Details about the PSD file of a mobile application

I have some questions or blurry ideas about the use of photoshop to design mobile applications, in fact I have a problem to choose the resolution for the new file is what I take 72px / inch oubien 160px / inch or 240px / inch?
the size of the screen of my working interface:
Do I selected a standard size of the mobile 800 / 480px or I done the artwork for each mobile screen? also same question for tablets?
I want to know all about mobile apps design

please, is there anyone to guide me

Similar Messages

Two questions about the PSD file format specicaition

I'm a programmer dealing with a project to parse PSD files. When reading the official file format specification, I found that some fields of the file are not clarified:
1. There is a rectangle structure containing 4 fields: top, left, buttom, right. I wanna know whether these 4 fields can be negative values and is there a rule that the buttom shoud be larger than the top and the right shoud be larger than the left
2. The PSD file contains a color mode section. But if the color mode is RGB, the color mode section contians no data but a 4-byte length field whose value is set to 0. This is true for files in RGB mode 8-bit channel. But after convert the files to RGB mode 32-bit channel using photoshop, the whole color mode section is no long exist.
These two questions may be somehow technical, I would be thankful if someone can give me a hand.

1) was covered in the documentation at one time. Yes, many of them can be negative, that's why they're signed values. Valid rectangles will have the bottom greater than the top, and the right greater than the left. But you can also have empty rectangles, and sometimes invalid rectangles (because the values don't matter).
2) Not sure what you're asking... color mode is just a single enumeration for RGB, CMYK, etc.

Could you pls give the details about the Unicode conversion during Upgrade

Hi,
Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
Waiting for quick response
Best Regards,
Padhy

