Detailed list of subscriptions of folders

hello all!
is there a possibility to create a list in portal 6.0 sp2 with details for the subscriptions for folders - without programming?
e.g. <foldername> <subscription-receipient> <channel> <depth>
thank you!
matthias

Matthias,
In EP 6.0 SP2 is not possible. You have to develop it.
Patricio.

Similar Messages

BPM - Alert Inbox - Detail List - Single Sign on

Hi
I have some issues with single signon and the detail list in the alert inbox.
When I click the details list, it should open the list on the managed system, but for some reason it only takes me to the login screen of the managed system. I would like to get straight into the list in the managed system, since trusted RFC and SSO has allready been setup.
I have seen it working with the SSO.
Has anyone experienced this and/or know of a Solution? Maybe just a hint into what could be missing.
Kindly Regards

hi,
sso configuration taken over by solman_setup.
hence make sure managed system configuration -> step 'single sign on setup' successfully completed or not.
Thanks
Jansi

To rename a page or folder In either the Folder List panel or the Folders view of the site, right-click the file or folder, and then click Rename. Type the new name.

I set out to change the page name ready to publish on my hosts server after Having used a temp. name, simple so the " Expression web user guide says" I have not been able to find the "Folder List panel" of The folders view of the site,
I have just completed an hour methodically searching for the two files listed, I would be most grateful for some simple instructions on how to find the entities listed in the Title above, which I cut and pasted to make sure that I got it right.
Regards,
Robert
Robert 1000

If you are in the standard configuration, click "Site|Open Site," then browse to and open your site. With an open site, you will see a tab at the top labeled "Site View." Another tab at the bottom will be labeled "Folders,"
because you are then in Folders view of the site (recognize that terminology?). At the same time, unless you have your panels hidden, in the upper left side you will see a panel labeled "Folders List." If you do not see this panel, click "Panels|Reset
Current Workspace."
cheers,
scott
Please remember to "Mark as Answer" the responses that resolved your issue. It is common courtesy to recognize those who have helped you, and it also makes it easier for visitors to find the resolution later.

Does IP block list Providers protect Public Folders

Hi,
Just a quick question about IP Block List Providers in exchange 2010.
We have Spamhaus setup in the list, we just moved one of our customers over to DNS based mail and they have since been receiving a great deal of spam.
Does IP block list Providers protect Public Folders
with when email is enabled on the folder?
thanks,
Fulton
Have a good day.

Hi, Fultz.
I am not sure if you are using ForeFront (FF) but if you are, you need to configure FF to add the public folders as a scan target for real-time scanning.
http://technet.microsoft.com/en-us/library/cc483020.aspx
Alternately, it seems like a lot of folks use the GFI Mail Essentials for scanning public folders as well.
If these answers are no good to you, that's cool. I recommend that you this question on the Exchange forum, located here:
http://social.technet.microsoft.com/Forums/exchange/en-US/home
Good luck!
Best wishes, Davin Mickelson

Detailed list per profit center in FAGL_FC_VAL

Hi,
we are on ECC6 and have a question relating to foreign currency revaluation.
If we run transaction FAGL_FC_VAL the list that is returned shows the document lines, their historic rate, revaluation rate and the amount to be posted. However, this list does not take into account the correct profit center split.
The posting on the other hand does.
How can we get a detailed list that ties the posted amounts per profit center back to the original documents? Or can we get the first list to show us the ledger view rather than the entry view of the documents being revaluated?
Any help is appreciated!
Best regards
Sven

Hi Sachin,
the question is in fact how can we tie back the postings to the original documents:
e.g. I have 1 custumer invoice. Document number 1 which through document split has received 2 profit centers.
On the first screen 1 get 1 line:
                                            original FX rate          reval FX rate
document 1 : 100 USD        ,75          75 EUR       ,80     80 EUR       5 EUR exchange rate difference to be posted
If I click on the postings button I see :
debit FX differences    3 EUR profit center 1
credit FX gain               3 EUR profit center 1
debit FX differences    2 EUR profit center 2
credit FX gain               2 EUR profit center 2
We are searching for a list that replaces the first list and looks like:
                                                                     original FX rate          reval FX rate
document 1 : profit center 1 60 USD        ,75          45 EUR       ,80     48 EUR       3 EUR exchange rate difference to be posted
document 1 : profit center 2 40 USD        ,75          30 EUR       ,80     32 EUR       2 EUR exchange rate difference to be posted
Thanks in advance for your answer.
Best regards
Sven

MB51 - report layout and detail list

We are running jobs with MB51 with a specific layout. when the report displays, we click the detail box to convert it to a one line report.
Is it possible t execute MB51 and have the detail list display - so this could be run in the background and the one line list display would be the spool file.
OR - Can I create a one line report with MAterial number oand vendor on each line with quantities, values etc.
thanks
Althea

I finally had a chance to look into this -
All report layouts are using a "header" line and a "Position" line
It is this Header and Position that are making it "not useful" as a download file at this level. As I said - if I click "details" - I get the report I'd really like to see for back ground process spool file or export file.
Any ideas how to create a report layout without the header and position line? or just no header line would work. When I try modifying an existing report - Material and Plant are always on the header line and not available on the position line.
Any and all help will be rewarded - thank you

PowerView Drill down to details list

Great to have PowerView discussion forum. :) Would it be possible to drill the PowerView dashbord to the details list like SSRS sub-reports.
For example: PowerView dashboard that display Yr, make, model car types, and would like to drill to details list by the type use choose from graph.
PowerView graph -> PowerPivot pivot table -> PowerPivot details list ( all on the SharePoint ) .

