Detection State 'Unknown' in SCCM 2012 Software Compliance Report

My management is looking for windows patches compliance reports from SCCM 2012
When I am trying to prepare Compliance Reports with SCCM 2012 for windows patches, I am noticing that I have lots of patches, where "Unknown" state is showing against many Windows Patches. I was expecting the reports to show “Not Required"
instead of "Unknown".
Please tell me, where the issue might be and how to rectify it.
Thanks in advance.

Thanks for your reply Jorgen. Is there anyway I can initiate a " Software Update Scan on all Clients from SCCM Console? If yes, please let me steps- how?
As a test, I run "Software scan from a client and client report back to server. However on WindowsUpdates.log I can see some unhappy logs.
Does it mean that WSUS server and clients are having some issue?
2014-08-03 16:43:56:773 840 1668 AU ## END ## AU: Search for updates [CallId = {6E29C07F-4A2B-4137-8228-D47F81523EFD}]
2014-08-03 16:43:56:773 840 1668 AU #############
2014-08-03 16:43:56:773 840 1668 AU AU setting next detection timeout to 2014-08-03 11:43:56
2014-08-03 16:44:01:664 840 110c Report REPORT EVENT: {F5E38138-DE94-45D1-A8D0-79C4C8667568} 2014-08-03 16:43:56:664+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-08-03 21:43:56:923 840 a4c AU #############
2014-08-03 21:43:56:923 840 a4c AU ## START ## AU: Search for updates
2014-08-03 21:43:56:923 840 a4c AU #########
2014-08-03 21:43:56:923 840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
2014-08-03 21:43:56:923 840 d58 Agent *************
2014-08-03 21:43:56:923 840 d58 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-03 21:43:56:923 840 d58 Agent *********
2014-08-03 21:43:56:923 840 d58 Agent   * Online = Yes; Ignore download priority = No
2014-08-03 21:43:56:923 840 d58 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2014-08-03 21:43:56:923 840 d58 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-03 21:43:56:923 840 d58 Agent   * Search Scope = {Machine}
2014-08-03 21:43:57:439 840 d58 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
2014-08-03 21:43:57:454 840 d58 Misc Microsoft signed: Yes
2014-08-03 21:43:57:454 840 d58 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
2014-08-03 21:43:57:454 840 d58 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
2014-08-03 21:43:57:454 840 d58 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
2014-08-03 21:43:57:454 840 d58 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
2014-08-03 21:43:57:454 840 d58 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-08-03 21:43:58:782 840 d58 Agent   * WARNING: Exit code = 0x800B0001
2014-08-03 21:43:58:782 840 d58 Agent *********
2014-08-03 21:43:58:782 840 d58 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-03 21:43:58:782 840 d58 Agent *************
2014-08-03 21:43:58:782 840 d58 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-08-03 21:43:58:782 840 11f8 AU >>## RESUMED ## AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
2014-08-03 21:43:58:782 840 11f8 AU   # WARNING: Search callback failed, result = 0x800B0001
2014-08-03 21:43:58:782 840 11f8 AU   # WARNING: Failed to find updates with error code 800B0001
2014-08-03 21:43:58:782 840 11f8 AU #########
2014-08-03 21:43:58:782 840 11f8 AU ## END ## AU: Search for updates [CallId = {B4CB615A-9D97-4933-947F-556215D85E59}]
2014-08-03 21:43:58:782 840 11f8 AU #############
2014-08-03 21:43:58:782 840 11f8 AU AU setting next detection timeout to 2014-08-03 16:43:58
2014-08-03 21:44:02:454 840 d58 Report REPORT EVENT: {5653D57E-2599-426E-B3F2-3F626EDC9C8D} 2014-08-03 21:43:57:454+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-08-04 02:43:59:327 840 a4c AU #############
2014-08-04 02:43:59:327 840 a4c AU ## START ## AU: Search for updates
2014-08-04 02:43:59:327 840 a4c AU #########
2014-08-04 02:43:59:327 840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
2014-08-04 02:43:59:327 840 1528 Agent *************
2014-08-04 02:43:59:327 840 1528 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 02:43:59:327 840 1528 Agent *********
2014-08-04 02:43:59:327 840 1528 Agent   * Online = Yes; Ignore download priority = No