Hi,
These are the few points i gathered during my upgradation project.
Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
So it is advised to keep a back-up of the existing system.
Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
Version Upgrade involves the following Steps.
Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
First copy the entire E4B system into the E1B System which is created for Version 4.7.
Apply the Version 4.7 CD provided by SAP over the E1B System.
Now check whether all the functionalities that was in E4B system works fine with E1B system also.
Thus the Version Upgrade involves two steps.
1. SAP Upgradation with the help of the CD
2. Manual Upgradation.
1. SAP Upgradation with the help of the CD
This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
2. Manual Upgradation.
This Manual Upgradation involves
2.1 Upgradation of Standard Objects
2.1.1 SPAU Objects
2.1.2 SPDD Objects
2.2 Upgradation of Custom Objects.
Upgradation of Custom Objects can be placed under the following three categories.
Unicode Compliance
Retrofit
Upgrade
Please Find below some of the common Unicode Errors and their solutions
1. Error:
In case of Translate Error; Dangerous use of Translate in Multilingual system.
Correction:
To correct the Error occurring on TRANSLATE statement use this additional statement before the Translate statement.
SET LOCALE LANGUAGE sy-langu.
This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is sy-langu, i.e. the log on language of the user.
2. Error:
In case of Open Dataset Error; Encoding Addition must be included.
Correction:
This Error occurs only when the MODE is TEXT.
To correct the Error occurring on OPEN DATASET statement use this statement instead.
OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
Where: dataset_name NAME OF THE DATASET.
Access INPUT or OUTPUT or APPENDING or UPDATE.
DEFAULT - Corresponds to UTF-8 in UNICODE systems &
NON_UNICODE in NON-UNICODE systems.
3. Error:
In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; Function module UPLOAD is flagged as obsolete.
Correction:
The FM GUI_DOWNLOAD/UPLOAD is used.
The variations to be made in the parameters of the FM:
1. Filename It must be of STRING type.
2. Filetype DAT is not used any longer, instead ASC is used.
3. Field Separator The default value SPACE is used, incase for a TAB separated file X can be used.
4. Error:
In case of CURRENCY/UNIT Addition Error; Use addition CURRENCY/UNIT when outputting.
Correction:
The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
To correct this error follow the following method:
WRITE: /3 'TOTAL',' ', TOTAL.
WRITE: /3 TOTAL, , TOTAL CURRENCY 2. --- Where 2is the Currency Key for Getting 2 decimal places.
5. Error:
In case of TYPE X Error; Variable must be of C, N, D, T or STRING type.
Correction:
We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
So the method to be followed is:-
1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
2. Declare the variable as Type C, and use the method UCCP(XXXX) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute HORIZONTAL_TAB of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
E.g.:
i) *DATA: TAB TYPE X VALUE 09, Tab character
CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
ii) * DATA: CHAR TYPE X VALUE 160.
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA CHAR TYPE C.
CHAR = CL_ABAP_CONV_IN_CE=>UCCP(00AO).
(Here 00A0 is the Hexadecimal equivalent of the decimal 160).
3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
E.g.:
CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
DATA : LF(2) TYPE X VALUE 'F5CD'.
DATA : BEGIN OF LF,
A1 TYPE C,
A2 TYPE C,
END OF LF.
LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
6. Error:
In case of the Character -Error; The Character -cant appear in names in Unicode Programs.
Correction:
The Character -(Hyphen) appearing in Variable names is replaced by the character _ (Under Score) for Unicode/Upgrade Compliance.
E.g.:
*wk-belnr LIKE bkpf-belnr,
*wk-xblnr LIKE bkpf-xblnr,
*wk-date LIKE sy-datum,
*wk-wrbtr LIKE bseg-wrbtr,
*wk-name1 LIKE lfa1-name1,
*wk-voucher(8) TYPE c.
wk_belnr LIKE bkpf-belnr,
wk_xblnr LIKE bkpf-xblnr,
wk_date LIKE sy-datum,
wk_wrbtr LIKE bseg-wrbtr,
wk_name1 LIKE lfa1-name1,
wk_voucher(8) TYPE c.
7. Error:
In case of The SUBMIT-TO-SAP-SPOOL Error; you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition.
Correction:
1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
2. Call the FM GET_PRINT_PARAMETERS:
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
3. Use the SUBMIT-TO-SAP-SPOOL statement.
E.g.:
     submit zrppt500
     using selection-set 'AUTO3'
     with res_no eq lo_rsnum
     with sreserv in preserv
     to sap-spool destination p_dest
     immediately 'X'. "print immediate
DATA: print_parameters type pri_params,
archive_parameters type arc_params,
valid_flag(1) type c.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
ARCHIVE_MODE = '3'
DESTINATION = P_DEST
IMMEDIATELY = 'X'
IMPORTING
OUT_ARCHIVE_PARAMETERS = archive_parameters
OUT_PARAMETERS = print_parameters
VALID = valid_flag
EXCEPTIONS
INVALID_PRINT_PARAMS = 2
OTHERS = 4
Submit zrppt500
Using selection-set 'AUTO3'
With res_no eq lo_rsnum
with sreserv in preserv
to sap-spool
SPOOL PARAMETERS PRINT_PARAMETERS
ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
WITHOUT SPOOL DYNPRO.
8. Error:
In case of Message Error; Number of WITH fields and number of Place Holders are not same .
Correction:
Split the statement after WITH into the same number as the place holder for that Message ID.
E.g.:
1. * MESSAGE E045.
MESSAGE E045 WITH '' ''.
2. in program ZIPI0801
     Start of change for ECC6
     message e398(00) with 'Could not find access sequence'
     'for condition type:'
     p_ptype.
message e398(00) with 'Could not find '
'access sequence'
'for condition type:'
p_ptype.
     End of change made for ECC6
9. Error:
In case of Move between 2 different Structures; The structures are not mutually convertible in a Unicode program.
Correction:
Make both the Data Types compatible and then assign the contents.
E.g.:
The statement move retainage_text to temp_text. Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
10. Error:
In case of no description found; add a GUI title.
Correction:
In this type of error gui title is generally missing so add a GUI title to the module pool.
11. Error:
In case of writing internal or transparent table
Correction:
Write individual fields.
E.g.:
WRITE: / EXT. --> EXT should be a character type field
WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
12. Error:
In case of combination reference table/field S541-UMMENGE does not exist
Correction:
Was due to error in reference table S541. TABLE S541 has errors
1)Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)
2)Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)
Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
And that of ZMKCODE (from ZACCODE to ATTR8)
13. Error:
In case of KEY does not exist
Correction:
The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
14. Error:
Incase of WRITE statement, Literals that take more than one line is not permitted in Unicode systems.
Correction: To correct this error, we need to align the spaces accordingly so that the statement doesnt go beyond the line.
15. Error:
Incase of Data statement, The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect..
Correction: To correct this error, instead of like in the Data statement, use type.
16. Error:
Incase of DESCRIBE statement, DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.
Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
CHARACTER MODE is added when the data object is of flat/ character type.
BYTE MODE is added when the data object is a deep structure.
Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
LENGTH clen IN CHARACTER MODE.
Where blen and clen must be of type I.
17. Error:
Incase of DO-LOOP Error, In Do loop range addition needed
Correction:
An internal tables is declared and the two fields (VARYING field and NEXT field) were
Included inside the internal table
E.g.: In program SAPMZP02
DO 11 TIMES
     VARYING STATION_STATE FROM STATION1 NEXT STATION2. ECC6
CASE SYST-INDEX.
WHEN 1
STATION_STATE = STATION1.
WHEN 2
STATION_STATE = STATION2.
WHEN 3
STATION_STATE = STATION3.
WHEN 4
STATION_STATE = STATION4.
WHEN 5
STATION_STATE = STATION5.
WHEN 6
STATION_STATE = STATION6.
WHEN 7
STATION_STATE = STATION7.
WHEN 8
STATION_STATE = STATION8.
WHEN 9
STATION_STATE = STATION9.
WHEN 10
STATION_STATE = STATION10.
WHEN 11
STATION_STATE = STATION11.
18. Error:
Incase of the parameter QUEUE-ID Error, QUEUE-ID is neither a parameter nor a select option in program rsbdcbtc.
Correction:
The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
E.g.: In program Z_CARRIER_EDI_INTERFACE
     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
19. Error:
Incase of EPC Error, Field symbol <TOT_FLD> is not assigned to a field .
Correction:
This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
The OS Note - 1036943 needs to be applied.
Error:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
Correct:
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Error:
Constants : c_tab type x value '09' .
Correct:
Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
Error:
Data : begin of output_options occurs 0 . Include structure ssfcompop.
Data : end of output_options .
Correct:
Data : output_options type standard table of ssfcompop with header line .
Error:
PARAMETERS : NAST TYPE NAST .
Correct:
PARAMETERS : NAST TYPE NAST NO-DISPLAY .
Replace WS_DOWNLOAD and WS_UPLOAD by
GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
Issue:
Moving data from one structure to another structure if those two structures are not compatible
Solution:
we should use move-corresponding or field by filed we need to move it.
If database structures are different in 4.6c and ECC6.0,
Then we should go with append structure concept.
While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
Also Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
Reward points if helpful.
Regards,
Ramya

