Details abuout upgration of 4.6B to ECC 6.0

Hi All,
if any one worked on up gradation project, please help me in this. Don't give link to SAP Market Place.
1. What are the steps/procedure to be followed in up gradation?
2. What are the precautionary measures to be taken?
3. How can we do Data Migration in case of upgradation that means down load the data(master data,open items data) from 4.6B and again upload using migration tools?
4. How can we solution manager ? Can we use any other customized tools for this? if yes what are they?
5. what is the meaning of Unicode conversion? what we have to do in this case?
6. while uploading is client has to taken separate license from SAP for ECC 6.0?
thanks & regards,
ramesh balivada

Hi,
Try this link:
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade]
Kumar

Similar Messages

  • Send BP Bank Details to ECC

    Hi,
    I am trying to send business partner bank details (Payment Transactions tab) from CRM to ECC via BDoc. I have maintained the data in transaction BP, but the BDoc fails to post to ECC with the following error:
    No batch input data for screen SAPLBANK 0100
    We do have the bank name set as mandatory in ECC (which is on this screen) but I also entered this in CRM as it is mandatory there too.
    Is there some set up I am missing on the BDoc side in order to populate the bank data?
    The BDoc went through successfully before I added payment information.
    Thanks in advance for any help,
    Cara

    You might have time dependency functionality activated in R/3 for business partner data. In that case system doesn't delete the entry, but changes validity of that entry.
    If that's the case, and if you don't want to use this functionality then you can switch it off in config - IMG > Cross application components > SAP Business partner > Activation switch for functions
    Hope this helps.
    Regards,
    Kaushal

  • Site(Plant) details from SAP IS Retail ECC 6.0 to XI

    Hi,
    Which is the idoc to send Site(Plant) details to XI, which is created in ECC 6.0 T.Code WB01, & hw to send the same to XI.
    Rgds,
    balaji

    closed

  • Vendor Excise Details report

    Dear All,
    we required Vendor Excise Details Report,which maintain in J1ID.Like ECC no,Excise renge no,CSt , VAT no ,PAN no ...etc
    Regards,
    Dishant

    Certain vendor excise details(chapter id,ecc no,excise regn) were available in J2I9 along with transactions
    or otherwise develop Z report using J_1I* tables.

  • MAKING PROFIT CENTRE MANDATORY FIELD IN ECC 6.00 AFTER GOLIVE

    Can we activate the Profit centre mandatory field for all the entries after the system gone live?.   The details are as under:
    1.     System : ECC 6.00
    2.     Document splitting activated without making Profit Centre Mandatory field.
    If we are going to activate now, system is throwing a very strong message of Data Inconsistency and informing us not to change the settings now.
    Is there any other way where in we can make Profit Centre a mandatory field.
    Appreciate if any one  who  worked on this / has knowledge on this please revert back on the solution.

    Hi
    You should raise an OSS message and take SAP's support...
    If you add any new dimension now, all the previous docs where PC was not populated would throw an error during clearing, payments, etc
    You might be having PC as a doc spliting char already, but if you did not make it mandatory, then chances are that some docs might have been posted w/o PC
    BR,Ajay M

  • View CRM transaction in ECC through document flow

    Hi ,
    we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
    Can any one please help on this?
    Regards,
    Sharf.

    This is all going to be custom development but here is the idea:
    In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
    Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
    FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
    Easwar Ram
    http://www.parxlns.com

  • View CRM document in ECC through document flow

    Hi ,
    we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
    Can any one please help on this?
    Regards,
    Sharf.

    This is all going to be custom development but here is the idea:
    In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
    Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
    FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
    Easwar Ram
    http://www.parxlns.com

  • Sales Area Data isnt replicating from CRM to ECC

    Hi Gurus,
    We are replicating some BPs of certain groupings from CRM to ECC.
    We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
    steps results are as follows:
    u2022     BP General Data is replicating without any trouble.
    u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
    Monitoring SMW01.
    The BDOC BUPA_MAIN ended with the following error:
    Messages for business partner 0007000362: Fill in all required entry fields
    Action already taken:
    After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
    Is there something I am missing here.
    Thanks for your help.

