Detailed Navigation

Hi
According to several posts on sdn, the property "Launch in New Window" for Detailed Navigation has to be changed to "Display in Separate Window", if e.g. reports should open in a new window and not in the portal content area. The property has been changed, but reports are still launched in the portal content area, what could be wrong?
Kind regards
Steffen

Hello Steffen,
Open the iview/page which you want to open in the same Portal Content area. In their change the poperty "Launch in New Window" to display in content area.
If that doesn't work, then iviews are added as delta link. Open the role -> then the iview/page and change the property there.
Regards
Deb

Similar Messages

  • Open iviews in new window from detailed navigation context menu function

    hello,
    when we click in the detail navigation menu and in the context menu (because many of ours users are used to right click to open a link in a new window on the internet) on the functionnality "open in new window", the start page is always display instead of the corresponding iview ...
    could you tell me if there is a configuration into the portal to :
    1- suppress the function "open in new window" from the context menu in the detailed navigation !
    2- make the iview displayed into the new window really the iview desired !
    best regards,
    Olivier.

    Hi Olivier,
    The frist part is very precise. Not possible. Period. The reason is that the links are calling JS and not directly calling a http target.
    About the second part: Within the Light Framework, you create a Light Detailed Navigation. And in this case, the links are direct http links. So with that, you have what you want.
    For the Light Framework see http://help.sap.com/saphelp_nwce10/helpdata/en/43/0174a642406db7e10000000a422035/frameset.htm and around.
    Hope it helps
    Detlev

  • Unable to View the contents in Detailed Navigation

    Hi,
    I have changed the IP address of the machine on which the portal server was installed to a Public IP address and from then onwards only i am facing the problem in the detailed navigation.Everything is working fine except the detailed navigation.
    I am able to view the links in the Detailed navigation only on the local machine(Same System where EP is installed).But when i try to access from the internet on any other machine i am not able to view the links in the detailed navigation.It appears minimized.When i click maximize(Collapse tray) it doesent report any error but not links will appear in the tray.
    Portal version : Ep6 SP9
    Any help will be appreciated.
    Thanks in Advance,
    Varma.
    Message was edited by: Rajendra Varma

    Hi Rajendra,Stephan
    Please check the naviagtion properties for the IView.
    The radio button agaist the property "Invisible in Navigation area"should be selected to No.
    Or just make sure all the navigation properties for IView are correct.
    Hope this helps
    Parag

  • Can't find services in the Detailed Navigation when open from Overview page

    Hi,
    We have developed a custom area page for our ESS application. The area is visible in the Overview page as well as in TLN (Top leavel navigation). When we open the area from TLN the services under this area are visible in the Detailed Navigation(DN) on the left. But when we are trying to open the area from the overview page we can't be able to see the services in the DN and we have realized that the focus is on "Overview" in the TLN. In DN also only the Overview link is coming. But for other standard ESS applications the focus in the TLN is changing.
    Please help to find the solution.
    Thanks,
    Sekhar

    Hi Sekhar,
    Did you get any solution for this issue. I am facing the same situation.Please advise.
    Thanks,
    -Ashwani

  • Problem in loading the Portal Content Directory Structure & Detailed Naviga

    Hi
    we have installed EP6 SP16.When we are opening any tab detailed navigation is not loading.Some java sript errors are coming.Here iam pasting those errors.
    Please suggest asolution.logged in as super admin
    java script errors
    access denied.
    null or not an object.
    object required.

    Hi Gopi,
    A. <b>Pls check your browser settings</b>.
    We did face similar problems like Java script errors throwing msg's
    " null or not an object.
    object required"
    Hope you are using IE. If so,
    1. Go to  Tools - > Internet Options - > Advanced .
    Enable " http1.1 through Proxy Connections".
    2. Increase the Cache.
    B. <b>Check whether the user has permissions to access the portal content</b>
    Go to Content Administration - > Portal Content.
    Select Portal Content and right click. Select Permissions and check out.
    Regards,
    Venkat.
    [Pls reward points if useful]<b></b>
    Message was edited by: venkat

  • Detail Navigation missing when i link a web page in the WPC Scenario

    Hi to all.
    I had publish WPC site with the External Connector method.
    I have some Web Pages linked in the Navigation Structure, when i link one of this from a internal link (for example in a List link or other) I displayed the page and the detail navigation is visible and the focus on the destination page is light.
    Well, when I try to link a Web Page that not is linked in the Navigation structure (open it in the same page) the Navigation structure is missing.
    Why? How i can leave the NAvigation structure and display the page?
    Many thanks for your help in advance.

