Details for 'Is Web service security available?'

Hi i am working on scenario rfc to webservice.Its as secued webserivce i need to do ssl configuration.
In component monitoring..for the integration engine its in yellow...
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
can any one please help me out..
Thanks
sriram

I have already installed certificates on the j2ee engine & i have given the paramaters for keystore entry & keystore value.Still i have the same error
In component monitoring
For integration engine
Details for 'Is Web service security available?'
Communication error Proxy calls on the sender or receiver side are not permitted on the IS (client)
In message monitoring
Audit Log for Message: f614df00-e9e0-11da-95ef-0004ac577b32
Time Stamp Status Description
2006-05-22 15:18:58 Success The message was successfully received by the messaging system. Profile: XI URL: http://saptst01:51000/MessagingSystem/receive/AFW/XI
2006-05-22 15:18:58 Success Using connection AFW. Trying to put the message into the request queue.
2006-05-22 15:18:58 Success Message successfully put into the queue.
2006-05-22 15:18:58 Success The message was successfully retrieved from the request queue.
2006-05-22 15:18:58 Success The message status set to DLNG.
2006-05-22 15:18:58 Success Delivering to channel: ZCH_VERISIGNPPGR
2006-05-22 15:18:58 Success SOAP: request message entering the adapter
2006-05-22 15:18:58 Success SOAP: call failed
2006-05-22 15:18:58 Error SOAP: error occured: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter
2006-05-22 15:18:58 Error Exception caught by adapter framework: Peer sent alert: Alert Fatal: illegal parameter
Can any one please help me out.
Thanks
sriram

Similar Messages

Is Web service security available?

Dear Experts,
In RWB, when i click on Integration Engine(in component monitoring) i get a yellow triangle next to it instead of green. Result of self test says that
Is Web service security available?
"Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)".
Can u guys tell me the reason behing this.
Thanks & regards.

Hi,
Check if you have selected any security level for the WebService or may be it is across the firewall. Probably you need to install the related certificates and have to configure the SSL layer.
refer
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Use transaction STRUST to set up an SAP Web AS ABAP engine as HTTPS server. If not already done, you have to import a certificate generated by a trusted CA identifying the SAP Web AS. In addition, you have to enable the HTTPS port in the ICM (Internet Communication Manager).
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Thanks
Swarup

Configuration details for Adaptive Web Service

Hai,
I an importing adaptive webservice model but it shows the error
Exception on execution of web service with WSDL URL 'http://sapsrv02:50200/HelloBeanWS/HelloConfig?wsdl' with operation 'getHello' in interface 'HelloBeanWSVi_Document'
Please tell me the steps how to configure the logical destinations in Visual Administrator and should i want to create a DEFAULT_WS_METADATA_DEST as default meta data destination and DEFAULT_WS_EXECUTION_DEST as default execution destination and what is the URL should i give for it.
Can anyone please help me to resolve the problem.
Regards,
R.Jude Silvester.

Hi,
Refer these links,
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d076c662-8c0f-2b10-8ca4-e63c26e2e489
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/301ff0bb-74ca-2910-fa99-eae392695aad
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04308ed-62d5-2910-b3a6-c26771b1c78e
Regards,
Sunaina Reddy T

Web Service Security not configured on this component.

Hi Experts,
                       Before configuring the scenario, i went to RWB to check whether the comopnents are in active mode or not.
                              Integration Engine XID
                              Business Process Engine XID
                              Mapping Runtime XID
                              Adapter Engine XID
                              Integration Engines
                      All components are in Green mode Except Integration Engine, The Integration is in yellow mode
                       and shows the following details.
                     Details for 'Is Web service security available?'
                       Web Service Security not configured on this component.
Can you give the solution for this.

