Details of photo showing up in Develop mode

hi everyone..anyone,
i imported images into LR3 and was about to close the catalog when i got a backup reminder popping up on my screen. so i did the obvious thing and clicked Backup. I later opened the catalog to find to my dismay, details of the each photo showing up in the Develop screen. This doesnt show when viewing in the Library mode though. so each photo has the following details showing on the upper left corner of the image
File Name-8. CR2
date and time
image size
Please how do i get rid of this unsightly details so i can work on the images? Help.
Forever grateful,
Naa

Press the [ I ] key once or twice.
It is the information that is available on demand for display when you press I for Information.

Similar Messages

Photos show up in edit mode but not in published site

I am using iweb 09 and paste 20 photos into a tempate and they show up in edit mode fine. When I publish the site locally all the photos are missing. What can I do to fix that?

Welcome to the Apple Discussions. On the premise that it's a damaged library that's causing the problem make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
2 - delete iPhoto's cache files that are located in the Home/Library/Caches/com.apple.iPhoto folder.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select last three options.
Click to view full size

The Navigator in "Develop" mode in Lightroom 5 doesn't show current photo

In Library mode, the Navigator does what I'm used to from previous versions of Lightroom -- it shows a preview of the currently selected photo. However, when I go into "Develop" mode, the Navigator chooses another photo from the collection I'm working on (always the same one, it seems) and shows that one. This is frustrating, because I like to use the Navigator in Develop mode to see previews of an edit I'm working on. It's also just nonsensical that it shows a different photo.
Is this a setting I need to set somewhere, or a bug?
Thanks!

john27rg wrote:
Michelle, where did you find that option? I have this problem as well with LR5, but can't find that option.
Edit > Preferences > Interface tab,
Checkbox in "Filmstrip" section

Lightroom 4 Bug: can only see photos in Library mode, not develop mode

This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders

This happened to me, too, after importing a couple older LR3 catalogs (upgrading/consolidating). I could see the photo in Library module but when I pressed "D" (single photo selected) I was getting the "no photo selected" error message--for every photo I tried. I wasn't able to open any photos at all in the develop module. (These were photos that were fine before installing LR4 and upgrading.) Photos were from imported LR3 and LR4 Beta catalogs.
I restarted and everything seems ok--for now!
So if you come across this thread with this same issue, restart and see if that helps. (Before restarting LR I optimized as suggested above, which did nothing for the "no photo selected" issue. And this isn't related to the parent folder issue, I left my photos in the same place and didn't have more than 3k photos in any of the parent folders. I read in other threads that people had the issue again after importing other catalogs. I'm about to do that so I'll report back.

Develop mode shows a blue background with a white box and white diagonals.

When I open the Develop mode the photo I selected is not displayed. Instead is a blue background with a white box and white diagonals. Can anyone help? Everything else appears to work. If I choose the Before and After view the photo shows in the Before but the blue screen in the after.

You should find the forum for whichever product this concerns and post your question(s) there.
Here is a link to a page that has links to all Adobe forums...
Forum links page: https://forums.adobe.com/welcome

Develop mode says 'no photo selected', so I can't edit anything.

After importing photos into LR4 I select one and hit the develop button and then the screen shows 'no photo selected.' So I can't edit anything. The ruler where images usually are in develop mode, below the main image window doesn't show any images either. I found that if I select an image in 'library' mode then click on 'book' mode and back to 'develop' mode, then the image appears and allows me to edit it. I don't get it. Is there are different way to access photos, am I doing something wrong?

You should be able to select a photo in Library and go straight to Develop. Anything else isn't normal behaviour. Don't have a straight answer as to why it would be otherwise. Are you rendering previews on Import? Is the drive fast?

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally.

When I take a photo or video in landscape mode, it will not play back or show in landscape with the phone held horizontally. i have an iPhone 5. I think this happened sometime after the last upgrade but I am not sure when. is there a setting on the phone that may have gotten changed somehow?

Slide your finger up from the bottom of the screen to reveal the Controls panel. One button controls orientation lock to prevent the screen rotating as you rotate the phone. You can toggle that control on and off as you need. Slide the panel back down when you are finished with it.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

Lightroom cc in the develop mode insted of showing the picture there is blue screen

lightroom cc in the develop mode insted of showing the picture there is blue screen

Try disabling the GPU option: Preferences>Performance tab.
Probability is that some other app has enabled a setting (FPS?) on the graphics card which causes Lightroom a problem. So disable the setting in Lightroom first, to get you going again, then you can try to figure out what needs to be changed on your system to get it working again.

Upgrade LR 1.7 to 4.2 - Library photos can't be opened in Developer mode?

I'm running Snow Loepard 10.6.8. I upgraded from LR 1.7 to LR 4.2 today, and chose to upgrade the catalog as part of that. This all went fine - no errors.
I can see all my old photos in Library mode, and when I click on any of them - I can do Quick Edits (or anything else allowed) in Library mode; however, LR 4.2 isn't leting me open the selected pic in Developer mode. What's going on? Baffled by this one.....hoping for simple answer.
Chaz

That seems strange Chaz, is ther any message?