Photoshop CS6 - Spot channels are not saved correctly in the psd files.

Hi,
I'm using Photoshop CS6 and something happent a few days ago....some Windows or Adobe update messed up everything...I don't know...
Here's how things are.
If I add to an image a couple of new spot channels (any Pantone color) and remove the informations from the CMYK channels (or not-the problem it's there anyway), I should have an image with 6 color plates (CMYK and the 2 Pantone). It doesn't happened anymore...
I'm using Corel to print the files and the previous saved files are fine, I have all the Spot colors there. Now, If I edit any file I've worked on before, and save it again, the spot colors dissapear when I'm importing the psd file in my Corel document. And if there is no information on the CMYK channels, I'm getting a blank image...
I hope someone will give me some ideas because I don't know what to do anymore...
Codrut

Right. It's not reading these new saved files correctly. The old ones are fine.
I forgot to mention one thing. I've got this CS6 as an upgrade and I still have the CS5 one running on the same computer. The CS5 version does the same thing...
Today I tryed again to open a PSD (CS6) with another CS5 version from another computer and came with an error message "Could not complete your request because the specified color book cannot be found". And the file didn't opened....
Who messed up my color book and how can I fix it?

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

Is it possible when saving the psd file to have an automatic jpg file saved at the same time?

My work involves preparing images for printing lightboxes and window installations. My clients require to pre-approve the photos before printing.
I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size. This makes it possible for me to add these to a presentation and and send them to my client.
Is it possible when saving the psd file to have an automatic jpg file saved at the same time? Or do I still have to do this manually?