Note: If you want to create an item that allows you to specify a Destination URI, you should specify the URI syntax as: <protocol>://<machine>:<port>/... For example, http://www.abcompany.com/home/page1.htm.
If you want to call an Oracle Applications function, specify the function name for the Destination Function property. For example, to call the PL/SQL General Preferences page from an item, you would enter the following value for the Destination Function property: ICX_USER_PREFERENCES.
Thanks
--Anil
http://oracleanil.blogspot.com/

Authorization object to import mb51 detail list to excel

Dear all,
What is authorization object to import mb51 detail list to excel ?
Able to see report material document list,but export to local file is greyed out ?
Jeyakanthan

Hi,
you can export ALV using menu option List -> Export -> Local file. Icon with green arrow which is usually used for download functionality in ALV has a different meaning in MB51. I know it's confusing. It's used to get full MM documents from archive. It's active only if you set option Short Documents in the section Data Source.
Cheers

Pcmanfm wont transfer files in detailed list view

I use pcmanfm and it wont transfer files in Detailed list view but will in icon view just fine (drag and drop).
Is there a reason for this? I have uninstalled and reinstalled and not sure what else to do.
Any help will be greatly appreciated
Last edited by dustykhan (2013-01-08 12:08:30)

https://bugs.archlinux.org/task/32369
Please Google before you seek help.

Multiple icons/images in detailed List view?

How can I view multiple icons in the detailed list view?
Forte rel 3.0.F.2
Nikola Filipovic, DMC Inc
@ Nesbitt Burns Inc
Tel. 416.359.7447

https://bugs.archlinux.org/task/32369
Please Google before you seek help.

Initial snapshot not ready, can I list these subscriptions?

Hi,
I am creating a procedure that monitors my replication subscriptions and sends out emails if something is wrong. We have ~150 (transactional replication) subscriptions so manual monitoring is a pain.
I found a useful procedure that helps, sp_replmonitorhelpsubscription. My problem is that I can't filter out subscriptions with the following status: "The initial snapshot for publication
'xxx' is not yet available."
Any way I can list these subscriptions with sql or some nice procedures?
br/Agust

I query msrepl_errors and msdistribution_history for my statuses. This way I can filter out transient error messages - like network errors, and then detect if a subscriber has not sync'd within a certain time period.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Report program with detail list and GUI status.

Hi,
I am working on type 1 program (report) and want to use detail lists.
I want to use a GUI status and want to use AT LINE-SELECTION. But AT LINE-SELECTION does not work when I use a GUI status.
How do I achieve this?
Thanks.

Hi
In the secondary windows, it is not possible to have GUI Status.
If you need like that, you should go for ALV Reports.
Here, You can have GUI Status only in the selection-screen as below..
REPORT zak014 LINE-SIZE 60 LINE-COUNT 20(2).
TABLES: sscrfields.
* Appliction Tool Bar Elements
SELECTION-SCREEN FUNCTION KEY 1.
SELECTION-SCREEN FUNCTION KEY 2.
* Selection Screen
PARAMETERS: matnr TYPE matnr.
INITIALIZATION.
sscrfields-functxt_01 = 'TEST1'.
sscrfields-functxt_02 = 'TEST2'.
START-OF-SELECTION.
WRITE:/20 'CLICK HERE TO NAVIGATE'.
AT LINE-SELECTION.
WINDOW STARTING AT 5 5
         ENDING   AT 50 18.
CASE sy-lsind.
    WHEN 1.
      WRITE:/ 'This is First window'.
    WHEN 2.
      WRITE:/ 'This is second'.
ENDCASE.
TOP-OF-PAGE.
WRITE:/5 'LINE SELECTION'.

Detailed list of daily monitoring activities in Basis

Hello Experts,
I need a detailed list of daily activities and transactions that are to be monitored in SAP BASIS as system administrator. Iam looking out for such a document since long but could not find one . I need the activities and transactions list along with details of analysis that if something goes wrong or something is missing while performing any activity / transaction ,how to check that and how to rectify that along with descriptions of technical terms used for analysis in the transaction or during performing an activity.
I hope ppl must hv prepared such a detailed analysis list for monitoring their R/3 , BIW , Solution Manager and Portal systems . Requested to forward the needful document to me at earliest on my Email id [email protected] .
Good points guaranteed as this document is very urgent to me so shall go out of way to assign more points if document is useful .
Thanks and Regards,
Somya