Hi,
                  1, While sending idoc from sapR/3 to PI , in r/3 sm58 shows the foll error:
"No service for system SAPQA,client 200 in integration directory"*
                           Even the Bussiness sytem pointing R/3.
From your initial post, it appears that you are using XID system and from above error, I believe you are trying to send the IDoc from QA system. R3 dev will communicate to PI dev, so verify the partner profile and ports in your IDoc Header settings.
                     2, When i execute the tcode sm58 in PI   it shows the following error:
                               "Syntax error in program SAPLSXI_AC_CACHE _REFERESH"
I am kinda confused how come sm58 tcode can show an error for this program, as sm58 is for checking the transactional RFCs and SAPLSXI_AC_CACHE_REFERESH is for XI Cache refresh for Alert Category. Might be some one else can explain this.
                     3, WHEN I EXECUTE THE tcode SXI_CACHE
                                         Under the *STATUS OF RUNTIME CACHE
                                                       Unable to refresh cache contents
                                                       Error during last attempt toreferesh cache
                                                         (red colour triangle leading above both)
Check this SAP Note 764176, might help in your situation.
Worth reading - http://help.sap.com/saphelp_nw04/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
                    4, Still there is no messages in Message monitoring.
Obviously because of error # 1, you are unable to send IDocs, how come you expect messages to reach PI ... strange, isn't it
Hope this helps.
Regards,
Neetesh

RWB - Integration Engine self test - web service security and proxy

Hi,
I am working with a new installation of PI 7.0. In the runtime workbench, under self test for integration engine, there is this error/warning:
""Details for 'Is Web service security available?'
Communication error: Proxy calls are not permitted on sender or receiver side on the IS (client)""
What exactly is the problem? Is there any additional configuration needed within PI to use proxies? We do not have the cryptographic toolkit installed. Is that nesseccary to work with proxies? We have done several other scenarios with RFC, MAIL, HTTP, etc and they work fine. If anyone else had this problem and managed to fix it, please let me know..
Thanks,
Lasya

You can ignore this error. It is simply a warning that says message level security has not been configured. Without message security too, you can do proxy communication.
But, if you want to configure messag level security, go through XI Config guide section 12.4.
Message was edited by: Jay

Topology.svc - Endpoints - Web Services High Availability

Hi,
I was recently performing some simple DRP tests before going to production and i faced some issues i never encountered before..
(followed
http://blogs.msdn.com/b/besidethepoint/archive/2011/02/19/how-i-learned-to-stop-worrying-and-love-the-sharepoint-topology-service.aspx for usefull commands related to enpoints)
My farm:
SP 2013 - CU August 2013
2 WFE (WFE1, WFE2)
2 App (App1, App2) : Most services started on both servers (UPSS on APP1, UPS on both) - Central Admin on Both.
SQL Cluster
At normal state the command : (Get-SPTopologyServiceApplicationProxy).ApplicationProxies | Format-List *
returns > ServiceEndpointUri :
https://app1:32844/Topology/topology.svc
(if i'm not wrong, this topology.svc can run on only one server at a time)
I stopped WFE1, no pb, the NBL (appliance) is doing the job.
Then I stopped the App1 and started to have some issues. (most enpoints not balanced to app2)
I run the job "Application Addresses Refresh Job"
Or launch PS command : Start-SPTimerJob job-spconnectedserviceapplication-addressesrefresh
Wait 20 sec.
A few endpoints are now on APP2 (MMS, Search), it seems to work, i reached my web page.
I ask a mate to try and he got the "sorry we encountered and error..." > Can't load user profile.
I refreshed my browser and got the same error.......
ULS review, I can see that some svc request (most about user, profiledbcacheService) are still on APP1 !!
A failure was reported when trying to invoke a service application: EndpointFailure Process Name: w3wp Process ID: 6784 AppDomain Name: /LM/W3SVC/93617642/ROOT-1-130445830237578923 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:e8315f8e5d7d4b1b90876e3b0043a4ae#authority=urn:uuid:164efb17f28c4d2d9702ce3e86f0c0e8&authority=https://app1:32844/Topology/topology.svc
Active Endpoints: 1 Failed Endpoints:1 Affected Endpoint:
http://app1:32843/e8315f8e5d7d4b1b90876e3b0043a4ae/ProfileService.svc
The command (Get-SPTopologyServiceApplicationProxy).ApplicationProxies | Format-List *
Still return me that my topology.svc is on
https://app1:32844/Topology/topology.svc
But App1 is down !!
If my understanding is ok: Normally, the internal round robin loadbalancer (Application Discovery and Load Balancer Service, started on all servers, not configurable) should manage this.
Application Addresses Refresh Job is running each 15 min. and refreshs available endpoints, using the topology.svc
But, the topology.svc called is always on APP1 which is down !
At this time, i haven't found why SharePoint is not detecting that APP1 is down and is not
automatically recreating a topology service on another available server.....
If you have any idea...your help is welcome :)
Regards,
O.P

