Details for client on a WCS

Hello,
I would like to ask you a question related to the WCS, I have the version 5.2.130 ..
I wonder if it is possible that when I look for a client that is associated to some WLC, selecting the client, I get four tabs General, Statics, Location and History Association, could add another tab, but there it was that of Clients details Report? ?
Thank you very much
Greetings

I do not believe in 5.2 there is an option to edit the tabs as there is from the "Home" page.  I checked the latest 6.0 and do not see it there either.  If there is a need for customization I think that is a valid request for a PERS ( product enhancement request ) through your account team.

Similar Messages

  • Refresh rate for client tracking i WCS/MSE

    Hi
    I have a customer that have trouble with the update of the position of a client. Even if the clients walks across the whole building, the client will stay at the same place for several minutes. Is there any way to tune the refresh rate? When I push the load button in the map, the clients position will refresh, or it did when I was on the site, now they just test with an application.
    The setup:
    WiSM 7.0.220
    WCS 7.0.220
    MSE 7.0.220
    They use the API for MSE to get the location information to the external application, and that will show the information on a cisco 7925 IP phone.
    Do someone know a way to increasing the refresh rate?
    - Patrick

    From: Cisco Mobility Services Engine - Context Aware Mobility Solution Deployment Guide
    Jitter: Before the 5.2 release, MSE used to have Location Smoothening mechanism to track clients. Moving average was taken for clients, or, in other words, client movement was averaged. Starting with 5.2 software release, this whole
    mechanism has been replaced with “Location Filters.” Location Filtering is applied internally on a per client basis. MSE
    keeps track of which client moves and which is stationary, and it applies filtering accordingly. This reduces the overall jitter of the system. Location filtering is enabled by default.
    Perhaps you want to turn  location Filtering OFF for your application.

  • How to change the Client n user details for a model in Production

    Hello Friends,
                         I have an application which is calling RFC function module from SAP R/3.
    In development system while creating Model I have entered the Back end details like Client, User Name and Password.
    If I transport the application into Production, The Client and user name will be different. In this case How would I change the client n user name details.
    Do I have import again in Production. But does sounds a good idea.
    ThanQ for Ur time.
    Cheers.. Sam

    When you create Model first time, to import Interface of RFC you would need to logon into R/3. But once you are done with the Interface, your connection to R/3 will be determined by the client and UID details in JCo connection.
    Now when you transport your code from DEV to QA system, the JCo connection with the same name should be there. or else, you would need to create the same in the new server. I dont see a need to reimport the model. If that is the case, then developers would have to spend huge amount of time doing this job alone.
    Hope this solves ur problem.
    Regards
    Murali.

  • The business requires the ability for client to provide a remittance file detailing what invoices the single payment is to be applied to.

    The business requires the ability for client to provide a remittance file detailing what invoices the single payment is to be applied to.
    hi the requirement is we have 10000 sales orders for this sales orders only one invoice is created when customer pays the money to  this invoice(multiple line items in this single invoice) the remittance file should get  that what invoices that single payment is applied to

    Um, well looky here :)
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/cf6abdeb-a517-424c-bbef-050bee22a658/remoteapp-error-when-launching-dashboard-from-client-pc?forum=winserveressentials
    Grey
    PS: Has nothing to do with the price of eggs, but interesting ?
    http://www.windowsnetworking.com/articles-tutorials/netgeneral/host-remoteapps-windows-pcs-part1.html

  • Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

    Hi,
    I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
    Clients View
    Cl. Name City Crcy
    000 SAP AG Konzern Walldorf EUR
    001 Auslieferungsmandant R11 Kundstadt USD
    066 Test EarlyWatch Profiles Walldorf EUR
    I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
    Kindly help me.
    Kannan

    hi,
    ? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
    ? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
    ? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
    ? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
    ? Then click on the Remote Logon then we go to BW server give RFC – SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
    ? R/3 - B W - R/3
    ? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
    ? PC ?Flat file , DB ? Database
    ? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
    ? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
    ? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
    hope it helps u
    Ramesh

  • Details for 'Is Web service security available?'

    Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
    In component monitoring..for the integration engine its in yellow...
    Details for 'Is Web service security available?'
    Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
    can any one please help me out..
    Thanks
    sriram

    I have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
    In component monitoring
    For integration engine
    Details for 'Is Web service security available?'
    Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client) 
    In message monitoring
    Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
    Time Stamp Status Description
    2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
    2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
    2006-05-22 15:18:58 Success Message successfully put into the queue.
    2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
    2006-05-22 15:18:58 Success The message status set to DLNG.
    2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
    2006-05-22 15:18:58 Success SOAP: request message entering the adapter
    2006-05-22 15:18:58 Success SOAP: call failed
    2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
    2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
    Can any one please help me out.
    Thanks
    sriram

  • CERTIFICATION DETAILS FOR ORACLE DATABASE 11gR2 (11.2.0.3) with Oracle 9i AS.

