Detection problems with printers

I was using Tiger before and with Tiger I could search for network printers (HP printers using CUPS unix printing system) very easily. Recently I bought a new MB and it has Leopard install in it. When I use my new MB I could not detect those printers I was using before. I also discovered that printing preference has lots of complicated stuff in it. previously adding printers was so easy. I don't know how to fix this problems. Can anyone help?
regards
Naveen

Start with this:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/14001.html
Then click Add and make sure you are in the default browser window.

Similar Messages

  • Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    You might get some help over on the shuffle discussions.
    http://discussions.apple.com/forum.jspa?forumID=822

  • ITunes cannot run because it has detected problem with audio configuration

    Hello! I am currently in a russ with my iTunes. When I try to open it, it gives me the message:
    iTunes cannot run because it has detected a problem with your audio configuration.
    I'm not sure what this means. I haven't changed any settings on my computer since the last time iTunes ran. Is there anyone that can help me? Thank you!

    I am also having the same problem. I have followed the procedures on the link page numerous times. It will work and I think I have fixed the problem and then it the problem starts again. I have uninstalled/reinstalled itunes and quick time, reverted to an earlier version of itunes, etc all to no avail.

  • Detected problem with the audio configuration

    Hi guys, can anyone help me with this problem?
    i really have no idea how this error occured. Coz i didnt do anything with the audio configuration.
    I worked well before i updated the iTunes.
    The error is:
    "The iTunes cannot run because it has detected a problem with your audio configuration"
    Thanks...

    Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • Photoshop cs6 has detected problem with gpu

    my photoshop says it detected a problem with the GPU..However, my card seems to be working perfectly with other software and games..Should i be worried or jus ignored the message?
    thank you in advance

    Update your video card driver from the GPU maker's website to pick up all the bug fixes.

  • ITunes won't run - detected problem with audio configuration

    I just installed iTunes 7 (I had iTunes 6) and now it won't work. An error message comes up that says "iTunes cannot run because it has detected a problem with your audio configuration". iTunes worked just fine before I downloaded the new version. I tried doing a system restore to go back to version 6 but it wouldn't work. Please help! Thanks!

    I searched on google and found my answer. I redownloaded quicktime and now it works.

  • Itunes7 does not let me start up because detected problem with audio config

    hi,
    i have had itunes for a while now but i just upgraded it to version 7. i restarted my computer afterwards but when i tried to start up itunes for the first time it said there was a problem with the audio configuration.
    this is the message,
    itunes cannot run because it has detected a problem with your audio configuration.
    i am using windows xp and would be very grateful for any help, thanks!
    lenovo 3000, N100   Windows XP  

    this is the message,
    itunes cannot run because it has detected a problem with your audio configuration.
    That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
    The following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • ITunes has detected problems with your audio configuration

    Hi there!
    I recently had to reformat my PC after problems with Windows 8.1, 64 bit version.
    I have just reinstalled iTunes and now I am getting an error: "iTunes has detected a problem with your audio configuration. Audio / Video playback may not operate properly."
    I looked at other posts concerning this issue. In the most recent post, the poster was able to resolve the issue himself, but wasn't sure how he did it, and the older posts were archived and I could not access them.
    Didn't have this issue prior to the re-formatting and reinstallation, so not clear what to do.
    Please assist.
    Thank you!

    P.S. I am able to hear sound out of my speakers, so I don't think it's a problem with the speakers or the sound card.

  • Loading 7.1.1 error message -  "detected problem with audio configuration"

    I have deleted Quicktime and reloaded iTunes and keep getting the same error message about the problem with the audio configuration. I have removed iTunes completely and re-installed it and still get the same message. I have used the Windows cleaner program to remove all elements of Quicktime and still no resolution. Please help!

    I have the exact same problem. Im running vista business on my vaio. itunes has been working on this computer for at least two months now flawlessly and just today this message showed up. If you find a solution email me and i will do the same if i find one.

  • We've detected problems with your settings- cant get past this initial error message so Im forced to use explorer

    seems to be about cookies and cache clearing etc.
    my compyter has been infested a few times so am reluctant to disarm the anti virus as im not 100% sure what im doing there
    explorer works fine

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • My Book 3.0 (1TB, USB 3.0) detection problem with Envy Phoenix 810-135qe

