Detailed documentation on architecure.

Where Can I get documentation on Rights Management Architecure? I am particularly keen about security keys are handled during RMS workflow.
In AD RMS I can find detailed documentation about various certificates used and flow of various keys during encryption and decryption cycle. Also details
of deployment in clusters.
I want to know where can I get similar kind of documentation on LiveCycle rights management.
Regards,
Sharang

Sharang
I'm not sure if this document ( http://help.adobe.com/en_US/livecycle/9.0/services.pdf ) is detailed enough (see page 42), but it does have some info regarding how documents are secured with Rights Management.
Regards
Steve

Similar Messages

  • Detailed Documentation on APIs in Oracle HRMS

    Hi,
    I'm interfacing data into Oracle HRMS. Once the data from the flat files is put into the Intermedeate tables, the API and Data pump need to be run.
    Could anybody tell me where I could find detailed documentation about
    1)the HRMS API's,
    2)the Data pump and
    3)which API handles which table's data?
    please put the link in this post or mail it into this account:
    [email protected]
    Thanks in Advance
    KP

    You can refer metalink site and use eTRM site for best information on APIs
    giridharan d
    [email protected]

  • IN IMG, I couldt see details documentations about particular area.

    hI
    when I m IN IMG, I couldt see details documentations about particular area.
    ex. when under Asset accounting goes for valuation and want to see document for valuation? I do click left side document Icon and nothing happen?
    could any one guide me how to activate this to view documentation?
    thanx in advance
    Bobby

    Hi Attila,
    there are demos available on the SAP Service Marketplace (http://service.sap.com/healthcare-tutorials) that will give you a good impression of the key capabilities of SAP for Healthcare.
    If you are particularly interested in the industry-specific solutions SAP Patient Management and SAP Ambulatory Care Management, the documentation is available in the SAP Help Portal (direct link: http://help.sap.com/saphelp_erp2005vp/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm)
    Best regards,
    Katharina

  • More detailed documentation of the data upload page set ?

    Hallo,
    Is there more detailed documentation available of the Upload Wizard and Data Set definitions?
    In particular:
    Is there a way to skip the Data Mapping part by providing a locally pre-recorded definition of the selected columns and their format, so this step can be skipped for the end user.
    The predefined regions: "Data / Table Mapping - Data Upload Column Mapping" is not very transparent.
    The bottom line is that I would like to skip this step completely, still leveraging the built in APEX capabilities.
    Regards,
    - Thomas
    Edited by: t-o-b on 17.04.2012 08:29

    Hi Thomas,
    The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
    The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
    Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
    Regards,
    Patrick

  • Detailed Documentation for Interactive Forms

    Hi,
       I need a detailed documentation about Interactive Forms and how to use the transaction sfp
    Thanks.
    Regards,
    Muhammad

    Hi,
    Did you check the Home page for Adobe products :
    https://www.sdn.sap.com/irj/sdn/adobe
    In particular, I would go to the SAP Help :
    http://help.sap.com/saphelp_nw04s/helpdata/en/cc/05c27f53ad430688f8a95f1c0c79db/frameset.htm
    Best regards,
    Guillaume

  • Detailed Documentation on Multi-providers

    Hi,
    Does anyone know where to fnd detailed documentation on Multi-providers ?
    If no documentation available, can anyone recommend a book that explains how multi-providers behave in different design situations ?
    Cheers

    Hi Achin,
    here is your document:
    www.service.sap.com/bw->SAP BW InfoIndex->MultiProviders->MultiProviders (incl. Slow Moving Item Scenario) 3.0B SP07 (Docu Enhancement) (pdf)
    following this link you can find also info about Multi-Cubes and Partitioning
    https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700008401002000E
    If you want some more info give me your e-mail address (cause I'm not finding these docs on line with a path..)
    Hope it helps (and please don't forget to assign some points by clickin'on the star to the contributors that helped you !!!)
    Bye,
    Roberto

  • Detailed documentation of statistic-events?

    Hi experts,
    I'm looking for a detailed documentation and explaination of the statistic-events that can be found in the BEx-statistic-workbook.
    Especially I'm interested in the event "Bytes transfered" which can be subdivided refering to the objects "RSR_NET_BUFFER", "RSR_NET_INTERFACE", "RSR_NET_RESULTSET_GET_S".
    Futheron I'd like to know what the events "Before/After Renderer", "Loading local WB", "serialize data" and "Not assigned" stand for. What happens in this steps?
    Thanks in advance,
    kind regards,
      Marco Simon

    Hi Thomas,
    The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
    The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
    Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
    Regards,
    Patrick

  • IDoc Detailed documentation

    Dear Friends,
    I need the detailed documentation on IDocs and ALE pertaining to SD module.

    Hi
    http://www.sapmaterial.com/idoc_sample.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d

  • Any more detailed documentation than Help?

    I suspect I know the answer, but . . .
    Being new to Automator, the Help documentation is good for the basics, but not details.
    For example, I wanted to Pause for 5 minutes. Tested with 10 seconds, got everything working, tried to change 10 seconds to 300 and got an error that says "Formatting Error." Huh? By experimenting, of course, I eventually figured out that 59 seconds is the maximum.
    Also, I can't find any explanation of Get... vs. Find... vs. Filter... actions. Figuring it out wasted a lot of time.
    Is this sort of thing documented anywhere? Or is trial and error the only way?

    There are a few resources out there, such as:
    http://automator.us/leopard/index.html
    http://www.apple.com/pro/techniques/automator/index.html
    The general idea is for an Automator action to be simple enough that the description is the documentation, although some fall a bit short.

  • Where can I find some detailed documentation?

    I need a little bit more documentation than this propaganda. Anything useful available to help a GUIphobic unix geek?

