Details about BayerGreenSplit and its value

Does anyone know anything more than the few lines written in the DNG documentation about this tag, BayerGreenSplit?
How is the green pixels divergence measured? How can one decide what BayerGreenSplit value corresponds to his/her camera?
The 0 - 5000 range looks quite strange. Maybe the phenomena described has also another name?
Any help is appreciated.
Thank you.

OK, I exhaled. ;)
Used to think the weird clay texture ACR rendered high frequency detail like blades of grass and foliage in the distance in my Pentax PEF's was something undesirable. But after comparing ACR's ease of use, quality and speed of its editing tools and simpler interface compared to other raw converters, the odd texturing is tolerable.
And besides that it can only be seen at 200% zoomed view anyway and can't be seen even on 20x30in. print enlargements. This texture also produces some very clean results when applying aggressive sharpening as well, so I'm thinking whatever algorithm Adobe's engineers are using to produce such a texture must be intentional.
I'm just fascinated by all the variations achieved just with demosaicing algorithms.

Similar Messages

  • About IPS and its working

    i want to know in detail about IPS and its working.Also is it using artificial intelligent or neural network for self upgrading reason.

    No, the sensors are not intelligent. They will very happily sit there dumb until updated manually.

  • Display data to edit based on fields and its value defined in internal tabl

    I need to display data in a internal table for editing in a screen.
    you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
    The internal table's structure not fix. you can have any number of fields in the internal table.
    Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
    have to display data vertically as below in editable format,
    for example,
    Airline
    Flight Number
    Flight date
    Flight price
    Airline Currency
    Plane Type
    Maximum capacity
    Occupied econ.
    Total
    No of fields will change.
    also F4 help needs to be attached with each field.
    I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
    it will be great help to me..
    Sanjeev

    Hi
    just check out this program DEMO_DYNPRO_STEP_LOOP.

  • Function to extract characteristics and its value from PI sheet

    Hi experts,
      I am working on a report to generate Avg. deckle for the month form the PI sheet. In the PI sheet the data that is displayed is basically the message characteristcs and its value.
    Please tell me ne function that will give me the related data to be displayed.
    Thanks in advance..

    reading the characteristics: CAVC_DB_READ_CFG_IN_CBASE.
    reading the values according to the characteristics: CARD_CHARACTERISTIC_READ.
    Note: the second FM is obsolete according to SAP. but it still works in opposition to the new ones.

  • Is there any function module to get vc characteristics and its value using material number?

    Hi Experts,
    I am using BAPI_CLASS_GET_CHARACTERISTICS, BAPI_OBJCL_GETCLASSES to get characteristics description and its values.
    Is there any other Function module to pull this values using material number?
    Thanks in Advance.
    Ramkumar

    Have you tried this BAPI_OBJCL_GETDETAIL
    Import parameters
    MATNR value in the OBJECTKEY
    MARA in OBJECTTABLE
    Class name in CLASSNUM
    '001' in CLASSTYPE
    You will get the Class Characteristics data into these tables:
    ALLOCVALUESNUM
    ALLOCVALUESCHAR
    Jogeswara Rao K

  • I love AI love Apple.  I own an iMac, a MacbookPro, an iPad, and an iPhone.  I've been a loyal Mac user since the '80's.   But, please, when are you going to do something about iCal and its Reminders component?  Attaching documents is clumsy. If you're on

    I love AI love Apple. I own an iMac, a MacbookPro, an iPad, and an iPhone.  I’ve been a loyal Mac user since the ‘80’s.   But, please, when are you going to do something about iCal and its Reminders component?  Attaching documents is clumsy. If you’re on iCloud, as I am, repeating events is impossible.  The ability to copy text or graphics into either events or Reminders doesn’t really exist.  This is an easy fix.   Why not get it done? 

    Maybe things will improve this summer,
    http://www.apple.com/macosx/mountain-lion/features.html
    Regards,
    Captfred

  • Characterstics and its values

    Hi All,
              In whih table i could find Characterstics and its values.
    regards
    sunil