Hi ,
For achieving Web Services High Availability, you need to make sure service-applications have more than one server to service them to increase back-end resiliency to a SharePoint server dropping off the network.
You can refer to the blog:
http://blogs.msdn.com/b/sambetts/archive/2013/12/05/increasing-service-application-redundancy-high-availability-sharepoint.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Custom Token For web services security

How can I implement a token based security for web services? I will return a
custom token which contains a session-id among others after a JAAS
authnetication. I want to pass this token for every web service invokation.
I want the serverside EJB methods to be authorized based the roles in token.
Any ideas or pointers on the possible solutions?
Thanks,
Vish

How can I implement a token based security for web services? I will return a
custom token which contains a session-id among others after a JAAS
authnetication. I want to pass this token for every web service invokation.
I want the serverside EJB methods to be authorized based the roles in token.
Any ideas or pointers on the possible solutions?
Thanks,
Vish

Pros & Cons for consuming web services in ABAP using ABAP PROXY

Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

Web Service Security with SAML - Invalid XML signature

Hello together,
we want to build a scenario where we want to use Web Service Security with SAML.
The scenario will be
WS Client (Java Application) -> WS Adapter -> Integration Engine -> WS Adapter-> CRM (Web AS ABAP 7.01 SP 3)
SAP PI release is 7.11 (SP Level 4)
We want to use the SAML Authentification from WS Client to PI and from PI to Web AS ABAP.
The SAML authentifications between the WS Client and PI works when there is no SAML auth between PI and CRM.
But we get following error at calling the CRM system when we want to communicate with SAML:
<E_TEXT>CX_WS_SECURITY_FAULT:Invalid XML signature</E_TEXT>
Has somebody an idea of the possible reason for the error.
Thanks in advance
Stefan

Error Messages in the Trace/Log Viewer:
CX_WS_SECURITY_FAULT : Invalid XML signature | program: CL_ST_CRYPTO==================CP include: CL_ST_CRYPTO==================CM00G line: 48
A SOAP Runtime Core Exception occurred in method CL_ST_CRYPTO==================CM00G of class CL_ST_CRYPTO==================CP at position id 48 with internal error id 1001 and error text CX_WS_SECURITY_FAULT:Invalid XML signature (fault location is 1 ).
Invalid XML signature

Web Services Security Problem

hi all,
I am publishling the BC4J Component(Application module) as a webservice. The particular web service method will be as follows. The method is returning the element object.
public Element getEmp(String searchString,String selectedItem, int pageNoInput)
return (Element)hits.writeXML(1,Row.XML_OPT_LIMIT_RANGE);
I am securing the web service by the instructions which are given in the following link
http://www.oracle.com/technology/products/jdev/howtos/1013/wssecure/10gwssecurity_howto.html
Then i am creating the proxy client. when i run the proxy client it gives me the following exception
javax.xml.rpc.soap.SOAPFaultException: SOAP must understand error: {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security
     at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:553)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:390)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
     at aptuitclient.runtime.ReviewProtocolAppModuleServiceSoapHttp_Stub.getEmp(ReviewProtocolAppModuleServiceSoapHttp_Stub.java:91)
     at bc4jaswebservice.server.webservice.ReviewProtocolAppModuleServiceSoapHttpPortClient.getEmp(ReviewProtocolAppModuleServiceSoapHttpPortClient.java:58)
     at bc4jaswebservice.server.webservice.ReviewProtocolAppModuleServiceSoapHttpPortClient.main(ReviewProtocolAppModuleServiceSoapHttpPortClient.java:44)
When i am removing the security for the web service it is giving the Element object.
The Problem is when i am securing the web service it is giving the above said exception.
Please help me regarding this... this is very urgent...
rgds
Parameswaran

Hello,
When you are using WS-Security you need to secure the client too. So in your case the client is the ADF Data Control.
The way you should configure your data control is documented here:
- Web Services Security and ADF Data Control
Regards
Tugdual Grall

Dynamic destinations for adaptive web service in webdynpro for java

Hi,
Please advice me on how to create dynamic destination for adaptive web service model in webdynpro for java.
Regards,
Patana

Hi,
If this is the case, then use the HTTP destination for this.
What you need to do is:
1. Create one HTTP destination in visual administrator at services-> Destinations. Provide HTTP url of the your web service and the security options.
2. Specify this HTTP destination in the code before executing web service model.
Write following code for that:
wdContext.current<node name>Element().modelobject()._setHTTPDestination(<Specify HTTP destination name>);
Then execute your web service model.
Now, whenever you want to change the server on which your web service is running, make change in the HTTP Destination in visual administrator.
Refer this link,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Sunaina Reddy T

