Details Tabs rearrangement in Activity Transaction.

When an Activity Transaction is opend (Z Tranasctin Type) currently its opening with Survey Tab. We need Details Tab to be opened when a new Transaction is opened manually.
I tried SHD0 Transaction. In whch I tried to put Activitiy T Code as CRMD_BUS2000216. Its throwing an error saying Tranaction : CRMD_BUS2000216 is not known.
Can someone guide on this.
One more, We need these changes to happen only for this perticular Activity Type.

hi venkat
this is not any configuration problem
as i told you in above post
on the top of the screen there is tab named system
under this go to local settings.
what actually happened if the checbox for the option last transaction opened is checked,system always open the last transaction
and nature of system is such that if you unchecked that check box,the new transaction will always open up in the way last transaction is opened,
yes you are right here that when you click the details tab then it will always open up again in details tab
best regards
ashish

Similar Messages

Table name for Reason field in Details tab in CRMD_ORDER transaction

hi ,
kindly pls suggest me the table name for field Reason in Details tab of CRMD_ORDER transaction.
thanks

Hi,
You need to go via these four tables:
CRMD_ORDERADM_H
CRMD_LINK
CRMD_SRV_OSSET
CRMD_SRV_SUBJECT
/Anders

Transaction ME21N Screen layout Item Details TAB settings

Hi,
ME21N transaction some of item details TABS are invicible. Like "Delivery address tab" is invicible. I want to make it visible/changeble to enter address for ship to.
Right now I am looking into SPRO on screen layout settings and transaction SHD0 for screen layout variant.
But I could not able to activate/visible of this particular tab.
Help needed to make "Item detail delivery address tab" visible/change.
Thanks,
Deepak.
Edited by: KDeepak on Apr 12, 2010 2:29 PM

Hi Deepak,
The path is SPRO -- Materials Management- PurchasingPurchase order- Define screen layout at Document level-field selection -ME21N-Reference item data
In field selection screen for ME21N i.e.maintain table T162 -Field selection groups .Under this on the tab of Reference data ,item you have to mainatin as an optional entry for Delivery Address.With this delivery address tab will be visible for you under ME21N trancsction.
Regards,
Nitin Amritkar

Info req -- in sales order, item detail tab

hi all,
In sales order (VA01), Item detail tab,
1. what is the purpose of business transaction type field?
2. if click on the field, it will show list. so, where to create the list?

Hi
The purpose of that you have to go thro F1 and understand
The possible entries for that filed is defined in IMG activity T code OVE5
IMG--->MATERIALS MANAGEMENT->PURCHASING>FOREIGN TRADE AND CUSTOMS>BASIC DATA FOR FOREIGN TRADE-->DEFINE BUSINESS TRANSACTION TYPES AND DEFAULT VALUES
Regards
Raja

Details tab in monitor screen

Can anyone please tell me in RSMO screen Details tab we have
1. Request
2. Extaction
3. Transfer
4.Processing
5. subsequent processing
6. Datastore Activation
7.Subsequent update
8. process chain
9.others
What is the message each one of these giving us.

[Click here|http://www.sap-img.com/business/what-is-standard-transaction-code-rsmo.htm] - I think they give the best explanation.
I have excerpted below:
"In the details tab you will get the following information.
- R for Requests says whether the request is working in general ok or not
- E for Extraction says whether data received and scheduled. How many records are sent for extraction and how many are received for extraction.
- T for Transfer IDocs indicates how many data packages are there for extraction and how many records arrived in each data packages for extraction.
- P for processing indicates transfer rules, update rules and update and processing have any errors or not.
- P for Process Chain will indicate whether it worked ok or not if there is a process chain and load is successful or not. "

Monitor status Green buy in details tab reconstruction process is in red

Hi,
I am facing an issue with RSMO. It is master data load trough PSA. Some records are marked as error in PSA, while updating data to data target trough info package correct records were uploaded into target, error records not uploaded, but QM Status is green.
If I check in details tab Reconstruction process has failed.
We are working in BW 7.0 version, but data flow is still on 3.5.
Patch level: 18
Any inputs appreciated.
Thanks in advance,

Hi,
Wht is the target here? Is there any data packet red?
If u feel that all the packets are in green and processed u can change the status to green and leave it...
and if the target is DSO and if the activation fails also under the details it'll give the same information...
Once open the longtext of the red status where it is showing and chk..
rgds,

Capture Inv. Party under Details Tab of MIRO for auto line items

I am unable to get the "Inv. Party" in FBL3N for automatically generated line items. For example, the entries generated based on Tax Code is not capturing the information entered in Assignment field. The date of transaction in yyyymmdd format is being captured when FBL3N is viewed. The layout option doesn't provide "Inv. Party" to be selected though it is appearing in the Details Tab of MIRO.
I am presently maintaining the details of Vendor items from FBL1N for all transactions, get the data for a particular GL Code, say VAT credit due, then using Excel VLOOKUP to match and get the Vendor code to submit to tax authorities.
Is there any simpler way out?