If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette. You may be able to write a Photoshop that would do as save as Jpeg, And you should be able trigger its execution by setting up a Script Save event using the Script event manager. When You do a manual save the script should be triggered. I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event. I have only use open events.

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

There are a number of third party solutions for this. I just use Bridge, so can't recommend one in particular.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lot

The problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

I created an image in Photoshop and saved it as the PSD file. Now when I try and open it it says it is not compatible with my version. How could this be when I created it in this version?

That depends on why it won't open. Most of the time it means the file is corrupted and unlikely to be recovered. If you saved it right after adding or copying a LOT of layers - then it might just be the layer limit and we can attempt to recover it.

When using external editor, iPhoto does not re-import the .psd file

Hi,
I've just started using Photoshop Elements 6 as a more advanced editor in iPhoto. When I do the 'External Edits' wihtout adding layers etc. and re-save as a JPEG then the photo will re-appear in iPhoto as the edited file.
However if I do the external edit and add layers then save as a .PSD, then the file does not update.. I have to save the .PSD file in a desktop folder then import the file after.
Is there anyway to force iPhoto to pick up the .PSD automatically after an update if I save it to the iPhoto library?
Thanks,
Glyn

Glyn:
The folllowing might be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you import a psd file initially then you can edit it via the external editor, with or without layers, and do a normal save and iPhoto will recognize the changes.

Is there any possibility to see full details about the event?

ipad calendar:I have no chance to read the event location fully on my ipad. It is cut and finishes with "...", thus very important meeting number cannot be seen. Is there any possibility to see full details about the event?

Thanks for quick reply.
Looks like opened the event. Here is a screen shot, I marked the cut numbers with red cirsles.

I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD fil

I'm considering buying CC LR/PS package. My camera is Sony a7 - raw ARW. I've been editing using PSE10 and ver 8.7 of the external Adobe DNG converter. Will I be able to open the DNG files in LR with the edits preserved? Will I be able to open the PSD files in LR with the edits preserved? Any import/catalog etc issues between PSE10 and LR?

Lightroom has no problem reading DNG files. Whether the edits you have done to the DNGs you have originally edited in Photoshop Elements 10 I'm not sure. ACR edits made to DNGs are saved in the DNG file itself, as apposed to a XMP sidecar file, so LR should see those edits. At the worst you will get an exclamation mark in the upper right hand corner of the imported DNGs and clicking on that exclamation mark you will get a dialog box asking you to either import settings from disk or overwrite settings. you would select import settings from disk.

An error occurred while applying SQL script for the feature BackendStore. For details, see the log file