2014-08-04 02:43:59:327 840 1528 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2014-08-04 02:43:59:327 840 1528 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-04 02:43:59:327 840 1528 Agent   * Search Scope = {Machine}
2014-08-04 02:43:59:858 840 1528 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
2014-08-04 02:43:59:858 840 1528 Misc Microsoft signed: Yes
2014-08-04 02:43:59:858 840 1528 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
2014-08-04 02:43:59:858 840 1528 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
2014-08-04 02:43:59:858 840 1528 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
2014-08-04 02:43:59:858 840 1528 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
2014-08-04 02:43:59:858 840 1528 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-08-04 02:44:00:577 840 1528 Agent   * WARNING: Exit code = 0x800B0001
2014-08-04 02:44:00:577 840 1528 Agent *********
2014-08-04 02:44:00:577 840 1528 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 02:44:00:577 840 1528 Agent *************
2014-08-04 02:44:00:577 840 1528 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-08-04 02:44:00:577 840 1018 AU >>## RESUMED ## AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
2014-08-04 02:44:00:577 840 1018 AU   # WARNING: Search callback failed, result = 0x800B0001
2014-08-04 02:44:00:577 840 1018 AU   # WARNING: Failed to find updates with error code 800B0001
2014-08-04 02:44:00:577 840 1018 AU #########
2014-08-04 02:44:00:577 840 1018 AU ## END ## AU: Search for updates [CallId = {EBB099BD-7E1E-481B-B354-1DF2CD3AB53F}]
2014-08-04 02:44:00:577 840 1018 AU #############
2014-08-04 02:44:00:577 840 1018 AU AU setting next detection timeout to 2014-08-03 21:44:00
2014-08-04 02:44:04:859 840 1528 Report REPORT EVENT: {3121ED76-441E-4862-A90B-9AF1B5170B85} 2014-08-04 02:43:59:858+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-08-04 07:44:00:725 840 a4c AU #############
2014-08-04 07:44:00:725 840 a4c AU ## START ## AU: Search for updates
2014-08-04 07:44:00:725 840 a4c AU #########
2014-08-04 07:44:00:725 840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
2014-08-04 07:44:00:725 840 11f0 Agent *************
2014-08-04 07:44:00:725 840 11f0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 07:44:00:725 840 11f0 Agent *********
2014-08-04 07:44:00:725 840 11f0 Agent   * Online = Yes; Ignore download priority = No
2014-08-04 07:44:00:725 840 11f0 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2014-08-04 07:44:00:725 840 11f0 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-04 07:44:00:725 840 11f0 Agent   * Search Scope = {Machine}
2014-08-04 07:44:01:178 840 11f0 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
2014-08-04 07:44:01:178 840 11f0 Misc Microsoft signed: Yes
2014-08-04 07:44:01:178 840 11f0 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
2014-08-04 07:44:01:178 840 11f0 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
2014-08-04 07:44:01:178 840 11f0 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
2014-08-04 07:44:01:178 840 11f0 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
2014-08-04 07:44:01:178 840 11f0 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-08-04 07:44:01:803 840 11f0 Agent   * WARNING: Exit code = 0x800B0001
2014-08-04 07:44:01:803 840 11f0 Agent *********
2014-08-04 07:44:01:803 840 11f0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 07:44:01:803 840 11f0 Agent *************
2014-08-04 07:44:01:803 840 11f0 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-08-04 07:44:01:803 840 14dc AU >>## RESUMED ## AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
2014-08-04 07:44:01:803 840 14dc AU   # WARNING: Search callback failed, result = 0x800B0001
2014-08-04 07:44:01:803 840 14dc AU   # WARNING: Failed to find updates with error code 800B0001
2014-08-04 07:44:01:803 840 14dc AU #########
2014-08-04 07:44:01:803 840 14dc AU ## END ## AU: Search for updates [CallId = {CC637D7F-C439-4E83-A71D-645B2CD92B8A}]
2014-08-04 07:44:01:803 840 14dc AU #############
2014-08-04 07:44:01:803 840 14dc AU AU setting next detection timeout to 2014-08-04 02:44:01
2014-08-04 07:44:06:178 840 11f0 Report REPORT EVENT: {5CC4BC72-612B-4C93-B560-57DEBEF9DD30} 2014-08-04 07:44:01:178+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-08-04 07:56:20:733 840 a4c AU AU was unable to detect updates for more than 48 hours
