Details about the JMS Producers/Consumers

Hi All,
I am new to weblogic server.
We are using weblogic server 11g .
I need clarification on JMS.
We configured a JMS to send the reports from application deployed from weblogic server( oN Windows) to another weblogic server(On OEL) in FMW. But the data flow not occurred properly.I want to check following points .
1)All producers and consumers details for ths JMS servers
2)To get the details about the messgae sent by producer and who is the consumers for the same.
3)To verify whether the JMS transfered the all messages to consumer or anythng dailed.
4)If messages were failed then details about the failure message.
5)How to verify the producer and the corresponding consumers are valid
6)Can i check the details from both the producer and consumer servers.
Thanks in advance.

Please see the announcement post at the top of this forum. It points to getting started information and various useful doc links.
Regards,
Tom

Similar Messages

  • I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

    I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text  or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

    The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
    David

  • Is there any possibility to see full details about the event?

    ipad calendar:I have no chance to read the event location fully on my ipad. It is cut and finishes with "...", thus very important meeting  number cannot be seen. Is there any possibility to see full details about the event?

    Thanks for quick reply.
    Looks like opened the event. Here is a screen shot, I marked the cut numbers with red cirsles.

  • Could you pls give the details about the Unicode conversion during Upgrade

    Hi,
    Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
    Waiting for quick response
    Best Regards,
    Padhy

