolved.

3 System Landscape for NW2004s BI?

Hi All,
Given the scope of BI systems in NW2004s BI, what is the recommendation regarding 2 vs. 3 system landscape for BI?
With BW, it was (relatively) easy to maintain a Dev, QA and Production system. Now with Portal and Java components of BI, the hardware requirements for a third (QA) instance would make it harder to justify?
What experience have people had with 2 vs 3 system landscapes for BI in NW2004s? Has anyone come across an SAP recommendation or best practice for this?
Thanks,
Matt

Hi Matt,
The NW2004s set-up by default installs the EP and other portal components when you select the Java stack. So I guess your question was whether we can have 1 EP system and 3 BW system in the landscape. But from my experience the lanscape has remained the same i..e - 3 BI system and 3 Portals, the reason clearly being that in order to fully utilize the BI7.0 frontend you need a portal. Now using 1 portal would put lots of load on it as in BI 7.0 many components require portal - Integrated planning, web reports, Admin cockpit, etc.
Bye
Dinesh

PRD - System landscape for Enterprise learning solution

HI all,
I want to setup the system landscape for my production server.
I have 4 system. My Plan is
1st System - DB + Ecc6
2nd System - LSOFE
3rd System - EP
4th System - lsocp + KM flat file repository
By default the ECC6 comes with LSOFE.
My question is -- How to install LSOFE in separate host ?
Can i go with add-in java for EP for 3rd System ?
any pdf or link ....Kindly send to me.

My question is -- How to install LSOFE in separate host ?
As far as I know LSOFE is an add-on so you need a SAP system... only way will be to install a system in you other host.
Can i go with add-in java for EP for 3rd System ?
Why not... (I'll look into the future utilization of the portal and If its better off as a standalone Java installation)
Regards
Juan

Information on 3-System Landscape for XI

Hi All,
Currently we have DEV/QA XI as one system and Prod as another. We plan to seperate QA and have a 3 system landscape for XI... ie, DEV, TEST, PROD.
My Question is
> Any documents on what are the system requirements in doing so?
> Is there any advantage/disadvantage in doing this?
Pavan.

The sysetm configuration might be 2Gb+ Ram with good storage of Harddrive....there can be problem when you have both the dev and QA system on the same server or same instance with dfiferent client......
It;s better to have the Different system for DEV,QA and Production but as far as SLD is concerened standard says to maintain the single SLD but for production it will be good if kept seperate SLD.

System Landscape for ESS/MSS in EP60 SP2

I have installed EP60 SP2 on J2EE 6.20 and MSSQL. I have imported business packages ESS 50-4 and MSS 60-1-5. I have created the folder Systems in Portal Content and created a system SAP_R3 with aliases SAP_R3_HumanResources, SAP_R3_Cross, SAP_R3_Travel, and SAP_R3_Financials.
My 4.7 R/3 system is app server R3DEV02.domain.com, system id DEV, sysno 01, client 100. My ITS server is http://itsdev01.domain.com:71/scripts/wgate/webgui/! using client 100. My EP path is http://sapport01.domain.com:50000/irj/.
Given this information, can anyone tell me exactly what parameters I must set in the system landscape for system SAP_R3 and what the values should be for ESS and MSS to work properly? If I go to the System Landscape Cockpit, system SAP_R3 fails all tests.
Any and all help is certainly appreciated.

Hello Gary,
WRT SAP_R3 system landscape test failure, I ran into the same issue earlier, for a SAP_R3_Dedicated system. Keep the same setting values, but leave the system id (DEV) Blank, then test.
Your definition of (Application Server Host Address + System Number) should be sufficient for a SAP_R3_Dedicated connection.
I hope this will resolve your system TEST problem.
Regards,
AAAttar

System requirements for SAP Netweaver

Hi All
I would like to know the system requirements for SAP Netweaver installation on server.
Thanks in advance
Venkat

Hi Venkat,
Typically for EP it would be :
On Windows:
2 GR RAM,with 30-40GB HD,and with latest Windows SP`s and latest IE.
If the server is for Production incease the RAM accordingly.
For Portal RAM is very crucial,as SAPJ2EE Engine uses lot of RAM.
I hope this helps.
If yes,do award points.
Rgs
vikas

Prigramming Logic details for SAP APO Planning Models

Hi All,
I need to learn more about different model available in SAP APO - DP, SNP and their behaviour.
Request to please share any link or document associated with programming logic in different planning models available in APO.
Thanks in Advance.