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

Developer Mode Error: Stale Data -- Master Detail OAF Page

Dear Members,
I have created a simple master detail OAF Page by following the below steps:-
1/ Created a MasterEO
2/ Created a DetailEO
3/ Created a MasterDetailAO
4/ Created a MasterVO based on MasterEO
5/ Created a DetailVO based on DetailEO
6/ Created a MasterDetailVL (view link) based on MasterDetailAO
7/ Created an AM
7/ Attached the MasterVO and MasterDetailVL to the AM
8/ Created a simple Master Detail Page in which user can enter the master and detail records. After entering the details user can click on the save button.
Code in AM_
public void createHeader()
+{+
OAViewObject vo = getMasterVO1();
if (vo.getFetchedRowCount() == 0)
+{+
vo.setMaxFetchSize(0);
+}+
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
public void createLines()
+{+
OAViewObject vo = (OAViewObject)getDetailVO1();
if(!vo.isPreparedForExecution())
+{+
vo.setWhereClause("1=2");
vo.executeQuery();
+}+
vo.setWhereClause("1=2");
vo.setWhereClauseParams(null);
vo.executeQuery();
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
+}+
Code in ProcessRequest method of CO_
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("createHeader");
am.invokeMethod("createLines");
I am facing the below error when trying to save the master detail records in the respective OAF Page_
Developer Mode Error: Stale Data_
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The number of displayed records, 1, exceeds the actual number of records, 0, in view object AstfAM.DetailVO1. Some of the displayed records may have been deleted.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
I request the members to help me in resolving the above error.
Many thanks in advance.
Regards,
R4S.

Hi user11991972,
I just faced the same issue and I managed to fixed it using this thread:
Developer Mode Error: Stale Data
In my case, I amended the "Change indicator" checkbox on some of EO attributes.
One of the master attributes was updated by the AM from the detail page, but when navigating back, the master page was not refreshed due to a customer requirement.
But I wonder if it could be of any help in your case...
Regards,
Olivier

Develop Mode 2nd Monitor not showing edit adjustments

I am using Lightroom 4.1 RC2 on a Windows 7 64 bit system with dual monitors. When I am in the develop mode and make edit adjustments on any setting the 2nd monitor does not update. If I move to another image then come back the image is updated but it does not work in real time. I have never had this problem before and it worked fine in Lightroom V4.0

It's a bug in LR4.1 RC2.
The workaround seems to be to increase the size of the Standard Preview setting (File Handling tab of the Catalog Settings)....go up at least one setting (e.g. if it's currently 1024 change it to 1440 or 1680). No need to recreate your previews, just increasing the setting seems to work in most cases.
You might also, without realising it, be suffering a fairly dramatic memory leak which is also stopped by changing the settings.
For a longer answer, see here:
http://www.lightroomforums.net/showthread.php?15591-Interesting-Problem-with-LR4-1-RC2

Develop Mode Auto Adjustments

Hello,
When I am loading RAW files in to LR, in the Develop mode they start off as a pretty flat image (as I shot them) but then LR slowly adjusts each photos as it loads which looks like it is bumping the saturation and contrast then lowering the exposure.
What are these auto adjustments and how can I turn them off? I would rather edit my images as shot in camera, not after LR makes its own adjustments without my help.

Ryan.Polei wrote:
This doesn't happen in Bridge
The difference: Lightroom is a raw editor, Bridge is not.
So, Bridge shows you what the camera did (if unedited raw file) instead of what it would look like with Lightroom edits. And Lightroom edits have to start somewhere, and that somewhere CAN'T be the same as the jpeg, or the same as another raw editing software (they use different settings, different software, different starting point..).
Don't get me wrong: I think Adobe should have better support for displaying embedded preview / sidecar jpegs (which is what Bridge does), and have an option to detect in camera profile setting and select a "nearest fit" Lightroom profile, but none of that will change the basic "deal" - different software, different settings, different starting point...
Note: this may seem odd to you now, but it's how all proprietary raw editors work, i.e. all those except the camera manufacturer's own (or those using the camera manufacturer's raw-rendering toolkit under the hood, instead of it's own), which emulates in-camera settings pretty-much exactly - no others can interpret a custom picture style, granted some may try to start with a somewhat closer look.
To review: all proprietary raw software does the same thing: interpret raw data according to invented algorithms and settings. That's what Lightroom software does, and that's what Capture NX2 does (and that's what your camera firmware does to come up with the jpegs), but they are different software, with different algorithms, which use different settings.
So your choices are:
* shoot jpeg
* use the camera manufacturer's software to process, or
* wean yourself from custom camera styles and learn to setup Lightroom processing instead.
PS - I recommend the later. Actually, you can use a plugin to somewhat translate camera settings to Lightroom settings, but I don't recommend doing it, because it tends to prolong your dependency on camera settings, rather than wean.
My advice? - Learn to use Lightroom (and get it set up optimally for your druthers) for post-production, and forget about camera settings whilst shooting (except for exposure and focusing etc., of course). Then, delete all the custom profiles you created in your camera, for therapeutic purposes .
Rob

Details of photo showing up in Develop mode

Similar Messages

Maybe you are looking for