    Hi,
    These are the few points i gathered during my upgradation project.
    Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
    So it is advised to keep a back-up of the existing system.
    Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
    Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
    Version Upgrade involves the following Steps.
    Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
    • First copy the entire E4B system into the E1B System which is created for Version 4.7.
    • Apply the Version 4.7 CD provided by SAP over the E1B System.
    • Now check whether all the functionalities that was in E4B system works fine with E1B system also.
    Thus the Version Upgrade involves two steps.
    1. SAP Upgradation with the help of the CD
    2. Manual Upgradation.
    1. SAP Upgradation with the help of the CD
    This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
    2. Manual Upgradation.
    This Manual Upgradation involves
    2.1 Upgradation of Standard Objects
    2.1.1 SPAU Objects
    2.1.2 SPDD Objects
    2.2 Upgradation of Custom Objects.
    Upgradation of Custom Objects can be placed under the following three categories.
    Unicode Compliance
    Retrofit
    Upgrade
    Please Find below some of the common Unicode Errors and their solutions
    1. Error:
    In case of Translate Error; ‘Dangerous use of Translate in Multilingual system.’
    Correction:
    To correct the Error occurring on TRANSLATE statement – use this additional statement before the Translate statement.
    SET LOCALE LANGUAGE sy-langu.
    This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is “sy-langu”, i.e. the log on language of the user.
    2. Error:
    In case of Open Dataset Error; ‘Encoding Addition must be included.’
    Correction:
    This Error occurs only when the MODE is TEXT.
    To correct the Error occurring on OPEN DATASET statement – use this statement instead.
    OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
    Where: dataset_name – NAME OF THE DATASET.
    Access – INPUT or OUTPUT or APPENDING or UPDATE.
    DEFAULT - Corresponds to UTF-8 in UNICODE systems &
    NON_UNICODE in NON-UNICODE systems.
    3. Error:
    In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; ‘Function module UPLOAD is flagged as obsolete.’
    Correction:
    The FM GUI_DOWNLOAD/UPLOAD is used.
    The variations to be made in the parameters of the FM:
    1. Filename – It must be of STRING type.
    2. Filetype – “DAT” is not used any longer, instead “ASC” is used.
    3. Field Separator – The default value “SPACE” is used, incase for a TAB separated file “X” can be used.
    4. Error:
    In case of CURRENCY/UNIT Addition Error; ‘Use addition CURRENCY/UNIT when outputting.’
    Correction:
    The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
    To correct this error follow the following method:
    WRITE: /3 'TOTAL',' ', TOTAL.
    WRITE: /3 ‘TOTAL’,’ ‘, TOTAL CURRENCY ‘2’. --- Where ‘2’is the Currency Key for Getting 2 decimal places.
    5. Error:
    In case of TYPE X Error; ‘Variable must be of C, N, D, T or STRING type.’
    Correction:
    We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
    So the method to be followed is:-
    1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
    2. Declare the variable as Type C, and use the method UCCP(‘XXXX’) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute “HORIZONTAL_TAB” of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
    E.g.:
    i) *DATA: TAB TYPE X VALUE 09, “Tab character
    CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    ii) * DATA: CHAR TYPE X VALUE 160.
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA CHAR TYPE C.
    CHAR = CL_ABAP_CONV_IN_CE=>UCCP(‘00AO’).
    (Here ‘00A0’ is the Hexadecimal equivalent of the decimal 160).
    3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
    E.g.:
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA : LF(2) TYPE X VALUE 'F5CD'.
    DATA : BEGIN OF LF,
    A1 TYPE C,
    A2 TYPE C,
    END OF LF.
    LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
    LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
    6. Error:
    In case of the Character “-“Error; ‘The Character “-“can’t appear in names in Unicode Programs.’
    Correction:
    The Character “-“(Hyphen) appearing in Variable names is replaced by the character “_” (Under Score) for Unicode/Upgrade Compliance.
    E.g.:
    *wk-belnr LIKE bkpf-belnr,
    *wk-xblnr LIKE bkpf-xblnr,
    *wk-date LIKE sy-datum,
    *wk-wrbtr LIKE bseg-wrbtr,
    *wk-name1 LIKE lfa1-name1,
    *wk-voucher(8) TYPE c.
    wk_belnr LIKE bkpf-belnr,
    wk_xblnr LIKE bkpf-xblnr,
    wk_date LIKE sy-datum,
    wk_wrbtr LIKE bseg-wrbtr,
    wk_name1 LIKE lfa1-name1,
    wk_voucher(8) TYPE c.
    7. Error:
    In case of The SUBMIT-TO-SAP-SPOOL Error; ‘you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition. ‘
    Correction:
    1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
    2. Call the FM GET_PRINT_PARAMETERS:
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    3. Use the SUBMIT-TO-SAP-SPOOL statement.
    E.g.:
    •     submit zrppt500
    •     using selection-set 'AUTO3'
    •     with res_no eq lo_rsnum
    •     with sreserv in preserv
    •     to sap-spool destination p_dest
    •     immediately 'X'. "print immediate
    DATA: print_parameters type pri_params,
    archive_parameters type arc_params,
    valid_flag(1) type c.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    Submit zrppt500
    Using selection-set 'AUTO3'
    With res_no eq lo_rsnum
    with sreserv in preserv
    to sap-spool
    SPOOL PARAMETERS PRINT_PARAMETERS
    ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
    WITHOUT SPOOL DYNPRO.
    8. Error:
    In case of Message Error; ‘Number of WITH fields and number of Place Holders are not same ‘.