    Just to add to that, there is a section of Mac 101 Help for TM also.
    http://docs.info.apple.com/article.html?artnum=306681
    http://www.apple.com/support/leopard/timemachine/

  • Is there any detailed documentation available on the server parameter setti

    It would be great to have examples and more information on what the consequences are if parameters are set too high or too low.
    It would be great to have some real life examples that tell you what to consider when setting the lower memory threshold for the webi processing server, for example - or the maximum documents in cache.
    I have found the handbook and the sizing guide but nothing in particular for the parameter settings of the servers.
    Edited by: Nadine Stevens on Jul 22, 2009 10:48 AM

    Hello Nadine,
    you find it in the Admin Guide for your BO Version. Chapter "Server Command Lines".
    Regards
    -Seb.

  • BPEL Import of external created models - any detailed documentation?

    Hi,
    I want to import a BPEL into an Integration Process in XI that I have created with an external modellinbg program.
    And (think roundtrip) I want to export BPEL from XI and import it into an external modeller.
    Where to start? Can someone point me to something like a language reference, how SAP is handling BPEL? Or is it a 1:1 implementation with no SAP specifica?
    Any help is awarded
    ths
    holger

    <i>Is there a "SAP reference guide of BPEL implementation" ?</i>
    As far as i know, such a guide is not provided by SAP. And there should be a reason for that. SAP is moving towards open standards and as one of its initiatives, it has started using BPEL because it is an open standard based technique. Thats why BPEL developed in other applications are also supported in XI. e.g. ARIS
    For ARIS - SAP
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3c58e011-0b01-0010-1e88-b42e01bb961a
    Regards,
    Prateek

  • Detailed transaction process documentation?

    Hello,
    I am working currently on a project based on "Oracle NoSQL" as the head storage unit. I am a bit curious, how ONDB handles their transactions. I have scoured the attached documentation but without success. The only thing I could find were headlines or marketing sentences (like "Flexible ACID transactions, a la Berkley DB")
    Oracle NoSQL Database transactions
    Oracle NoSQL Database (Version: 12cR1.2.1.57 Enterprise Edition, 2014-01-10 06:21:46 UTC
    Oracle Berkeley DB Java Edition | Oracle Berkeley DB
    http://indico.cern.ch/getFile.py/access?resId=0&materialId=slides&confId=159716
    In the documentation of Berkley DB I have found a section claiming that BDB handles their transactions through JTA. Since ONDB is based on Berkley DB I've assumed that the transactions will be handled the same way. Please correct me if i am wrong.
    However, this is not the result I would like to hear. Are there any detailed documentation for the transaction processing?
    If anyone of you have an idea or a tip where I could find such a thing?
    greeting
    Sascha

    Hi Sascha,
    The short answer is that you can perform KVStore.execute operations:
    execute(List<Operation> operations) (see execute)
    Operations on records with the same major key, but different minor keys will be wrapped in an ACID transaction. All other single-record operations are in effect "auto-commit" transactions. You can perform CAS/RMW style operations using putIfVersion and deleteIfVersion.
    Charles

  • AC 10.0 - New Documentation in BPX

    Hi everyone,
    We have been publishing a lot of guides this year in our BPX website (http://www.sdn.sap.com/irj/bpx/grc), I would like to share with you some of the new highlights of the last month:
    New version of the PC+AC Integration guide
    AC and NetWeaver ID Mgmt Integration
    Segregation of Duties Review
    Also as per previous posts since last week there is a new guide covering the configuration settings in 10.0, currently it is hosted in the Service Marketplace but will be available soon in BPX as well.
    Regards,
    Luis

    Hi Luis,
    Great documentation. I would like to see some technical in detailed documentation as well, for eg: Configuring SPM to send password instead of a link (as raised in one of the posts).
    Regards,
    Raghu

  • SAP BW Environment - What documentation is needed to support it?

    I am currently working on an existing SAP BW system, but there is no documentation at all for it. We need to create appropriate documentation to enable easier understanding of the environment going forward.
    However, what type of detailed documentation would be needed to fully support an SAP BW environment.
    I assume we'd need to create the following types of documents...
    - Architecture Overview
    - Blueprint / Technical Spec
    - Query Spec
    - Authorisations & Security Document
    ...but have I missed anything??

    Hi Mark,
    It is also nice to maintain
    - Naming Standards
    - Landscape documnet
    - Enhancement Strategy
    - Reporting Strategy...
    hope it helps....
    Regards.

Maybe you are looking for

  • How to edit a stream captured live in jmf?

    hi everybody. i want to know how can i edit an audio stream that is being captured live from a microphone. i have looked at Cut.java from jmf solutions. it is taking a file to cut and then write the updated file to another file. when i have tried to

  • TM fails to launch

    To anyone whom can help me, My TM program is automatically backing up my files, it identifies & recognizes my internal hard drive but it fails to launch. When I go to "Enter Time Machine" it opens a window titled "Desktop" closes by itself and seems

  • Semantic Logging - RollingFlatFileSink - Real-Time Logging

    We're currently using semantic logging and are able to both save to rolling flat files and a sql database. A difference we're seeing is that the sql sink inserts every x seconds while the rolling flat file sink doesn't insert data until the file roll

  • Photosmart C6280 print hung in queue since new wifi network installed.

    I am running Windows 7 on my laptop. I just created a new wifi network and my Photosmart C6280 is attached via cable to the router. Now my print doc from my laptop goes wirelessly to the print queue but does not print. How can I make it begin to prin

  • Trouble with php process form

    Everything about my form works fine except for when you hit the submit button, it takes you to an error page instead of my "thanks for filling out the form" page. This is the link to the form: http://www.vintagebycrystal.com/Pages/form.htm This is my