Detailed Documentation on Multi-providers
Hi,
Does anyone know where to fnd detailed documentation on Multi-providers ?
If no documentation available, can anyone recommend a book that explains how multi-providers behave in different design situations ?
Cheers
Hi Achin,
here is your document:
www.service.sap.com/bw->SAP BW InfoIndex->MultiProviders->MultiProviders (incl. Slow Moving Item Scenario) 3.0B SP07 (Docu Enhancement) (pdf)
following this link you can find also info about Multi-Cubes and Partitioning
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700008401002000E
If you want some more info give me your e-mail address (cause I'm not finding these docs on line with a path..)
Hope it helps (and please don't forget to assign some points by clickin'on the star to the contributors that helped you !!!)
Bye,
Roberto
Similar Messages
-
Non-cumulative keyfigures in virutual multi providers in BI-7.
Is it possible to use non-cumulative keyfigures in virutual multi providers in BI-7? The Non-cumulative KFs are working in the cube. But when we create a virutual MP that contains this cube. They all are showing zero. Is this supported at all? Is there a note that we need to apply? Please help! This is BI-7.
Thanks.Hi,
Do not use more than one InfoCube with non-cumulative key figures in a MultiProvider since this may result in incorrect numbers in the query.
Refer to SAP Note 690475 on SAP Support Portal.
Refer
http://help.sap.com/saphelp_nw04s/helpdata/en/43/5617d903f03e2be10000000a1553f6/frameset.htm
Thanks,
JituK -
Detailed Documentation on APIs in Oracle HRMS
Hi,
I'm interfacing data into Oracle HRMS. Once the data from the flat files is put into the Intermedeate tables, the API and Data pump need to be run.
Could anybody tell me where I could find detailed documentation about
1)the HRMS API's,
2)the Data pump and
3)which API handles which table's data?
please put the link in this post or mail it into this account:
[email protected]
Thanks in Advance
KPYou can refer metalink site and use eTRM site for best information on APIs
giridharan d
[email protected] -
IN IMG, I couldt see details documentations about particular area.
hI
when I m IN IMG, I couldt see details documentations about particular area.
ex. when under Asset accounting goes for valuation and want to see document for valuation? I do click left side document Icon and nothing happen?
could any one guide me how to activate this to view documentation?
thanx in advance
BobbyHi Attila,
there are demos available on the SAP Service Marketplace (http://service.sap.com/healthcare-tutorials) that will give you a good impression of the key capabilities of SAP for Healthcare.
If you are particularly interested in the industry-specific solutions SAP Patient Management and SAP Ambulatory Care Management, the documentation is available in the SAP Help Portal (direct link: http://help.sap.com/saphelp_erp2005vp/helpdata/en/59/1c86353e13d558e10000009b38f889/frameset.htm)
Best regards,
Katharina -
More detailed documentation of the data upload page set ?
Hallo,
Is there more detailed documentation available of the Upload Wizard and Data Set definitions?
In particular:
Is there a way to skip the Data Mapping part by providing a locally pre-recorded definition of the selected columns and their format, so this step can be skipped for the end user.
The predefined regions: "Data / Table Mapping - Data Upload Column Mapping" is not very transparent.
The bottom line is that I would like to skip this step completely, still leveraging the built in APEX capabilities.
Regards,
- Thomas
Edited by: t-o-b on 17.04.2012 08:29Hi Thomas,
The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
Regards,
Patrick -
Detailed Documentation for Interactive Forms
Hi,
I need a detailed documentation about Interactive Forms and how to use the transaction sfp
Thanks.
Regards,
MuhammadHi,
Did you check the Home page for Adobe products :
https://www.sdn.sap.com/irj/sdn/adobe
In particular, I would go to the SAP Help :
http://help.sap.com/saphelp_nw04s/helpdata/en/cc/05c27f53ad430688f8a95f1c0c79db/frameset.htm
Best regards,
Guillaume -
Detailed documentation on architecure.
Where Can I get documentation on Rights Management Architecure? I am particularly keen about security keys are handled during RMS workflow.
In AD RMS I can find detailed documentation about various certificates used and flow of various keys during encryption and decryption cycle. Also details
of deployment in clusters.
I want to know where can I get similar kind of documentation on LiveCycle rights management.
Regards,
SharangSharang
I'm not sure if this document ( http://help.adobe.com/en_US/livecycle/9.0/services.pdf ) is detailed enough (see page 42), but it does have some info regarding how documents are secured with Rights Management.
Regards
Steve -
Detailed documentation of statistic-events?
Hi experts,
I'm looking for a detailed documentation and explaination of the statistic-events that can be found in the BEx-statistic-workbook.
Especially I'm interested in the event "Bytes transfered" which can be subdivided refering to the objects "RSR_NET_BUFFER", "RSR_NET_INTERFACE", "RSR_NET_RESULTSET_GET_S".
Futheron I'd like to know what the events "Before/After Renderer", "Loading local WB", "serialize data" and "Not assigned" stand for. What happens in this steps?
Thanks in advance,
kind regards,
Marco SimonHi Thomas,
The data upload was designed leaving the mapping step clear and accessible to the end user, in order to make sure, that the uploading of data does not end up by upload incorrect data.
The best way, I would advise you to match the column names of the files to be uploaded same as the column names of your table, that way the matching is done for you.
Otherwise, in case you are trying to skip the second step, you probably dont need the wizard, instead you can just write the code that read the file and upload directly to the table.
