Details about open hub destination

Hi
I need to know what is the significance of these terms ,what do they actually mean while creating a open hub destination.
Destination type:
Server name :
Type of file name:
Application server filename:
Separator:

Hi,
Using Open hub services u can send the data to a third party tool, to a Table, or to a File.
Destination type means whether u want to send to File, Database Table or Third Party Tool.
If it is Third Party tool u need to specify the server name where the third party tool is there.
If u Check Application server that file will be store in the application server.
Generally file type will be Comma Seperated Variable file (.CSV)
for .CSV file data seperator will be , (Comma).
assigning points in sdn is saying thanks.
Regards,
CK

Similar Messages

Help~open hub destination file is not open error!

Hi all,
I met a problem, i tried several times and all got error messages.
It is about open hub destination, i want to use it to send some files to sever, but when i execute the DTP, i got system dump:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Runtime Errors         DATASET_NOT_OPEN
Except.                CX_SY_FILE_OPEN_MODE
Date and Time          26.10.2011 01:18:09
Short text
    File "I:\usr\sap\Q26\DVEBMGS11\work\ZSS_O0021.CSV" is not open.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSB_FILE_APPLSRV===========CP" had to
     terminated because it has
    come across a statement that unfortunately cannot be executed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have two open hub, one is fine ,but the rest one always get this error. Help..........

Thanks! I checked my ID and found that i have the role to access this folder.
Then i found that our Q system have two servers, A and B, for open hub i should run my process chain in system B, but i forgot that, so i got error. After i changed to sever B, i re-active my open hub and DTP, then re-fresh the process chain and re-executed it again, the error disappeared.

Use of Open Hub Destination to load data into BPC

Hi Gurus,
I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
2) If I go for Flat Files, which is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
Your replies will be much appreciated.
Thanks,
Abhishek

Hi Anjali,
I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
Thanks for your reply.
Abhishek

To view the data in open hub destination

Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeo

Hi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM

Error in Open Hub Destination Transport

Hi All,
I am facing the following problem in transporting the openhub destination.
We have created a Open Hub Destination with following settings.
Destination Type :- 'FILE'
We have ticked the application Server name checkbox.
In the server name we have selected our BI Development Server.
In the type of File Name we have selected 'Logical File Name'. We have maintained the details in AL11 and FILE transactions.
While transporting it to our Quality system, it throws an error saying it does not recognize the server name (which is true, the server name is different in quality system).
Needed your guidance if there is any setting like source system conversion where it would change the name?
Also if you could guide me regarding the best practices to transport the entries we have created in AL11 and FILE it would be realy nice. I did a search on this in SDN and could not find any useful stuff for my case.
Thanks in advance.

Hi,
Your TR is failing, may be because in your target system, application server file system is different.
go to transaction AL11 and check that. If same folder structure is not available, get it created, or go to RSA1 and try changing your infospoke settings to point to the application sever file as in your target system.
You have to point this path to Q server.
~AK

Open hub Destinations - Third-Party Tools As Destinations

Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk

Inconsistency with ZPMSENDSTATUS for Open Hub Destination

Hi Experts,
I dont know you have come accross this scenario but I will apprecaite all your advice.
We have APO 7.0 and we are using the BW component to extract data to informatica.
Our environment is as follow
SAP SCM 7.0 SP8
Informatica PWCD 8.1.6 hot fix 13
1.we have created 5 chains with similar variants for ZPMSENDSTATUS
2. Each variant relates to a folder and workflow to be executed within informatica
3. When we execute the chains only two work correctly all the time and 3 fail
the 3 that are failing are failing within the ZPMSENDSTATUS when running API RSB_API_OHS_DEST_SETPARAMS. This is odd since the other two only differ on the workflow to be executed and obviously on the Open Hub destination. Can anyone provide some advice on this?
thanks,
Nat

Hi Maruthi,
thanks for your response but here are the details for the variants that are working and failining
working:
DEST: < here we have the RFC that relates to the logical system and the program id which is also included in saprfc.ini>
INFPARA: AERO/APO:WF_SAP_APO_PART_PLATFORM_ABP2_BGA:S_M_SAP_APO_PART_PLATFORM_ABP2
CONTEXT: OHS API
OHDEST: <OHDS defined as target>
Failing:
DEST: < here we have the RFC that relates to the logical system and the program id which is also included in saprfc.ini>
INFPARA: AERO/APO:WF_SAP_APO_PART_PLATFORM_ABP4_ATR:S_M_SAP_APO_PART_PLATFORM_ABP4
CONTEXT: OHS API
OHDEST: <OHDS defined as target>
So you see, they all target the same folder only different workflows. Still it works for the first and not for the second.

