Detailed Navigation doesn't show

J2ee_admin can see detailed navigation, but another user can't,
need any roles?

Hi,
No. That appears by default. If it doesn't appear, check for the following.
1) Check if it has been collapsed by someone. Click on the small arrow on the left of the framework page and check if it expands.
2) If not, check if some custom desktop has been assigned to all the other users. For this, check the master rule collection under System Admin -> Portal Display -> Desktops and Display rules -> Portal Content -> Portal Administrators -> Super Admin -> main_rules. Check which desktop is assigned.
Regards,
Harini S

Similar Messages

The 'Load Details' screen doesn't show the rows for 'Loaded'

Hi All,
May I request for inputs on the following issue please. Request iSetup Development to confirm if this is the intended feature.
Customer complains that when they view the details of a Load, the 'Loaded' column doesn't show any numbers (rows).
Customer expects to see the numbers for this column. Why this is left blank?
I can see that even the documentation shows the blank column.
Oracle® iSetup User's Guide Release 12.1 Part No. E12899-04
CHAPTER 5: Migrations
Viewing a Load (Page 5-35)
The above page shows the Screenshot of 'Load Details'. The 'Loaded' column doesn't show any details. It is blank.
Request for confirmation.
Regards,
Ramana.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you wish to enable the reveal password icon for your system. I am happy to help. It really depends on which version of the Operating system you are running, because this sort of thing is normally controlled using the Group Policy Editor. That tool is not a part of a Home edition, you would need the Pro version or higher to have that. Assuming that you do have a pro edition or higher, then these may be of help to you:5 Ways to Access Local Group Policy Editor on Windows 10 - isunshare.comDisable or Enable the new Password Reveal Button feature in Windows 8 - windowsclub.com Unfortunately the version of Windows 10 I have installed beside me is the home edition as well, so I cannot access this, to verify, so let me know if that works for you.

Detailed Navigation Not shown

It seems if an ip address used instead of hostname in the browser, the detailed navigation will not show. e.g. http://192.168.0.230:50000/irj will not show detailed navigation but http://Redapple04:50000/irj will show.

Hi,
I think that is not true. I have checked with both. Detailed Level Navigation(DLN) shows up with both IP address and host name. In both the cases, default framework page(DFP) is only getting displayed. By default, DLN is visible in DFP. So it doesn't matter if u use IP address or host name. May be there can be some other changes with both but not with any display.
Regards,
Harini S

Caching on detailed navigation besides navigation cache?

Hello Everyone,
We use Btexx EasyWCM as a content management system on our SAP NW portal.
When we create a new page in the portal it should appear directly in the detailed navigation, but instead it appears much much later, often after more then an hour. The same happens when deleting a page.
We thought of navigation cache at first but we disabled it and the problem was still there.
Because the new page does appear after a while, what makes it time-based, we still think it might be a caching issue. We don't know what other caches influence the detailed navigation.
The page does appear in the PCD (role) directly after it is made, same goes for deletion.
We tried a restart already, but that didn't resolve anything. And I donu2019t think it's a network problem because the PCD updates instantly. Just the detailed navigation doesn't. Even when we changed the customised detailed navigation back to the standard SAP detailed navigation there was no difference.
We tried creating a page directly on the server so the caches of the proxy's etc could be excluded and the problem was still there.
Thanks.

Hello Sander,
that's good to hear. But you do not need not turn the navigation cache off.
easyWCM supports the new Navigation Cache API. If a editor changes navigation structures, easyWCM automatically invalidates the relevant roles from the cache.
Please check if your SAP Portal release and easyWCM release supports that feature.
More information are available on our support plattform:
http://www.btexx.de/support/
Best regards,
Michael

Light Detailed Navigation Vs Heavy Detailed Navigation

Hi All,
What are the advantages/ disadvantages light detailed navigation have compared to normal detailed navigation. Is there any comparison chart available?
Using normal Detailed Navigation, I could not see the URL's in my browser ( its always http://server:port/irj/portal ). I want to use the short urls and show the url in browser. Its working fine ( can see the url's) when used light detailed navigation.
how to view the urls ( navigation url's) when used normal detailed navigation?????????? I know if we use light detailed navigation we can achieve this, but need it with normal / regular detailed navigation.
Thanks,
PradeeP