    Correction:
    Split the statement after WITH into the same number as the place holder for that Message ID.
    E.g.:
    1. * MESSAGE E045.
    MESSAGE E045 WITH '' ''.
    2. in program ZIPI0801
    •     Start of change for ECC6
    •     message e398(00) with 'Could not find access sequence'
    •     'for condition type:'
    •     p_ptype.
    message e398(00) with 'Could not find '
    'access sequence'
    'for condition type:'
    p_ptype.
    •     End of change made for ECC6
    9. Error:
    In case of Move between 2 different Structures; ‘The structures are not mutually convertible in a Unicode program.’
    Correction:
    Make both the Data Types compatible and then assign the contents.
    E.g.:
    The statement –“move retainage_text to temp_text.” Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
    A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
    TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
    TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
    TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
    TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
    TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
    TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
    TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
    10. Error:
    In case of ‘no description found’; ‘add a GUI title’.
    Correction:
    In this type of error gui title is generally missing so add a GUI title to the module pool.
    11. Error:
    In case of ‘writing internal or transparent table’
    Correction:
    Write individual fields.
    E.g.:
    WRITE: / EXT. --> EXT should be a character type field
    WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
    12. Error:
    In case of ‘combination reference table/field S541-UMMENGE does not exist’
    Correction:
    Was due to error in reference table S541. TABLE S541 has errors
    1)”Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)”
    2)”Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)”
    Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
    And that of ZMKCODE (from ZACCODE to ATTR8)
    13. Error:
    In case of ‘KEY does not exist’
    Correction:
    The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
    14. Error:
    Incase of ‘WRITE’ statement, ‘Literals that take more than one line is not permitted in Unicode systems.’
    Correction: To correct this error, we need to align the spaces accordingly so that the statement doesn’t go beyond the line.
    15. Error:
    Incase of Data statement, ‘The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect………..’
    Correction: To correct this error, instead of “like” in the Data statement, use “type”.
    16. Error:
    Incase of DESCRIBE statement, ‘DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.’
    Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
    CHARACTER MODE is added when the data object is of flat/ character type.
    BYTE MODE is added when the data object is a deep structure.
    Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
    LENGTH clen IN CHARACTER MODE.
    Where blen and clen must be of type I.
    17. Error:
    Incase of DO-LOOP Error,’ In Do loop range addition needed‘
    Correction:
    An internal tables is declared and the two fields (VARYING field and NEXT field) were
    Included inside the internal table
    E.g.: In program SAPMZP02
    DO 11 TIMES
    •     VARYING STATION_STATE FROM STATION1 NEXT STATION2. “ECC6
    CASE SYST-INDEX.
    WHEN ‘1’
    STATION_STATE = STATION1.
    WHEN ‘2’
    STATION_STATE = STATION2.
    WHEN ‘3’
    STATION_STATE = STATION3.
    WHEN ‘4’
    STATION_STATE = STATION4.
    WHEN ‘5’
    STATION_STATE = STATION5.
    WHEN ‘6’
    STATION_STATE = STATION6.
    WHEN ‘7’
    STATION_STATE = STATION7.
    WHEN ‘8’
    STATION_STATE = STATION8.
    WHEN ‘9’
    STATION_STATE = STATION9.
    WHEN ‘10’
    STATION_STATE = STATION10.
    WHEN ‘11’
    STATION_STATE = STATION11.
    18. Error:
    Incase of the parameter QUEUE-ID Error,’ QUEUE-ID’ is neither a parameter nor a select option in program rsbdcbtc.’
    Correction:
    The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
    E.g.: In program Z_CARRIER_EDI_INTERFACE
    •     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
    •     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
    Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
    19. Error:
    Incase of EPC Error,’ Field symbol <TOT_FLD> is not assigned to a field ‘.
    Correction:
    This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
    The OS Note - 1036943 needs to be applied.
    Error:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
    Correct:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    Error:
    Constants : c_tab type x value '09' .
    Correct:
    Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
    Error:
    Data : begin of output_options occurs 0 . Include structure ssfcompop.
    Data : end of output_options .
    Correct:
    Data : output_options type standard table of ssfcompop with header line .
    Error:
    PARAMETERS : NAST TYPE NAST .
    Correct:
    PARAMETERS : NAST TYPE NAST NO-DISPLAY .
    Replace WS_DOWNLOAD and WS_UPLOAD by
    GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
    For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
    Issue:
    Moving data from one structure to another structure if those two structures are not compatible
    Solution:
    we should use move-corresponding or field by filed we need to move it.
    If database structures are different in 4.6c and ECC6.0,
    Then we should go with append structure concept.
    While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
    Also Check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
    Reward points if helpful.
    Regards,
    Ramya

