Detecting IP Multicast Failure in Flash

I have implemented player with IP Multicast using Adobe flash media server . I have two multicast servers , so if one multicast server fails I want to play stream from another multicast server . But In case of IP Multicast a connection to server is never made so how can I detect a failure in that case inside flash player ?

I would recommend taking a look at the Chromium database to see if this has been reported. If not, please go ahead and open a new bug report.
How do I report a bug against Flash Player for Google Chrome?

Similar Messages

Does Weblogic12c support Application Failover ? If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?

Hi all,
Need help to setup High Availability at my workplace, can somebody please tell that Weblogic12c support Application Failover ?
If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?
WebLogic Server - General@

Hi there user,
you can achieve HA in different levels:
1. On a single machine - here you need to set up nodemanager. When started by nodemanager, any server failures will be detected and the nodemanager will try to restart it. OOME is an exception thrown by the JVM and the server state should go FAILED at some point then the NM will try to restart it. Nodemanager is the simplest HA solution you can and must implement for production environment;
2. On redundant machine - you can configure WLS clustering, but you will need more complex environment, i.e. you will need a load balancer in front of the cluster to reverse proxy the requests. This scenario is can also use nodemanager to control the WLS instances on each machine
3. Cluster with server/service migration - the most complex scenario where in cases of machine failure the WLS cluster can "relocate" resources (services and whole severs) to spare machines.
In your case OOME should cause the JVM respectively WLS to be unresponsive, hence the nodemanager will detect this at some point and will try to restart the WLS.
Hope this helps,
A.

Failure of flash movie to run on iWeb

Hi,
I've only started using Flash CS4 a short time ago and I'm having a problem being able to run a short flas movie on an iWeb site.
Here's what I did to create the movie from scratch through to its failure to run on iWeb
1. A QuickTime movie was encoded in H264.
2. This was then encoded with Adobe Media Encoder CS4 to produce the .flv file
3. The .flv conversion was opened and processed with Flash CS4 which produced the .swf file along with the html file as well as a "preview.jpeg".
4. All the files (.swf, .html, .flv plus the preview were then uploaded to my iDisk.
5. Using an html snippet in iWeb, and using the correct coding, I attempted to create the site, which unfortunately refuses to load the movie.
A double click on the .swf file and/or the html file runs the movie along with the skin (but no preview) on my computer here so the encoding' appears to be OK, but uploading all the necessary files to thje server and adding the "correct" code results in a blank panel where the movie should be; no skin and no preview image either.
The movie loads and runs perfectly when I used the Longtail Video JW player files and uploaded them to my iDisk (this proves the path to then server's OK).
But it's a no-go using either the same .swf or the .html created with CS4.
I've even gone through the process bit-by-bit viewing an on-line vbideo tutorial... their's works, mine doesn't.
I am completely mystified by this; can anyone please advise?
TIA,
TT

Hi Lon,
Many thanks for your response.
Now that would explain things!
I'll try the CS4 files on one of the servers at work here and see if that really is the answer... but I suspect you're dead right!
Thanks again, much appreciated.
Best,
Tony

Plug-in Failure Safari Flash

Hi,
I have been having this strange error trying to open flash content on internet I get: Plug-in Failure badge.
Flash only works on chrome. Safari, Firefox & Opera cant play flash.
Flash version: 11.8.800.94
Safari: 6.0.5
OSX: 10.8.4
Tryed:
compleatly removing flash and everything adobe from computer and reinstaling
removed java
removed all plugins and exstensions
removed all browsers except safari (because I cant)
cleaned disk & repaired disk permissions & repaired disk
reinstalled combo update with the latest safari 6.0.5
Now the funny thing is that after instalation of flash you get this page: http://get.adobe.com/flashplayer/completion/aih/?exitcode=0&type=install - it automaticly opens in chrome and chrome is not a default browser.
When i uninstaled chrome it wouldnt open anything after instalation, and after reinstaling chrome and uninstaling and instaling adobe again it again opend the page in chrome???
Please if anyone has any ideas help.
I had this problem since I updated flash player some time ago (about a month).
Also! : I would love to try the older version of flash player (like 10.3.) but safari blockes it. Is there any way I can unblock older versions?
I found that I need to move flash from internet plug-ins (blocked) to normal internet plugins folder but I dont get internet plug-ins (blocked) folder.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Detecting Dynamic Disk Failures?

I can't seem to get a clear answer to the following issue.
I've got a few systems in the field that are using Dynamic Disks to offer a RAID one solution, I know it's not the most ideal, since a real hardware RAID would be better. But humor me here.
Is there a way to detect a failure? I've had a few systems that ran into problems and have a failed dynamic disk. It's easy enough to fix, but is there any type of proactive notification that this situation has occurred? Can I somehow see it in the event
logs (I can't seem to find any indicator)?
If anyone has any insights or tips?
Thanks,
Dower

Hi,
As far as I konw, Disk error checking could be run with task scheduler. That's to say, you can add disk error checking to Task Scheduler and specific the checking time and date.
You can refer to the link below for more detail:
http://www.ghacks.net/2011/09/04/how-to-automate-the-disk-checking-utility-in-windows-7/
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please have a try on your computer for test, if you need any further assistance, please feel free let me know.
Roger Lu
TechNet Community Support

How to diagnose plug-in failure with flash 13.mumble and Safari 7.0.3 on Mavericks?