Hi,
go through this...
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Thanks,
Shailaja Ainala.

Z partner function not available in details tab of PCUI

Hi gurus,
I have created a Z partner function in GUI and included in the determination procedure as well as in the z transaction type for opportunity. Included in the user interface setings as well.
In the details tab(PCUI) there are only 3 standard partner functions and the z partner functions are not appearing.
Can some one explain the procedure for getting those z partner functions in PCUI details tab.
Full points will be awarded if the solution solves the problem.

Hello Praveen,
If you add a Z partner function in your partner determination procedure, you will have it available in the partner tab but not on the information tab.
There is no 'customizing' way to replace the existing partner funcition (account, contact, employee) by a Z partner function or to add it.
To add it, you have to:
- create an append to the screen structure with the fields you want to display
- add coding in the read method of your MAC to display the value
- add coding in the modify method of your MAC to modify the value.
So, adding the fields in the structure is not enough. Moreover, you can add tehm in the tab linked to the screen structure but not anywhere on the application.
Regards,
Fred
Message was edited by:
Frederic Schoenaers

How to change label of tab 'Customer data' in transaction ME53N

Hi,
I need to change the label of tab 'Customer data' in transaction ME53N.
Please help me.
Thanks!!!
S.

Hi Sebastiano,
having the same requirement, I found this solution in some older postings: You must add a new Text symbol to the main program (which is SAPLXM02 for ME51N / ME52N / ME53N) of the customer-subscreen in order to rename the customer data tab in these Transactions.
Try the following steps:
1. call Tx SE38
2. open Program SAPLXM02
3. from the menu, call Goto->Text elements->Text symbols
4. Add a new Row for the subscreen dynpro you want to rename (e.g. dynpro 111 for item details in ME51/ME52N/ME53N), with Sym = dynpro number (e.g. 111 for item details) and Text = your new tab name
5 save & activate
This basically works the same for Transactions ME21N / ME22N /ME23N customer tabs, just open Program SAPLXM06 instead and follow the above steps.
Note: if you develop in multi-language environment, you might have to translate the text symbol.
I hope this helps.
Rudi
refer to:
[http://forums.sdn.sap.com/click.jspa?searchID=32160998&messageID=6937865|http://forums.sdn.sap.com/click.jspa?searchID=32160998&messageID=6937865]
[http://forums.sdn.sap.com/click.jspa?searchID=32160998&messageID=6147389|http://forums.sdn.sap.com/click.jspa?searchID=32160998&messageID=6147389]

Inventory active transactions

Hi Forum Friends,
I am writing a report to display the "active" transactions from "OINM".
What i am getting is all transactions including the ones that have already been offset.
I.e.:
Recevied 2
Recevied 2
received 4
issue       -2
issue       -2
total 4
What i'd like to see is just the 4 that are still on hand, not the ones that were in and out...
I don;t know if i am making any sense.... i hope i do.
Any suggestions?
Regards,
Manuel

I'll assume you know how to tell a receipt from an issue... My example will use > 0 to indicate a receipt, < 0 to indicate an issue.
This is gonna require arrays and some processing...
Sort the records by (warehouse, (whse location,)) transaction date. Then put a formula field in the detail section that looks something like this (basic syntax):
global rctdate(1000) as date
global qty(1000) as number
global lastindex as number
dim i as number
dim q as number
if {qty} > 0 then ' receipt; add to arrays
lastindex = lastindex + 1
rctdate(lastindex) = {trandate}
qty(lastindex) = {qty}
else ' Issue; relieve inventory
q = {qty} ' This is negative...
i = 1
while i <= lastindex and q < 0
    if qty(i) > 0 then
      if qty(i) + q >= 0 then
        qty(i) = qty(i) + q
        q = 0
      else
         q = q + qty(i)
      end if
    end if
    i = i + 1
wend
end if
Then, in the group footer, display the dates of what's left with:
global rctdate(1000) as date
global qty(1000) as number
global lastindex as number
dim i as number
dim out as string
out = ''
for i = 1 to lastindex
if qty(i) > 0 then
    out = out + cstr(rctdate(i), "MM-dd-yyyy") + wchr(10)
end if
next i
formula = out
And do something similar with the qty() array. Put the two formula fields side by side in the group footer, both with Can Grow set, and you'll get a list of receipt dates and remaining quantity in inventory.
HTH,
Carl

Enhance bank details tab in BP T-code

Hi
I would like to enhance bank details tab, how do i procceed?
I've been looking in BUPT transaction but I couldn't.
Thanks in advance
Regards!