  • Can you please explain in detail about the T-Code SM59

    Can you please explain in detail about the T-Code SM59

    Hi Raja,
    detailed explanation is already available over help.sap.com.
    For your ready reference check below links
    http://help.sap.com/saphelp_spm21_bw/helpdata/en/57/898009a859493a8bce56caaf0f8e13/frameset.htm
    http://help.sap.com/saphelp_webas610/helpdata/en/da/11df3a9b10355ae10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_snc70/helpdata/en/3f/7ffb40ef74f923e10000000a155106/frameset.htm
    Regards
    Jitender

  • Details about the seminar

    I want the details about the persons who are conducting the seminars from NI and also the recent tables of the NI seminars.

    NI Seminars happens worldwide. Maybe you could try to be a bit more specific.
    LabVIEW Champion . Do more with less code and in less time .

  • Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center ??

    Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center or can i call the normal support for my country ???

    For liscensing of iOS related hardware? You'd need to contact the Made For iPod Program.
    <http://developer.apple.com/ipod/>
    Their contact address is <[email protected]>

  • Know more detail about the Remote Support Platform for SAP Business One ?

    SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
    Enhancements planned in Remote Support Platform for SAP Business One 9.1
    RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
    RSP Processes and Reports adapted to SAP HANA Database
    With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
    But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
    What is Remote Support Platform for SAP Business One?
    The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
    The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
    Some Key Features of Remote Support Platform:
    Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
    Incident Reports against the issues identified which require attention of SAP Support
    Company Database Backup and Restore options
    Regular fixes of Company Database inconsistencies
    Check, Download and Install regular updates in SAP Business One
    Upload Logs and required files to SAP Support or to Partner Support on regular basis
    Some details about RSP Backup Management
    Schedule daily, weekly, and monthly backups
    Perform differential and full database backups
    Back up transaction logs
    Back up files to shared folders on a network
    System Status Report through RSP
    From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
    Database uploads only via RSP
    From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
    Microsoft Windows PowerShell Scripting
    In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
    To achieve the internet connection test, you must allow port 80 for the RSP external communication
    Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
    Set the correct proxy
    Disabling Windows firewall in the TP_link Wireless Configuration Utility
    Want to now More about It Click Here :   Remote Support Platform for SAP Business One

    SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
    Enhancements planned in Remote Support Platform for SAP Business One 9.1
    RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
    RSP Processes and Reports adapted to SAP HANA Database
    With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
    But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
    What is Remote Support Platform for SAP Business One?
    The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
    The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
    Some Key Features of Remote Support Platform:
    Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
    Incident Reports against the issues identified which require attention of SAP Support
    Company Database Backup and Restore options
    Regular fixes of Company Database inconsistencies
    Check, Download and Install regular updates in SAP Business One
    Upload Logs and required files to SAP Support or to Partner Support on regular basis
    Some details about RSP Backup Management
    Schedule daily, weekly, and monthly backups
    Perform differential and full database backups
    Back up transaction logs
    Back up files to shared folders on a network
    System Status Report through RSP
    From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
    Database uploads only via RSP
    From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
    Microsoft Windows PowerShell Scripting
    In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
    To achieve the internet connection test, you must allow port 80 for the RSP external communication
    Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
    Set the correct proxy
    Disabling Windows firewall in the TP_link Wireless Configuration Utility
    Want to now More about It Click Here :   Remote Support Platform for SAP Business One

  • Explain in detail about the operation of zerophasefilter.vi

    Description needed in detail.
    Thanks.

    I palyed with this some years ago.
    It runs off the idea that if you run a signal through a filter
    a) Only specific freq components of the signal will be passed.
    b) A phase shift that is on the order of the filter is introduced.
    When running the same signal through the same filter again,
    a) The freq components that passed before are still passed but the componenets that were removed in the first passed are not present so they are not remove.
    b) Another phase shift is introduced.
    The zero pahse shift filter runs the signal through the filter (you pick your favorite flavor) and then the signal is reflected about the Y-axis effectively reversing time. THe revers signal is run through the filter a second time but now the phase shift is is in the oposite time direction. This effectively cancels out the original phase shift.
    These are handy if you want to correlate a filtered event with an un-filtered event.
    BUT
    You do not get something for nothing (2nd Law of Theromdynamics).
    In getting better phase information you loose signal info at the front end and back end of the waveform.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Tecra A50 PT634E - Need details about the SATA controller

    Hi
    I'm looking for detailed specification of Toshiba Tecra A50 (PT634E-00800JPL).
    I need to know what is the version of internal SATA port.
    Is this SATA II or SATA III ?
    I want to change the hard disk to SSD and buy the most suitable one.

