Detected Blocked Outbound Queues

Hi All,
We have found detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
400 R3AUBUPA0008063715       RP1CLNT400                               4 CPICERR A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
400 R3AUBUPA0008063722       RP1CLNT400                               4 CPICERR A3A4177004E04F3031E9148F 06.02.2012 20:02:49
400 R3AUBUPA0008063751       RP1CLNT400                               4 CPICERR A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
400 R3AUBUPA0008063753       RP1CLNT400                               2 CPICERR A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
Status shows CPICERR ,Error when opening an RFC connection .
But i have checked RP1CLNT400 test connection is successful .
Kindly suggest .

Hello,
Check the following notes:
[378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
[430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
Regards,
Eduardo Rezende

Similar Messages

Outbound queue blocked in CFM2

Hello folks,
I am trying to activate the integration model in CFM2 and I am getting message
"Outbound queue blocked"
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: NOSENDS
When I try to manually send the data in the queue in SMQ1 in the r/3, system asks me login to the SCM system and even though I give proper login, queue fails with the error message "Password logon no longer possible - too many failed attempts".But there is no issue with the login credentials.
Can you please helpme out here.
Thanks,
Vikram

Hi
Although you may be entering the correct user and password, the user may now be locked. You need to check if the RFC user is locked and if so unlock then try again.
Regards
Ian

Email Notification When Specific In/Outbound Queue Is Blocked

We are running an integrated environment of ECC and SRM with qRFCs to transfer data, such as a Purchase Requisition, from ECC to SRM system (no XI / PI in the landscape). Sometimes the entries in the queue would be stuck and block the queue from being further processed. We would like to have email notification sent out to responsible persons when that happens. In particular, we would like email notification to be sent out when BBP_EXTREQ_TRANS entry is blocking the queue.
I have read the following blog and think it is a promising general approach.
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
I have however two questions regarding the approach:
1) The blog has the presumption that XI is involved. XI/PI is not part of our landscape.
2) Can we customize the alerting mechanism further by specifying the queue name for alert to be sent out?
Thanks.

Hi Ashish,
Hope you are familiar with WLST please grab ideas from the following beautiful site, which delivers you a lot.
1.Sending Email Alert for WebLogic Servers Current State &laquo; Middleware Magic
2.http://middlewaremagic.com/weblogic/?p=5177
3.http://middlewaremagic.com/weblogic/?p=5582
4. http://middlewaremagic.com/weblogic/?p=7042
First of all why do you allow your servers getting down? If it is often then you need to raise an SR with Oracle. If not tune the parameters according to your environment.
Thanks,
Karthik

Outbound queue locked due to incorrect password

Hi Gurus,
I'm having a problem to activate an Integration Model as I'm getting an error stating that the outbound queue is blocked due to incorrect password.
I have set up the RFC destination of the SCM ECC logical systems wit a valid user (I tested it). I've changed between using a Dialog user and a Communications Data user. Between every change I made I've cleaned the queue using transaction CFQ1.
Do you have an I idea of what I might be missing?
Many thanks,
Diego

Diego,
It is unclear to me which system you are experiencing the problem on. Either way, the reasons are usually the same. I will address establishing the ECC>SCM link. Works the same way in the other direction.
Every time I have had the problem you are experiencing, I usually find that the fault lies with me, not the system - I have made assumptions that were not correct.
BD54 ensure that your logical system name is what you think it is. Unless you are rigorous in your naming conventions, it is easy to become confused between logical names/hostnames/system names for SCM and ECC, ,
NDV2 ensure that the SCM system is properly identified
SM59 Make sure your IP address, or hostname is right. Make sure the system you are logging onto interactively is the one being accessed in SM59. Make sure you have the right userid. Password is casesensitive on some versions of R/3 and APO, but not casesensitive on others. I always use UPPERCASE text only for PWs, at least until everything is totally debugged.
From a technical standpoint, your RFC userid can be interactive or system, I always start with interactive until the intefaces are totally debugged. You auditors may have an opinion the final settings in the production system in this area..
Rgds,
DB49
I hear and I forget. I see and I remember. I do and I understand.
Confucius

Blocked inbound queue RETRY status

Hi everybody
Sometimes I get this alert in the CCMS-> Transactional RFC and Queued RFC -> Inbound Queues->Int. Server Outbound Messages (XBQ0*)->Blocked queues:
Blocked inbound queue XBQ0$PE_W.... status RETRY...........
I can not get the isssue because it happend when nobody is monitoring the XI system. I want to see what happen at this time but I do not how to do it. When I see the inbound queues in the SMQ2 is empty. Could tell me someboy how to get the issue in a trace or log file?
The system works fine normally but it happens sometimes.
thanks in advanced.

Hi Gerardo Mondragon
this issue is not very strange when some queue has very heavy load then for time being messages are queued in the queue and it throws exception and ccms alert is generated. after some time when the queue gets processed all the messsages you will not find any error
if you find error RETRY status in SMQ2 then right click in the last column and execute LUW
it will get processed and queues will be fine
then in RZ 20 you can complete alert
thanks
Sandeep Shrama
PS; if helpful reward points

CFM2 Outbound Queue Error

Dear Experts,
We are getting following error when we start activation from transaction /CFM2
Outbound Queue Blocked
System: CAQCLNT001 User: SAP_ADMIN 05.02.2010 10:33:1
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: Logical system CCQCLNT224 has not been assigned
How can we fix it,
Best Regards
Edited by: Wilian Segatto on Feb 5, 2010 8:04 AM

This error is because logical system is not assigned to Business system group.
First ensure that you are using correct logical system name while creation and activation of integration model.
If it is correct go to path SPRO-integration with sap components- Integration via core interface-Assign logical system and queue type assign this logical system to proper buisness system group.
Hope this helps.
Santosh

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

CRM 5.0 outbound queues to Mobile sales

Hi all,
We have upgraded from CRM 3.0 to CRM 5.0.
I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
Does this mean no data is actually being passed from CRM to Mobile Sales.
At this point of time I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
Thanks.