Creating SOAP Receiver comm.channel for axis web service

Hi,
I created Soap Receiver comm. channel fro Axis web service like below:
*Target URL* : http://<IP>:<Port>/<x>/service
*User:* <user>
*Password :* <password>
*SOAP Action:* <target namespace>/method
when i drive PI Message that use Soap Receiver it get error below
I do same method for .Net web service, it runs properly.
How can i solve this problem?
Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B3004965647F340C997B5F2CC9EA7E22 Software Component 4CF44F80503211DEB2A0D3F40A194B29</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did all but nothing changed?
I have doubt about axis side. Because respose like below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
May be Soap Receiver setting for axis web service must be different.
Thanks.

Web Service Security using OpenSSO

Hi,
I have a question regarding the usage of the OpenSSO in order to secure web services.
I have read the documentation and it states the OpenSSO enables web service security.
However, in the docs the main scenario is where the WSC and WSP are protected by the agent.
In my scenario, I would like to use agents only on the WSP side, but leave the implementation of the client side open to the partners. Partners will have the interface from the OpenSSO for the authentication and saml token retrieval. The client will have to create soap by itself. This is the case since the WSC are to be standalone applications on client computers.
To set the actual question; what are web service interfaces that OpenSSO as a STS offers for authentication and saml token issuance. Is there same sort of a referential architecture for this case where only the STS and WSP can be configured and the WSC implementation of the WSS left to the partner. Any pointers and directions would be appreciated.
Thanks!

Hi
Thanks for your reply
I downloaded OC4J 10.1.2.0.2 and ran it as as a standalone server.
I read the blog you linked and made the changes to the web.xml for the webservice. All of which I was able to do using the property palette in jdev 10.1.2.1.0.
I deployed my webservice to my oc4j standalone server and it appeared as a new application. I editied the orion-web.xml for the new application manually.
When I point my browser at the webservice I get the test page which allows me to pass parameters to the webserive. I invoke the webservice (which does a HTTP GET according to the test page) and the webservice runs. No user and password is needed though.
What is the expected behaviour? I was hoping that the webservice wouldn't run until I supplied the admin user name and password
paul

Web Service security is not set up on this component

Hi Friends,
In RWB, when I click on component monitoring->Integration Engine, I got "Web Service security is not set up on this component"
I want to send message using soap adapter by encrypting and signing it. for this purpose I need to configure the Web Service Security.
Can someone please provide some documentation or link on how to set up this Web Service Security?
thankx

Hi,
there is a chapter - Security Configuration at Message Level
in XI config guide which specifies everything you need - this is what you need
so I hope no further explanations are necessary
Regards,
Michal Krawczyk

SOAP Request with Web Service Security

Hi masters of XI,
the Oasis standard for web services security saids that exists three levels of security for web services, at higher level is Encryption, middle level is signature and at lower level is authentication with username and password inside the soap envelope.
I need to do a SOAP Request signed with a X.509 certificate and username and password too in SAP PI 7.0 SP11. I can sign the request with X.509 certificate without problems but i can't authenticate the request with username and password in usernametoken element like saids the Oasis standard
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>XXXX</wsse:Username>
<wsse:Password>XXXXXXXXX</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
How can we send UserNameToken's elements inside SOAP web service envelope
signing with X.509 certificate also? There are any way to do it in the
receiver agreement or receiver SOAP adapter?
thanks.