Hi Senthil,
Thanks dear for your response.
What I am looking in programming details of exisiting DP forecasting models like Trend Analysis, Linear Regression.
What I know about MLR is that system uses below equation
Yi = bo + b1X1 + b2X2... + bn Xn
where Yi = Sales History
bo = Mean
b2 = co-efficients
x2 = causal factor etc.
Do you have document which details out how the figures are computed using these planning models?
Once again thanks for your quick reply brother.

Recommended Landscape for SAP

Hi Experts,
Is there a SAP recommended landscape when it comes to creating clients? For a example;
Development u2013 Client aaa u2013 ABAP & Config only. No master or transaction data in this client.
Client bbb u2013 Unit testing. Will include master & transaction data.
Quality u2013 Client ccc u2013 Only testing no changes for ABAP or Config
Production u2013 Client ddd u2013 Production client
Pls send me the links where I could locate the SAP recommended landscape, where Client details are included.
Thanks,
Sri

Hi Sri
Check these links -
http://it.toolbox.com/blogs/sap-library/understanding-the-sap-system-landscape-14030
http://www.scribd.com/doc/7468204/Best-Practice-SAP-System-Landscape-Copy#outer_page_2
Regards,
Sen

Setting Up the System Landscape for ESS

Hello Experts,
I am implementing ESS in portal.
I am in step of defining systems in portal for ESS/MSS.
Below is link I am following from help.sap.com
[Link|http://help.sap.com/erp2005_ehp_04/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm]
In above link it is mentioned that we have to define following systems :
SAP_WebDynpro_XSS
SAP_ECC_HumanResources
SAP_ECC_Travel
SAP_ITS_XSS
SAP_BSP_EREC
Additionaly according to below Article in SDN :
[Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?quicklink=index&overridelayout=true]
Following additional systems must be created :
SAP_ITS_EBU Looks similar to SAP_ITS_XSS above
SAP_R3_Financials
Now the basis person in my project has handed over to me following systems :
SAP_BSP_EREC
SAP_ITS_FND Name mismatch as FND is used in place of XSS or EBU
SAP_R3_Financials
SAP_WebDynpro_ESS Name mismatch as ESS is used in place of XSS
Now below two systems are altogether missing as per first link on help.sap.com
SAP_ECC_HumanResources
SAP_ECC_Travel
Please explain if it requires to be corrected or name mismatch and missing ststems would do.
Thanking you in anticipation.

All the above names that you are referring to are not necessarily separate systems.
These are system aliases for a system object created in your portal via System Administration - System landscape.
So, if you have HR and Finance on the same backend server, then you need only one system with the related system aliases.
You will need SAP_BSP_EREC only if you are planning on using E-recruitment.
Similarly, you will need SAP_ITS_XSS only if you are planning on using any ITS applications.
It is pretty straight forward to change/correct the names of your system aliases instead of changing the usage of these aliases every where else.
SAP_ECC_HumanResources is absolutely necessary.
SAP_ECC_Travel is required if you are planning on using travel and expense related applications.
Also, note that SAP_WebDynpro_XSS should be the alias of the system where your webdynpro applications are deployed (typically the same portal server)
- Shanti

Three-system landscape for Business Objects

Hello!
I'm new at Business Objects and I don't have imagination about it landscape. Do I need to make three-system landscape (D Q P) for BO with broadcasting to BI (D Q P) systems correspondingly? Or maybe I need make all customizing in one BO system? Could someone advice any documentation about lanscape for BO and BI?
Thank

Hi
Please refer this site for Business objects
http://help.sap.com/businessobject/product_guides/
Regards
Prashant

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

Detail system landscape for SAP APO

Similar Messages

Maybe you are looking for