Detect Add-on failure

Hi,
I have some add-on code that amends an A/R Invoice before SBO saves it. The problem is that if the add-on dies before the Add button is clicked the invoice is save without the add-on updating it. The add-on is set to run as Mandatory but SBO does no always alert the user in a timely manor. There have even been ocasion's when SBO thinks it's still running even though it has stopped. How can I prevent a Document from being saved if the add-on has terminated? The result of invoices being saved without the add-on amending it is extremely serious for my client.
Please help...

So the question is who watches Big Brother?
You can set a field in a user defined table when the Add-On is running to true. (When sbo start up you can set it to false). Then you can set up an alert (in Alerts Management) to read the field and alert the user that the required add-on isn't running....
Other than that SBO won't be able to notify a user that a add-on isn't running (except if the user checks it -which won't happen )

Similar Messages

  • Adobe Premiere Elements 12: Add Media Failure: The Importer Reported a Generic Error

    I am trying to add a MOV file to PE 12 I and keep recieving and Add Media Failure Error stating "The Importer Reported a Generic Error".  I have added other MOV files without any issue so I don't know why some MOV will work and others won't.  The only common characteristic I've found is that the MOV files that won't work are files that were recorded with my SLR camera. The location of the files I've added/tried adding are on my external hard drive.

    bunzondarun
    Try importing a few of the problematic files from a Local Disc C location like Videos and determine if problem presists. How is the external hard drive formatted, NTFS or FAT32?
    Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12? And, on what computer operating system is Premiere Elements 12 running? Are you running QuickTime and Premiere Elements 12 as Run As Administrator and/or from a User Account with Administrative Privileges?
    What specifically is the video compression for the problematic files? And, what is the brand/model/settings for the camera that is recording these videos?
    More later.
    ATR

  • Add media Failure

    I keep receiving an add media failure error message ... the importer reported a generic error.  I am trying to import from itunes.  Please help!!!

    There won't be since you are in PRE Editor. The option I mentioned is in Organizer. If your import is failing in PRE, you will get the best advise on http://forums.adobe.com/community/premiere_elements.
    Thanks
    Andaleeb

  • Receive: "Add Profile Failure: Invalid Profile XML" error when adding WWAN profile - Windows 7

    I'm trying to import below XML profile to Windows 7 machine and no matter what profile i use (even the one it was on that computer originally it gives me an error.
    Command:
    netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
    test.xml is in c:\temp folder.
    <MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
    <Name>TestProfile</Name>
    <IsDefault>true</IsDefault>
    <ProfileCreationType>UserProvisioned</ProfileCreationType>
    <SubscriberID>01.........................00000</SubscriberID>
    <SimIccID>89480............9713302</SimIccID>
    <HomeProviderName>02</HomeProviderName>
    <AutoConnectOnInternet>true</AutoConnectOnInternet>
    <ConnectionMode>manual</ConnectionMode>
    <Context>
    <AccessString>Internet</AccessString>
    <Compression>DISABLE</Compression>
    <AuthProtocol>NONE</AuthProtocol>
    </Context>
    </MBNProfile>
    Tried these steps:
    - configured the setting using UI and test connection - it worked.
    - copied that profile from path: C:\ProgramData\Microsoft\WwanSvc\Profiles to
    c:\temp and renamed it to test.xml
    - closed the connection and run command: netsh mbn delete profile interface="Mobile Broadband Connection" name=TestProfile
    - and then tried to add the profile under changed name (no profile changes made): netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
    - received very nice message: Add Profile Failure: Invalid Profile XML
    I'm stuck, help?

    Hey,
    Got an answer. It required some debugging, but I end up finding it.
    When you add that profile, system executes a function which compares Subscription ID tag with the one it has in system already. If one is already there then overwrites the profile, if NULL adds the profile. Problem is, as soon as any of
    the profiles are configured manually to redistribute later, the Subscription ID tag is encoded. And window doesn't know how to decode it, so it fires an error. 
    The Subscription tag is an IMSI number, when you right click it on your connection and go to properties, you will see it there, 15 digits. Copy it and paste it to the XML file replacing encoded number.
    It works as a charm.
    I leave deployment methods to you... :)
    Not so happy to answer my own question, but what a heck... glad to help even one person :)

  • How handle Add Media Failure Error: File Video Dimensions (Width/Height) Too Large?