2014-08-04 07:56:25:733 840 11f0 Report REPORT EVENT: {BFD85143-59AD-4E15-9797-4CEE9D7F089F} 2014-08-04 07:56:20:733+1000 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software
Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2014-08-04 12:44:01:690 840 a4c AU #############
2014-08-04 12:44:01:690 840 a4c AU ## START ## AU: Search for updates
2014-08-04 12:44:01:690 840 a4c AU #########
2014-08-04 12:44:01:690 840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
2014-08-04 12:44:01:690 840 1320 Agent *************
2014-08-04 12:44:01:690 840 1320 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 12:44:01:690 840 1320 Agent *********
2014-08-04 12:44:01:690 840 1320 Agent   * Online = Yes; Ignore download priority = No
2014-08-04 12:44:01:690 840 1320 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2014-08-04 12:44:01:690 840 1320 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-04 12:44:01:690 840 1320 Agent   * Search Scope = {Machine}
2014-08-04 12:44:02:143 840 1320 Misc Validating signature for C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
2014-08-04 12:44:02:174 840 1320 Misc Microsoft signed: Yes
2014-08-04 12:44:02:174 840 1320 Misc WARNING: Digital Signatures on file C:\WINDOWS\SoftwareDistribution\SelfUpdate\Default\wuident.cab are not trusted: Error 0x800b0001
2014-08-04 12:44:02:174 840 1320 Setup FATAL: IsUpdateRequired failed with error 0x800b0001
2014-08-04 12:44:02:174 840 1320 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed: 0x800b0001
2014-08-04 12:44:02:174 840 1320 Setup WARNING: SelfUpdate: Default Service: IsUpdateRequired failed, error = 0x800B0001
2014-08-04 12:44:02:174 840 1320 Agent   * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-08-04 12:44:02:268 840 1320 Agent   * WARNING: Exit code = 0x800B0001
2014-08-04 12:44:02:268 840 1320 Agent *********
2014-08-04 12:44:02:268 840 1320 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 12:44:02:268 840 1320 Agent *************
2014-08-04 12:44:02:268 840 1320 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-08-04 12:44:02:268 840 11a8 AU >>## RESUMED ## AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
2014-08-04 12:44:02:268 840 11a8 AU   # WARNING: Search callback failed, result = 0x800B0001
2014-08-04 12:44:02:268 840 11a8 AU   # WARNING: Failed to find updates with error code 800B0001
2014-08-04 12:44:02:268 840 11a8 AU #########
2014-08-04 12:44:02:268 840 11a8 AU ## END ## AU: Search for updates [CallId = {16B8EC72-AD9E-47D5-9F94-73794A653572}]
2014-08-04 12:44:02:268 840 11a8 AU #############
2014-08-04 12:44:02:268 840 11a8 AU AU setting next detection timeout to 2014-08-04 07:44:02
2014-08-04 12:44:07:174 840 1320 Report REPORT EVENT: {01CB1C52-239F-4DB7-A4AF-C0FBF2E5358A} 2014-08-04 12:44:02:174+1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 0 800b0001 SelfUpdate Failure Software
Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-08-04 16:24:12:878 2748 bc0 COMAPI -------------
2014-08-04 16:24:12:878 2748 bc0 COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-08-04 16:24:12:878 2748 bc0 COMAPI ---------
2014-08-04 16:24:12:878 2748 bc0 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-08-04 16:24:12:878 840 1438 Agent *************
2014-08-04 16:24:12:878 840 1438 Agent ** START ** Agent: Finding updates [CallerId = CcmExec]
2014-08-04 16:24:12:878 840 1438 Agent *********
2014-08-04 16:24:12:878 840 1438 Agent   * Include potentially superseded updates
2014-08-04 16:24:12:878 840 1438 Agent   * Online = Yes; Ignore download priority = Yes
2014-08-04 16:24:12:878 840 1438 Agent   * Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
2014-08-04 16:24:12:878 840 1438 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-04 16:24:12:878 840 1438 Agent   * Search Scope = {Machine}
2014-08-04 16:24:27:769 840 1438 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-08-04 16:24:27:769 840 1438 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://S-Syd-SCCM.xxx.xxx:80/ClientWebService/client.asmx
2014-08-04 16:24:27:816 840 1438 PT WARNING: Cached cookie has expired or new PID is available