Hello
i got this error in step2
Error: An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][09_05_16].log'
here is full summary
> Bootstrap-CsComputer
Logging status to: C:\Users\administrator.RCC\AppData\Local\Temp\2\BootstrapFull-[2013_09_23][12_17_37].html
Checking prerequisites for bootstrapper...
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoBootstrapperOnBranchOfficeAppliance...prerequisite satisfied.
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Host name: lync.rcc.local
Disabling unused roles...
Executing PowerShell command: Disable-CSComputer -Confirm:$false -Verbose -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Disable-CSComputer-[2013_09_23][12_17_46].html"
Checking prerequisites for roles...
Checking prerequisite SupportedOS...prerequisite satisfied.
Checking prerequisite SupportedOSNoDC...prerequisite satisfied.
Checking prerequisite SupportedSqlRtcLocal...prerequisite satisfied.
Checking prerequisite WMIEnabled...prerequisite satisfied.
Checking prerequisite NoOtherVersionInstalled...prerequisite satisfied.
Checking prerequisite PowerShell...prerequisite satisfied.
Checking prerequisite WindowsIdentityFoundation...prerequisite satisfied.
Checking prerequisite SupportedServerOS...prerequisite satisfied.
Checking prerequisite NoUnsupportedWinFab...prerequisite satisfied.
Checking prerequisite SupportedSqlLyncLocal...prerequisite satisfied.
Checking prerequisite SupportedSqlRtc...prerequisite satisfied.
Checking prerequisite IIS...prerequisite satisfied.
Checking prerequisite IIS7Features...prerequisite satisfied.
Checking prerequisite ASPNet...prerequisite satisfied.
Checking prerequisite KB2646886Installed...prerequisite satisfied.
Checking prerequisite BranchCacheBlock...prerequisite satisfied.
Checking prerequisite WCF...prerequisite satisfied.
Checking prerequisite WindowsMediaFoundation...prerequisite satisfied.
Checking prerequisite SqlInstanceRtcLocal...prerequisite satisfied.
Checking prerequisite VCredist...prerequisite satisfied.
Checking prerequisite SqlNativeClient...prerequisite satisfied.
Checking prerequisite SqlClrTypes...prerequisite satisfied.
Checking prerequisite SqlSharedManagementObjects...prerequisite satisfied.
Checking prerequisite UcmaRedist...prerequisite satisfied.
Checking prerequisite WinFab...prerequisite satisfied.
Checking prerequisite MicrosoftIdentityExtensions...prerequisite satisfied.
Checking prerequisite SqlInstanceLyncLocal...prerequisite satisfied.
Checking prerequisite SqlInstanceRtc...prerequisite satisfied.
Checking prerequisite RewriteModule...prerequisite satisfied.
Checking prerequisite SpeechPlatformRuntime...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ca-ES_Herena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_da-DK_Helle...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_de-DE_Hedda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-AU_Hayley...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-CA_Heather...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-GB_Hazel...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-IN_Heera...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_en-US_Helen...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-ES_Helena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_es-MX_Hilda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fi-FI_Heidi...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-CA_Harmonie...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_fr-FR_Hortense...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_it-IT_Lucia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ja-JP_Haruka...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ko-KR_Heami...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nb-NO_Hulda...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_nl-NL_Hanna...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pl-PL_Paulina...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-BR_Heloisa...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_pt-PT_Helia...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_ru-RU_Elena...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_sv-SE_Hedvig...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-CN_HuiHui...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-HK_HunYee...prerequisite satisfied.
Checking prerequisite MSSpeech_TTS_zh-TW_HanHan...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ca-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_da-DK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_de-DE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-AU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-GB_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-IN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_en-US_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-ES_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_es-MX_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fi-FI_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-CA_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_fr-FR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_it-IT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ja-JP_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ko-KR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nb-NO_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_nl-NL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pl-PL_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-BR_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_pt-PT_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_ru-RU_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_sv-SE_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-CN_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-HK_TELE...prerequisite satisfied.
Checking prerequisite MSSpeech_SR_zh-TW_TELE...prerequisite satisfied.
Checking prerequisite UcmaWorkflowRuntime...prerequisite satisfied.
Installing any collocated databases...
Executing PowerShell command: Install-CSDatabase -Confirm:$false -Verbose -LocalDatabases -Report "C:\Users\administrator.RCC\AppData\Local\Temp\2\Install-CSDatabase-[2013_09_23][12_17_52].html"
An error occurred while applying SQL script for the feature BackendStore. For details, see the log file 'C:\Users\administrator.RCC\AppData\Local\Temp\2\Create-BackendStore-lync.rcc.local_rtc-[2013_09_23][12_17_54].log'
what should i do?
Please help me

Hi,
The issue may be related to disk read and write cache. Here is a similar case for your reference:
http://blog.kloud.com.au/2013/07/15/publish-lync-2013-with-2012-r2-preview-web-application-proxy/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Details about the JMS Producers/Consumers

Hi All,
I am new to weblogic server.
We are using weblogic server 11g .
I need clarification on JMS.
We configured a JMS to send the reports from application deployed from weblogic server( oN Windows) to another weblogic server(On OEL) in FMW. But the data flow not occurred properly.I want to check following points .
1)All producers and consumers details for ths JMS servers
2)To get the details about the messgae sent by producer and who is the consumers for the same.
3)To verify whether the JMS transfered the all messages to consumer or anythng dailed.
4)If messages were failed then details about the failure message.
5)How to verify the producer and the corresponding consumers are valid
6)Can i check the details from both the producer and consumer servers.
Thanks in advance.

Please see the announcement post at the top of this forum. It points to getting started information and various useful doc links.
Regards,
Tom

Details about the PSD file of a mobile application

Similar Messages

Maybe you are looking for