    I have  a My Book 3.0 (1TB, USB 3.0)... The older My Book not the newer one... "My Book Essential" or something like that.
    I was using it with W7 x64 backup utility on an older HP desktop (HP Pavilion a6560t) without issue up to the day my new HP Envy 810-135qe arrived. I downloaded the latest drivers from WD support, and the thing PnPed fine off the non-powered USB 3.0 on the back of the 810. However, the 810 drops connection after sleep, hibernation, lock, or simply just over time. I've run diagnostics on the WD and the cables, all checked out fine. I tried shutting off power saving to the USB 3.0s in device manager (just a guess), and that seemed to work for a few weeks, however I'm still having the detection issue periodically. All of my drivers are up to date on the HP side. I'm fully reformatting the WD now to see if that might somehow fix the issue (I'll update in a few days on how that worked out).
    Anyone have any idea what's amiss? I suspect something with the BIOS. HP chat support has been no help (they go through the same checks I've already done myself) and they got really spooky on another chat when I asked about adding a SSD as the boot drive (I knew it was an issue from here and other forums).... Handed me off to second tier support, and all they would tell me is that they couldn't tell me anything... Basically, no support for any config except for how it was shipped because it's a "custom build" (yes, buyer's regret big time).
    Secondly, anyone running a similar config with a en external back up that's running smoothly? My WD is getting old so I was thinking of one of the newer portable USB 3.0 HDDs (both 2.5 and 3.5). My specs follow.
    HP Envy 810qe - Win 7 (810-135qe)
    Product number: F9A63AV#ABA
    Windows 7 Home Premium 64
    4th Generation Intel(R) Core(TM) i7-4770K processor quad-core [3.5GHz, 8MB Shared Cache]
    4GB Nvidia GeForce GT640 [DVI,DP,HDMI & VGA via adapter]
    12GB DDR3-1600MHz [2 DIMMs]
    2TB 7200 RPM SATA Hard Drive
    16GB mSATA SSD Cache
    Microsoft Office Trial
    Security software trial
    Blu-ray Reader & SuperMulti DVD burner
    15-in-1 Multi-slot Media Card Reader, 4 USB Ports (Front/Top), Audio [Front 2USB2.0, Top 2USB3.0]
    No TV Tuner Card
    Integrated Sound, Envy Audio; Beats Audio
    HP USB keyboard and optical mouse
    HP Wireless 802.11 a/g/n with Bluetooth(R)(2x2)
    HP Home & Home Office Store in-box envelope
    This question was solved.
    View Solution.

    Anglogator, welcome to the forum.
    I have the exact computer (See my signature below.).  I have installed a Samsung EVO 840 500 GB SSD.  It works absolutely great.  Samsung SSD's seem to be the only brand that boots without changing any settings in the UEFI Firmware.  If you decide to buy one, I will be glad to walk you through the installation process.
    I also have a "WD My Book Essentials" 2 GB external hard drive.  It works perfectly without making any changes to the BIOS.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Vista driver/detection problems with Zen

    Ok, I've recently switched from Windows 2000 to Windows Vista 32-bit (different PC, not an upgrade) and i'm having trouble with my computer detecting my Micro 6GB AND installing the needed drivers- I no longer have the original software.
    When I connect the player into the USB dri've, a prompt recognizes the player brand/type and asks me to either install the software via cd-rom or locate the files needed manually. I downloaded the Creative Mediasource Player/Organizer as well as Microsoft DirectX 0, yet the entire installation process runs smoothly until last minute when it notifies me that "setup is unable to detect a supported product on your system." I'm also unable to locate my player in the device manager through Windows Control Panel. It does, however, detect my Micro as a Zen product when i put it in Removable Disk mode.
    Why does my operating system recognize my player initially, yet it doesn't detect it on my
    system, rendering me unable to install the software? Thanks for any help.

    No, and I had that thought in the back of my head- I figured the problem was with Windows Vista. It's not possible to update your firmware when your computer won't detect your player though, right?

  • Lion problem with printers

    Hi,
    I have upgraded to Lion and did all the software update.
    I use different printers in different locations (home,work, office) and I had to add any printer using System preferences.
    However, everytime I connect my MacBook to a printer I had been using few days in advance, that printer is missing and Lion does not recognize it anymore.
    Most of the time I have to re-install the driver, but many times it does not solve the problem and I can not use the printer.
    do you have any suggestion?
    pls email at [email protected]
    thank you

    For those with the same problem, Primera says they will have new drivers up 7/31/12:
    http://www.primera.com/primera_printer_drivers.html
    I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully.

  • Autosync - Sync Detection Problem with Video/Audio from different sources

    Hi,
    i've got the following problem:
    I'm editing a feature film, where video comes from tape and audio from harddisc-recorder. The clips are combined/linked manually via in-point (slate).
    If I cut this video/audio combined clip in the timeline, and move only the audio 3 frames to the right, sync detection informs me correct about the out of sync problem (3 frames). BUT: If I split the audio file in two pieces, the left clip still has the "out of sync" info in the timeline and remains "linked" to the video, but the right clip doesn't show his relation to the video anymore !!!
    Is this a bug ?
    Because, if I use video and audio from one "media-source", ex dv, the sync detection in the timeline is working correct with the above example ?
    I'm lookin' for a similar way to sync clips like autosync with media-composer and thought combine audio and video clip to a new combined clip should do this....
    Thanks for help !

    I have my waveforms back! Thank you SO MUCH! I looked everywhere and just couldn't find a setting for this.
    As for the sync, I guess that's OK - it's no worse than what I had before (and with the waveforms back, less of an issue to do manually). Would be nice if they'd add the ability to offset the audio track in the Modify Clip screen at some point (and it would open up the multi-cam sync feature to more users), but I can cope without for now.
    Thanks again for your help.

  • SBH52 detection problem with Nokia 108 (BT 3.0)

    Hello there,
    i'm facing problems in pairing my Nokia 108 candybar GSM with Bluetooth 3.0 with the SBH52.
    No similar issues with Ipad, Xperia Z, etc...
    Anyone a suggestion in order to solve this issue?
    Thanks in advance!
    Frank

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Could you please elaborate a bit? 
    How are you experience pairing problem? Can your devices find your SBH52?
    What are your thoughts about this forum? Let us know by doing this short survey.

Maybe you are looking for