Detecting the presence of a SIM card in an internal WWAN SIM slot
Was wondering if anyone can think of a way to remotely and/or programatically detect if a SIM card has been physically inserted into a ThinkPad's internal WWAN slot?
ie Can we query through WMI or any other mechanism whether a SIM card is currently installed in a ThinkPad.
This question could equally apply to any OS / hardware version, but my current situation is for a number of ThinkPad T410s running Windows XP.
Any ideas appreicated?
Casey911,
Lets get those contracts transferred over to your new iPhone! Which iPhone are you using and which app are you using to try to transfer the contacts with?
SarahO_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
i got an iphone. when ive insert my sim card in it, it sat sim not valid. at the end its mentioned please contact apple support. can you help me?
Your phone is probably carrier locked and you are using a SIM form a different carrier. Are you?
-
Windows support software not detected the presence of Windows support software
I have already downloaded the Windows support software but why the Mac warning that it could not detecte the presence of Windows support software (I use USB for install)
Same.
-
what do i do when the phone tells me to insert sim card, when there's a sim card in it already
Hello there, DJ Makobi.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Can the iPhone 5 be unlocked to allow SIM card installation for international service?
Can the iPhone 5 be unlocked to allow SIM card installation for international service?
<http://appleinsider.com/articles/12/09/21/verizon_iphone_5_reportedly_unlocked_f or_gsm_3g_networks>
<http://www.tuaw.com/2012/09/25/verizon-wont-relock-the-iphone-5s-gsm/> -
hello friends , i have a unlocked iphone 4 . i just want to know is that work on chart wireless . i allready cutt a microsim card with sim cutter and when i insert the sim card in, it says no sim card install. pls help me . thks
Why don't you ask chart wireless?
-
No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phone
How do i solve this problem?
No SIM card Installed – Insert a valid SIM card with no PIN lock to Activate phoneYou do what the message instructs you to do and insert a Valid SIM with no PIN lock.
-
No SIM card installed insert a valid SIM with no pin lock to activate iphone
Dear Sir, Recently I noticed that my iphone 3GS is responding very slowly, I thought it got hanged due to the high memory usage so I restarted it but after the restart it showed me iTunes logo & a USB cable. Though the SIM card inside the phone doesn’t have any lock but the message says: No SIM card installed insert a valid SIM with no pin lock to activate iphone. When I connected it to itunes I get this message: iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes, there was a passcode on my iphone which can not be unlocked now as after sliding the arrow the only options I get are: emergency calls & info’s as IMEI: 01 215500 xxxxxx x & ICCID: Unknown. I was suggested to delete the complete programme & get the iTunes reinstalled but I don’t want to lose my data. Can you help me to get my data back? Pls. reply ASAP. Thanks & regards.
ICCID unknown is a critical failure, usually caused by hacking or jailbreaking the phone. It can not be fixed. The phone will need to be replaced.
-
even when i insert my sim card it says insert your sim card kindly help me in this regard i cant use my phone
Sounds like the phone was jailbroken or hacked to unlock it. Was it?
-
Can I get my sim card cut into a micro sim at an apple store?
Can I get my sim card cut into a micro sim at an apple store?
Last I heard, "trimming" the SIM cards was frowned upon by the carriers, so I doubt Apple would go ahead and do such a thing at the Stores.
But YMMV. -
It is just searching on my iPhone 4s with or without a sim card. can not connect to sim card
it is just searching on my iPhone 4s with or without a sim card. can not connect to sim card
I can't pair my iphone 4s with my imac. It is very frustrating. I can walk by anything resembling a bluetooth and my iphone with pair...but not with my mac. Any assistance would be appreciated.
-
I have recently upgraded from the iPhone 3g to an iPhone 4, and I was going to give my 3g to a friend, but it comes up with the message as above, whenever the phone is turned on...
There is a sim card installed...
My carrier (virgin) say that they have unlocked the phone from optus.
How do I fix this?
thanks
AnushkaVirgin use the Optus network here in Australia - which is why, the 3G phones showed you connected to the Optus network, and not to the Virgin network...They don't have their own network, they piggyback on Optus - which is why it would show that it is locked to Optus!
They also said they would unlock my iPhone 4 - which has been done! So there's obviously something wrong with the phone... -
my iphone doesn't open on the itunes and it shows me a message saying there is no sm card disconnect and insert sim card and there is a working sim card inside the device and i can't restore the device as it doesn't open on the computer so what shall i do?
Remove and reinsert the SIM card.
Replace the SIM card. -
I have an old iPhone 3S, that was used with Bell. My friend lost her phone and I lend her this one, which she unlock to use with Rogers. I got it back and want to use as an iPod not the phone, but when I connected to iTunes I am getting this message: "There is no SIM card installed in the iPhone you are attempting to activate. Please diconnect and insert a SIM card".
I went to Bell and Rogers where we tried inserting active cards but message never changed.
On the phone itself I am able to get wifi but finish with "Your phone could not be activated because the activation server is temporary anavailable."
I run diagnostic from iTunes:everything is working properly, only message out of normal is "iTunes is not running in safe mode"
How can I sinc this phone with iTunes, so I can use it to lisen to music?
Any help will be apriacietedI can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
No signal for my sim card, no signal for my sim card
there's no signal when i insert the sim card , they only appear the searching... text only . i've already reset the network setting , but it doesn't help
Yes you can. All Ipad's are unlocked and can be used any where in the world. Buy the AT&T version which is GSM in other countries
Maybe you are looking for
-
I just got done downloading adobe Flash Player, Reader, Air, + one other. When they were done installing I had 4 exe files for flashplayer, all exactly the same, 2 readers, 4 of the other that I can't remember the name. I am wondering why adobe dow
-
JSTL: Using value of a variable in expression
All, I am stuck on this problem and I hope someone here can help. This is a real tough one for me to explain but I'l try my best. I am try to have my includes a little more component oriented. So I wanted to use something like the following <c:import
-
Why T61 have faster upload than desktops (model m81 and below)
The issue was when we try uploading files, desktop have slow upload while T61 can upload fast. The difference when we tested a 15mb file upload was 15secs for T61 and 2-3mins for desktops. Below were the testing done on how we came up on the conclusi
-
Auto Force Framed Objects to Next Page
How do I auto force a placed object to the next page? As you can see in the picture, I have two objects almost on top of each other. The bottom object is being forced up because there isn't enough room at the bottom of the page. I know I can force it
-
Exchange 2010 Virtual Directory Authentication Settings
Is it normal for authentication settings to be different in IIS Manager and Exchange 2010 Management Console? OWA and ECP are set to forms based in EMC, but IIS shows OWA and ECP as basic = enabled and everything else = disabled. IIS shows OAB as win