Details in develop view

Hi
Has anybody noticed that the image rendering in FIT mode of develop only shows "full detailed" when changing some adjustments?
When switching an image in develop module I first get a preview, which does not seem fully detailed. After changing any adjustment, the image renders with apparently more detail.
Bug or feature?
Kind regards
Thomas

Hey Thomas,
Not entirely sure what you're trying to do. I tried what you said you did, and mine is working fine.
Or is this related to the issue that people have posted before about sharpening, etc, not taking place until they zoom in/out?
What steps are you doing when this shows up? Two displays, one? Could you give us a sequence of steps to do that would show you the problem, so we can try it on ours?
Cheers!

Similar Messages

Detail seen different in Develop view and Loupe view

I recently took some aurora pictures, and was adjusting them to put in a slideshow, and noticed something peculiar, i.e., that the details seen in the Develop module are less than those seen in the Loupe view in the Library. This is true in several pictures. The Develop view (2nd picture) is smoother and shows fewer of the fainter stars than the Loupe view (first picture). I hope it shows in the pictures below, which I created by using the Snipping Tool in Windows.
Why is this the case?
The problem is that the Slideshow results in LR seem to be closer to the Loupe view than the Develop view.
The Exif information is as follows:
and the adjustments I made were:
and
I'm using the LR 2014 v 8.7.1, Camera Raw 8.7.1.
TIA.

Hi Michael:
You're right. When I magnified the view to 100%, the results in the two modules were identical, as you said.
It does, however, raise a practical difficulty for me. With these kinds of long exposure, high ISO pictures, if I zoom in to 1:1, I find it extremely difficult to make any adjustments because the noise is so high. I would basically set all the noise sliders to max, and the details to minimum. However, this results in overadjusting for noise and losing too much detail when the picture is viewed zoomed out to fit on a computer monitor as a slideshow. Usually, this is not a problem, but at the high ISO/long exposures of these pictures, I find it very difficult to work in the develop module at 1:1.

Loupe and Grid view rendering not as good as Develop view.

I recently see that while using LR 5.6 the images rendered in the loupe and grid views do not look nearly as good as the same image displayed in the develop view. I have screen grabs if you'd like to see them below. The Loupe and grid are not as saturated and the gradient in the sky is not nearly as smooth. If I bounce between 'E' and 'D' it is pretty obvious. Once in a while the 'E' (loupe) view looks the same. I'm afraid that I will delete an image based on what I see in the Loupe or do unnecessary edits on an image. When I exported to jpg, the images looked pretty good.
Grid:
Loupe:
Develop:

As far as what could be contributing to a difference, other than an actual bug:
LR Previews are stored as AdobeRGB JPGs, so Library previews go from LR-Internal color profile to AdobeRGB to Display color profile, whereas Develop previews go directly from LR-Internal color profile to Display color profile. If there are some colors that are outside of AdobeRGB then some conversion may occur. The conversion to 8-bit JPG is also probably adding banding that Develop wouldn’t show. There might also be Relative vs Perceptual color profile conversion differences occurring. I don’t know the specifics of which is used for the Adobe color profile conversion and whether what you’re seeing is outside the expected variations.
If you view at less than 1:1/100% zoom, especially with Fit or Fill, then small details that vary across the group of original image pixels that are displayed as one display pixel can be averaged differently due to differences in the downsampling algorithms used between computing Library file previews and computing Develop display previews where Develop’s is built for speed because it occurs in real-time after every slider movement, where Library previews are computed in the background and so can use a more accurate resampling algorithm. Usually this is only a difference in sharp/smoothness but it can also manifest as a difference in tone if there are lots of tiny noise spots getting averaged together inaccurately in Develop or more accurately in Library.
Since I can see only a tiny difference between Library and Develop on my monitor in this particular example, I can't imagine that small difference is enough to reject the Library version and accept the Develop version. Maybe you're seeing others with more differences?