Hi,
thank you very much for your answers.
I have solved the SSL comunication and i can sign with X.509 certificates. My problem is that in the SOAP envelope of resquest signed only travels the X.509 certificate and I need to send the username security token (wsse:UsernameToken) also.
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>XXXX</wsse:Username>
<wsse:Password>XXXXXXXXX</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
I can't find the solution to do it. The Netweaver documentation says that Netweaver is able to sign SOAP request with X.509 certificates and is able too for using UsernameToken as part of Oasis standard for web service security. In abap stack of NW you can assign a security profile to a web service call for signing the message or authenticate it with username/password inside SOAP envelope, but in java stack of XI i think that there is no way to do it.
This is my Request:
<?xml version="1.0" encoding="utf-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
    <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soapenv:mustUnderstand="1">
      <wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-71968700">MIIHdTCCBl2gAwIBAgIQOq4nmg5zi4NGsIGjPUZVuTANBgkqhkiG9w0BAQUFADCCAT4xCzAJBgNVBAYTAkVTMTswOQYDVQQKEzJBZ...8d4pAJYk=</wsse:BinarySecurityToken>
      <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#" Id="Signature-104376803">
        <ds:SignedInfo>
          <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
          <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
          <ds:Reference URI="#id-104309952">
            <ds:Transforms>
              <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
            </ds:Transforms>
            <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
            <ds:DigestValue>R6WE9gs+l496jHCgslgALWswEnE=</ds:DigestValue>
          </ds:Reference>
          <ds:Reference URI="#Timestamp-104310599">
            <ds:Transforms>
              <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
            </ds:Transforms>
            <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
            <ds:DigestValue>aiCTZ0WwiZQEv8zVmmf8GLu/bYA=</ds:DigestValue>
          </ds:Reference>
        </ds:SignedInfo>
        <ds:SignatureValue>YR9Q5oUA6kFFmPYOIOQPTOgTgapMbkmgdlDM/TZJ2CS8ENAntfsnmpEbpUgOPUVMkgaECog0OKvlADHP0HvJtPdm2NJljZNCCgrk3hlmmtkXkRauVuH5KRiHE5NeWT4+Uspp3ashebu0IuOO66zt4Q=</ds:SignatureValue>
        <ds:KeyInfo Id="KeyId-104377209">
          <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-104377346">
            <wsse:Reference URI="#CertId-71968700" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
          </wsse:SecurityTokenReference>
        </ds:KeyInfo>
      </ds:Signature>
      <wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Timestamp-104310599">
        <wsu:Created>2008-01-16T21:28:44.081Z</wsu:Created>
        <wsu:Expires>2008-01-16T21:33:44.081Z</wsu:Expires>
      </wsu:Timestamp>
    </wsse:Security>
</soapenv:Header>
And this is the request I need:
<?xml version="1.0" encoding="utf-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
    <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soapenv:mustUnderstand="1">
      <wsse:BinarySecurityToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" wsu:Id="CertId-71968700">MIIHdTCCBl2gAwIBAgIQOq4nmg5zi4NGsIGjPUZVuTANBgkqhkiG9w0BAQUFADCCAT4xCzAJBgNVBAYTAkVTMTswOQYDVQQKEzJBZ...8d4pAJYk=</wsse:BinarySecurityToken>
      <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#" Id="Signature-104376803">
        <ds:SignedInfo>
          <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
          <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
          <ds:Reference URI="#id-104309952">
            <ds:Transforms>
              <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
            </ds:Transforms>
            <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
            <ds:DigestValue>R6WE9gs+l496jHCgslgALWswEnE=</ds:DigestValue>
          </ds:Reference>
          <ds:Reference URI="#Timestamp-104310599">
            <ds:Transforms>
              <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
            </ds:Transforms>
            <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
            <ds:DigestValue>aiCTZ0WwiZQEv8zVmmf8GLu/bYA=</ds:DigestValue>
          </ds:Reference>
        </ds:SignedInfo>
        <ds:SignatureValue>YR9Q5oUA6kFFmPYOIOQPTOgTgapMbkmgdlDM/TZJ2CS8ENAntfsnmpEbpUgOPUVMkgaECog0OKvlADHP0HvJtPdm2NJljZNCCgrk3hlmmtkXkRauVuH5KRiHE5NeWT4+Uspp3ashebu0IuOO66zt4Q=</ds:SignatureValue>
        <ds:KeyInfo Id="KeyId-104377209">
          <wsse:SecurityTokenReference xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="STRId-104377346">
            <wsse:Reference URI="#CertId-71968700" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
          </wsse:SecurityTokenReference>
        </ds:KeyInfo>
      </ds:Signature>

<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="UsernameToken-104312926">
        <wsse:Username>xxxxxxx</wsse:Username>
        <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText"/>
      </wsse:UsernameToken>

<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="Timestamp-104310599">
        <wsu:Created>2008-01-16T21:28:44.081Z</wsu:Created>
        <wsu:Expires>2008-01-16T21:33:44.081Z</wsu:Expires>
      </wsu:Timestamp>
    </wsse:Security>
</soapenv:Header>

Details for 'Is Web service security available?'

Similar Messages

Maybe you are looking for