Thanks again,
As per the comparison sheet, SAP says Short URL's and Quick Links are supported in Default Framework page. But when I use Default Framework page with Default detailed navigation, Its not showing up the URL's in browser, I couldn't even see the short URL, Quicklinks while navigation in portal.
My Actual requirement is giving the portal URL's links to the users to access and end users can get iview / page urls and save it for his / her future purpose.
By using the Quick Links, we can give the quicklink to the enduser that he can use ( like http://xxx:5000/irj/portal/QUICK LINK).
But when end user is navigating in portal using default famework and detail navigations, he couldnt see this quick links in browser.
If I put Light Detailed Navigation with Default framework, will it work?
because we have ESS and some BSP apps in our portal which uses EPCM and Work protect mode which is not supported by Light framework. But will it be supported by Default framework with light Detail navigation?
Thanks,
Pradeep

Detailed Navigation not displaying giving ip address instead of hostname

Hi
I created applications in web dynpro.So i imported in the Enterprise Portal.
In that I created Role----Under That Worksets (X ,Y ,Z, W) -For each workset I created more than 4 Pages to that---For each page i added Iview.
I added "IP Address" and "HostName" in the c:/windows/system32/drivers/etc/host
Then i login into the Portal with normal URL
http://<HostName>:50000/irj/portal
So its Displaying.....Up to this its fine...
If suppose i want to login with
http://<IP Address>:50000/irj/portal....Under Each Workset, one page is showing,,,means one Iview is Visible...means Detailed Navigation is not showing.
All Pages are not visible...
Please any one help me to do this....
So its not possible to say to anyone ,,,,u have to add this ip Addrss in the path.
Please Provide the Permanent solution ,,even by giving IP address also all pages and Iviews must see..
Regards
Sushma

Hi Sushma,
I am not sure if the same apply when you access the URL through the IP. The SAP BI works on the concept of Fully Qualified domain names for access and also there is a system of web dispatchers which are configured for the domain name to handle report requests.
Also with portal in place you will not be able to see the URL of the application running within portal
for example the URL we see are
ttp://<xyz>.com/irj/portal but then the individual URLs for the applications running within the portal cannot be seen...due to security reasons.
That could be the possible case.
Regarding Use of Portal at client place:
1. You can use the VPN connectivity. You will only need to give the access rights to the perticular id & that will be all.
2. Assign the portal port to the some global address. That will work.
But, I suggest, VPN is better.
Regards
Chander Kararia
Edited by: Chander Kararia on Feb 6, 2009 11:10 AM

No detailed navigation with navigation connector

Hi at all,
I want to implement my own navigation connector in order to extend the portal navigation. So far I have been able to successfully register the navigation connector and the portal already renders my first and second level navigation nodes. However, the portal will not show a detailed navigation for my navigation nodes in higher levels than the first and second.
I have validated that the child nodes are defenitely there, they just won't show. In fact, the whole detailed navigation iview seems to not show up.
Does anybody have an idea why the detailed navigation does not show up for navigation nodes that were registered with a navigation connector?
Best regards,
Jan Marquardt
Edited by: Jan Marquardt on Oct 20, 2008 2:08 PM

Hello Jan,
Even i am facing this problem. when i select the workset in the toplevel navigation, i am not able to view the iviews in detailed level navigation. where do i get Visualization property attribute.
kindly provide the steps.
Thanks
Eben

Detailed navigation panel doesn't show the link

Hi,
I created a role and I put an existing workset in it (delta link) but I removed 3 iviews out of 4 from the workset.
When I check the same workset in another role I see 4 links for 4 ivews in detailed navigation panel.
However I don't see any link in my new role's detailed navigation panel for the ivew.
I compared all the properties settings and saw no difference. Does anybody know how do i see my iview in detailed navigational panel?
I appreciate any help with points,
Regards

Hi Mike,
Newrole1 : New Role that you created.
Workset1: Existing workset
iv1 existing iviews for the workset.
iv2
iv3
iv4
But you have only iv4 assigned to your NewRole1 that you created( delta linking the workset1 and removing 3 iviews)
But the iv4 does not exist under your role?
You can try checking the permissions on this iview.
Also, did you try checking with a different user being assigned the role or the same user using the exisiting workset.
Regards,
Sandeep Tudumu