    I am a brand new user of Premiere Elements.  I am using it for stop gap animation, bringing in digital still photos from my Nikon D3200.  I just attempted to bring in the first set of photos from the SD card.  I'm running Windows 7.   After loading the photos, an "Add Media Failure" box came up with the message "Error:  File Video Dimensions (width/height) too large".   Is something wrong with the width and height of the photos and if so what do I need to do to make it work?  There were 763 photos, but the message seems to refer to the height/width of each photo and not the total file size so to speak - right?  During the import process, the program prompted us to bring the photos in as images and not as videos -- so that is what we selected.  Thank you for any assistance.

    Photo Scaling for Video http://forums.adobe.com/thread/450798
    -Too Large May = Crash http://forums.adobe.com/thread/879967
    -And another crash report http://forums.adobe.com/thread/973935

  • Does Weblogic12c support Application Failover ? If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?

    Hi all,
    Need help to setup High Availability at my workplace, can somebody please tell that Weblogic12c support Application Failover ?
    If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?
    WebLogic Server - General@

    Hi there user,
    you can achieve HA in different levels:
    1. On a single machine - here you need to set up nodemanager. When started by nodemanager, any server failures will be detected and the nodemanager will try to restart it. OOME is an exception thrown by the JVM and the server state should go FAILED at some point then the NM will try to restart it. Nodemanager is the simplest HA solution you can and must implement for production environment;
    2. On redundant machine - you can configure WLS clustering, but you will need more complex environment, i.e. you will need a load balancer in front of the cluster to reverse proxy the requests. This scenario is can also use nodemanager to control the WLS instances on each machine
    3. Cluster with server/service migration - the most complex scenario where in cases of machine failure the WLS cluster can "relocate" resources (services and whole severs) to spare machines.
    In your case OOME should cause the JVM respectively WLS to be unresponsive, hence the nodemanager will detect this at some point and will try to restart the WLS.
    Hope this helps,
    A.

  • Detecting Dynamic Disk Failures?

    I can't seem to get a clear answer to the following issue.
    I've got a few systems in the field that are using Dynamic Disks to offer a RAID one solution, I know it's not the most ideal, since a real hardware RAID would be better. But humor me here. 
    Is there a way to detect a failure? I've had a few systems that ran into problems and have a failed dynamic disk. It's easy enough to fix, but is there any type of proactive notification that this situation has occurred? Can I somehow see it in the event
    logs (I can't seem to find any indicator)? 
    If anyone has any insights or tips?
    Thanks,
    Dower

    Hi,
    As far as I konw, Disk error checking could be run with task scheduler. That's to say, you can add disk error checking to Task Scheduler and specific the checking time and date.
    You can refer to the link below for more detail:
    http://www.ghacks.net/2011/09/04/how-to-automate-the-disk-checking-utility-in-windows-7/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please have a try on your computer for test, if you need any further assistance, please feel free let me know.
    Roger Lu
    TechNet Community Support

  • Problem detecting: add-on Maxtor IDE card on Solaris 10.

    Hi everyone,
    I am trying to install Solaris 10 -01/06- in a P3-700Mhz system.
    The motherboard is kind of old, it doesn't recognize my 20GB primary HD.
    So, I put a Maxtor IDE disk E-IDE controller card. It uses Promise Technology chip, full model name - Ultra 100 Tx2, chip model-PDC20268.
    The card is good, and it detects 20GB driver in bios.
    However, Solaris 10 doesn't seem to detect it. It keeps telling me "no disk found". so took me back to concole/dos screen.
    I read on some there post, saying there is jumper for the Maxtor RAID disk controller. I have to adjust it order to make detection to work. However, it is not a RAID card, just a normal IDE expansion card.
    I would like to ask for your help to see if Solaris 10 support thise type of add-on card.
    Thanks

    Hello Jason,
    there is no need to "low-level" format the drive. The manufacturer did the low-level format (and management of bad spots) for you.
    Have you tried to run analyze (either non-destructive or read-write) ?
    Probabably you just want to create a filesystem on the new drive (this is what Microsoft format does in the last step), use the command <b>newfs</b> instead.
    Michael

  • Detecting IP Multicast Failure in Flash

    I have implemented player with IP Multicast using Adobe flash media server . I have two multicast servers , so if one multicast server fails I want to play stream from another multicast server . But In case of IP Multicast a connection to server is never made so how can I detect a failure in that case inside flash player ?