    Hi,
    My client is planning to upgrade from 10.2.0.2 to 11.2.0.3 database(AIX 6L). Client having ORACLE 9I AS on different machine and connecting to 10.2.0.2.  I am trying to check the certification details for this. but could not able to.  Any references please?
    I gone through MOS certification, but could not find any thing related to this combination.
    I am in the way of checking further options as well..
    Regards
    DBA....

    Well, seeing as how AS 10g has been gone since 2009 Oracle Application Server 10g 9.0.4 & 9.0.4.x (Doc ID 295948.1) I'm not sure an older version would be supported.  Now, that's been superseded by an alleged lifetime support policy http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
    but that probably has a funny definition of who's life.

  • Details for ALE Message type 'INVOICE'  for intercompany billing ?

    Hi all,
    I have a requirement that i have to create the Invoice receipt for FI when the billing document is created ( VF01)  in the same client?
    Please provide me the details for this
    such as output type , process code and other master data settings that have to fill?
    Thanks,
    Vamshi.

    Hi prakash,
    Thanks for the reply and it is very helpful.
    But i am using message type RD00 and shall i use this?
    Else, please specify the details that i have to maintain to use RD04 clearly stap-by-step?
    Thanks,
    Vamshi.

  • Client tracking in WCS

    I have a wcs and found how to do rogue AP location tracking, but i haven't figured out if it is possible to show the location of a legitimate client connected on the network, without having a Cisco Location Appliance.
    Is this possible?

    Hi Jarrodpicha,
    yes this is possible, depending on the version of WCS (BASE or LOCATION) it will give you different accuracy. In the Base version simply select search > devices > clients. In the sidebar, choose All Clients in the Search For Clients By drop-down menu and click Search to display the Clients page.
    Click the username of the client that you want to locate. WCS displays the corresponding Clients ClientName page.
    To find the client, choose one of these options from the Select a Command drop-down menu and click
    GO:
    ? Recent Map (High Resolution)?Finds the client without disassociating it.
    ? Present Map (High Resolution)?Disassociates the client and then finds it after reassociation.
    When you choose this method, WCS displays a warning message and asks you to confirm that you want to continue.
    If you are using WCS Location, WCS compares the RSSI signal strength from two or more access points to find the most probable location of the client and places a small laptop icon at its most likely location.
    If you are using WCS Base, WCS relies on the RSSI signal strength from the client and places a small laptop icon next to the access point that receives the strongest RSSI signal from the client.
    Hope this help
    Cheers Mark
    *Pls rate all useful posts

  • 451 4.7.0 Timeout waiting for client input

    My organization is running Small Business Server 2008 with Exchange.  After installing Exchange users reported not reciveing emails from Comcast and a few other domains.  Looking at the logs, domains including gmail and comcast are unable to deliver email to our Exchange mailboxes.  They receive an error message like the following.
    Technical details of temporary failure:
    Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18).
    Other domains send just fine. Any ideas what is causing the 451 4.7.0 connection timeout error message?  The following is an example SMTPReceive log.
    2009-06-08T23:15:11.964Z,,+,,
    2009-06-08T23:15:11.964Z,,SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders,Set Session Permissions
    2009-06-08T23:15:11.964Z,,"220 remote.domain.com Microsoft ESMTP MAIL Service ready at Mon, 8 Jun 2009 16:15:11 -0700",
    2009-06-08T23:15:12.027Z,,<,EHLO smtp3.mail.com,
    2009-06-08T23:15:12.027Z,,250-remote.domain.com Hello [123.12.123.123],
    2009-06-08T23:15:12.027Z,,250-SIZE 10485760,
    2009-06-08T23:15:12.027Z,,250-PIPELINING,
    2009-06-08T23:15:12.027Z,,>,250-DSN,
    2009-06-08T23:15:12.027Z,,>,250-ENHANCEDSTATUSCODES,
    2009-06-08T23:15:12.027Z,,>,250-STARTTLS,
    2009-06-08T23:15:12.027Z,,>,250-AUTH,
    2009-06-08T23:15:12.027Z,,>,250-8BITMIME,
    2009-06-08T23:15:12.027Z,,>,250-BINARYMIME,
    2009-06-08T23:15:12.027Z,,>,250 CHUNKING,
    2009-06-08T23:15:12.105Z,,<,STARTTLS,
    2009-06-08T23:15:12.105Z,,>,220 2.0.0 SMTP server ready,
    2009-06-08T23:15:12.105Z,,*,,Sending certificate
    2009-06-08T23:15:12.105Z,,*,CN=remote.domain.com,Certificate subject
    2009-06-08T23:15:12.105Z,,*,CN=ecf-DOMAINSERVER-CA,Certificate issuer name
    2009-06-08T23:15:12.105Z,,*,,Certificate serial number
    2009-06-08T23:15:12.105Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,20,,*,,Certificate thumbprint
    2009-06-08T23:15:12.105Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,21,,,*,remote.domain.com;domain.com;DOMAIN.local,Certificate alternate names
    2009-06-08T23:15:12.355Z,,EHLO smtp3.mail.com,
    2009-06-08T23:15:12.355Z,,250-remote.domain.com Hello [123.12.123.123],
    2009-06-08T23:15:12.355Z,,250-SIZE 10485760,
    2009-06-08T23:15:12.355Z,,250-PIPELINING,
    2009-06-08T23:15:12.355Z,,250-DSN,
    2009-06-08T23:15:12.355Z,,250-ENHANCEDSTATUSCODES,
    2009-06-08T23:15:12.355Z,,250-AUTH,
    2009-06-08T23:15:12.355Z,,250-8BITMIME,
    2009-06-08T23:15:12.355Z,,>,250-BINARYMIME,
    2009-06-08T23:15:12.355Z,,>,250 CHUNKING,
    2009-06-08T23:15:12.433Z,,<,MAIL From:<[email protected]> SIZE=52018,
    2009-06-08T23:15:12.433Z,DOMAIN\Windows SBS Internet Receive DOMAIN,,,,,,,receiving message
    2009-06-08T23:15:12.433Z,,250 2.1.0 Sender OK,
    2009-06-08T23:15:12.496Z,,RCPT To:<[email protected]>,
    2009-06-08T23:15:12.496Z,,250 2.1.5 Recipient OK,
    2009-06-08T23:15:12.496Z,,DATA,
    2009-06-08T23:15:12.496Z,,354 Start mail input; end with <CRLF>.<CRLF>,
    2009-06-08T23:15:20.277Z,,451 4.7.0 Timeout waiting for client input,
    2009-06-08T23:15:20.277Z,,,Local
    2009-06-08T23:16:03.276Z,,451 4.7.0 Timeout waiting for client input,
    2009-06-08T23:16:03.276Z,,,Local