Regards,
Patrick -
Bex Report / Multi Providers
Hello to all experts and BW users,
I have question regarding advanced Bex reports. Is it possible to have one Bex report (Excel Workbook, with different sheets) using more than one multi providers or info cubes?
The reason for this question is simply that I would like to combine several KPI reports in one Summary KPI report for our MB. (Without creating a Master multi provider on top of the current multi providers)
Many thanks in advance friends!
BoykeHi Boyke,
Open a query in BEx and then click anywhere in the blank area of the Excel sheet(same or different) where you would like to add the other KPI report. Then select the Menu option as described below.
You can use the "Insert Query" option in the Tools button available in BEx to combine two or more queries in a single workbook.
When you select this option it will give you a list of all existing queries in the BW system select the one you wish to add.
Hope this helps.
Cheers
Anurag -
Dear Friends,
I need the detailed documentation on IDocs and ALE pertaining to SD module.Hi
http://www.sapmaterial.com/idoc_sample.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d -
Any more detailed documentation than Help?
I suspect I know the answer, but . . .
Being new to Automator, the Help documentation is good for the basics, but not details.
For example, I wanted to Pause for 5 minutes. Tested with 10 seconds, got everything working, tried to change 10 seconds to 300 and got an error that says "Formatting Error." Huh? By experimenting, of course, I eventually figured out that 59 seconds is the maximum.
Also, I can't find any explanation of Get... vs. Find... vs. Filter... actions. Figuring it out wasted a lot of time.
Is this sort of thing documented anywhere? Or is trial and error the only way?There are a few resources out there, such as:
http://automator.us/leopard/index.html
http://www.apple.com/pro/techniques/automator/index.html
The general idea is for an Automator action to be simple enough that the description is the documentation, although some fall a bit short. -
Creating recommendations by system in Multi providers
hi all,
While we are creating dimensions on mp? we have the options of creating recommendations by ourself nor to carry out by the system itself.
When shall we go for creating recommendations by ourselves and when shall we go for creating recommendations by the system.
Can anyone give examples when shd we go for system and when shd we opt for ourself.
regds
harithahi,
Mostly for MP "recommendations by ourselves" is suggested.
For Sap Defined we can go for System proposed.
Refer these links for more details:
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/content.htm
hope this helps,
partha -
How to Create Infoobjects,ODS,INFOCUBES & Multi Providers in BI7
Hi,
I want Step by step procedure to Create Infoobjects ,ODS,Infocubes & Mutiprovider in BI7.I Know the procedure for Creating these in BW3.5. So I want to Know the difference with ur Answers
Please help me Regarding this.
Asian Points*****
Thanks,
kiran.
Message was edited by:
kiran manyamThere is no change in creating info objects.
Cubes:
1. Right click the info area and chose create info cube.
2. Select the type of cube you wish to create and comnfirm your selections.
3. The next screen is where you actually define the cube.
4. Now you will notice the difference.
5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
7. Activate the cube.
Multi cube:
1. Right click the info area - chose create multi provider.
2. select the cubes , DSOs, info objects that you need for the multi provider.
3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
4. Identify the chars and key figs.
5. Acvitate the mullti provider.
Ravi Thothadri
Ravi Thothadri -
Where can I find some detailed documentation?
I need a little bit more documentation than this propaganda. Anything useful available to help a GUIphobic unix geek?
Just to add to that, there is a section of Mac 101 Help for TM also.
http://docs.info.apple.com/article.html?artnum=306681
http://www.apple.com/support/leopard/timemachine/ -
Error when adding Non-Cumulative InfoCube to a Multi-Providers
I want to include an InfoCube using non-cumulative key figures (0IC_C03) to a MultiProvider that includes other basic cubes. Is this possible? I thought I read that you could include one non-cumulative cube in a MultiProvider. When I added 0IC_C03 to the MultiProvider I get the following error when activating: "Define the characteristics of the validity table for non-cumulatives." The validity table is defined for 0IC_C03, do I need to do anything special in the multiprovider? Any ideas on what I need to do?
Thanks,
Chris
Edited by: Chris Robertson on Nov 18, 2008 4:52 PMHi Chris,
I am having the same issue. Did you manage to fix this?
Thanks,
Milind
Maybe you are looking for
-
Windows 2008 r2 SP1 installation failed with unspecified error 0x80004005 - E_FAIL
Hi Team, We have SQL data base server with Win 2008 r2 OS.When trying install Sp1 it fails after reboot with unspecified error -0x80004005 - E_FAIL. Server having snap drive connected with 6 SQL data bases. Sp1 installation running 7 hrs and falling
-
Using ID constraints in XML Schema
I've been testing out a schema containing a number of key/keyref constraints for validation with the DOM parser and I've been having problems. Specifically, when I've used predicates as in: blocklist/block[1], blocklist/block[position()=1] or blockli
-
How do you change the Screen Resolution?
I can not figure out how to change the resolution on my screen. Everything is much smaller than what i would like and would like to enlarge everything. There is a simple way of doing this with a PC but i have not been able to figure it out on a macbo
-
Kular formatting ase file problems into Illustrator.
-
Can't open large layered pdf files. Not enough memory
I have a large 300 M layered pdf file that when I attempt to open eventually pops up the "not enough memory (RAM) message. I am on a windows XP Power Spec computer with 1.97 GB RAM I have allocated 1106 MB for memory useage, 12 history states and 8 c