Lightroom 5 is distorting my images in Develop view

When working on images in Develop, Lightroom 5 is distorting them. For example, let's say I'm looking at an image in Library view (fig.1), then switch to Develop view (fig.2) — the image is suddenly compressed horizontally (or stretched vertically, however you choose to describe it).
At other times, images get distorted and rotated (fig.3). And at other times, images were appearing as though a sharpen filter had been applied with accented highlights — but this particular distortion doesn't seem to be happening anymore.
This does not happen to all images in the catalog. I'm running LR 5.2 on a 15" MBP with 16GB ram and a 1.2TB fusion drive.
Any help is greatly appreciated. I'm late on a deadline beause of this, and other local (NYC) experts, as well as Adobe phone support, are as stumpted as I am.
fig.1
fig.2
fig.3

Did you find an answer? I'm having the same issue with LR 4.4. It didn't happen with 4.3
The only thing I've found to fix it is re-reading the MetaData file for each affected photo and it is taking forever.

Thumbnail view to Develop view... can I?

Hey all,
I must admit I am mystified by Lightroom's UI. But I am learning, slowly.
One thing I have not yet figured out is how to get efficiently from the thumbnail view to the edit ("Develop") views. So I am constantly switching. All day long I go:
1 - GO TO LIBRARY
2 - SELECT THUMBNAILS
3 - FIND THE IMAGE
4 - GO TO DEVELOP
5 - Do my thing (mainly crop and straighten)
6 - GO TO 1
This seems a lot of extra clicks. I would just like spend my time in one environment where I can do what I need, not constantly having to switch (twice for each image) from Library to Develop. Is there any way to do this? Is there a better workflow that I am missing?
I need the thumbnail view becasue I find the long ribbon useless. I come back with 400 pictures froma shoot and scrolling left and right in that ribbon is worse than useless: I get lost and it takes me more time that not doing it at all.
I am sure I am missing better ways to work. Any input appreciated.
Michael

Cmd/Ctrl+F11 opens the second display window, which can be configured to show a Grid view. Clicking on a thumbnail in the second window opens that photo into Develop module.

Lighroom 5.4 Develop View does not update when changing sliders

Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After going to "develop view" on any photo and changing the exposure or any other slider does not update the main view of the photo. It does however update the thumbnail in the film strip and the second monitor window correctly. I've tried everything I can think of:
(1) downgrading to LR 5.3 (which used to work)
(2) forcing 1:1 and standard preview regeneration
(3) uninstalling the re-installing Lightroom (both 5.3 and 5.4)
(4) Optimizing catalogue
(5) Removing the Adobe AppData folder
(6) Creating a brand new catalogue with zero photos, importing a single photo and trying to change exposure/contrast on that
None of these result in the develop view of the picture changing when I change the sliders.
Do you guys have any experience with this?

The chances of me suspecting monitor color profile causing bugs in LR was very slim. =)
So were mine, especially when only the view itself doesn't work, but all other stuff works fine. Well, I probably have really not good colour profile, luckly you can change it after the lr is launched - it won't cause the problem untill next restart (at least works for me). And hopefully once my calibrator arrives lr will work ok with its colour profiles..

Master/Details Relationship using View Links is not not population data

Hi,
I have problem in generating proper data in master/detail relationship using view links passing three parameters between two custom tables can guide me the steps and process how i will able to generate and acheive this requirement.
very urgent
Please suggest me

Without further details, I'd suggest reviewing the following Section of the Fusion Developers Guide:
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_masterdetail.htm#ADFFD758
I've done this many times without issue.

I have a task, that is i want to retrive the details from active directory based on name and i want show that details into grid view.

Hi All,
I have a task, that is i want to retrive the details from active directory based on name and i want show that details into grid view.
Can any one help how to start.
Thanks in advance!

Hi AnilKarthik,
You can get user details by name using DirectoryService namespace. Then you can create a DataTable to restore the information and then bind to the SharePoint GridView.
Here are some deatiled code demos for your reference:
how to get userdetails from Active Directory based on username using asp.net:
http://www.aspdotnet-suresh.com/2011/03/how-to-get-userdetails-from-active.html
How to get User Data from the Active Directory:
http://www.codeproject.com/Articles/6778/How-to-get-User-Data-from-the-Active-Directory
Using SPGridView to bound to list data in SharePoint:
http://nishantrana.me/2009/03/23/using-spgridview-to-bound-to-list-data-in-sharepoint/
Best Regards
Zhengyu Guo
TechNet Community Support

Creating master details application with views!