    Hi,
    Regarding debugging from CRM to R3. Please follow the below steps.
    There are 2 methods to debug the Business Partner (BP).
    First Method:
    1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
    2)     You can use transaction code SU01 to check User Type of User.
    3)     Deregister the Queue through SMQS.
    4)     Make changes to BP.
    5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
    Second Method:
    1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
    2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
    3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
    4)     Go to SMW01 and type /h and process the BDoc.
    5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
    If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
    And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

  • Enterprise Services for Invoice Details

    Hi Friends,
    Can any one guide me to locate correct SAP Enterprise Services for Customer Invoice Details?
    I found the following services on ES Workplace.
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=A8E094B330C211DA1503000BCDDC2565&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=
    How can we validate this is the right service or not? Is there any way to identify the tables and fields are involved in this Enterprise Service?
    Let me explain my requirement.
    External website (running on web sphere portal) wants to access  customer invoices/details from ECC through passing required inputs like customer number etc.
    For this requirement how do we approach on ES workplace and how to configure this service.
    How do I know the source Table and fields information related to that service.
    Is there any e-learning or web log for step by step for any ECC related services?
    Thank you.

    Hi,
    I'm not sure if it's the right one that you're looking but you can check it as follows...
    Using the URL that you've specified below (you'll see Software Component details), you'll also notice a where used link towards the top right hand side. Click on it, you'll start noticing namespace details.
    Use TCode SPROXY in the ECC system & go to the same Software Component & namespace & locate the Enterprise Service / Service Interface in question. Double click on it & then you'll see tabs (external view, internal view etc.). The internal view shows the internal Abap import/export parameters used in the proxy. On the properties tab, if you double click on the provider class you can drill down to the implementing code to see how it's implemented.
    There are some blogs & guides relating to navigating through the ES Workplace to find what you're looking for but a functional consultant in a specific area is in a better position to dictate whether the Enterprise Service is valid for a specific business function.
    Regards, Trevor

  • Process & tutorial to move rdata from ECC R/3 to SAP BW system

    I am looking for the process and tutorial in details how to move data from SAP ECC R/3 system to SAP BW system? Could somebody have any links or resources related to this task? I am searching in the SDN for a while but no luck. Thanks in advanced!

    Hi Anthony:
    You can find the necessary steps to extract Logistics information from SAP R/3 on the paper by Aakash Deep Arora and Nikhil Santosh Saxena.
    "Setting up Delta Process for LO Extractors for First Time Using Queued Delta"
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d019f683-eac1-2b10-40a6-cfe48796a4ca?quicklink=index&overridelayout=true
    Regards,
    Francisco Milán.

  • ECC upgrade

    we are performing the ECC upgrade with unicode conversion from 620 system which has db size 7.24TB
    1. do any one performed this on similar huge database?if yes give details
    2. since db size is high do we need to go for CUUC or upgrade with unicode in two projects
    3. how to calculate the downtime apart from the OSS note provided by SAP which is purely theoritical
    4. what are the major challenges during export,import

    Hi,
    I'm going to do Productive Upgrade from 4.6C to ECC 6.0 next week with a 7.4 TB Oracle Database and I have already done 5 tests using a copy from Production database let me give answers your questions:
    1. do any one performed this on similar huge database?if yes give details
    Yes, R/3 4.6C to ECC 6.0 on HP/UX 11 and Oracle 10.2.0.2.
    You will find upgrade info that says the database size is not that critical and this is true as long as you do some fixes before the actual upgrades (of course after real live test upgrades with a PRD copy). The last Upgrade test we did we achieved 7 hours and 31 minutes of downtime not including post upgrade that will be the longest part of the whole process. In our downtime we had to include a lot of support packages and this system has some specific industry solutions that makes thinks harder. The first test run used 117 hours. SAP assesment service is really recomended in this kind landscapes and they helped us to do some cleanup of unused tables or unused data that let us move in the second test to 20 hours and with some other investigation and trials by our own we achieve the final 7:31 time and espect to get a lower time during Production Upgrade because the PRD server and DB server are more powerfull . Downtime depends a lot in Hardware and here the servers are running on servers with 8 1.6 Itanium CPU's and 32Gb of RAM, EVA system for DISKS.
    2. since db size is high do we need to go for CUUC or upgrade with unicode in two projects
    I will strongly recomend to do it in two projects unless you have a long time that you could use to achieve all this in one step or in case your post upgrade is really short.
    3. how to calculate the downtime apart from the OSS note provided by SAP which is purely theoritical
    The only way to calculate downtime is to actually doing a test upgrade on a PRD copy. This is also what SAP people will tell you.
    4. what are the major challenges during export,import
    I can´t answer this as we did not went to Unicode.
    Good Luck during your upgrades,