    Hi sunil,
    T2513                          Table of Characteristic Values
    T2538                          Table of Characteristic Values
    will give you Characteristic wise values.
    AUSP                           Characteristic Values for STD LOBM Characteristics.
    Find Some More herewith.
    COMM_CFGCLNHIER                Numeric Characteristic Values Hierarchy
    COMM_CFGCLSHIER                Symbolic Characteristic Values Hierarchy
    COMM_CFGNHIER                  Numeric Characteristic Values Hierarchy
    COMM_CFGSHIER                  Symbolic Characteristic Values Hierarchy
    COMM_CFGVALSYM                 Symbol Table for Characteristic Values
    EHQMT_CODE2                    EH&S-QM: Assignment of Characteristic Valu
    IBSYMBOL                       IB: Characteristic Value Assignment
    PGPLE                          SOP Characteristic Values
    RCCHARVAL                      Characteristic Value for Classification
    RSMDTMPTAB                     Temporary Storage for Characteristic Value
    SCEVALSYM                      Symbol Table for Characteristic Values
    T22A7                          Text Table for Characteristic Values
    T22A8                          Text Table for Characteristic Values
    T22A9                          Text Table for Characteristic Values
    T22B0                          Text Table for Characteristic Values
    T22B1                          Text Table for Characteristic Values
    T22B2                          Text Table for Characteristic Values
    T22B3                          Text Table for Characteristic Values
    T22B4                          Text Table for Characteristic Values
    T22B5                          Text Table for Characteristic Values
    T22B6                          Text Table for Characteristic Values
    T22E6                          Text Table for Characteristic Values
    T22E7                          Text Table for Characteristic Values
    T22E8                          Text Table for Characteristic Values
    T22E9                          Text Table for Characteristic Values
    T241B                          Description of Characteristic Values
    TDCHARACVALUE_T
    TDCHARACVALUE2_T
    TE518G
    TF199C
    TFC_INST_VAL
    TFC_TEMPL_VAL
    TFIN000
    TFK115G
    TFK115S
    TFK125G
    TKEPROT
    TRACC_GROUP
    TRACC_GROUP_T
    VTBLSLA
    WRF_APC_PACHR
    WRF_CHARVAL
    WRF_CHARVALT
    WYT2M
    I am sorry but I have pasted this much data because you haven't specified the requirement.
    Regards,
    Shyamal
    Edited by: Shyamal Joshi on Aug 20, 2008 1:01 PM
    Above all will give you in form that can be transported to EXCEL

  • h:outputText/ and its value property

    I have this case:
    <h:outputText id="text1" value="#{varpak.status}" />
    now, I would like to format its value property to be something like:
    <h:outputText id="text1" value="myFunction(#{varpak.status})" />
    and then to write myFunction's body. Is this possible? How can I do that? Is there any example? I couldn't find any. Where should I put myFunction's body?
    Thank you in advance.

    I'm not talking about JavaScript.
    I would like to write my own Java function:
    String formatStatus(String status, Date date) {
    If (status.equals("A"))
    return "Active from date " + date;
    else
    return "Not active";
    and then to replace inside my dataTable's column:
    <h:outputText id="text2" value="#{varpaketi.status}" />
    with:
    <h:outputText id="text2" value="#{pc_Paketi.formatStatus($status, $date)}" />
    where $status and $date are dataset variables which were displayed in column of my datatable.

  • Oracle Payables report showing details about Suppliers and balance

    Hello,
    I am working in Oracle 11i environment.
    I am looking for a report that shows the details about Suppliers, their Invoices and the balances that exist for those suppliers. And the total invoice amount.
    Which report should I run in the Oracle Applications.
    Thank you

    Hello Octopus,
    Yes, I have run the Trial Balance report. but it is just showing the Liability account, Invoice AMount and the remaining amount columns only. I dont have any other details on the report.
    The details of the reports are something like this.
    Liability Account Invoice Amount Remaining Amount
    01-000-2210-0000-000 9,xxx,xxx.xx 9,xxx,xxx.xx
    ================== ==================
    Total for Report : 9,xxx,xxx.98 9,xxx,xxx.xx

  • How to find custom parameters and its values?

    Hi,
    Please let me know how to find the list of custom parameters with its possible values and its use in programs?
    Thanks.

    There is no validation for the values that can be input so you can put anything in the value field. For example, try "BUK" and
    then a value for a company code you know does not exist.
    When you run a transaction with that it will default that value.

  • FM to get OA/SA history and its value

    hi guys,
    is there any FM that can be used to get OA/SA history and its follow-on documents value ..pls advice

    Hi Huang,
         i had a similar requirement and unfortunately i wasnt able to get any solution on this(probably there isnt).
    how to get Position of cursor and its cell value in webdynpro alv
    My requirement was to pick up the value from the cell and do a multi paste to all lead selected records of the same column.
    Sadly, i had to do a workaround to achieve the solution.
    1) user needs to click on "Enter" key with cursor on the cell
    2) lead select all the records where multipaste is required
    3) then click on button "Paste" on application bar to paste the values to multiple cell.
    Let me know if you get anything on this (for my education).
    Regards,
    Tashi

  • How can i remove a key and its value from properties file

    hi all,
    i want remove a particular key and associated value from the
    properties file. is their any standard way of doing?
    thanks inadvance
    daya

    hi,
    thanks
    i am able to remove the key,
    one more question how can avoid storing date and time
    in properties file.
    thanks
    daya

