Details tab in monitor screen

Can anyone please tell me in RSMO screen Details tab  we have
1. Request
2. Extaction
3. Transfer
4.Processing
5. subsequent processing
6. Datastore Activation
7.Subsequent update
8. process chain
9.others
What is the message each one of these giving us.

[Click here|http://www.sap-img.com/business/what-is-standard-transaction-code-rsmo.htm] - I think they give the best explanation.
I have excerpted below:
"In the details tab you will get the following information.
- R for Requests says whether the request is working in general ok or not
- E for Extraction says whether data received and scheduled. How many records are sent for extraction and how many are received for extraction.
- T for Transfer IDocs indicates how many data packages are there for extraction and how many records arrived in each data packages for extraction.
- P for processing indicates transfer rules, update rules and update and processing have any errors or not.
- P for Process Chain will indicate whether it worked ok or not if there is a process chain and load is successful or not.  "

Similar Messages

  • Regarding Updation of data in the detail tab of Monitor screen

    hai
    I got error in loading the data.
    I modified it in the PSA level.
    I will update that datapackage 'manually' in the detail tab of the monitor screen.
    Like that , i have 15-error datapackage and i modified them . Then how can i update all 15-datapackages at a time  in parallel ????
    Upto my knowledge , there is a funcation called
    Monitor screen->edit->init.update->settingforfutherupdate...
    Then i need to selct the "packet should be processed in background" 
    SO i dont know all of them ....
    pls tell me preperly
    i ll assogn the points
    bye
    rizwan

    hi Rizwan,
    try to update again entire PSA,
    rsa1->psa->locate your psa, and right click,
    there are option 'immediate' and 'schedule in background'.
    hope this helps.

  • Details tab of monitor tab

    hello all,
    When I go to the details tab of the monitor tab to do a simulation and update rule debugging, i get a timed-out error. It is taking a very long time.
    Any suggestions.corrections , please.
    Meps

    Hey Siggi,
    Thanks for replying.
    I'm not trying to see the records in PSA.
    In the monitor we have 3 tabs (header, Status and Details)
    I'm trying to go to "Details " Option and it is getting timed-out.
    regards, meps

  • What is the information we can get the through details tab in RSMO

    Hi to all,
    Currently I am working for P.support project, All of you well known about the importance of Details tab in rsmo screen. Here we have 4 options from where we can get more informaiton...
    1) Reqest
    2) Extraction
    3) processing
    4) Datapacket information..
    Any one of you pls explain briefly about these options. Any documents regarding these will help me a lot...
    My concern mainly about... How these ooptions are realated to each other...
    Thanks in Advance....
    Rgds,
    Venkat....

    R for Requests says whether the request is working in general ok or not
    E for Extraction says whether data received and scheduled. How many records are sent for extraction and how many are received for extraction.
    T for Transfer IDocs indicates how many data packages are there  for extraction and how many records arrived in each data packages for extraction.
    P for processing indicates transfer rules,update rules and update and processing have any errors or not.
    P for Process Chain will indicate whether it worked ok or not if there is a process chain and load is successful or not.
    Hope this helps please assign points if it does.
    Thanks
    A. Ramasubban

  • In Details of Monitor screen,why do we have Reconstruct process?

    Hello All
    Can anyone helpme out
    In <b>Details</b> tab of <b>monitor</b> screen,generally we have
    Requests
    Extraction
    Transfer
    Processing
    Subsequent Processing  and
    Datastore activation.
    But here additionally we have
    <b>Reconstruct
    Process chian
    Other?</b>
    Why do we have this additional 3 process
    Reconstruct
    Process chian
    Other?
    Actually from R/3 we are loading to 2 targets
    1.ODS
    2.Cube
    Its a Full Upload.
    and version is BI 7
    Regards
    Balji

    Hi Balaji,
    1. If you Reconstruct the Request from Manage screen of your Data Target,You will get the Reconstruct node in the Monitor screen.
    2. If the load Process is running through Processchain you will get Processchain node.
    3. Others is for ODS Activation.
    -Vijay