2014-08-04 16:24:27:816 840 1438 PT Initializing simple targeting cookie, clientId = fcdcdbf8-529a-414d-9679-9bfbeac1626c, target group = , DNS name = server-util.xxx.xxx
2014-08-04 16:24:27:816 840 1438 PT   Server URL =
http://S-Syd-SCCM.xxx.xxx:80/SimpleAuthWebService/SimpleAuth.asmx
2014-08-04 16:24:28:925 840 1438 Agent WARNING: Failed to evaluate Installed rule, updateId = {07AEE973-703C-4F27-83F1-3E764D9ED2C7}.202, hr = 80041010
2014-08-04 16:25:12:270 840 1438 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-08-04 16:25:12:270 840 1438 PT   + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL =
http://S-Syd-SCCM.xxx.xxx:80/ClientWebService/client.asmx
2014-08-04 16:25:19:083 840 a4c AU Triggering Offline detection (non-interactive)
2014-08-04 16:25:19:083 840 a4c AU #############
2014-08-04 16:25:19:083 840 a4c AU ## START ## AU: Search for updates
2014-08-04 16:25:19:083 840 a4c AU #########
2014-08-04 16:25:19:083 840 1438 Agent   * Added update {1E3A5101-3621-458B-B208-5ED11473EFFF}.101 to search result
16:25:19:083 840 1438 Agent   * Added update {E8A49607-7F8E-47CB-A487-A7465B733A7D}.103 to search result
2014-08-04 16:25:19:083 840 a4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
2014-08-04 16:25:19:083 840 1438 Agent   * Added update {CF3B6409-EBE7-462B-89BE-CF0F9754139F}.101 to search result
2014-08-04 16:25:19:099 840 1438 Agent Bundle contains no deployed children and thus is invalid.
2014-08-04 16:25:19:099 840 1438 Agent Update {3FEFB63F-4DFC-49C4-85DB-D40DD6EA3F22}.102 is not a valid bundle. Not returning it.
2014-08-04 16:25:19:114 840 1438 Agent   * Added update {D5F76FFF-AC16-4460-99FE-FB8334F65970}.101 to search result
2014-08-04 16:25:19:146 840 1438 Agent   * Found 294 updates and 78 categories in search; evaluated appl. rules of 2660 out of 5182 deployed entities
2014-08-04 16:25:19:739 840 1438 Agent *********
2014-08-04 16:25:19:739 840 1438 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-08-04 16:25:19:739 840 1438 Agent *************
2014-08-04 16:25:19:786 840 1438 Agent *************
2014-08-04 16:25:19:786 840 1438 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 16:25:19:786 840 1438 Agent *********
2014-08-04 16:25:19:786 840 1438 Agent   * Online = No; Ignore download priority = No
2014-08-04 16:25:19:786 840 1438 Agent   * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1 and DeploymentAction='Uninstallation' and IsAssigned=1
or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2014-08-04 16:25:19:786 840 1438 Agent   * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-08-04 16:25:19:786 840 1438 Agent   * Search Scope = {Machine}
2014-08-04 16:25:19:802 2748 13ec COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-08-04 16:25:20:036 2748 13ec COMAPI   - Updates found = 294
2014-08-04 16:25:20:036 2748 13ec COMAPI ---------
2014-08-04 16:25:20:036 2748 13ec COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-08-04 16:25:20:036 2748 13ec COMAPI -------------
2014-08-04 16:25:22:208 840 1438 Agent   * Found 0 updates and 78 categories in search; evaluated appl. rules of 251 out of 5182 deployed entities
2014-08-04 16:25:22:302 840 1438 Agent *********
2014-08-04 16:25:22:302 840 1438 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-08-04 16:25:22:302 840 1438 Agent *************
2014-08-04 16:25:22:349 840 4bc AU >>## RESUMED ## AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
2014-08-04 16:25:22:349 840 4bc AU   # 0 updates detected
2014-08-04 16:25:22:349 840 4bc AU #########
2014-08-04 16:25:22:349 840 4bc AU ## END ## AU: Search for updates [CallId = {08745433-443F-4A94-A1C7-44314DA6B63C}]
2014-08-04 16:25:22:349 840 4bc AU #############
2014-08-04 16:25:22:349 840 4bc AU Featured notifications is disabled.
2014-08-04 16:25:22:349 840 1438 Report REPORT EVENT: {547C4CB0-3015-402C-A5DF-9B6B1F900864} 2014-08-04 16:25:19:724+1000 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 CcmExec Success Software
Synchronization Windows Update Client successfully detected 294 updates.
2014-08-04 16:25:22:349 840 1438 Report REPORT EVENT: {22C743C2-863C-4A90-87E3-C8A81850A45B} 2014-08-04 16:25:19:724+1000 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 CcmExec Success Pre-Deployment
Check Reporting client status.