Hi KP,
This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
Regards,
Ankan

Outbound Queues in CRM system

Dear All,
There are lot of outbound queues in our CRM production sytem which are older than one month,basis is asking wether we can
delete those queues or not,request you all to help me wehter we can delete it or not.if anybody can put some light on how the
queues are getting there then it will really helps..
Thanks,
Sapta

Check in SMQ1 transaction. You can see whether you require them meant for any active extractors running delta or running in regular frequency for your loads.

Message is getting struck in outbound queue

Hi All,
I am doing a simple FILE to FILE scenario . The message is getting struck in SMQ2 (inbound queue). If i go to inbound queue and manually UNLOCK the queue entry then only the message is getting delivered . This is a new installation and we are on PI 7.0 .Please let me know if we have to so some configuration .

Hi !
Check if your queues are registered in the SMQS transaction (for outbound queues) or SMQR (inbound). Go there, then enter the queues you need or reactivate them. They should be activated to process the message automatically whenever they receive something.
Try this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/8412417301ee6fe10000000a1550b0/frameset.htm
Regards,
Matias.

Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

Outbound Queue stacking up for old destination

Hi Gurus,
I am implementing APO in a client and since the native integration (CIF) uses the same RFC structure as BW I need to keep an eye on BW processes as well.
The problem here is that they´ve migrated to BW7, killing the old 3.5 but leaving the logical system registered.
Now what is happening is that I found >4million queues in SMQ1 to this nowhere destination, which kills my CIF performance.
We´ve started to clean this garbage but the stack keeps adding up from regular goods movement transactions. The BASIS and BW team is not helping much so:
I need to find where I set the relationship between theses transactions and the destination so it does not go to the outbound queue.
thanks for the help!

Hi Anand,
Please go to SMQ1 and in qname enter cf* and then execute.
In the error screen press F8 and then select all PPM related queues and delete.
After that run IM after correction and do run CCR report for the reconcilation by tcode :/SAPAPO/CCR .
Manish

Deleting an outbound queue SMQ1

HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
Mike

Hello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues

%C4K_HWPORTMAN-4-BLOCKEDTXQUEUE: Blocked transmit queue HwTxQId0 on Switch

Hi,
On many 4506-E switch with cat4500e-entservicesk9-mz.122-53.SG1.bin, I have frequently this error :
Feb 17 10:30:40.879 GMT+1: %C4K_HWPORTMAN-4-BLOCKEDTXQUEUE: Blocked transmit queue HwTxQId7 on Switch Phyport Gi2/48, count=102879
And it's always between the 4506-E and the Cisco 2901/K1 router, the port is blocked (Pause frames).
I did this below (excepted reset the line card) but the only thing to unblock the port is to reboot cisco2901/K9.
When the problem occurs the console port on the cisco2901/k9 is unreachable and I turned off the port on the 4506 and I disconnected the physical link, the port Ge0/0 on the Cisco2901 still has green leds as if it still was connected !
I also tried this command "flowcontrol receive off" on the 4506's port with the Cisco2902/K9, but nothing change (
Peer is Sending Pause Frames => flow control problem)
So i have no idea where is the problem ? Would you have an idea ?
Thank you for your help.
Regards.
David
Core issue
The %C4K_HWPORTMAN-4-BLOCKEDTXQUEUE:Blocked transmit queue HwTxQId[dec]on[char], count=[dec] error message is generated on a Cisco Catalyst 4500 series switch when connected to a device. This error is a rate-limited message that indicates a transmit queue blockage on a port.
In this case, the traffic on the affected port is limited and blocked for reasons other than being paused. This blockage can occur if the supervisor is not able to send packets to the line card because a busybit message is received. In this situation, blocked transmit queue messages are seen. A bad hardware or speed and duplex mismatch can cause this problem.
Resolution
Perform these procedures as a workaround for this issue:
Issue the shut /no shut commands to recover the port and configure both ends to operate at the same speed and duplex, as per Cisco bug ID CSCsb62330.
If the problem persists, move the connected device to another port and see if the problem also happens there.
Issue the hw-module reset command to reboot the switch or reset the line card, as a final attempt to unblock the Transmit (Tx) queue.
Alternatively, upgrade the the Cisco IOS version to the 12.2(25)EWA2 and 12.2(25)SG releases, which have the fix for this problem, as per Cisco bug ID CSCsb01311.

Thank you for documenting this issue with details. I had this same issue on my Cat4503-E in using VTP 2.0 with a CISCO3640. Once I hard-set the speed/duplex of the trunk port on my Cat4503-E, as well as fa0/0 on my CISCO3640, all I had to do was reload the Cat4503-E. The trunking and VTP both worked just fine.
-cecastil, CCIE #1868

No Change Document in outbound queue for customer status in table VBUP

Hello all,
we face the following issue. A customer status (UVP04), changed by a customer program, is not written in the outbound queue (lbwq) to transfer it in the business warehouse.
I checked several Function modules (VERKBELG_WRITE_DOCUMENT, MCEX_UPDATE_CALL_11.....) without success.
Any help would be appreciated.
jg

Solution found: Dummy change with VA02, that generates a new record in the outbound queue.

Detected Blocked Outbound Queues

Similar Messages

Maybe you are looking for