Detailed settings for Canon Pixma iP3000

I have installed the latest drivers but all the dialogs I get when printing don't seem to included the detailed ones I had when it was connected to a Windows box (density, glossy paper, et cetera)

Please look in the Copies & Pages pull-down menu.

Similar Messages

Yosemite printer driver for Canon Pixma IP3000

This is not so much a question as a solution to getting my old Canon Pixma IP3000 working again after upgrading to Yosemite.
Although the printer is listed, when I wanted to add it I found no software for it from Apple. Phoning Canon they also said they have no software for the IP3000 and Yosemite. To make a long story short, after much trial and error trying out other drivers which were listed on "choose driver" I found that the IP4500 driver can be configured for cassette feed AND duplex and works on Yosemite. Hope this helps someone else to keep some of the older products going in our throw away society!

I just installed that driver on a 10.10 VM and also found that there is no Duplex Print & Margin menu - just Margin.
I then installed it on a 10.8 VM to be sure the lack of the menu was not due to using the 10.8 driver on 10.10. However I found that even on 10.8, there was no Duplex Print & Margin. So it would seem that duplex printing was not an option for the iP3500.
I then checked an alternate driver suite called Gutenprint and added the iP3500 Gutenprint printer. It also did not support the ability to print duplex.
But when I added another printer, this time using the Gutenprint iP3000 driver, there was the ability to print two sided from the Layout menu. So then I thought it might be worth checking if the Canon iP3000 driver also provides a duplex setting, but the last supported OS for this model was 10.6 so I did not even try to install that old driver on 10.10.
Here is a link to the Gutenprint driver if you would like to try that.

Canon Pixma IP3000 experiences?

I have a Canon Pixma IP3000 here, and it's an awesome printer, except when I got it (I was still on Gentoo) I couldn't get it to work properly (no duplex support, bad colour prints), so I've been using it from the windows installation on my laptop. But since Arch is so awesome, I thought maybe it can work now. So, anyone have experience with running this printer?

there are good drivers based on the japan canon drivers ... but there only debian packages and i was not able to convert them with deb2targz
maybe someone could help me
drivers from : http://mambo.kuhp.kyoto-u.ac.jp/~takushi/
bjfilter-2.5 : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
libcnbj-2.5 : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
pstocanonbj : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
outputs :
[johannes@Johannes Drucker]$ deb2targz *deb
deb2targz: converting 'bjfilter-2.5_1-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'bjfilter-2.5_1-1_i386.tar.gz'
deb2targz: converting 'libcnbj-2.5_0-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'libcnbj-2.5_0-1_i386.tar.gz'
deb2targz: converting 'pstocanonbj_3.3-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'pstocanonbj_3.3-1_i386.tar.gz'
than i tried installing using pacman :
[johannes@Johannes Drucker]$ sudo pacman -A *tar.gz
Password:
loading package data... load_pkg: missing package info file in bjfilter-2.5_1-1_i386.tar.gz
if someone could help me it would be very nice!

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

Canon Pixma iP3000 and OS9

There's something strange about the OS9 driver of my Canon Pixma iP3000 printer. In OS X, I can easily view the remaining ink level information of my printer. In OS9, that option is not available. Curious, I could do that without problems in OS 9 with my old Epson 740 Stylus Color.

there are good drivers based on the japan canon drivers ... but there only debian packages and i was not able to convert them with deb2targz
maybe someone could help me
drivers from : http://mambo.kuhp.kyoto-u.ac.jp/~takushi/
bjfilter-2.5 : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
libcnbj-2.5 : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
pstocanonbj : http://mambo.kuhp.kyoto-u.ac.jp/~takush … 1_i386.deb
outputs :
[johannes@Johannes Drucker]$ deb2targz *deb
deb2targz: converting 'bjfilter-2.5_1-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'bjfilter-2.5_1-1_i386.tar.gz'
deb2targz: converting 'libcnbj-2.5_0-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'libcnbj-2.5_0-1_i386.tar.gz'
deb2targz: converting 'pstocanonbj_3.3-1_i386.deb' ...
deb2targz: skipping section 'debian-binary'
deb2targz: skipping section 'control.tar.gz'
deb2targz: wrote 'pstocanonbj_3.3-1_i386.tar.gz'
than i tried installing using pacman :
[johannes@Johannes Drucker]$ sudo pacman -A *tar.gz
Password:
loading package data... load_pkg: missing package info file in bjfilter-2.5_1-1_i386.tar.gz
if someone could help me it would be very nice!