    I would recommend taking a look at the Chromium database to see if this has been reported.  If not, please go ahead and open a new bug report.
    How do I report a bug against Flash Player for Google Chrome?

  • Add-on Failure

    Hey Gurus,
    We have developed an Add-on using the Add-on code generator wizard from the B1DE. The Add-on runs fine on machines, where Microsoft Visual Studio .Net 2005 is installed. But it crashes on the PCs, where .Net Framework 2.0 is installed properly and do not have Microsoft Visual Studio .Net installed.
    Below are the few information that can help you to track down the issue.
    System: SAP Business One 2005 A (6.80.318) SP:01 PL:10
    SQL: SQL 2005
    .Net Framework: 2.0
    Add-on created using: B1DE Add-on Wizard
    Error Message:
    System.Reflection.ReflectionTypeLoadException
    Message: "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."
    Source: "mscorlib"
    I did rebuilt the add-on using B1DE, copied my code in the new solution file and the Add-on worked for few days, now it started giving me the problem again
    Any help in this regards will be rewarded.. I mean will be highly appreciated..:)
    Thanks & Regards,
    ~Bibs

    Hi Edward,
    I have upgraded the system to PL 44 and did build the add-on but the error still persists&#61516;, after a detailed research I came to the solution that it is because of the crystal report used in my solution.
    After removing the crystal report and all its reference I was able to build my add-on and it is working fine. Now I don’t understand how to include the crystal report in my solution
    Any help in this regards will be appreciated
    Thanks & Regards,
    Bibish
    PS: I have used Visual Studio 2005 for my solution and have used the inbuilt crystal report of .Net for my reports.

  • B1DE Add-on Failure

    Hey Gurus,
    We have developed an Add-on using the code generator wizard from the B1DE. The Add-on runs fine on machines, where Microsoft Visual Studio .Net 2005 is installed. But it crashes on the PCs, where .Net Framework 2.0 is installed properly and do not have Microsoft Visual Studio .Net installed.
    Below are the few information that can help you to track down the issue.
    System: SAP Business One 2005 A (6.80.318) SP:01 PL:10
    SQL: SQL 2005
    .Net Framework: 2.0
    Add-on created using: B1DE Add-on Wizard
    Error Message:
    System.Reflection.ReflectionTypeLoadException
    Message: "Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information."
    Source: "mscorlib"
    I did rebuilt the add-on using B1DE, copied my code in the new solution file and the Add-on worked for few days, now it started giving me the problem again
    Any help in this regards will be rewarded.. I mean will be highly appreciated..:)
    Thanks & Regards,
    ~Bibs

    Hey Rob,
    Thanks for the reply.
    I did use the B1DE Add-on generator for my Add-on code and the wizard generated the correct and the latest dll i.e., B1WizardBase.dll.
    My Add-on works if i rebuilt a new solution and move the code from the old solution file to the latest solution.. But the problem persist after some days..
    I think I have mistakenly unmarked my post as normal post and no one wants to help for a post which will not give any rewards...???
    Regards,
    ~Bibs

  • OEM doesn't detect Servlet .init() failure!?!

