Details about RFID with AII and XI.
Hi,
I do have few more doubts, we have purchased hand held readers from Symbol and Intermec. As of now we are using .Net as intermediary along with the SDK's provided by them. Can I have the process of integration with SAP either using XI or AII and XI.
Will there be any documentation for the process of Integration I mean the configuration part needs to be done in XI, AII and R/3 systems. If so where could I get that. Our requirement is to have an integration with SAP.
Looking forward to hearing from you.
Thanks & Regards,
Bharadwaj Kolluru.
Hi Bharadwaj,
On similar lines as you mentioned .I have implemented one of the RFID -SAP application using INTERMEC passive devices.
For the RFID IMPLEMENTATION we were using the VC++(mfc) and the T6 API'S.
Refer one my techcnial paper highlighting the details mentioned above
Direct Link of the document is as under
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c444f8e8-0d01-0010-4d9b-c6ff68e64519.
The case study which I have mentioned in this approach is a demo application.
I should say if you got to implement any of the RFID-SAP application with this approach then you have to do the feasibility study in all aspects both cost and time wise.Hope this should help you.
Also if you want to want to know about SAP-AII then refer all the below mentioned links and you will get all the necessary information.
SAP Library (Online-Help) for SAP AII 4.0
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
http://help.sap.com -> Documentation -> mySAP Business Suite -> mySAP Supply Chain Management -> SAP Auto-ID Infrastructure -> SAP Auto-ID Infrastructure 4.0
Master Guide and Upgrade Master Guide for SAP AII 4.0
http://service.sap.com/instguides -> SAP Components -> RFID-Enabled Supply Chain Execution -> Using SAP Auto-ID Infrastructure 4.0
Business Scenario Descriptions and Configuration Guides
http://service.sap.com/scm -> RFID -> Detailed Information
Also you will find some useful info in this thread
Reg Advice for SAP with RFID..
Regards,
Pawan
Similar Messages
-
About network with controller and light ap
in my company ,we have controller 4402,and some 1240 light ap,sametimes,notes,and some client with xp or vista.now when the client with xp,the sametime can ok;but notes fail;when client with vista ,notes,sametimes could not run.
Hi,
*Nov 6 15:32:26.611: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_WTP_EVENT_REQUEST
Looks like it is loosing the heartbeat with the WLC.Just try to increase that value if that helps.
Is proper QOS in place to prioritize Capwap packets.
Regards
Dhiresh
**Please rate helpful posts** -
More details about message with code 31 (DNS update failed) in DHCP log file.
Hello,
Is there any way in Windows Server 2008 R2 to identify which exactly update has failed in DNS when code 31 is encountered.
It is for "A" record or "PTR" record of DNS ?
Thanks in advance.
Regards,
AndrejsHello Steven,
Thanks for your answer. I will look at DNS event logs.
I am asking about it because in DHCP server log time to time I can see blocks of following records:
30 04/14/15 16:19:02
DNS Update Request 10.1.10.5
PC1.domain.local 0
6
11 04/14/15 16:19:02
Renew
10.1.10.5 PC1.domain.local 2255794051 0
31 04/14/15 16:19:02
DNS Update Failed
10.1.10.5 PC1.domain.local 0
6
30 04/14/15 16:19:02
DNS Update Request 10.1.10.5
PC1.domain.local 0
6
11 04/14/15 16:19:02
Renew
10.1.10.5 PC1.domain.local 2255794051 0
32 04/14/15 16:19:02
DNS Update Successful 10.1.10.5 PC1.domain.local
0
6
For this VLAN DHCP is about to update both „A” and „PTR” RRs. Besides that I can that transactionID (2255794051) is the same.
Does it mean that first 3 records are about let’s say “A” RR for which update has failed and last 3 records are for “PTR” RR for which update succeeded?
Or, does it mean that these are two consecutive attempts to update both RRs where first attempt failed but second one succeeded?
Regards,
Andrejs. -
Confused about licensing with JDev and components
Ok, now I'm very confused.
JDev is free and ADF Faces go to OS but I dont understand what can I deploy and what I cant.
Could some one explain what can I deploy for free and what not,
Regards.If you are talking specifically about ADF Faces - the version that Oracle provides is part of the overall ADF framework which is free for deployment on the Oracle Application Server and costs money on other servers.
You can pick up the distribution that Apache will provide from the ADF Faces components that we contributed to them - and then you can use those components for Free on any server.
