Details required for these terms

Hi All,
can any body explain these terms in detail.
Main Attributes on item master window
i. Primary
ii. Tracking => - primary
- primary & secondary
iii. Pricing => - same as above.
iv. secondary => Defaulting
any response will be highly appreciated.
Regards
Asad

I think you might wany another forum. This is about portal specific topics, and yours looks like it's ERP functional.

Similar Messages

Table details required for pegged requirements

Dear All,
I have the following scenario.
One child components is required for three different header materials. After MRP run, In MD04, three diffenerent planned orders will be there for child component for three reservations of three Header materials. I want to see the immediate header level of the child component through tables for report purpose. If you see through the function module MD_PEGGING or MD_PEGGING_NODIALOG, it is showing the top most header material. But it is not showing the immediate header material for the child component planned order. Please guide me to get the immediate header material through table or function module or any.
Thanks in advance.
Vijay.

Check these tables.
MDTB,PLAF.

Help required for Payment Term change report in SAP BI

Dear Experts ,
I have got a client requirement to develop a report to present all the purchase orders for which there has been a change in Payment Term. Could any one provide his input as which extractor can give me this information or where can I get this data to capture changes in Payment Term in ECC.
Any suggestions welcome !
Regards
Anurag Krishna Dev

HI,
Purchase relavant information will be getting from
2LIS_02_ITM     - item level information
2LIS_02_HDR   - Header level information
2LIS_02_SCL   - schedule level information
find the below link hope it will help you get more idea...
http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/frameset.htm
Regards
BVR

Capacity requirement for long term planning and make to order planning

hello,
anybody please guide me.
my client using make to order scenarion and we are doing regulaly MRP run is MD50 with refernce to sales order.
sales orders planning will follow for 2 to 3 months.
at the same time my client wants to do long term planning also. to analize the capacity.
for that he is creatind planning scenario and multi level planning with MS02 also.
But the problem is when they are checking capacity requirement in cm38 it is showing only planning scenario load only. my client wants existing load and longterm planning load also. so they can plan the planning is sutibale in existing plan.
so how can i get both plan in CM 38or is there any other T.code to get that data.
please suggest me
Thanks & Regards
Bhakta

Hi Pierre and Rajesh,
When we create the simulation version, you have the possibility to choose the short-term planning. My point of view is, you can use the LTP fonction to do your scheduling for ex the next 3 months.
I think it's what Pierre did. Am I right ?
between to scheduling scenario to deliver my customer. With the simulation mode I can do my scheduling + use the MRP simulation to check if the raw material are available or not. Then use the MD04 to do the comparaison (or MS04 to compare between 2 scenario).
But I found 2 problems :
First : I don't find the parameters to show in the graphic MFS0, the planed fix order (I can only see the process order)
Second : When my scheduling is finished, I want to update my operational planning with the simulation version. But I don't want to do article by article : when you have 400 references (raw mat, packaging, finish goods) it's impossible (same issue like Pierre)
Have you found a solution for this 2 points ?

Details required for ssl certificate

Hi
u r going to be implement ssl on WEBAS. For this is it requires client certificates for ssl for the webbrowser .So if is it requires to renew.
regards...

Hi All,
got an answer from SAP Support and ICM restart isn't requrired anymore since >= NetWeaver 710.
Please see SAP Note 510007 - Setting up SSL on Web Application Server ABAP under:
When, as of NetWeaver 710, you save or overwrite an SSL PSE, STRUST signals the PSE change to the icman, whereby the PSEs used for SSL are reloaded at runtime. Existing communication connections are not impaired as a result. However, all SSL session caches are emptied in icman so that all new SSL connections go through a complete SSL Handshake. On servers with a very large number of simultaneous connections, this could lead to an increase in the CPU load and increased response times.
You are able to see respective information's as well at ICM trace.
Regards,
Jochen

Does BPM's required for these scenarios

Hi everyone,
Would anyone send me the steps for File-RFC-File and Http-RFC-FIle scenarios.
I created an Remote enabled function module with fileid and destination as import parameters and filecontent as export parameter.
My scenario is when i send the fileid as request, i should get filecontent as response to a file in xml format.
Do i need to do these scenarios in BPM, or can we do without BPM also.
Regards,
Varun

Hi,
Refer
Send RFC to SAP XI u2013
Send RFC to SAP XI Asynchronous
Ref: that
RFC Scenario using BPM --Starter Kit
the configuration steps will be;
1. 1 Sender agreement - Sender File CC
2. 2 Receiver Agreements - Recv. RFC CC and Recv. File CC
3. 3 Receiver Determination - File o/b -> BPM, BPM -> R3 (RFC) and BPM -> File (I/b)
4. Corresponding Interf. Detr. for the above Recv. determinations
HTTP to RFC - A Starter Kit
HTTP to RFC - A Starter Kit
thanks
Swarup

Pricing Details Required for Sales order Item

Hi Gurus,
I have a requirement to get pricing details of sales order line item to be displayed on smart form.
Please let me know the tables which i need to refer to get the pricing details. Please let me know how I can link those tables from VBAK or VBAP.
OR
Please let me know if there is any function modules to get the pricing details of sales order header / item
Regards
Avi

Hi,
Check with the below table
Table : VBRK, VBRP, VBFA, KONV tables.
In VBRK and VBRP you can link with VBELN field. In VBFA table you can link with VBELV fireld.
Regards
Thiru