  • During Init -  Is this a error in Monitor Tab - Details Tab

    Hi BW Experts,
    When init is running from ods to Cube.
    In Status Tab : It is showing that "Request is still Running".
    In Details Tab :
    Overall Status :
    --> Requests (Messages) : Everything OK.
    --> Extraction (messages) : Missing Messages or Warnings.
    --> Transfer (IDOCS and TRFC) - Missing messages or Warnings.
            - Data Package 1: arrived in BW ; Processing : Selected number does not agree with transferred n.
    till
            - Data Package 20 : Same message
      --> In processing tab(data packed) ; Warnings received.
       - From Data Package 1 - 17 - (17921 Records) - Everything Ok.
      - From Data Package 18 - (17921 Records) - Missing Messages.
    In Monitor (left Pane) - 358420 records from 0 records.
    Can anybody tell me is this an error. Or the load is still running from 4pm to 9pm .
    Your instant and valuable answers are of great help to me.
    Thanks & Regards
    Sagar....

    Hi Vidya Sagar,
    Its not an error be patience.
    Loading is going on.
    You can check in SM37 whether load is going on or it went into error.
    Regards,
    Lakshman.G

  • Transaction ME21N Screen layout Item Details TAB settings

    Hi,
    ME21N transaction some of item details TABS are invicible. Like "Delivery address tab" is invicible. I want to make it visible/changeble to enter address for ship to.
    Right now I am looking into SPRO on screen layout settings and transaction SHD0 for screen layout variant.
    But I could not able to activate/visible of this particular tab.
    Help needed to make "Item detail delivery address tab" visible/change.
    Thanks,
    Deepak.
    Edited by: KDeepak on Apr 12, 2010 2:29 PM

    Hi Deepak,
    The path is SPRO -- Materials Management- PurchasingPurchase order- Define screen layout at Document level-field selection -ME21N-Reference item data
    In field selection screen for ME21N i.e.maintain table T162 -Field selection groups .Under this on the tab of Reference data ,item you have to mainatin as an optional entry for Delivery Address.With this delivery address tab will be visible for you under ME21N trancsction.
    Regards,
    Nitin Amritkar

  • Function Module  Error Message to appear in  Monitor-Detail TAB

    Hello ABAP / BW Gurus,
    how and can I write an error message in a function module
    that it appears in the detail tab of the monitor ?
    Thank You
    Martin Sautter

    OK

  • How do we find the previous error details in the monitor (details tab).

    Hi Experts,
    While loading data to a target via PSA we got an error (ex. data error), we edited in PSA and reloaded to target from PSA successfully.
    Here my problem is how do we find the previous error details in the monitor (details tab).
    Kindly post your comments on this......
    Thanks in advance.......
    Regards,
    Sankar Reddy

    Hi,
    While updating any request from PSA, you have to delete the first erroneous request from data target and then update the PSA request. If you do not delete the erroneous request, it will not allow you to update the PSA request.
    Regards,
    Yogesh

  • Monitor status Green buy in details tab reconstruction process is in red

    Hi,
    I am facing an issue with RSMO. It is master data load trough PSA. Some records are marked as error in PSA, while updating data to data target trough info package correct records were uploaded into target, error records not uploaded, but QM Status is green.
    If I check in details tab Reconstruction process has failed.
    We are working in BW 7.0 version, but data flow is still on 3.5.
    Patch level: 18
    Any inputs appreciated.
    Thanks in advance,

    Hi,
    Wht is the target here? Is there any data packet red?
    If u feel that all the packets are in green and processed u can change the status to green and leave it...
    and if the target is DSO and if the activation fails also under the details it'll give the same information...
    Once open the longtext of the red status where it is showing and chk..
    rgds,