I recently accepted a flash update, which if Installed Plug-Ins is correct has me at Shockwave Flash 13.0 r0 for my 7.0.3 Safari (9537.75.14) on 10.9.2 running on my mid-2007 24" Intel Core Duo iMac. Alas, when I go to a site such as http://www.theatlantic.com/technology/archive/2014/04/flyndrive-notes-from-all-o ver/360495/ , where the video should be playable I get "Plug-in Failure." How can I go about finding-out just why the plu

Adobe Community: ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

Publish settings so it will detect earlier versions, not just flash player 10.2!!

How to i change the publish settings in cs4 (action script as2) to detect like flash player 7 or 8 not just 10. Cuz not alot of people have the newest flash player????? it has a spot where i can change it but only the decimals......10."0"."2".....the numbers in quotes are changeable but not "10"...any ideas??

file/publish settings/flash and select the fp version you want.

SDK 14.7 failure in flash programming

Hi all,
I am unable to use SDK 14.7 to program binary file into flash of microBlaze. I keep geting the error : "CFI query of block/sector map returned inconsistent result!".
I see in other thread that other also got this failure with 14.7, while 14.4 works. should I try 14.4 ? Can I install it in the same computer ? Is it suffecient to donwload just the SDK or just the "lab tools" instead of the full package ?
Thanks,
Ran

It works for Virtex-6 LX240 board.
Thanks a lot.
sampatd wrote:
We found some issues with the "-Os" optimization flag in the GCC compiler that was used to build the Flashwriter drivers for 14.7 version of the tool.
The workaround for the issue is replacing -Os with -O3 in the GCC command in flashwriter.tcl file @ C:\Xilinx\14.7\ISE_DS\EDK\data\xmd

Installation failure for Flash 12

Hi all,
Platform:          Mac Pro
OS:                   OS X 10.6.8
Browsers:        Safari 5.1.1 and Firefox
The installation of Flash Player 12.0.0.44 fails at 95%, there is no error message of failure, the installation just stalls (Ihave left it for up to two hours). I have uninstalled the previous version of Flash Player and now tried twelve times downloading and installing with exactly the same results. Any ideas how to get past this please.

Snow Leopard Clean Install.pdf
Use those instructions with this installer: Flash Player 12.0.0.44 (Mac OS X)

HDD Failure? Flashing Folder Question Mark

Well I have had my Macbook (White) for over 3 years now and has not caused my one problem until today. I went to boot my mac and I just kept on getting to the apple screen and the spinning circle thing underneath, I left it for a bit and then force shut it down (hold power button) and tried again and again. Then I decided to go onto my Windows bootcamp side of my Mac; so I pressed the option (alt) key to view my partitions. I went on to the windows and it loaded up to a black screen and an error came up: 'NTDETECT FAILED'. So I had to force shut down again. and let it boot into Mac again. Then the flashing question mark folder came up; so I forced quit and tried to boot again and the same thing happened again so I left it on for a bit and then I heard a clicking noise and got worried and forced shut down. Then tried to boot again holding the option (alt) key to show my partitions and neither my Windows or Mac partition would show up! So I inserted my Linux live CD and that worked fine (booted etc). So I tried to boot once more into mac and fail. So I googled (thanks to my iMac) the symptoms and I found it could be a HDD failure, and tried many of the advised suggestion. I put the tiger install disk in and booted up from it (I was given tiger disk + leopard upgrade disk on purchase) and tried to use disk utility and repair permissions etc... everything failed.
1. So is it as I discovered?
2. Anything I can do to recover data/ get my HDD back?
3. Do I need a HDD replacement? If so how much will it cost? (Warranty ran out)
4. Any advice / comments?
Please feel free to share your experiences and advice. Any help is welcome!
Thanks in advance
DjHitzz

Welcome to the Apple discussions.
There are a couple of reasons you could get the question mark on the folder, however, when you add the clicking sound and that disk utility can't find anything to work with, that all points to a bad hard drive. This won't make you feel better, but between 3-5 years is when laptop drives often start to fail.
So, what are your options ..... you'll need a new hard drive. If you're handy inside a computer, you can do this yourself or you can pay for someone else to do that. If you take it to Apple, they will keep your existing, broken hard drive as a trade in, which bothers some people who might want to recover data off of it or are concerned because there may be personal information on the drive. And Apple may use a refurbished hard drive, and personally, a brand new hard drive isn't that expensive ($50-$75+ depending on size), and I'd rather have a new hard drive than a refurbished one that already has had a problem.
Getting data off a dead drive .... there are services that will extract your data off your dead drive, but be prepared to pay dearly for it. You can search these discussions for recommendations or google it.
After you replace your bad hard drive, figure out how to backup your data, either to an external hard drive or to an online service. Much cheaper than paying someone to recover data off a bad hard drive.