    Install freeware hardware diagnostic software like for example SANDRA Sisoft, Everest Home Edit or HWiNFO32.
    Such tools provide you all essential information about the built in parts and the HDD controller.
    Please post some feedback would be interesting to know what SATA controller details would be reported by such tool.

  • Need details about the Snap to Grid function

    I wanted to repair a problem in a guitar track, So I opened a new track and recorded over the problem. I though that with the Snap to Grid function I could slide the new version on the old track without having to worry about the region moving horizontally. That's what's happening, it is impossible to move the track without changing the timing of the track.
    Is it normal?
    Thanks in advance

    Install freeware hardware diagnostic software like for example SANDRA Sisoft, Everest Home Edit or HWiNFO32.
    Such tools provide you all essential information about the built in parts and the HDD controller.
    Please post some feedback would be interesting to know what SATA controller details would be reported by such tool.

  • Where can we find details about the different contributor types?

    I see a few members being designated as 'Copper' and 'Silver' contributors. Where can we find more details about these contributor levels?

    The initial ranks are based pretty much on post count only - (having been around for awhile I've seen the "progression"!) - Once you attain the Bronze ranking, other criteria come into play, and as Ann said, details are known only to the admins to prevent manipulation and "rank climbing" as it's been called.
    I gather it's some combination of post count, tag count, kudos received, solutions authored, and then some totally subjective criteria (how well you "play with others", general helpfulness, accuracy of information given, etc).
    The mods and admins do an excellent job of keeping this place informative, useful, and a pretty pleasant place to be.

  • When will we see details about the iphone 4?

    Anyone hear about when they are releasing more information about the iphone 4? Plans, pre-orders etc.

    "iPhone 4 will be available for pre-order to Verizon Wireless customers only, on a “first come, first serve” basis via VerizonWireless.com, on or around February 3rd 2011 – details to be confirmed a week prior by Verizon Wireless. New and existing customers can purchase in select channels on February 10th 2011."
    Funny they say ON OR AROUND wonder if it will be before

  • Details about the PSD file of a mobile application

    I have some questions or blurry ideas about the use of photoshop to design mobile applications, in fact I have a problem to choose the resolution for the new file is what I take 72px / inch oubien 160px / inch or 240px / inch?
    the size of the screen of my working interface:
    Do I selected a standard size of the mobile 800 / 480px or I done the artwork for each mobile screen? also same question for tablets?
    I want to know all about mobile apps design

    please, is there anyone to guide me

  • I forgot the answers I wrote that I opened the account and I can not do all sorts of things into account because it I can give you all the details about the accountant to believe me

    I forgot the answers I wrote that I opened the account and I can not do all sorts of things into account because it
    I can give you all the details of the account to believe me
    Please help me
    It's my account [email protected]

    Click here and request assistance.
    (75545)

Maybe you are looking for

  • High frequency bit pattern evaluation

    I am trying to use a 6601 counter/timer to count the bits in a high speed serial output from a linear encoder.  I've successfully used the counter/timer card to clock and reset the encoder, but I'm having trouble using my third counter input to corre

  • Error while Installing GUI .

    Hi all, I am getting errors while installing in GUI 6.40 in my desktop.   The following files could not be registerd.   C:\programfiles\frontend\sapgui\wdtfuncu.ocx.   C:\programfiles\frontend\sapgui\wdtlogu.ocx   C:\programfiles\frontend\sapgui\wdta

  • Vendor short payment

    good day all, we just recieved a notification from a vendor that the've bee short paid. on checking the system, everything seems to be in order: 1. there are no shortages in the amount processed during F110 execution, 2. F.13 was execured effectively

  • Certain Sites Blocked / Others Displayed Improperly

    Safari is blocking certain sites, such as www.apple.com oddly enough. The problem is intermittent, at times I'm able to get on the site. More frequently what happens is sites will load but the pages are improperly displayed, images don't load, text i

  • Printing same Smartfom using single click on PRINT for many employee no.

    Hi All, This is my first question that i'm posting in the forum, hope u dont disappont me. We made a smart form for HR-pay slip. It is working fine for one employee, but when a range of employees are selected it asks a print preview screen each time