  • Refreshing the monitor screen

    Hi all,
    I have an application built using
    CVI 5.5 where some where
    at the middle of the operation the
    program will call another program to lauch. After the called program has
    exit, my application will continue.
    My problem is that when the called program has exit, the whole monitor
    screen become white and I can't anything.
    Is there some way I can refresh the
    screen in CVI ?
    Thankz in advance.
    MK. Tan

    Hello Tan,
    The screen should not turn white when your called application exits. I would be suspicious that the called application is not terminating properly. Check to see if the OS has become unstable or locked up (move the mouse, press ALT-TAB, press Num Lock, press Ctrl-Alt-Del, and see if the system responds). I assume that you are using system() to execute this program synchronously. You could call fprintf() then fflush() directly after system() to write to a file to check if your program continues to run after the called program exits. If you restart and the file does not contain the marker, then you can be sure that the called application is not exiting cleanly. If you can give us more details on the application you are calling and the state of your syste
    m after it exits, we might be able to help you further. Also, does this behavior occur when the program is being debugged, a release executable, or both?
    Jeremiah Cox
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Error Message - in Monitor Screen

    Hello ,
    In the monitor screen i am seeing the error
    Data Package X : arrived in BW ; Processing : Data packet not yet processed
    Update PSA / Transfer rules / Update rules / Processing end OK .
    I am seeing Update ( 0 new / 0 changed ) : Errors occurred .
    I checked the other forum stuffs and came to know i need to process the data package manually .
    Is it correct .
    What about the other data package data .
    I mean if i do it manully the other data is updated to target and the request turns green .
    And the total data of all the data package i can see in the target
    I checked the dumps already nothing is there .
    Edited by: Rahul  Rai on Apr 6, 2009 5:22 PM

    Yes you can try to load the data manually package by package...
    For manually loading the data do the following:
    Go to RSMO for your request
    Go to menu Edit -> Init. Update -> Setting for further update -> Package should be processed in the background
    Then under the Details tab, go under Transfer (IDocs and TRFC), right click on each data package and select 'Manual Update'.
    This will need to be done for each data package...the request will turn green once all the data packages are processed
    Hope this helps,
    Sita.
    Edited by: Sita Pulavarti on Apr 7, 2009 11:20 AM

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • Changes to selected columns to display in Details tab in Task Manager are not saved during a reboot

    I use Task Manager on Server 2008 R2 to monitor performance. I have added several columns to the Processes tab using View..Select Columns. I have added CPU time, I/O read/write/other bytes, etc.
    The equivalent in Server 2012 is the Details tab. I figured out how to add these same columns - right click on the column headers, and choose "Select columns". This is not obvious by the way.
    However these selections are not persistent across a reboot. So every time I reboot, I need to add the columns back to the display. That is not the case with Server 2008 R2 - they are persistent.
    I am using a domain administrator userid, but not using roaming profiles.
    This is a retrogression vs. Server 2008 R2. Can it be fixed?

    Hi,
    I meant that both the added columns of Windows Server 2008 R2 and Windows Serve r2012 RC are persistent.
    You may install a new Windows Serve r2012 RC to check the symptom.
    Currently, you may perform a System File Checker (SFC /Scannow) to check the result.
    Regards,
    Arthur Li
    TechNet Community Support
    Arthur, I have the exact same problem as David Trounce.  The problem exists, as he described it, and I don't think you are understanding it.  Please pass this problem/bug/defect report to someone else so that it can be logged and fixed before
    RTM.  Thanks! -Kent

  • Vendor Master CIN Details Tab

    Dear All,
    Where will we do the field settings for the fields in Vendor Master CIN Details Tab?
    Points will be awarded.
    Thanks in advance!
    SAP FC

    Hi,
    U want the Cin tab on the vendor master rite.
    It comes on the address screen.
    In the spro under LG -- tax on goods movement---india...
    drop down and u have a place where we give ur user id ... (new entry) gv ur user id and put a star * and save.
    then when u create vendor master now u will get the CIN tab.
    I have no sap so i could not tell u the exact path.
    Thanks & regards,
    Kiran

Maybe you are looking for