Error Message B200 for Canon Pixma MG5320

I have an error message B200 on my Pixma MG5320 that says "Unplug power cord and contact service center." I'm more than 100 miles from my nearest Canon service center. Any fix for this error message other than to buy a new printer? With the price of gas, driving 200 miles round trip to fix the printer really isn't feasible. Thanks!

HP doesn't have any of the quality features that CANON has,
Printing, Scanning, etc. NO ! I don't work for Canon !
I have DEEP researched Epson, and HP, and it doesn't cut
it for me.

Where can I find a printer driver for Canon Pixma iP6600D? I have Mac OS 10.9.2

I have a great printer Canon Pixma iP6600D, still works great. I want to either download a printer driver or I want to learn how to transfer the driver from my Mac desk top. If I knew where to find the driver I could just manually transfer it from my desktop to my laptop. Both are running maverick.
Can anyone help me?

The last driver that Canon released for the iP6600D was v10.51 for OS X 10.7. You could try downloading and installing this driver via this link.
Note that the driver may not be digitally signed so Gatekeeper will block its installation. To get past Gatekeeper, you can right-click on the installer and select Open from the pop-up menu that appears. You will then be given the option to install the driver.

Cannot find the installed driver for Canon Pixma ip6600D

Hello,
I'm pretty new with Mac and OS X and got one problem to use a previous installed driver.
First, please excuse my bad english, I'll do my very best
I've got a Buffalo Linkstation Live 320GB with implemented USB Ports.
You can take the USB Port to use with a printer.
The Linkstation will be a Windows Printserver.
I've connected a Canon Pixma ip6600D at USB Port one and all works fine with Windows XP and Vista via network.
Printing with this Network device uses Windows Network-printing like -> workgroup\buffalo\lp (lan printer)
With Windows this works very well. But now im using OS X Leopard.
So I've downloaded the Canon Mac OS X 10.5 Driver for the ip6600D (can be used for Network printing) and installed it.
OS X wants to reboot, so I think the extension is installed fine.
After this im going to "System adjustments" -> "Printers and Fax" -> "Windows" -> "Workgroup" -> "buffalo" -> "lp"
The Printer is found and here comes my problem: The ip6600D driver does not appear in the drop down list. Only Gutenprint ip6700.
I'm able to print with this driver, but it doesn't work very well and im not able to use CD printing.
So, wehere ist the ip6600D driver? Lost in nowhere?
If I want to search for the driver, nothing could be found.
Searching with Spotlight for ip6600 doesn't find something to use.
Only the installer image of the driver and some web links.
How do I choose the installed ip6600D driver?
Thank you much for any help.

Since there doesn't appear to be an iP6600 driver within the Gutenprint v5.1.3 list, then you could try one of the other iP models, like the iP5200. The key is to find a model that uses the same ink tanks as your iP6600D (and preferably the same engine but that is not as easy to find). If one of the other IP models doesn't help, then you could try the S800. With older versions of Gutenprint I would recommend this model as it would be good enough for text printing, but not that good for images.
If you are unable to find a compatible printer then you may have to look at changing some things. The Canon printer driver has not been designed to be used on the Mac OS X when the printer is being shared by Windows, hence the need to Gutenprint. If this model is not supported in later versions of Gutenprint, then you could look at using PrintFab (which you will have to pay for) or changing the network setup so that the printer is not connected to Windows, such as getting an Airport Express/Extreme. This would allow both OS's to connect to the printer using the Canon driver. Or you could connect the printer to the Mac and get Windows to connect to the Mac share using Bonjour for Windows.

Best Storage Practice for Canon PIXMA MG5420 Printer?

Hello,
My Canon PIXMA MG5420 Printer will be inactive for several weeks. What is the recommended best practice for preventing the ink cartridges and printhead from drying out and clogging due to inactivity?
Thanks,
Bill

Hello BSquared18,
The printer can be stored with the ink tanks and print head installed, make sure the printer is powered off properly so that the print head is capped. If you have print quality issue once the printer is out of storage, follow the steps listed HERE to perform a print head cleaning.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

IMac says it has no software for Canon Pixma MG7520. Suggestions?