Similar Messages

SCCM 2012 Software updates

Hi All,
We have SCCM 2012 R2 Server, We have been using more than a years ,
Now im facing crazy issues .
1.every month we using sccm server for deploying windows patches .
2.before patching we set maintenance schedules for device group.
3.patch deployment is working fine without any issues and we get the success 100 % compliants report in all the server .
Note:- but after one or two months later in Monitoring-->deployment tab-->its showing only few machines success results or deploying again old package''
this process is keep on rotating in all the deployment .
how to resolve this issues.
Regards,
Velu M

Hi,
You could try to initiate Software Updates Deployment Evaluation Cycle action from a problematic client, then check CIAgent.log, StateMessage.log to see if there are any helpful information.
Reference:
SCCM state messaging–in depth:http://blogs.msdn.com/b/steverac/archive/2011/01/07/sccm-state-messaging-in-depth.aspx
You could also follow the steps in the blog below to check state messages in WMI.
Software Update Compliance Reports – Detection State Unknown
http://blogs.technet.com/b/configmgrdogs/archive/2013/11/07/software-update-status-reports-detection-state-unknown.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Detection state unknown for some updates

Hi
I am trying to run reports on whether certain patches are applicable in my estate. However, running the reports results in large number of clients reporting 'Detection State Unknown'. However, I know the client has run a scan as it has already sent back
data relating to other patches. I can also force a manual refresh of the scan using the control panel applet and check the logs to confirm the scan has completed successfuly.
However, I still receive 'detection state unknown'. This currrently represents over 50% of my servers.
Can anyone help as I am pulling my hair out with this?
Thanks

this is one I use:
Option Explicit
On Error Resume Next
Call RefreshServerComplianceState
' WScript.Echo "Finished"
Sub RefreshServerComplianceState()
    ' Initialize the UpdatesStore variable.
    dim newCCMUpdatesStore
    ' Create the COM object.
    set newCCMUpdatesStore = CreateObject ("Microsoft.CCM.UpdatesStore")
    ' Refresh the server compliance state by running the RefreshServerComplianceState method.
    newCCMUpdatesStore.RefreshServerComplianceState
    ' Output success message.
'    wscript.echo "Ran RefreshServerComplianceState."
End Sub
Kent Agerlund | My blogs: http://blog.coretech.dk/author/kea/ and http://scug.dk/ | Twitter @Agerlund | Linkedin: /kentagerlund

SCCM 2012 software update point issue

The issue of "detection state unknown" (to simplify, use 'unknown' as below) patch report status
The OS in our environment are mainly Win 7 - 64 bits and XP. The typical condition of "unknown" report patch status is as follows:
1) Workstation with Win 7 - 64bits: "unknown" patch report status is appearing
in MS patches for Win XP or 7 - 32bits
2) Workstation with Win XP: "unknown" patch report status is appearing
in MS patches for Win 7 - 32/64bits
The "unknown" problem appears even client scan is completed in the workstation (see the second picture). The problem may be caused by application bug or configuration. Please
kindly follow up and further seek support from Microsoft if applicable.