Open Hub Destination-Third Party Tool

dear all,
can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturu

Some light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP..

Third Party Tool-Open Hub Destination

dear all,
          can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
          i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturu

Some light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP..

Hierarchy Extraction using Open hub Destination

Hi,
I need to extract hierarchy data for Application code(YAPPLCD) using OHD. In the Hierarchy there are 4 components(Industry, Market, Application Group and Application Code). i need to get all the 3 details for the Application Code(i.e to which Indusrty does it belong, Market and Application Group).But HIerarchy table is having one record for each apllication code, Market, Application Group, Application code.
How to get relevant data for the application code?
My file format should be:
Appl.Code | Appl.Group | Market | Industry.

Hi Suma...
The SAP Open Hub service enables you to distribute data from an SAP BI/BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred, leveraging SQL Server Integration Services (SSIS) as the transfer/transform mechanism.
SAP BI objects such as InfoCubes, ODS objects, or InfoObjects can act as open hub data sources. You can select database tables or flat files as open hub destinations, and then use those destinations as actual sources within SSIS. To automate the extraction using SAPu2019s Open Hub Service, youu2019ll need to setup a process chain. Note that both a full and delta modes are also available as the extraction mode.
As stated already with direct extraction from SAP R/3, once data is extracted out of SAP NetWeaver® BI (SAP BW), the destination of that data could be any relational database (such as SQL Server), and then reports (from SSRS) and multi-dimensional cubes (from SSAS) can be created from that database data. The resulting SQL Server reports/cubes could then be used within the Microsoft Business Intelligence delivery mechanisms, such as through Excel, SharePoint, PerformancePoint, etc.
Hope this below link may helpful
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb
Regards
Sudheer

Guide on Open hub destinations

Hello Experts,
We will be extracting and transporting the data from BW and other systems into the Oracle Database. Can anyone plz let me know the idea on the open hub destinations in detail...

for 7.0:
http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
for 3.x:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
please search the forum.

Difference between INFOSPOKE and OPEN HUB DESTINATION

HAI,
i want the difference between INFOSPOKE and OPEN HUB DESTINATION in detailed....
thank you
@jay

Hi
See this
Re: Open Hub and Infospoke
Bye
N Ganesh

Open Hub Destination question

Hi,
We want to be able to extract data from a cube and would like to use Open Hub Destination for it. We also want to extract deltas.
The question is ..
Should we be making a single info package for this with delta capability ..
or 2 separate info packages .. 1 for full mode and another for delta mode.
Regards
Vandana

Hi,
Yes what you said it is write
from which cube do u want to retract the daat that cube will be the source
first create the open hub in RSBO tcode and
in open hub destination select aht and create the transformation between the table( to where u want to export)
then create the DTP between the cube to the table
and directly u can use the delta DTP first all the records will come and later onle delta records will be updated.
Thansk & Regards,
sathish

Open Hub Destination error

Hi,
I am working on Open Hub (first time ofcourse). And performing following steps:-
Modeling>Open Hub> InfoArea> Create Open Hub Destination> Output to File .csv. field names>DIrectory> activate> Create transformation> activate Transformations>Create DTP..Here I am getting an error that destination Open Hub is not active.
Can anyone please tell me am i missing any step here?
Thanks

Hi...
Always bear in mind that the OHD, once created, should be saved and activated, before creating any transformations or DTPs for it.
And each time the OHD is changed, all the objects corresponding to it... (The transformations and the DTPs) should be activated.
Hope this helps.
Thanks
Sree Ramya Lanka

DTP Delta request for open hub destination.

Hi expert,
As you know, In BW 7.0, open hub destination is used for open hub service, and you can create tranformation/DTP for the destination. and in some case the DTP delta is enabled.
my questions are
1) in the context menu of open hub destination, I did not find something like manage, which could list all the DTP request executed for this open hub destination..but for normal infocube or ods, you can find a list.
2) if the DTP could enable the delta, where can I delete the latest delta request, and have a new load..
3) I assume the DTP could be excuted with batch integrated with process chain by process type 'DTP', right ? if the destination type is third party tool, can it also be integrated with process chain ?
4) can give some obvious difference of InfoSpoke and open hub destination in terms of advantage and disadvantage..
Thanks a lot for the feedback.
Best Regards,
Bin

Hi ,
Please look at the links below . hope it helps .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9?QuickLink=index&overridelayout=true
Regards
Santosh

Details about open hub destination

Similar Messages

Maybe you are looking for