  • Vendor product relation not transfered from ECC to APO

    Hi,
    I am new to APO.
    We are transferring the info records(me13n)  details from ECC to APO by CIF .
    But in APO system , when I check the product for the location(/sapapo/mat1)  it says the product is not created for vendor.
    but this details are present in info records in ECC.
    Hence currently, we are manually creating the products for vendor.
    Is there any BADI where all vendor-product link can be transferred

    Hi Rachel,
    You can use BAdI: /SAPAPO/CIF_ENHANCE_TPSRC (method CHANGE).
    Take a look at SAP Note:
    1873917 - CIF Purchasing Info Record - Product does not exist at
    Vendor location
    I never used that BAdI, but we made something similar. We made an enhancement some time ago to extend the Product at the Vendor Location. This was done for subcontracting at the time the PPM was transferred. I am not sure if this is your case, because you just mentioned that you needed for a vendor. If it applies, please check here:
    483358
    - Subcontracting: creating product masters automatically
    Kind Regards,
    Mariano

  • SAP ECC Service notification from CRM Complaint

    Hi,
    As there are some links and document are available to create the quality notification in SAP ECC from the CRM complaint, using action profile for this some setting also needed in SAP ECC QM, but as in ECC we already have the service notification (IW51) which is working fine, is there any option to create the service notification in SAP ECC instead of quality notification.
    Regards,
    Zafar

    Hi,
      In the notification type, insted of quality notification just maintain the service/PM notification type system will create the notification in SAP ECC.
    We also wanted some other details to be pass from CRM to ECC for that we have created a function module in SAP ECC which updates the notiifcation and then that function module need to be called in SAP CRM after the Create Notification FM in SAP CRM Action.
    Regards,
    Zafar

  • Want to upgrade GUI to ECC 6.0.

    Hi,
    I want to upgrade from GUI 6.40  to ECC 6.0.I just want to upgrade the GUI . and my R/3 is 4.7.

    Hi Poonam,
    You can upgrade to 7.1 without problems !
    Read SAP Note 26417 to check that all hardware and software requirements.
    Close all your duplicated Thread.
    [want to upgrade GUI to ECC 6.0.|want to upgrade GUI to ECC 6.0.;
    [upgration from 6.40 to ECC 6.0 GUI|upgration from 6.40 to ECC 6.0 GUI]
    [SAP ECC 6.0 GUI|SAP ECC 6.0 GUI]
    Please read [rules of engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
    Use [SAP GUI Forum |SAP GUI; for this doubts types.
    Lets make the SDN better we are responsible for this !
    Regards.
    Marcelo Ramos

  • ECC connectivity with HANA

    Hello Experts,
    We are working on SAP R/3 system. Now client wants to move to SAP HANA. (connection with R/3 and HANA is done)
    Currently, all the processing and queries are executed on R/3.
    The requirement is to either execute the queries on HANA and display the data on R/3 continuing the existing system OR to execute the reports on HANA and display them on R/3.
    I'm very new to this and have no clues about this.
    Please suggest if this is feasible. If yes then kindly suggest how.
    Any third party connector/extractor is required?
    Kindly explain in details, the steps that we need to perform.

    Hi Jitin ,
    we have 3 types of replication methods in HANA to extract data from any kind of source.
    1. Trrigger Based
    2. ETL Based
    3. Log Based
    Go through below links once provide detail document which method to use for ecc systems ..
    http://www.youtube.com/watch?v=rg-fqpuFqCU
    http://www.youtube.com/watch?v=oFhTD1tnuR0
    http://help.sap.com/download/multimedia/ebooks/ec/SAPHANAOverviewofDataReplication/story_con
    tent/external_files/04_SAP_HANA_Data_Replication.pdf
    Regards,
    Giri

Maybe you are looking for