    Hi,
    this scenario is not supported by WPC. I think it was written somewhere (in a note or so). The problem is that if a page is not included in the navigation structure there is no navigation node associated. And so link to that page does not contain NavigationTarget therefore it does not trigger a real portal navigation but just displays the page in the iframe in which it has been fired. That means if you are using the standard framework page (i.e. with frames) page is shown in the inner most frame and the rest is untouched (side effect from which is that the TLN is not updated) and if you are using the light framework page after click the page is shown on the whole window as there are no iframes.
    May be you would be able to work around this by selecting such page to be opened in pop up window. Other options exist but they are more complicated as solutions.
    Hope that helps.
    regards,
    --epexpert

  • Links in detailed navigation

    how do i add new links in the detailed navigation section? is it added in workset or page?

    Hi Arun,
    The Hierarchy of Portal object is iview, Page, workset, role. You can view application once the role is assigned to the user. If the entry point is role, role and workset appears in the Top Level Navigation (TLN) and the rest of the hierarchy appears in Detailed Level Navigation. Usually the no of items in TLN is 2. We can change it to 1,2 or 3 depending on the requirement and the rest if any will appear in the DLN. So we cannot say which object appears in the DLN.
    Also there is concept of Workset within Workset, Page within Page. It all depends how the object is packaged.
    Have a look at this documentation
    http://help.sap.com/saphelp_nw04/helpdata/EN/47/3f703e632c7937e10000000a114084/content.htm
    Regards,
    Ganesh N

  • How to put a web link in the detailed navigation

    How can you put a web link in the detailed navigation?
    I know that if your role contains iviews that are 3 levels down (default), then the link to the iview will appear in the detailed navigation. But, I want to put a link to a external site in the detailed navigation - is this possible?
    Thanks
    Patrick

    I have a page set with a url iview and it opens from the detailed navigation in a  new window fine.
    however when clicking on a link to the page via a landing page which displays the KM content page folders, it loads it in the portal active window still (with nav and masthead).
    Any ideas how to get the km link to open in a new browser window?
    thanks
    Message was edited by:
            Alex McKnight

  • Can you default a detailed navigation folder to an "open" state?

    We have a workset containing iViews, and the detailed navigation on the left displays the iViews within a folder as we would like.  However, the folder defaults to being closed, thus making the user click twice to arrive at an iView inside.  Is there a way to default that folder to being open?

    Hi Kris,
    Its is not possible to have a folder expanded by default when you have all other parallel folders are closed.
    Either you can expand only the root folder on DLN or expand all the folders. Expanding all the folder option would need DLN .par customization.
    Set the below settings to open launched folder:
    Go to Your current Framework Page -> Desktop inner page -> Open Detailed Navigation iView and set the property ->  Open Folder when Launched as yes.
    Initial State of Navigation Panel option shall expand/close the entire DLN.
    Ram

  • How to Display Detailed navigation passing Top level navigation node name

    Hi All,
    I have prepared a DLN par file but unfortunatly my requirement is such that I need to pass one of the toplevel node name as input parameter and that should display the corresponding DLN which is from 3rd level.
    I have checked in sdn for passing a value to the navigation tag lib which will consider it as a selectednode but could find none.
    Can some body suggest me how to acheive this.
    Thanks in Advance.
    Sai Krishna. K