Daily Task:
Check that all application servers are up.      SM51 SAP Servers
Check the CCMS alert monitor      RZ20 CCMS Monitor - Look for Alerts
Check work processes (started from SM51).      SM50 SM66 Process Overview - Analyze work processes with a very long "running" status or status "complete"
Look for any failed updates (update terminates).      SM13 Update Records Check all updates with status error
Check System Log      SM21- System Log      Check for: Errors
Review for cancelled and critical jobs      SM37 Select Background jobs      Review any cancelled or long running job
Check for "old" locks      SM12 Lock Entry List      Check for locks older than one day. Analyze
Check users on system      SM04 Users AL08 Users      Review for unknown or different user ID and terminal. Take a look at the user distribution on servers
Check for spool problems      SP01 Spool List      Look for spool jobs that have been "in process" for over an hour.
Review and resolve short dumps      ST22 - ABAP Dump Analysis      Look for an excessive number of dumps Look for dumps of an unusual nature
Review workload statistics.      ST03 Workload: Analysis of <sid>
Check QRFC      SMQ1 - SMQ2      Check no. of queue entries, deregister and register queues
Check TRFC      SM58      Check hanging TRFC's
Review UNIX system logs for problems.      OS06S OS Monitor      Review operating system log
Review buffer statistics.      ST02 Tune Summary      Look for swaps
Please note that above list is to be understand and accordingly check respect to your SAP R/3 system. Any decision to be taken is depend on your system and your analysis. This is just the few transactions which is given to help you to start with your activity.
Reward points if this is of any help to you.
Thanks
Best Regards,
Chetan Khatri

Can you have two detail lists from the basic list at the same time?

Hi
Can you have two detail lists from the basic list at the same time?
If yes how and if no why?
Thanks
Venkat

No   ... it is not   possible   of   2 detail list at   one time   from the basic list ...
you can increament   the SY-LSIND .... But you can not   display both the windows   at single time ...
it is possible to display 2 Detail list in ALV   ...... from one basic list   using the Blocked list concept    .
Sample Program on BLOCK LISTS
Report   zblock_list
* Declarations for BLOCK ALV DISPLAY
*--type pools
TYPE-POOLS:slis.
DATA:x_layout TYPE slis_layout_alv,
t_field TYPE slis_t_fieldcat_alv,
*--field catalog
x_fldcat LIKE LINE OF t_field,
*--to hold all the events
t_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
t_sort TYPE slis_t_sortinfo_alv,
x_sort LIKE LINE OF t_sort ,
*--Print Layout
x_print_layout TYPE slis_print_alv.
*----Macro to add field catalog.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
DEFINE add_catalog.
clear x_fldcat.
x_fldcat-fieldname = &1.
x_fldcat-seltext_m = &2.
x_fldcat-outputlen = &3.
x_fldcat-tech = &4.
x_fldcat-col_pos = &5.
x_fldcat-no_zero = 'X'.
x_fldcat-ddictxt = 'M'.
x_fldcat-datatype = &6.
x_fldcat-ddic_outputlen = &7.
if &6 = 'N'.
x_fldcat-lzero = 'X'.
endif.
*--build field catalog
append x_fldcat to t_field.
END-OF-DEFINITION.
*----- data declerations.
data: v_repid like sy-repid.
data: begin of itab occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
meins like mara-meins,
end of itab.
data: begin of jtab occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of jtab.
select matnr ernam meins
up to 20 rows
from mara
into table itab.
select matnr maktx
up to 20 rows
from makt
into table jtab.
v_repid = sy-repid.
*DISPLAY alv
* Initialize Block
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = v_repid.
*Block 1:
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '18' '' '1' 'C' '18',
'ERNAM' 'Created By' '12' '' '2' 'C' '12',
'MEINS' 'Unit' '5' '' '3' 'C' '3'.
*--build table for events.
x_events-form = 'TOP_OF_LIST1'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'ITAB'
it_events = t_events
it_sort = t_sort
tables
t_outtab = itab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--BLOCK 2(SUMMARY REPORT)
*INITIALIZE
refresh t_field. clear t_field.
refresh t_events.
*field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
add_catalog:
'MATNR' 'Material' '20' '' '1' 'C' '18',
'MAKTX' 'Description' '40' '' '2' 'C' '40'.
*--build table for events.
x_events-form = 'TOP_OF_LIST2'.
x_events-name = slis_ev_top_of_list.
append x_events to t_events.
* Append table block.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = x_layout
it_fieldcat = t_field
i_tabname = 'JTAB'
it_events = t_events
tables
t_outtab = jtab
exceptions
program_error = 1
maximum_of_appends_reached = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*--CALL FM TO DISPLAY THE BLOCK REPORT.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
* exporting
* is_print = x_print_layout
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_list1.
skip 1.
write: 10 'List 1',
/5 '--------------------'.
skip 1.
format reset.
endform.
form top_of_list2.
skip 1.
write: 10 'List 2',
/5 '--------------------'.
skip 1.
format reset.
endform.
reward points if it is usefull ....
Girish

MB51 Detail list import to excel - Authorization object

Dear all,
What is authorization object to import mb51 detail list to excel ?
Jeyakanthan

HI,
Try this link
Problem with authorization object belongs to MB51
Regards
KK

Detailed list of subscriptions of folders

Similar Messages

Maybe you are looking for