    I'm trying to move some one-time initialization into a servlet .init() method and I wanted to see what would happen in OEM (Oracle Enterprise Manager) when this servlet's init() method failed (by throwing ServletException). I was hoping to see a Stop Sign or something...but instead OEM thinks everything is fine. Does anyone know how to make OEM aware of the actual state of the Servlets deployed under the OC4J containers it maintains?
    Bob
    package demos;
    import org.apache.struts.action.ActionServlet;
    import javax.servlet.ServletConfig;
    import javax.servlet.ServletException;
    import javax.servlet.ServletContext;
    public class MyActionServlet extends ActionServlet {
    public MyActionServlet() { }
    public void init() throws ServletException {
    super.init();
    ServletContext sc = this.getServletContext();
    sc.setAttribute("AppScopeAttribute",
    "sc.toString()=" + sc.toString());
    sc.setAttribute("MyInitParam",
    this.getInitParameter("MyInitParam"));
    throw new ServletException(
    new Exception("This sucks...that sucks...everything sucks")
    }

    Maybe if I format the source better someone will render an opinion? I'm looking for ways to have the Oracle Enterprise Manager detect and report on .init() problems in my servlets. Here is a sample servlet that does nothing but throw and exception at .init() time. How can I configure OEM to react to and report this condition?
    package demos;
    import org.apache.struts.action.ActionServlet;
    import javax.servlet.ServletConfig;
    import javax.servlet.ServletException;
    import javax.servlet.ServletContext;
    public class MyActionServlet extends ActionServlet {
      public MyActionServlet() { }
      public void init() throws ServletException {
        super.init();
        ServletContext sc = this.getServletContext();
        sc.setAttribute("AppScopeAttribute", "sc.toString()=" + sc.toString());
        sc.setAttribute("MyInitParam", this.getInitParameter("MyInitParam"));
        throw new ServletException( new Exception("This sucks...that sucks...everything sucks"));
    }

  • Network card no longer detected after hdd failure

    So yeah, my laptop's hdd crashed, I cloned it to another.
    It no longer detects my pcmcia card, model GCS2220.
    I tried chrooting the install from livecd and reinstalling kernel, still nothing.
    Odd thing is, before I chroot the card works fine, after chrooting ifconfig fails to work with eth0.

    Did you bind (mount -bind olddir newdir) /dev and mount /sys and /proc (I mean that's the place wherefrom ifconfig gets its information ) from the livecd's environment into ur chrooted environment ??
    Last edited by Onwards (2008-09-24 00:43:11)

  • Y-T-D Value Essbase Excel Add-in Failure

    <p> </p><div>This is very strange.  I have a valid intersection whereI can see current values in analyzer.<br><br>Yet using the excel add-in with exactly the same POV i getzero's.</div><div> </div><div>But it gets weirder.</div><div> </div><div><span class="054245302-15032006"><font size="2" color="#0000ff" face="Arial">If I change Jan to Jan in my column headeras opposed to Y-T-D (Jan)and leave the rest of the months Y-T-D(Feb)I get Jan data and miraculously Feb year to date data but the restof my Y-T-D months continue to retrive zeros.</font></span></div><div><span class="054245302-15032006"><font size="2" color="#0000ff" face="Arial">If I then change Y-T-D(Feb) to Febyou guessed it - I get Jan and Feb data and YTD(Mar) is now retrieving but none of the other Y-T-D months from Aprforwards.</font></span><br></div><div><br>Anybody ever seen anything like this? </div><div></div>

    I have tested again today, and it works fine now with Classic Excel Add In and with Smart View. (Sorry, I dont know what I did that was wrong).
    The only problem with SmartView is that the current release does not support hiding #Invalid rows.
    Philippe

  • Excel Add-In Failure

    I am trying to install ESS v.6.5 excel add-in but get "not recognizable file format" error when starting up excel for the first time after install. When I try to add the Essexcln.xll file manually, it gives me an "invalid add-in" error. I've already checked my environment variables path and they point to the right directories. There are no dll conflicts that I can see and I have admin rights to my computer. Any ideas on what could be the problem?

    Double checked my path and everything seems correct. I've copied my path below in case I'm not seeing something.ARBORPATH - C:\HYPERION\ESSBASEPath - C:\HYPERION\ESSBASE\BIN;c:\dmi\win32\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\WbemRunning excel 2000 (which should work with Ess 6.5 no?)Also tried deleting the add-in and reinstalling but to no avail. Other ideas?

Maybe you are looking for