Detailed step-by-step technicals - INFOPACK & PC
Hi SDNers,
*POINTS GURANTEED
I am working with process chains in my proj. Theres an ODS - ZODSA, for which no load is scheduled for the past few months. Now it is needed to load this infopack & that too creating a PC for this & attaching it to the main PC.
Could you pls give me a detailed step-by-step technicals in carrying out the following?
1) Migrate existing infopackage for ZODSA from dev to quality
2) (LEG) create new subchain to execute, then activate this load - start condition should be immediate, no server name
3) Attach this new chain to Z_TRANS_ALL, after the master data loads, in parallel with ZSALES_PC in dev and test
4) Migrate and test PC changes,
5) Migrate IP and chain to Production and schedule chain for daily full load.
POINTS GURANTEED
1) Migrate existing infopackage from dev to quality.
RSA1 - Transport Connection - Grouping - Only Necessary - Collection - Manual
Infopackages - Search for the Infopackage - Transfer Selection - Package - Select - Assign Transportable Package - Assign Request.
2) In dev, a new subchain is to be created to execute, then activate this load - start condition should be immediate
How to keep the start variant as changable in Qual?
Usually, start variants will be open in Qual for changing scheduling timings or others.
3) In dev, Attach this new chain to the main chain
If you know where to add the new chain to the main chain - RSPC - Edit Mode - Processing Types - Local Chain - Read the new chain - Connect to pre and succesor - Activate
In the start variant of this local chain - Select " Start Using API........."
4) Then to transport BOTH THE CHAINS from Dev to Qual and test there also
Click on the truck icon from RSPC itself and foll above steps.
You can just select process types and infoapackages if all others have already been transported.
Pls give me a detailed transport steps.
5) Finally the infopackage + BOTH THE CHAINS are to be moved to prodn, right?
Yes
Similar Messages
-
Report Deployment Details steps
Dear All,
I have Oracle Developer 9i.
Ealier i am using Oracle Developer 6i in that we can create a menu and menu will call reports through run_products but now its not supported in 9i.
Can please send me details steps to follow to deploy i had read all threds in this message groups but can't get success.
I had try using run_report_objects but its fail.
Please mention how to set the path to call report i don't want to fixed the path it self in the forms.
Also how to call parameter forms.
Regards,
Nikunj.
Message was edited by:
nikunjthakerThanks Frank,
I like the white paper base on that i am able to run report as below.
declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
BEGIN
report_id:= find_report_object('REPORT3');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,'C:\APPLICATION\employeerep.rdf');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_execution_MODE,runtime);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'REPORTSERVER');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESformat,'htmlcss');
ReportServerJob:=run_report_object(report_id);
END;
But the output is generating inside cache directory.
In the white paper its mentioning that if you want to see output before it print then use DESTTYPE= cache and Dest Format= htmlcss as u can see that i had metion the same still i am not able to get the result on screen why ? and how can i do that ?
again i had read in white paper its saying that if you want paramform before report then metion paramform=yes in other parameter i had did that as below
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'paramform=yes');
but after this i am geting parameterform as a output in cache.
Please help me on this.
Regards,
Nikunj -
XK99 detailed steps to extend vendors from one company code to other
Company code X having vendors 9000000000 to 9999999999. Now I wanted to extend all vendors to Y company code. Kindly suggest me detailed steps. i know XK99 but give steps.
Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot -
LDAP configuration using AD in EP complete details steps
Hi gurus,
Can anybody provide me complete details
step to configur UME and LDAP configuration
THanks
HappyHi,
Below is the configuration for UME-LDAP. In configtool you have to do this configuration.
ume.ldap.access.server_name : <servername>
ume.ldap.access.server_port : <enter the port>
ume.ldap.access.user : <user>
ume.ldap.access.password : <password>
ume.ldap.access.base_path.user :
Ume.ldap.access.base_path.grup :
Refer the link for more info on LDAP configuration.
http://help.sap.com/saphelp_nw70/helpdata/en/63/14f5b51a6eff429f2d8b2063400e82/frameset.htm
Thanks
R.Murali -
Need detailed step by step procedure to hire an employee
Hi all,
can anyone give me the detailed step by step procedure to hire an employee?