I'm trying to install a new printer - Canon Pixma MG7520 but iMac says it can find no software for it. Anyone have a suggestion?

Install the Apple package of Canon printer drivers: Apple Canon Printer Drivers 3.2. Check this list of supported drivers to be sure your printer model is supported: OS X- Printer and scanner software available for download.

How install driver for Canon pixma iP 1200 printer?

I found in AUR driver for pixma iP 1500 (http://aur.archlinux.org/packages.php?d … s=0&SeB=nd)
and install it.
And found driver for printer pixma iP 4200 http://aur.archlinux.org/packages.php?d … s=0&SeB=nd.
Do driver pixma iP 1500 good for my printer, Canon pixma iP 1200? Or maybe need install other driver?

Hi newlife4rich,
Before you go through the effort of reinstalling the drivers, I think this might be an issue on the pritner side. What error are you getting on the computer? Also, do you get any error codes on the printer as well like E 1, E 2, etc..?
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Best color matching settings for canon pro9500

I tried different settings for printing 13x19 photos. Printer color management, photoshop color management with different color options. Always a difference with preview... Help please. I have no problem when printing with my old ip6700d!

1. Calibrate (I use ColorVision's Spyder http://aps8.com/spyder.html , but any hardware calibration device will be better than calibration by eye).
2. Set the Working Space to sRGB.
3. Set the Color Management Policy for RGB to Convert to Working to be sure you are converting content to sRGB. (2 & 3 addressses pfigen's concern about making sure all images are sRGB.)
4. Make sure your monitor is set to use the ICC profile generated by the calibration device.
5. Turn off Proof Colors.
6. Embed profiles or not, but if you do use the sRGB profile. Whether it gets used or not is another story.
As far as B&W, pfigen suggests Gamma 2.2, which would seem to be right for PC. Mac users might consider Gamma 1.8.
This should work well for most situations, but guaranteed consistency is an impossible task at this point.

Settings for Canon EOS 450, Adobe Camera RAW, PS CS 5 and printing photos

I have a Canon CS EOS 450, have used PS CS5 in the past. I have now been made aware of Camera RAW and have started using it. My problem is that the images varies when I open the photos in different programs. My laptop is a HP Probook, 64 bit, Windows 7, etc.
So, my question is about settings on the different devices; Camera and programs:
1. I shoot in RAW, so I believe no change in camera settings.
2. Adobe CR- I use white balance, contrast, clarity, and vibrance. Any programme changes on ACR programme necessary (ie colour, etc in the programme to match with my screen?))
3. Biggest difference between moving from ACR to PS CS5- usually a big difference between these two (colour; sharpness)
4. And what would be the best proramme to watch the photos that will look as close to what I will get if I print these in photos?

You should read up on color management. It's relatively complex, and is difficult to teach in a forum thread.
Your raw conversions are (if you haven't changed the defaults) being converted to the Adobe RGB 1998 color space.
I suspect you'll see some initial improvement in consistency by doing the following:
Open a raw image to get the Camera Raw dialog.
Click the little link at the bottom center.
Change the Adobe RGB default color space to sRGB.
Complete the opening of the file.
This will set the color space for further conversions to sRGB, which is likely going to seem more consistent when you open the images in your other apps.
After you learn more about color management, and you understand how the parts interact and what additional steps you'll need to consider, you may well want to change this setting back, or even go so far as to change it to ProPhoto RGB, which has the largest gamut.
-Noel

Which sequence settings for Canon Rebel T2i ?

Hi everyone!
I need immediate help. A friend of mine did a rough cut of a project (in Windows Movie Maker) shot with a Canon Rebel T2i.
He gave me the file (in .wmv), so that I could do a little color correction and sound editing in Adobe Premiere Pro CS 4.
I am not sure which settings I have to choose when creating a new project.
I guess the settings that I chose were wrong, because when I played the video, there was something like a blue flash covering half of the frame every second.
What should I do?
Here is a picture:

Hi there
You should re-post this in the Premiere Pro forum. This forum is for Adobe Captivate discussion.
Click the link below, then on the page that appears, click the drop-down selector and choose Premiere.
Click here
Cheers... Rick

Detailed settings for Canon Pixma iP3000

Similar Messages

Maybe you are looking for