WSUS was installed and configured and work fine a few monthes ago as a part of the first try to install SUP before aplying SP 1 to SCCM.
Both SCCM and WSUS are installed on the same server.
now we want to deploy all updates from SCCM SUP, and the installation failed.
after researching online, uninstalled WSUS completely from the SCCM server, and removed SUP from the Site and rebooted the server.
installed WSUS 3.0 SP2, when initial config of the WSUS popped up i canceled it, the only config i made
is at the installation wizard, set the port to 8530, folders location and internal DB.
>> i am able to open the WSUS console and connect to the "localhost" but no settings
are configured.
installed update 2734608, reboot.
Installed SUP.
and here we are.

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

SCCM 2012 software update point not sync with Microsoft Updat,

Hi
Recently my SCCM 2012 software update is not syncing with microsoft update, am getting below error. can any one suggest/help me how to resolve this issue.
WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetAuthConfig()
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.InternetGetServerAuthConfig(ServerSyncProxy proxy, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.ServerSyncLib.Authenticate(AuthorizationManager authorizationManager, Boolean checkExpiration, ServerSyncProxy proxy, Cookie cookie, WebServiceCommunicationHelper webServiceHelper)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.SyncConfigUpdatesFromUSS()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)

am just trying to tracert catalog.update.microsoft.com
from my wsus server but it is failed, would that be the reason/
Regards,
Madhan

Enforcement State Unknown issue in SCCM 2012 Patch management report.

Software updates are installed on machine. All updates shown in updates history, but machine not reporting back as Complaint. It showing in Enforcement State Unknown. Please help to resolve the issue.

Hi,
Have you tried to "Run Summarization" while right click the software update group?
If it still shows unknown, please check StateMessage.log on a client that updates show unknown to see whether the state messages have been forwarded successfully.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

SCCM 2012 software distribution not able to distribute content for chrome

Hi I am using sccm 2012, need some advice, thanks! I tried to deploy chrome exe to a xp pc but the PC software centre shows downloading for very long time, more than a few hours. I created a 64bit chrome for a win7 pc and deployment also not working, it
just failed. Then I downloaded a msi installer to deploy to an xp pc, the downloading also takes forever, I checked the distribution content, it's failed. I then created a DP group and add the single DP into it. but still not working. I did the work before
for firefox and it did work before. Not sure what happened. Not sure where to check the log for software distribution, any advice please?thanks!
Thanks and best regards, -- KF

Thanks, Narcoticoo!your advice is helpful!
So, does it mean I can use xxxx.exe /install /silent for all other exe installers? And to find out the detection method, do I have to install the exe on a local pc to find out the actual directory it will install it (Then uninstall it)? and xxx.exe /uninstall
is for uninstallation? Can I create a bat file like chrome-install.bat to have one line like "ChromeSetupStandAloneSetup.exe
/silent /install " as the the actual installer? Why there is a package option below application? it confused me ....
Thanks!
Thanks and best regards, -- KF

SCCM 2012 patch compliance issue

Hi All,
In my organization we are facing patch compliance issue.
in my clients all patches are installed and sent the state messages to MP.however most of the clients are having 0% compliance are showing in report.
in overall compliance report it is showing "compliance sate unknown" for most of the clients.
done the software update scan cycle, no errors in WUAhandler.log and windowsupdate.log
updatestore.log etc.files. however same location only few machines are showing 100% compliance and most of the machines are showing non-compliance (0% compliance)
please help us to resolve the issue.
Note: all machines are patches installed successfully. only report is showing "compliance state unknown"

How much time are you allowing? State messages are only submitted every 15 minutes by the client and information in the console is summarized every 1 hour (both by default); i.e., none of this is instantaneous.
Reports will reflect the up to info though. Have you directly examined WMI on a target system to verify it's patch compliance state?
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SCCM 2012 - Software Inventory Timeout