Material product types doesn't show in line item detail

Good morning,
We have a problem with product popup of service order in line items.
When we make a click in product ID on the service order search, a popup shows and it displays all products.
But if we go to Detail Position Id and do the same, the popup shows but Material product types doesn't show.
Regards,
Euge.-

Hi Abhi,
Thank you for your advise.
Yes, OBCN has been maintained with posting indicator "2".
During the testing, when we did GR (MIGO) there is no tax calculated, will the tax calculated and show in separate line item when we do Invoicing (MIRO)?
Thank you in advance.
Regards,
Izzat

When i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

when i add a new contact to my phone, their details are saved in my contact list, but the name doesn't show up when they ring or txt me, how can i change that?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Outlook mac Doesn't show the Meeting organizer's full detail as in contact when you hover over

In the out look , when you received an meeting request, we can see the organizer's email address, but when you hover over the email address it says "presence unknown" and didn't show any details of that email user.
But i can see the contact search is in All Folder. when its in all folder it doesn't show his contact. but when i change the search to default GAL LDAP i can see the mail user's details in the contact.
I hope if i can change the " contact search to Default globla address list LDAP " when you hover over we can see the email user's detail.. But i have no idea how to change the defaut Contact search to another one frm ALl Folder .
Help me to change this.
Thanks
saththiyan

I have this problem in all the MacBooks... Pro, Air, Ect Ect..

Making Detailed Navigation show, and put som links in there.

Hi!
I am trying to make some links show in Detailed Navigation(DN), but no matter what page i setup it doesnt show and when i expand DN my iviews still doesnt show.
I`ve tried to alter my default framework file at the inner page setup to make DN show, with no luck...
And i have tried to alter each page to make it show.
Any ideas?
Regards
Simon

Hi Simon,
Yes sure!! this was much better explaination
But as far as I know there is no way that you can show the iViews in the detail navigation if it is added to the page.
Look what the hierarchy of these are:
Workset|_ Page1|_ iView11.
 |_ iView12.
 |_ iView13.
 |_ Page2--|_ iView21.
 |_ Page3--|_ iView31.
But yes there can be one way out, you can directly add the iView to the workset. Then those specific iViews can be displayed in the detail navigation.
Workset|_ Page1|_ iView11.
 |_ iView12.
 |_ iView13.
 |_ Page2--|_ iView21.
 |_ Page3--|_ iView31.
 |_ iView_41
 |_ iView_51
 |_ iView_61 
By this arrangement you can add those three iViews which you are talking about to the workset and then view it in the Detail navigation .
Regards
Pravesh
PS: Please consider rewarding points

Support message doesn't show automatically the details about created person

Hi,
I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
Regards
Vivek

Hi Vivek,
Check if BP is created for that user and you have mapped to satellie system (identification tab)
e.g TRXN BP create business partner for that user and in identification tab maintain
ID type identification number
CRM001 <SID> <inst number> <CLNT> <User> (satellite system details)
Regards,
Shyam.

Since update to FF 16.0.1 the FF Start Page is blank, my bookmark toolbar doesn't show automatically + the navigation toolbars stays on the first url.

Since update to FF 16.0.1 the FF Start Page is blank, my bookmark toolbar doesn't show automatically + the navigation toolbars stays on the first url.
I uninstalled 16.0.1 and reinstalled 15.0.1 and everything worked fine so I reinstalled 16.0.1 and have the issues again.

hello shanonrs, can you try launching firefox in safe mode once and see if the issue is occurring there too? maybe an extension or theme is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Detail Navigation not showing up

Hi
I am running on NW04s, EP7.0.
I dont find the detail navigation in my portal for all Users. But if I log on as Administrator, then the detailed Navigation works fine. Is there a setting or some bug ?
Regards,
Murali.

Hi,
first go to the framework you are using. Open, goto InnerDesktop, open. Check that the Detailed navigation (com.sap.portal.detailedNavigationTree) is visible (checkbox). Goto layout and check that the DTN is in the Navigation panel.
Everything is OK?
Romano

Detailed Navigation doesn't show

Similar Messages

Maybe you are looking for