Thanks
pabiBefore you hire try to configure infogroups and actions check all the integrations in T77s0
and go to PA40 and click on Hiring action and execute -
Detail steps in dealing with Web Service to IDoc
Dear All,
Iam dealing with Web Service to IDoc Scenario . I want detail steps like how to proceed from start to end of this scenario. Please do the needful.
Thanks & Regards,
SaratHi Sarat
Just try these
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Reward points if useful -
BDC overview details step by step
Can any one give BDC overview details step by step.
thanks,
krishnaHi
Check the Database tables of that Transaction, whether the correct number of records equal to your file were updated or not.
Process the Session in SM35 for the error records till all the records were completely uploaded into database.
see the BDC doc:
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Reward points if useful
Regards
Anji -
Windows 2008 R2 Cluster - migrating data to new SAN storage - Detailed Steps?
We have a project where some network storage is falling out of warranty and we need to move the data to new storage. I have found separate guides for moving the quorum and replacing individual drives, but I can't find an all inclusive detailed step
by step for this process, and I know this has to happen all the time.
What I am looking for is detailed instructions on moving all the data from their current san storage to new san storage, start to finish. All server side, there is a separate storage team that will present the new storage. I'll then have to install
the multi-pathing driver; then I am looking for a guide that picks up at this point.
The real concern here is that this machine controls a critical production process and we don't have a proper set up with storage and everything to test with, so it's going to be a little nerve racking.
Thanks in advance for any info.I would ask Hitachi. As I said, the SAN vendors often have tools to assist in this sort of thing. After all, in order to make the sale they often have to show how to move the data with the least amount of impact to the environment. In fact,
I would have thought that inclusion of this type of information would have been a requirement for the purchase of the SAN in the first place.
Within the Microsoft environment, you are going to deal with generic tools. And using generic tools the steps will be similar to what I said.
1. Attach storage array to cluster and configure storage.
2. Use robocopy or Windows Server Backup for file transfer. Use database backup/recovery for databases.
3. Start with applications that can take multiple interruptions as you learn what works for your environment.
Every environment is going to be different. To get into much more detail would require an analysis of what you are using the cluster for (which you never state in either of your posts), what sort of outages you can operate with, what sort of recovery
plan you will put in place, etc. You have stated that your production environment is going to be your lab because you do not have a non-production environment in which to test it. That makes it even trickier to try to offer any sort of detailed
steps for unknown applications/sizing/timeframes/etc.
Lastly, the absolute best practice would be to build a new Windows Server 2012 R2 cluster and migrate to a new cluster. Windows Server 2008 R2 is already out of mainstream support. That means that you have only five more years of support on your
current platform, at which point in time you will have to perform another massive upgrade. Better to perform a single upgrade that gives you a lot more length of support.
. : | : . : | : . tim -
Process chain detailed step procedure
dear all,
i want detailed step procedure or tutorial about process chain for beginners. i need help.
with regards,
satish.Hi,
Please search the forum before posting :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8
-Vikram -
Please send detail steps for uploading legacy data
Hi friends,
please send detail steps for uploading legacy data
Thanking u in advance,
Diwa.HI U CAN USE LSMW TO UPLOAD LEGACY DATA
LSMW is used for migrating data from a legacy system to SAP system, or from one SAP system to another.
Apart from standard batch/direct input and recordings, BAPI and IDocs are available as additional import methods for processing the legacy data.
The LSMW comprises the following main steps:
Read data (legacy data in spreadsheet tables and/or sequential files).
Convert data (from the source into the target format).
Import data (to the database used by the R/3 application.