Hi,
I'm currently using SCCM 2012 R2 in my environment and we are inventorying PST files on our Server collection. The PST Software Inventory job is timing out after 4 hours on some of the servers, which leads to incomplete reporting. I believe the
timeout is occurring due to a large number of compressed files and folders within the directory structure on the servers that are experiencing the issue. We are unable to disable compression on these files and folders. We are also unable to specify
individual paths for scanning as we are trying to discover all PST files on our network.
My questions: Is there a way to increase the timeout settings of the Software Inventory job or is there a different workaround for the above? Is there a way to increase the local cpu priority for the Software Inventory job?
Regards,
Joe Coviello

It's not timing out due to the compressed folders, it's timing out due to the shear number of overall files that on on your file servers.
No, there is no supported way to increase the timeout.
For file servers, ConfigMgr is not the tool of choice -- you should be using FSRM or something similar.
Jason | http://blog.configmgrftw.com

Expiration and Supersedence within an SCCM 2012 Software Update Context

In SCCM 2012 I have put a process together where I wait till the Friday after Patch Tuesday to begin prepping for production Software Update deployments that will take place that following week, beginning on the first Sunday following Patch Tuesday. I wait
till Friday for preparation, because the thought is if I wait till then and synchronize the patches to grab the metadata later in the week, I will not pick up any patches that may have already been superseded or expired that were just released just days before
on Patch Tuesday.
My question is, is this a good practice? I have just been doing it this way for a while, but not sure it this is considered a best practice or what. I guess I am just looking for confirmation and also any other techniques, methods, and\or processes that
may serve me better.
If anyone can offer any input that can give me better insight, I would greatly appreciate it.
Thanks

So how does it work if I sync on Patch Tuesday after the patches are released, and build my packages and deployments right after that and deploy them to the clients and then I re-run another synchronization say on that following Thursday or Friday and find
out that one of those patches that I deployed has already expired or superseded?
Thanks Torsten

MBAM 2.5 integrated with SCCM 2012 SP1 compliance issue

Hi,
I have installed MBAM 2.5 in a SCCM integrated topology. GPO for encryption on the OS drive only have been deployed and encryption completed using the MBAM client. When running the compliance report and evaluating using the SCCM client the compliance comes
back as non-compliant. I have tried several tweaks to the GPO but had no luck getting it to report as compliant. Using the dashboard report to try and pin point why it is non-compliant shows as non-compliant but using the reasons in the top right corner all
have 0 instances.
Is there a log file on the local system that can tell me what aspect is causing the status?

In the Event Viewer, there is MBAM node, you will find all MBAM client events there.
Also, review your GPO and see what encryption types are allowed and which are required. Maybe one reason would be, that your GPO requires something, which your client hasn´t done yet, like PIN code.
I´ve seen issues with not being compliant to policy before, and there was some explanations of this, if you google around. I´m also intrested to get knowing this, because I couldn´t solve this compliance issue.
For customer reporting, I just did query in SCCM where I listed ecrypted status and drive letters, that was a "customized report method" to tell customer, are all their Computers encrypted or not.

USMT to User State Server (PXE) sccm 2012 r2

I apologize if this has been asked before, but I have spent quite a bit of time searching and not really finding any good material or if it was even possible. Our information security officer wants us to scrub all of our assets during the reimage
process. This eliminates the possibility of doing hardlink USMT through PXE. We start all of our images from PXE and don't make the reimage task sequences available through the operating system
My question is there a way to back up to the USMT server from PXE? We are currently running on 2008 R2 and SCCM 2012 R2.
Thanks for any help you can provide!

This thread should answer your above question plus a bit more.
http://social.technet.microsoft.com/Forums/en-US/cbb8e0c7-a365-4c89-bb87-f4096079c452/sccm2012-usmt-boot-to-pxe?forum=configmanagerosd
Best, Jacob I'm a PC.

Detection State 'Unknown' in SCCM 2012 Software Compliance Report

Similar Messages

Maybe you are looking for