    Hi Kiran,
    Thanks for your Reply..
    Following is my Scenario:
    I use 2 same versions of portals connected via federated portal concept.
    I have my detailed navigation par file in portal2 and was calling it from portal1 from a iview.
    Since I am not physically navigating in portal2(which mean there is no selected node to iterate ), when I call that iview in portal1 it is picking up only 1st node in top level navigation.
    So i need to pass "My reports" (as 1st level) & "India" (as 2nd level) as parameters such that it gets only its DTN at all times from 3rd level.
    Hope you understand my scenario, below is my iteration code logic.
    <div id="myslidemenu" class="jqueryslidemenu">
    <ul>
         <nav:iterateSelectedNavNodesLevel level="<%=START_LEVEL%>">
         <%-- the 'currentDepth' attribute provides the byte value of the current level --%>
        <nav:recurseNavNodeChildren currentDepth="depth">
             <% current = start + depth.intValue() - 1; %>
             <%=writeClosingTags(last - current)%>
             <%
            last = current;
            %>
            <%-- we want to distinguish between folder and leaf nodes so we can use different graphics --%>
              <%-- complete the html syntax for the 'class' attribute pass it as an anchor attribute--%>
              <li><nav:navNodeAnchor navigationMethod="byURL" />
              <%-- checks for additional navigation level and the appropriate html tags to accomodate them --%>
            <nav:ifNextRecursionDepthWillIncrease>
                <ul>
            </nav:ifNextRecursionDepthWillIncrease>
            <nav:ifNextRecursionDepthWillNotChange>
                </li>
            </nav:ifNextRecursionDepthWillNotChange>
        </nav:recurseNavNodeChildren>
        <%=writeClosingTags(last - start)%>
        <% last = start; %>
    </nav:iterateSelectedNavNodesLevel>
    </ul>
    </div>
    As per the passing parameter concept please explain me a bit more clear with step by step procedure.
    <b>Here if not passing parameters, providing static values will also do for my requirement.</b>
    Many Thanks,
    Sai Krishna.
    Edited by: Konchada Sai Krishna on Feb 14, 2009 9:42 PM

  • How to disable automatic loading of iView/Page in detailed navigation?

    Hello,
    We've upgraded our portal 7.0 from SP9 to SP12.
    I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
    I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
    These two are not solving this problem and they are disabled anyway.
    Any ideas...?
    Roy

    Roy,
    Role and Workset Hierarchy:
    Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
    I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
    Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
    Hope this time it helps you.
    Thanks
    Mona

  • How can you set the default width of the 'Detailed Navigation iView'?

    Hello,
    we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
    So far, we havn't found the right item in the portal admin to do this.
    Any help would be much appreciated! Thanks in advance.
    Frank Schülke, E.ON Ruhrgas, Germany

    Hi Frank,
    You can change the width of this navigation iview  by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
    upload the changed par file and restart the server.
    Hope this helps,
    (if not do get  back )
    Regards,
    Uma.
    Do award points for helpful answers in SDN!!!!!!!:-)

  • Light Framework Page-Detailed Navigation error

    Hi,
    When i use the light framework page and change the number of display levels to 1
    the detailed navigation contents disappear.
    is this a  known error..? Is there anyway to get around this..?
    Thanks,
    rocky

    Rocky,
    This thread might give you a lead.
    Light Framework Top Level Navigation Error
    Good Luck!
    Sandeep Tudumu

  • Employee search iview integration into Detailed navigation

    EP7
    ESS/MSS 600
    ECC6
    Hello,
      In the EP6 version of the TeamViewer it was easily added to the "Detailed Navigation" part of the page.  Does anyone know how to achieve this in EP7 with Employee Search?
    thx
    Larry

    Any iViews can be added to the navigation panel. All you need to do is add them to another iView or page as either a related link or as a dynamic navigation. The related links appear under a section in the navigation panel called "related links", Dynamic navigation iViews appear with their proper name in the navigation panel.
    Cheers

  • Changing Look & Feel of Detailed Navigation

    Hi Gurus
    I want to change Look & feel (e.g. font size, font type, background color etc) of Detailed Navigation in portal.
    Please can anyone let me know which PAR file or files I need to modify for that?
    Thanks,
    Vaibhav Srivastava

    hi Vibhav,
    I think the below article will help you to get the exact par file, how to modify and see the changes in portal.
    -it is my own article:)
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60caa539-8e51-2a10-0e83-e0a68ab3f5aa|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60caa539-8e51-2a10-0e83-e0a68ab3f5aa]

  • I  want to hide the detailed navigation and portal favorites

    Hello:
        Every person in SDN!
        I find another problem in WPC.
        I create a WPC role called A.After I preview this role,I  want to hide the detailed navigation and portal favorites.
        but I don't know how to do?
        Who can help me?
        lexian
       Thanks a lot!

    hi,
    you can do using default frame work page.
    1.go in portal_content/portal_users/standard_portal_users
    2.open default frame work page unclick the top_level_navigation
    then you wont be able to see TLN
    jayesh talreja

Maybe you are looking for