But, before these steps, you need to perform following steps :
Define source structure : structure of data in the source file.
Define target structure : structure of SAP that receives data.
Field mapping: Mapping between the source and target structure with conversions, if any.
Specify file: location of the source file
Of all the methods used for data migration like BDC, LSMW , Call Transaction which one is used most of the time?
How is the decision made which method should be followed? What is the procedure followed for this analysis?
All the 3 methods are used to migrate data. Selection of these methods depends on the scenario, amount of data need to transfer. LSMW is a ready tool provided by SAP and you have to follow some 17 steps to migrate master data. While in BDCs Session method is the better choice because of some advantages over call transaction. But call transaction is also very useful to do immediate updation of small amout of data. (In call transaction developer has to handle errors).
SO Bottom line is make choice of these methods based of real time requirements.
These methods are chosen completely based on situation you are in. Direct input method is not available for all scenario, else, they are the simplest ones. In batch input method ,you need to do recording for the transaction concerned. Similarly, IDoc, and BAPI are there, and use of these need to be decided based on the requirement.
Try to go through the some material on these four methods, and implement them. You will then have a fair idea about when to use which.
LSMW Steps For Data Migration
How to develop a lsmw for data migration for va01 or xk01 transaction?
You can create lsmw for data migration as follows (using session method):
Example for xk01 (create vendor)
Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
1. TCode : LSMW.
2. Enter Project name, sub project name and object name.
Execute.
3. Maintain object attributes.
Execute
select Batch Input recording
goto->Recording overview
create
recording name.
enter transaction code.
start recording
do recording as per ur choice.
save + back.
enter recording name in lsmw screen.
save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
Here you have to enter the name of internal table.
display change
create
save + back
3. MAINTAIN SOURCE FIELDS.
display change
select structure
source_fields->copy fields.
a dialogue window will come .
select -> from data file
apply source fields
enter No. of fields
length of fields
attach file
save + back
4. MAINTAIN STRUCTURE RELATIONS
display change
save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
display change
click on source field, select exact field from structue and enter
repeat these steps for all fields.
save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
execute
save + back
7. SPECIFY FILES.
display change
click on legacy data
attah flat file
give description
select tabulatore
enter
save + back
8. ASSIGN FILE
execute
display change
save + back
9. IMPORT DATA.
execute
display change
save + back
10. DISPLAY IMPORTED DATA
enter ok, it willl show records only.
back
11. CONVERT DATA
execute
display change
save + back
12. DISPLAY CONVERTED DATA
execute
display change
save + back
13. CREATE BATCH INPUT SESSION
tick keep batch input folder
F8
back
14. RUN BATCH INPUT SESSION.
sm35 will come
Object name will be shown here
select object & process -
NO SID VALUE ERROR in detail steps..
Hi gurus pls xplain how to solve NO SID VALUE ERROR in detail steps..
Thanks,
Akshay a.Hi,
SID error comes during activation of ODS because the related MD is not available for assigning SIDs.
Whenever Master Data is loaded SID's are generated for those Master Data records.
Now when you load Transaction Data these SID's will used (for the records which use above master data values). This results in performance gain.
If Transaction Data is loaded first than the system checks for SID's. If they are not available system generate SID's. This results in a loss of performance.
Now in the case if you don't have the setting selected (Further Processing Without Master Data/Always update data, even if no master data exists for the data) system will throw error No Sids found and load will terminate.
So as a first step ensure that the related master data is loaded and Attribute change run has been triggered.
OR
Load the MD and Activate the MD (Modeling > InfoObject > Search the Infoobject > Right click > Activate Master Data)
Once you perform this you can retrigger the activation. It should work fine.
Else as a workaround you can blank out these particular values and activate.
There is also one more workaround wherein you can create the Master data entries directly in BW itself. But both the above step should be done after consulting Business and considering data volume that needs to be edited/created.
In most case once you perform the loading and activation of MD your activation should work fine when repeated.