Hi All,
I have a requirement to create the master details with the views, but when I was trying to create the master details its asking me for Master Table name & detail table name. Here I am giving the master table name in place of detail table name I am using view but its not showing my view in query builder, my view is already there in the database
any idea why its not showing my view?
Thanks,
Suma.

Hi Claudia,
I am so sorry, but I do not check the Oracle forums every day. I am under presser, because have to relocate from Bulgaria to the USA through the end of November.
Shortly, any view could be updatable under many restrictions. I suppose, that is the reason for the errors. I don’t know what kind of connection you have between those two tables.
Under all these circumstances, I’ll offer you to build first a form on the base of the first table which all columns are used. Then you can test, refine, and finish all details about it.
Second, you can Create Page Computation retrieving the column (value, if any) from the second table.
Third, you should Create Page Process on Submit of type “PL/SQL anonymous block”, which will INSERT the calculated (entered) value into second table.
You gain:
1. Full power of ApEx to build automatically forms and reports.
2. Min. manual work.
3. You can use the select statement from the view to build your SQL query.
4. You are able to build and test that part of the application step by step.
Konstantin
[email protected]

Give me details about differrent views in generic extraction give details

give me details about differrent views in generic extraction give details such as database view, projection view, help view, etc please give detail

Dear Deba,
Projection view - Just retrieves some fields from a single table.
Help View - This is used for search help.
Database View - This is inner join view of one or more tables
Maintenance View - Helps in creating maintaining data of the application object. The data can be distributed among several tables
Data Base View:
A database view is defined in the ABAP Dictionary and automatically created on the database during
activation. Accesses to a database view are passed directly to the database from the database interface.
The database software performs the data selection.
If the definition of a database view is changed in the ABAP Dictionary, the view created on the database
must be adjusted to this change. Since a view does not contain any data, this adjustment is made by
deleting the old view definition and creating the view again in the ABAP Dictionary with its new definition.
The maintenance status defines whether you can only read with the view or whether you can also write
with it. If a database view was defined with more than one table, this view must be read only.
The data read with a database view can be buffered. View data is buffered analogously to tables. The
technical settings of a database view control whether the view data may be buffered and how this should
be done. The same settings (buffering types) can be used here as for table buffering. The buffered view
data is invalidated when the data in one of the base tables of the view changes.
Maintainance View:
Data that is distributed on more than one table often forms a logical unit, called an application object.
You should be able to display, change and create the data of such an application object together. Users
usually are not interested in the technical implementation of the application object, such as the distribution of the data on several tables.
You can maintain complex application objects in a simple way using a maintenance view. The data is
automatically distributed on the underlying database tables.
All the tables used in a maintenance view must be linked with a foreign key. This means that the join
conditions are always derived from the foreign key in the maintenance view. You cannot enter the join
conditions directly as in a database view.
A maintenance interface with which the data of the view can be displayed, changed and created must be
generated from the definition of a maintenance view in the ABAP Dictionary.
When the maintenance interface is created, function modules that distribute the data maintained with the
view on the underlying tables are automatically generated.
The maintenance interface is generated with the Transaction Generate Table View (Transaction SE54)
or from the view maintenance screen with Environment -> Tab.maint.generator.
Database views implement an inner join. You only get those records which have an entry in all the tables
included in the view.
Maintenance views implement an outer join.
Help View:
A help view is defined analogously to a maintenance view. Help views can only be used as selection
methods in search helps. Since the R/3 System cannot pass the selection directly to the database using
a help view, it must generate its own access routines. The database view should therefore be used as
selection method in preference to the help view.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Regards,
Ram.

Why dont run developer-viewer.ipa?

hi friend
ı created a folio and then I went to dps panel for other To prepare app. I did all the steps in the DPS panel.I downloaded the file, then the developer-viewer.ipa.After downloading the file ı wanted to run in ipad.I could see only the home page but when I run in iPad.
did not have any page other than the home page within the application.
There were only home page.When I run the application ipad'te reason why you can not see all of the project.
Also I have done the project in a zip up and down the 65 MB. but developer-viewer.ipa file 6 MB.
"Developer-viewer.ipa why when I run the file content is empty" Anybody can help me about the problem?
Thank you in advance for your help

hi thanks for answer,
I used the Multi-Issue App. ı have published folio ID is the same as used in dsp builder ID.I have checked title id and I can not find the problem about title ID.
ı can get developer-viewer.ipa but I can see only the home page but when I run in iPad.What can be a problem other than title ID?