Grant details required for user and schema

Hi
I have Oracle version - 10.2.0.4.0
We have Schema A (Lot of objects exist) and User B (No objects exist - acts as application user to access objects in other schema).
I have listed below doubts.
1) I want to know the method to find the list of users have access to objects in Schema A and privileges granted for the objects in Schema A
2) I want to know the method to find the list of grants provided to the schema objects to the user B

user1368801 wrote:
Thanks ajallen.
It really helped me.
one more question. I think DBA_TAB_PRIVS gives details for tables only right.
What about other objects like procedures, views etc. Go back to the Reference Manual and re-read the description of DBA_TAB_PRIVS. Re-read the specific description of TABLE_NAME.
>
Actually I am exporting 3 schemas (A,B,C) from production and importing them to test environment (A1, B1,C1) using fromuser and touser option.
Now I have to properly remap all the privileges, grants, synonyms etc.
There are so many objects and I am wondering how to remap properly.
It may be simple, as a newbie, your direction will be more helpful

The credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!, the credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!

after feeding in the correct details of my credit card and password, there still are some issues for which im not able to use the app's
kindly explain as to how to get out of this issue

i tried once again to get through but after i filll in the details of the credit card the expiry date and the password and all other details and press the continue option , it show an error on the top right hand side of the page which is "your paymant method was declined please enter valid payment method information'.

AIA Details required for begginer

Hi ,
I am new to AIA , i have bit knowledge on ESB and BPEL , Could you some can guide what is the best way to learn AIA ?
Tutorials and Installations process ...
Thanks in Advance
Sudhee

Hi Sudhee,
I would suggest you to go through the below link
http://www.oracle.com/technetwork/middleware/foundation-pack/learnmore/default-345261.html
This link contains the documentation as well as the samples of AIA Fusion Order Demo. This will definelty help u in understanding the concepts of AIA easier.
Thanks.

Requirements for IDOC

Hi friends,
Could you please tell me the details required for doign a IDOC scenario.
I want the details seperately when IDOC is a sender and also when IDOC is a receiver.
Note: High reward points for the reply

HI
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Idoc creation
IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
You can get the all description from below tcodes
WE60-> Documentation for IDoc types
WE09-> Search for IDocs by Content
BD87-> Status Monitor for ALE Messages
WE63 -- information about Standard IDOC in R/3
WE64 - Details about process codes
WE82, WE30, WE31 -- IDOC Types.
SAP R/3
R/3 to XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
XI to R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1) ( Create port to get IDOC Meta data from sender system)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) (To maintain IDOC Metadata, it is needed by XI because XI needs to construct IDOC-XML from IDOC. It is not needed by any sap system).
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
Details ABT IDOC??????
1)Use WE60 transaction.
2)you need list of basic type idocs then use t.code WE60.
To display IDOC list in particular time intervel use we02 or we05.
where u can find the outbound and inbound processing idoc's.
use t.code 'wedi' to get more information on idoc's.
3)You can use the WE60 for Idoc Documentation
& we can use WE30 for Idocs list
Refer the below links for furtehr assistance
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
cheers

Environemnt required for Installing essbase??

Hi
I am Planning to Install essbase in my Organization on Linux servers and Can some one help me out with prerequisites required??
Installing essbase 9.3.1
How many servers do i need??
Do i need one seperatley for shared services and one seperately for essbase server??
What is the ram required for these servers and we have to build application that will have a size of 40gb in future
Do i need to have 16 processors for each of the server??
Since the previous organisation i worked for had made their application run on 4 thred and each thread has 4 cpu'c??
I Had an idea to get Servers each with 32gb of ram with 16 cpus each
Can any one suggest me are these requirements sufficient or What are the Components i need to install on each servers
Is this the correct way of setting hardware??
Thanks
Kumar

Hi Atul,
Can you send me any document which gives the general information about the Configuration details for installing Essbase software.....
In your earlier reply, you have mentioned have that increment in CPU and RAM size does not result in increasing perforrmance. In application optimization way, I agree this is not helpful. But if hardware configuration is good, system performance will be better right...Please clarify me I am wrong.
Regards,
Upendra...

Goods receipt not required for freight items

Hi Experts,
We are using freight charge as extra line item in purchase order. Now client want that there shouldn't be any goods reciept if it is "Freight" item. I am thinking to use different material group or item category. Please advise if it is possible that if user enter PO number in MIGO then freight item should not appear (Based on material group or item category).
Also we are using quantity variance in Invoices, is it possible system don't block freight items as goods receipt is not required for these.
Regards,
Kamal

Hi,
For not receiving the goods with respect to freight line item in PO,
1. First uncheck the Goods receipt indicator in PO delivery tab,.
2. also uhchek GR based invocie verification in Invocie tab,
3. As GR based invocie verisfication is not activated system will not block for quantity variance.
Regards,
Bharat.

Minimum parameters and values required for 11g database

Hi
Can anyone please provide me with the list of parameters and the minimum value required for these parameters in 11g database (11.1.0.6.0).
Thanks

user8940828 wrote:
Thanks for your help
But this basic parameters did not mention the following parmeters . What can be the mimimum value that can be assigned to these parameters.
dml_locks
log_checkpoint_interval
log_checkpoint_timeout
open_cursors
open_links
parallel_max_servers
processes
session_cached_cursors
session_max_open_files
job_queue_processes
log_buffer
shared_pool_size
sort_area_retained_size
sort_area_size
db_cache_size
pga_aggregate_target
ThanksI suggest you to start letting the default parameters and then tune them step-by-step.
Eg:
- open_links => If you dont have database links you can avoid to set it.
- processes: number of backgroud processes + expected session/users for your application. if you have 1000 users connecting at the same time you would set a value higher than 1000.
- shared_pool_size, db_cache_size, sort_area_size, pga_aggregate_target are not mandatory if you use automatic memory management by Oracle.
- etc.

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

Details required for these terms

Similar Messages

Maybe you are looking for