Plug-in failure with Flash Player

Everytime I try to launch a video using Flash Player, I get a plug-in failure. This is happening on Safari as well as Firefox.

And Opera. Started with an update. Even Apple DVD player won't operate without it.

Recurring failure- adobe flash player plugin-

Hi, I communicate a recurring failure appeared to me in my new pc (intel core i5-intel hd 2010 graphics - system windows 7 64 bits, browser firefox 6 and driver updated to 9.26.2011). In Firefox, it's like making the mouse scrool remain a fragment of the picture played duplicated and static, and continued below normal playback. Attached image to specify a little better. I must say that I have enabled hardware acceleration option for defect in adobe flash, and Firefox.
I tested with Google Chrome and the same thing happens. But only when hardware acceleration is enabled (in this browser is presented as an experimental feature that the user must manually activate).
I do not want to lose performance and efficiency in the reproduction of videos, and software for products high quality and modern. Will this damage my video card or monitor?
It's my first visit, thank you for your cooperation.

Thanks for posting, the screenshots definitely help illustrate the problem you're encountering. Could you try updating your video drivers (Intel HD Drivers) to see if this resolves the problem? If it doesn't, please follow the instructions in the following FAQ so we can gather additional details and investigate further.
How do I troubleshoot and report problems with Flash Player Video?
Thanks,
Chris

Safari 6.0.5 plugin failure x Flash player

Hello,
Two days ago I've opened my Safari 6.0.5 like I do everyday and suddenly I have the plugin Failure problem, I can't watch any vids on youtube or anything. I've been reading solutions for it and I did all the troubleshoot I've found, but no positive result.
I have Chrome and it works fine since it has it's own plugin attached. But I don't want to use chrome since I actually like this version of Safari, but I might change my mind in the end if I dont find a solution for this
> Uninstalled, Reboot, Reinstall. KO (Latest version @adobe.com)
> Unsubscribed from the HTML 5 thing from Youtube (seamed to work for 2 minutes, then next video on youtube. KO)
> Cleared Cahce, reset Safari. KO
Is there anything else I can do ?
I'm running my MAC on
Software OS X 10.8.4
Thanks for the help guys
Alexandre Morey

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

OEM doesn't detect Servlet .init() failure!?!

I'm trying to move some one-time initialization into a servlet .init() method and I wanted to see what would happen in OEM (Oracle Enterprise Manager) when this servlet's init() method failed (by throwing ServletException). I was hoping to see a Stop Sign or something...but instead OEM thinks everything is fine. Does anyone know how to make OEM aware of the actual state of the Servlets deployed under the OC4J containers it maintains?
Bob
package demos;
import org.apache.struts.action.ActionServlet;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletContext;
public class MyActionServlet extends ActionServlet {
public MyActionServlet() { }
public void init() throws ServletException {
super.init();
ServletContext sc = this.getServletContext();
sc.setAttribute("AppScopeAttribute",
"sc.toString()=" + sc.toString());
sc.setAttribute("MyInitParam",
this.getInitParameter("MyInitParam"));
throw new ServletException(
new Exception("This sucks...that sucks...everything sucks")
}

Maybe if I format the source better someone will render an opinion? I'm looking for ways to have the Oracle Enterprise Manager detect and report on .init() problems in my servlets. Here is a sample servlet that does nothing but throw and exception at .init() time. How can I configure OEM to react to and report this condition?
package demos;
import org.apache.struts.action.ActionServlet;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.ServletContext;
public class MyActionServlet extends ActionServlet {
  public MyActionServlet() { }
  public void init() throws ServletException {
    super.init();
    ServletContext sc = this.getServletContext();
    sc.setAttribute("AppScopeAttribute", "sc.toString()=" + sc.toString());
    sc.setAttribute("MyInitParam", this.getInitParameter("MyInitParam"));
    throw new ServletException( new Exception("This sucks...that sucks...everything sucks"));
}

Network card no longer detected after hdd failure

So yeah, my laptop's hdd crashed, I cloned it to another.
It no longer detects my pcmcia card, model GCS2220.
I tried chrooting the install from livecd and reinstalling kernel, still nothing.
Odd thing is, before I chroot the card works fine, after chrooting ifconfig fails to work with eth0.

Did you bind (mount -bind olddir newdir) /dev and mount /sys and /proc (I mean that's the place wherefrom ifconfig gets its information ) from the livecd's environment into ur chrooted environment ??
Last edited by Onwards (2008-09-24 00:43:11)

Detecting IP Multicast Failure in Flash

Similar Messages

Maybe you are looking for