The Push notification on developer-viewer.ipa

Do I confirm that the Push Notification works on developer-viewer.ipa?
I clicked Notify Button successfully on Folio Producer (Organizer) but nothing happend on iPad (developer-viewer.ipa).
I cofirmed the below link, but I'm not sure it works on n developer-viewer.ipa.
http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-push-notification.html
shimoawazu

Yes, I've tried already and work it.
Publish a new folio and try notify
//Felipe

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.

How can one develop "view only" client applications in Lookout?This is to develop remote monitoring without control functionality.
We have 10 Client Nodes in the field and we need two "View Only" functionality in Client machines located on Supervisory Desks.

I have done this. There are many ways to approach this but I will offer what I think is the easiest. This will work ONLY if you have been assigning security levels to your objects (objects that actually control devices in the field) greater than zero AND allowing a security level of zero to view all panels. When I develop interfaces I do this just for creating a non control client.
Basically, you remove all users from the Lookout client in the user manager. You will not be able to remove the built-ins, "Guest" and "Administrator". Now when the end users tries to login using his normal login he will be denied. Consequently, he will not be able to control. But, he will still be able to view all the information since a no login can view a panel with a viewing se
curity level of zero. You must ensure any pushbuttons that are used to open panels have a security level of zero.
Now you can copy this security profile by finding the lookout.sec file and copying it to another non-control client computer. In Windows NT this file is located in the system32 directory.
There are many other ways but I find this the easiest.
Regards,
Tommy Scharmann

Master-detail with dynamic view object

How can you create a view link with a view object that is dynamic? I have created a master-detail relationship on a UIX page. I change the master view object at runtime using a view definition and SQL and then I bind the view object to an iterator on a UIX page. I need the new dynamic view object to maintain the link between the detail view object. Is this possible?
The reason why I have to change the view object at runtime is because I am implementing a search module and the tables in the from clause can be modified at runtime so I need to have a dynamic view object.
Thanks,
Sanjay

After playing around with ViewObjectImpl's setQuery() method some more I found out that this solution might not work for me due to the following reason: when the user tries to sort a column in the result table, the original contents of the view object get executed instead of the run time query.

I would like to go back to my original solution that included creating a view definition based on the runtime query and then creating a view object from that which I bind to the RowSetIterator. The missing piece to the master-detail functionality is with the detail Iterator being in sync with the master. I have tried the following but I get a ClassCastException 
DCIteratorBinding detailBinding = ctx.getBindingContainer().findIteratorBinding("DetailIterator");
detailBinding.getViewObject().setMasterRowSetIterator(masterBinding.getRowSetIterator());

here is the relevant stack trace:
java.lang.ClassCastException
at oracle.jbo.client.remote.ViewUsageImpl.getImplObject(ViewUsageImpl.java:1829)
at oracle.jbo.client.remote.RowSetImpl.setMasterRowSetIterator(RowSetImpl.java:512)
at oracle.jbo.client.remote.ViewUsageImpl.setMasterRowSetIterator(ViewUsageImpl.java:1147)
at oracle.jbo.common.ws.WSViewObjectImpl.setMasterRowSetIterator(WSViewObjectImpl.java:1005)

Entry Details in Month View

Sometimes iCal will display the entire detail of an entry in Month view and other times it will truncate it. There seems to be no logical reason for this and it happens arbitrarily. Does anyone know how I can arrange it for the iCal monthly entries to appear in full? Thanks.

Hello Matt...
What the sales force can do is enter the city name as the first piece of information in the "Remarks" field on the Activity (if it is a meeting) and onwards they go. This standard can also help with some reporting using some SQL and such...
I asked this exact same question one time and received the answer there was no way to change the information on the calendar, but that was some time ago...
Take care - Zal

Details in develop view

Similar Messages

Maybe you are looking for