Oracle ADF (the drag and drop data binding and the TopLink or ADF BC components) is again free on Oracle AS, and costs money to deploy on other servers.
And JDeveloper itself is free. -
Oracle Payables report showing details about Suppliers and balance
Hello,
I am working in Oracle 11i environment.
I am looking for a report that shows the details about Suppliers, their Invoices and the balances that exist for those suppliers. And the total invoice amount.
Which report should I run in the Oracle Applications.
Thank youHello Octopus,
Yes, I have run the Trial Balance report. but it is just showing the Liability account, Invoice AMount and the remaining amount columns only. I dont have any other details on the report.
The details of the reports are something like this.
Liability Account Invoice Amount Remaining Amount
01-000-2210-0000-000 9,xxx,xxx.xx 9,xxx,xxx.xx
================== ==================
Total for Report : 9,xxx,xxx.98 9,xxx,xxx.xx -
Satellite Pro C650D - Problems with audio and game controllers
Hi,
I have recently had problems with my microphone and speakers/headphones as well as game controllers.
The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
The speakers are sometimes still working when I plug in headphones.
Some of the sounds are still coming through the speakers where as some coming through the headphones.
I have a usb game controller which also did not work any more properly.
If I assign the buttons in the program they do not work in the game.
All these device are in the device manager in one group which makes me think that it is some kind of dodgy annoying update that messes around with them.
Does any body have similar problems or know what to do best?
Cheers
LaurinHi
Can you please post some details about the notebook model and the system you are using?
Regarding the sound/mic issue:
>The microphone sometimes stops working when on Skype for example, but most of the time works fine again when I restart the pc.
Are you talking about internal or external mic? Does this happen only using Skype?
In your case I would test the mic using different applications to ensure that this is not a Skype related issue.
>The speakers are sometimes still working when I plug in headphones.
I recommend checking this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65295
The user has had an similar issue but this was related to settings in Realtek HD Audio Manger.
Her wrote:
+In the top right corner, there's a little yellow folder called "Connector Settings" in my version.+
+There, I could finally reactivate the setting "Enable pop-up dialog, when device is plugged in".+
+So now when I plug in an external speaker or headphones, it pops up and I select the option "headphone" (instead of "line-in"), and then the sound comes out only through the headphones/ext.speaker.+
Regarding the game controller:
>I have a usb game controller which also did not work any more properly.
>If I assign the buttons in the program they do not work in the game.
I dont think its notebook problem in my opinion you should ensure that the controller is compatible with games you are playing and would also recommend checking some info providing by manufacturer of the game controller. -
Populating a Combobox using Remoting with AMF and PHP
Hello all
I am using Zend framework and Flex 3.4 to create a webapp. I am stuck at how to populate a combobox dynamically using the service I created in PHP.
In some of examples I saw that result of database query was being converted into XML and then sent to Flex. This seems a little too time-consuming if I have to do it every time. I saw some examples in Adobe Docs about Remoting with AMF and PHP. That seems like a better approach although how it would be applicable here is beyond me right now.
Can somebody guide me in correct direction?
Thanks and Regards
ShivikTry this: http://code.google.com/p/as3flexdb/ is very easy to use and it
will help.
All you need to populate a combo is:
<mx:ComboBox dataProvider="{query.Records} / -
Need details about my account 32651
PLEASE SEND ME DETAILS ABOUT MY E-MAIL AND PASSWORD.
I HAVE LOST THEM. TKS.Thank you for the request.
Your Toshiba Virtual Store account 32651 has been reset. -
how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail
Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam -
I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?
The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David -
RFID in 46C - AII and XI or NOT
Hi,
we are thinking to implement RFID technology, but we don´t have AII and neither XI.
What do you think that is the best way to begin?
What are the advantadges of install AII (including extra cost for my client) and XI.
-Can i integrated RF without AII-XI? How?
-Do you know the cost in price and time to do it with AII-XI?
We are in SAP/R3 46C.
Thanks in advance.Hi,
I hope you have discovered your answer by now, However if it is still open...
-Can i integrated RF without AII-XI? How?
AII is the only SAP product which can help in RF, how ever all communication between R3 and AII takes place using IDocs carried over XI. In case you do not want to implement AII you may scout the market for any RFID device + workflow software, these should be able to talk to the R3 system with IDocs and receive IDocs from R3, thus solving the communication issue. SAP4.6C dose have place to maintain EPC codes on material master thus solving the issue of resolving materials with ID's read by the RFID reader. If the third party tools does not offer a place to persist the R3 material to ID relationships the comparision logic will have to be written in R3, something like and BADI or a user exit.