    I had a similar issue with fortigate firewall. I could not able to resolve this issue with fortigate. Fortunately I had a Cisco PIX firewall in my stock. Eventhough it is not a best practise I have replaced the fortigate firewall with Cisco PIX mail flow
    started perfectly without any issues.
    If any fortigate experts are seeing this forum please suggest what has to be done for solving this issue.
    I have escalated this case to fortigate and they resolved the issue by executing the following commands on the fortigate firewall.
    set tcp-mss-sender1452
    set tcp-mss-receiver1452
    Santhosh Sivaraman MCITP: Microsoft Exchange Server 2007/2010 | MCSE/MCSA

  • Forgot password for client 000 user DDIC

    We forgot password for client 000 user DDIC & SAP*
    please suggest any one how to recover the password
    Thanks in advance

    Hi,
    Pls refer below link explaining step by step details of activating SAP* user login.
    [http://forums.sdn.sap.com/thread.jspa?threadID=1497131]
    [http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm]
    Regards,

  • Trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

    trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

    Thank you guys for the quick answer! Muche appreciated
    I've tried all suggested solutions, but no luck :-(
    - tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
    also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
    Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation.  All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system.  Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog,  the Server Manager management tool, or the dism.exe command line tool.  For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
    http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
    > is not for 2012 R2.
    For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
    "SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
     I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

  • Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded

    Hi there,
    Please can anyone instruct me on how to set up Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded. Your help would be much appreciated.
    Kind regards,
    RocknRollTim
    P.S. I was redirected by a forum user off the Microsoft Community forum.

    Hi RocknRollTim,
    Agree with Jason. Using a script will be a better option.
    Just addition, for history of RDP Connections, please open Registry Editor and follow the path:
    HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default. Please check if find MRU registry items where the name (or the IP address) of the terminal server is kept in.
    Please also follow the path: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Servers. It contains
    the list of all RDC (remote desktop client) connections that have ever been established from this computer.
    When expand Server folder and select a node, you will see the UsernameHint key that show the name of the user connected by rdp.
    Please back up registry items to avoid unexpected issues before any operation.
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Thank you for responding back Justin Gu and I agree with both you and Jason Miller that a script can easily achieve this task. Thank you all for your help.
    Many thanks,
    RocknRollTim

  • ACE deployment with two interface for client side

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-fareast-language:EN-US;}
    In a ACE router mode deployment, I have a single context configured with two interface for server side and two interface for client side. In this situation how can we meet the demands of customers arriving from both networks? How can the ACE handle the client request if we configure one default-gateway to each network?
    Regards,
    Egomes

    Enable "mac-sticky" comand under each client inteface.
    It will ensure that ACE sends the response to the MAC address from which the request to the VIP was recieved.
    For more details
    http://cisco.biz/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/command/reference/if.html#wp1033275
    HTH
    Syed Iftekhar AHmed

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

Maybe you are looking for