  • [solved] confusion about vim and its config files

    Hi, Im getting really confused with vim and its /etc/vimrc config, and the per user ~/.vimrc.
    On one of my PC's I have an untouched /etc/vimrc and a /home/jason/.vimrc which has:
    syntax on
    now, on that same PC, if I run
    vim .vimrc
    "syntax on" in green and yellow as expected, and if I run
    sudo vim .vimrc
    I also see
    "syntax on" in green and yellow, but surely this is opening it as root?
    *Edit
    Even though there is no .vimrc in /root, and the system-wide /etc/vimrc is untouched/blank
    On another PC I also have an untoched /etc/vimrc, and a /home/jason/.vimrc which has:
    syntax on
    Aswell, and:
    vim .vimrc
    has "syntax on" in green and yellow as expected, but this time:
    sudo vim .vimrc
    Has no colour?
    I cant explain this, any ideas?
    *Edit
    To clarify, both PC's have an untouched /etc/vimrc and there is no /root/.vimrc file on either PC
    Last edited by jrussell (2013-04-14 10:21:42)

    siriusb wrote:
    The configuration files in /etc are for system-wide settings. These are the default settings if not overridden by a user's own settings in their home directory.
    So running vim as your regular user will use the settings from your home directory.
    What does sudo? From man sudo
    sudo allows a permitted user to execute a command as the superuser or another user, as specified by the security policy.
    So if you didn't specify any setting in the home folder of the user you want to run vim as, and you don't have anything in /etc/vimrc, vim won't apply any custom settings.
    I understand all of that, but on both my PC's I have a clean/untouched config /etc/vimrc, and both /root/.vimrc files do not exist, so howcome on one PC I get colour with sudo vim...., and on the other I dont?

  • How to search for a field and its value in an internal table

    Hi,
    I want to search for a field(which i dont know whether it exists or not) in an internal table and on finding that field, I have to update the value of that field. How do I do it? I think its similar to how SEARCH works but i wanted to know the internal table eqivalent of it.

    Hi Sujay,
    this code will help ful to u, just gi through it,
    TABLES : KNA1,VBAK,VBAP.
    ***********INTERNAL TABLE DECLARATIONS****************
    DATA : IT_KNA1 TYPE TABLE OF KNA1,
           WA_KNA1 TYPE KNA1.
    DATA : IT_VBAK TYPE TABLE OF VBAK,
           WA_VBAK TYPE VBAK.
    DATA : IT_VBAP TYPE TABLE OF VBAP,
           WA_VBAP TYPE VBAP.
    START-OF-SELECTION.
      SELECT * FROM KNA1
      INTO TABLE IT_KNA1
      WHERE KUNNR = P_CUST.
      IF NOT IT_KNA1 IS INITIAL.
        SELECT * FROM VBAK
        INTO TABLE IT_VBAK
        FOR ALL ENTRIES IN IT_KNA1
        WHERE KUNNR = IT_KNA1-KUNNR.
        IF NOT IT_VBAK IS INITIAL.
          SELECT * FROM VBAP
          INTO TABLE IT_VBAP
          FOR ALL ENTRIES IN IT_VBAK
          WHERE VBELN = IT_VBAK-VBELN.
        ELSE.
          WRITE : / 'Customer',P_CUST,'does not exist ......'.
        ENDIF.
      ELSE.
        WRITE: / 'sales order does not exist for',P_CUST.
      ENDIF.
    Rewards points plz if useful
    Ganesh.

  • Creating a new row in a master detail VO relation and its consequences.

    Hi,
    I'm currently facing a lot of problems which make me doubt if my perception about the whole ADF entity-view object mechanism is right.
    I have a page which displays data from a master detail VO relation (master offer - detail officeinfo). I also have a small dialog LOV window which makes it possible for me to select an office to match up with the current offer... Both the office LOV and the officeInfo detail use the same Office entity object.
    This worked perfectly fine until I wanted to add create NEW offers. I created my own insert method which basically performs a createRow on the master VO and inserts the newly created row in this VO. On a sidenote, I also fill out some default data read from a property file, which is why I decided to implement my own insert method in the first place.
    Initially, the problem was that the inputText fields of the detail VO (OfficeInfo) were not displayed at all. I imagined that I also had to perform the create and insert methods on the detail VO and indeed, from that point on all inputText fields were displayed and my page was ready for input.
    Yet today, I notice that in my Office LOV which is based on the same entity as the one my detail OfficeInfo VO uses, this newly created row is ALSO visible. To me this is quite unwanted and surprising behavior. I did not expect the row already to be visible in the LOV, since basically it's just an empty row ready for input...
    Am I perceiving things wrong? Or anyone has a nice solution to fix this?
    Thanks,
    Douglas

    Hi Douglas,
    It is happening because you have created an updateable office LOV which is based on same entity object used to save your newly created records.
    Use readonly LOV based on plsql query in your page and you can keep rest of the thing as it is.
    I think it will solve your problem.
    Cheers,
    Suyog

Maybe you are looking for