The next question i guess has already been answered, AII will come with XI and therefore netweaver.
Thanks. -
Details about BayerGreenSplit and its value
Does anyone know anything more than the few lines written in the DNG documentation about this tag, BayerGreenSplit?
How is the green pixels divergence measured? How can one decide what BayerGreenSplit value corresponds to his/her camera?
The 0 - 5000 range looks quite strange. Maybe the phenomena described has also another name?
Any help is appreciated.
Thank you.OK, I exhaled. ;)
Used to think the weird clay texture ACR rendered high frequency detail like blades of grass and foliage in the distance in my Pentax PEF's was something undesirable. But after comparing ACR's ease of use, quality and speed of its editing tools and simpler interface compared to other raw converters, the odd texturing is tolerable.
And besides that it can only be seen at 200% zoomed view anyway and can't be seen even on 20x30in. print enlargements. This texture also produces some very clean results when applying aggressive sharpening as well, so I'm thinking whatever algorithm Adobe's engineers are using to produce such a texture must be intentional.
I'm just fascinated by all the variations achieved just with demosaicing algorithms. -
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
Vendor ledger along with cheque and bank details
Dear Experts,
I have one developement my client is asking he wants to vendor all items without cheque and bank details we will get thru fbl1n but my client is asking with cheque and bank details i know these detials are getting from bsak bsik and payr tables we will get but i want to give me logics how can i get in a proper way.i will mention below my requirement kindly give me some idea.
Vendor number 360002 Name Neha Chemicals
posting date of invoice/payment Document number of invoice / payment document type invoice/payment reference invoice/payment documentdate invoice/payment amount invoice/payment partial clearing remaining amt bank code cheque number cheque pmt date cheque amt
10.05.2009 10000001 KR 1 11.05.2009 500 100 SBI 100000 11.05.2009 400
11.05.2009 20000000 KZ 1 11.05.2009 400 SBI 100000 11.05.2009 400
11.05.2009 10000002 KR 2 14.05.2009 3000 idbi 100001 15.05.2009 3000
12.05.2009 10000003 KR 3 14.05.2009 2000 idbi 100001 15.05.2009 2000
13.05.2009 10000004 KR 4 14.05.2009 40000 idbi 100001 15.05.2009 40000
14.05.2009 10000005 KR 5 14.05.2009 5000 idbi 100001 15.05.2009 5000
15.05.2009 20000001 KZ 2 15.05.2009 40000 idbi 100001 15.05.2009 40000
closing balance - 1000 -
The first document we have paid 400 only tha remaining amount is 100 (500-100) that amount they are asking in unadjusted amt
and remaining all invoices they have paid with one cheque that cheque number they want against that invocie
please observe you will get idea and give me your valuable inputs
appraisals are waiting.
Thanks inadvance
Nauma.Dear Ramesh,
I know this solution but my client is asking they want seperately for all these details and they want bank code also how can i main tain for all these things and if u dont mine kindly tell me logic how can i map the detail from payr and bsak table details give me any idea.
Thanks and regards,
Numa. -
I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?
I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere.
Maybe you are looking for
-
HT2311 itunes 10.6.3 installation error! please help!
i downloaded itunes 10.6.3 from the apple website. when i run the .dmg file the installer starts and in the end it says "the installer encountered an error that caused the installation to fail.Contact the software manufacturer for assistance". i cant
-
Podcast App crashes after a few seconds
iPhone 4 running iOS 6.0 As of this morning, my podcast app will crash as soon as it tries to connect to the podcast/apple server to refresh/download over several wifi networks. I deleted most of the podcasts and subscriptions trying to figure out wh
-
My iMac has a 1T hard drive and it is full ! So i look for the archives and there are6000 mails recovered from gmail and i can not erase them. Is it a virus? What can i do ?
-
Listing PR created through MRP alone
Is their any way of differentiating the PR created through MRP and through ME51. My need is to list PR created through MRP alone. - David Boon
-
MSI X58 Pro - Latest Chipset Driver
Hi, Off and on I get an ATAPI error on Windows 7 x64. I'm running a i7 920 on my MSI X58 Pro (NOT the Pro E version). The symptoms are simple, booting into Windows load screen I get my hard drive light lit up non stop and nothing loads. I'm not sure