OR
In the infopackage goto Update Tab and make the setting Update the records even if no master data exist and reload
This may work.
Thanks,
JituK -
MIGO : Detailed steps for doing MIGO.
Hi,
Please help me with detailed steps for doing MIGO for the delivery.
Thanks,
Edited by: hemaraaja on Jul 23, 2008 6:58 AMHi,
Enter MIGO in SAP Easy Access screen and press ENTER
Please Ensure Goods Receipt and Purchase order is selected in Drop down Box.
Enter PO number next to PO number drop down box.Also ensure whether 101 movement type in screen right top.
Press enter
In Header,in General Tab ensure document date posting date.
Enter Delivery note number(which will be useful for tracebility)
In Item detail,in Quantity tab enter quantity in unit of entry and in Where tab enter storage location and tick Item OK and click the check button.
If any error found enter the data as shown in error and click check button again and ensure no error messages found.
Then SAVE and note the GRN number in the Delivery paper which received from vendor
reward if useful
Regards -
Collective Delivery Vs Group Delivery and detail steps
Hi, I am new here so apologies if i post something that doesnt belong here. i know there are posts on this topic, however i wanted to have a bit more precised description on this. so i will appreciate if someone can explain it to me.
1. Is Collective delivery = Group delivery?
2. Can Collective / group delivery be done for different sold to, ship to parties, different material, delivery date and shipping points? If yes can somebody plz give me detail steps?
How to process one delivery for multiple sales orders ? (both with same sold to ship to, material, shp point and with different ones)
How can billing be processed when one delivery is created for many orders?
3. How collective / group delivery processed in back ground and upfront? also in batch? will appreciate steps plz.
4. How does "variant" works in delivery creation? the word is Variant is confusing here for me.
Thanks.Hi SAP SD,
U r correct, U did partial delivery that's the reason document flow show's u delvery is in process.
Once all order quantity will deliver it shows status full.
Reward if it helpful.
Regards
Sasikanth.Ch -
Stuck on "Provide your payment details" step.
Hello,
I am trying to pay for creative cloud for individuals with annual monthly plan, but the "Provide your payment details" step is stuck and loading forever.
I tried different browsers, restarting internet connection, trying different PC, no success. I need to start a project right now, but I can't buy the software?
Please help! Thanks!The Creative Cloud single-app membership for Illustrator (month-to-month) has been placed successfully on January 12th 2015. Please confirm if you were placing any other order.
Regards
Rajshree -
Detailed steps for migrating standard buisness content
Hi,
Please provide me the detailed steps for migrating existing 3.5 standard business content datasources to 7.0 version
Thanks in advanceECC - RSDS - Give Datasource - Menu - Migrate
<b>* Do it with export</b>
Message was edited by:
Jr Roberto
Maybe you are looking for
-
HP LaserJet 200 colorMFP M276nw-Can't print custom sized paper
HP LaserJet 200 colorMFP M276nw I'm trying to print on a custom page Size (95mm x 171mm) but it starts printing about a third way down the page so the whole text insint printed. I adjusted the paper tray to the right size, canged the page size to my
-
How do i update a ipod 1st generation ?
How do I update a ipod 1st generation or 2nd generation ? MB528LL
-
Creating shortcut to a file upon installation
I want to create a set up program that could install all the files and create a shortcut to that file on the desktop....plz tell me how to do it irrespective of the platform used
-
4 x 2.5 GHz PowerPC G5 crashes - you must restart your mac, hold the power button etc. - once or twice daily. Otherwise works perfectly. I have repaired permissions and rebuilt the directory with Disk Warrior, not that I expected either to help - th
-
Urgently need code for tetris game
RULES OF GAME: 1. Spheres come down from the top of the game board in pairs. A player can rotate them on their way down. 2. Spheres come in 4 different colors: red, blue, green, and yellow 3. Linking four spheres of the same color (horizontally, vert