Hi,
Refer this document,it will help you.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ad1b2-4151-2d10-67bd-b1a024f5cde8?QuickLink=index&overridelayout=true&48056389468007]
[http://www.****************/Tutorials/ExitsBADIs/BP/Index.htm]
Thanks and Regards,
Dhaya.G
Edited by: Dhayalinie Ganesh on Mar 9, 2012 5:16 AM

How to Make Assignment field in Details Tab Mandatory in MIRO

Hi Experts,
I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
Thanks In advance.

Hi,
check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
But make sure that then all your endors haven an sort key in the master data.
Regards,

How to Show Product Catalog in an Activity transaction

Hello Experts,
Normally a 'Product' or 'Product Hierarchy' can be associated with an 'Activity' Transaction Type.
Our requirement is to associate a 'Product Catalog' with an 'Activity' Transaction Type.
1. Any Inputs ?
2. How can it be done through Object Reference?
Many Thanks for the suggestions !!

Hi Ramalingareddy
For CRM 5.0 or CRM 2007 you can take a look at Best Practice guide C14 which can be located from here.
http://help.sap.com/
Click on SAP Best Practices Tab
Select: Cross Industry Packages
Select: Customer Relationship Management
Select: Release V1.52
Select: Technical Information
Select: Building Block Library
Regards
Arden

Add the country field in the main details tab of the CRMD_BUS2000126

Hi Experts,
I have the following business scenario : Need to display the country field in the Details tab of the PCUI activity application which normally appears under the Location tab of the application.
This is what I have done uptil now:
1) Added the country field in the screenstructure CRMT_BSP_ACT_DETAILS
2) Added the field in the field group ACT_OVERVIEW
3) Regenerated the field group
Problem is that the field still does not show under the details tab.
For your information :
   1) All the tabs including the Location tab ( only excluding the Details tab ) have been hidden from display.
   2) In the debug mode , I could see that the READ method of the class CL_CRM_BSP_IL gets the screenstructure CRMT_BSP_ACT_DETAILS with the country field added correctly , so I guess this is not a interaction layer / application issue. But after that the field gets lost in the framework layer.
Any expert suggesion for the steps as well as the likely solution is appreciated.
Thanks,
Sudipta

Hi Sudipa,
       As you said that in Devbug you can see that filed is added to your structure perfectly bit its not visible on your screen !!! Correct !!!!
        For this 1st check for standard screen varint is set for that screen or not.
    and try to tick ur new filed as visible in STD screen varints for that screen..
i am sure that it will get done after using varint.
Regards,
Amol Tambe
SAP CRM Technical Consultant.

Dispaly Fact Sheet in Activity Transaction

Experts please explain the steps to dispaly fact sheet in activity transaction in webUI?

Check the following SAPNote:
https://service.sap.com/sap/support/notes/1066280
Solution
PDF Account Fact Sheet in Activities can be generated in 2 ways. One is when the user saves the Activity and the other is when the user clicks on the button 'Attach PDF Account Fact Sheet'. In Order to generate PDF Account Fact Sheet in Activities the following Customising needs to be maintained:
1) Launch Transaction 'spro'
2) Navigate to Customer Relationship Management -> transactions -> Settings for Activities -> Attach Account Fact sheet to Activity
3) Here add the entries with the following details
a) Role
b) Transaction Type
c) Language
d) Save Check box (This check box indicates that the PDF is generated while saving the activity.)
e) Create check box (This check box indicates that the PDF is generated when the user clicks on the 'PDF Account Fact Sheet button' on the UI.)
Alternatively these changes can also be made via transaction se11, view 'CRMV_ACT_PDFAFS'.
Also please refer to the related note number 1040229 for Master Data Customising for the same.
Edited by: Dirk Boegelspacher on Oct 29, 2009 2:50 PM

Details Tabs rearrangement in Activity Transaction.

Similar Messages

Maybe you are looking for