Determination Criteria for Questionnaires with Target Group howto transport

Hi Experts,
if I do the Determination Customizing for my Surveys in the Development System I don´t have the Target Groups I am having in Quality or Productive System. As the Determination is Customizing in SPRO, I wouldnt want to change the Target Groups in P System.
How do you handle/ transport this? Do I have to have the same Target Groups in all Systems (with same name)?
Thanks,
Cem

Hi Lorena,
The criteria that you have in Criteria Set might not be matching what you enter without the criteria set. You might want to recheck that. And as far as I remember, you can't setup questionnaire determination for campaigns.
Regards,
Shiromani

Similar Messages

No survey determination in activity when assigning target group

Hi Gurus, how are you?
I`m pretty new to Marketing so I really need your help if possible. I`m using CRM 7.0 and the thing is that I have created a Questionnaires with no problem whatsoever. Then I`ve created a Campaign and again I did it with no further errors.
However I think my problem is in the determination criteria for Questionnaires. For example, I have define the questionnaires determination for a business activity establishing the ID Determination, Description, validity, Transacction Type but without specifying any Criteria Set ID. When I save this customizing and go to to IC to create the transaction type (the same one used in the determination) the Questionnaire is determined automatically which si correct.
The problem arises when I define a Criteria Set with its corresponding description, the Object Type BUS2010020 (Campaign) and the Object Key which is the campaing created before.
After making this definition, if I go to "Determination for Questionnaires:Business Activity" and make a new entry with Determination + Description + Validity + Transaction Type + Questionnaire ID + Active Check + Criteria Set, then when creating the transaction type beforementioned the system does not determined the quesionnaire any more. However, if I delete the Criteria Set from that entry and create the same transaction type again, in this case the system does determine the questionnaire.
Could you please help me?
Thank you very much,
Regards,
Lore

Hi Lorena,
The criteria that you have in Criteria Set might not be matching what you enter without the criteria set. You might want to recheck that. And as far as I remember, you can't setup questionnaire determination for campaigns.
Regards,
Shiromani

Where to see activities, which are created for the campaign with target group

Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
Hamid

Hello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes

Trade promotion with target group

Hi
At my client place, following scenario is present as
Trade promotion with target group is created and then rebate agreement is being generated in R3 and executed.
Here i am facing an issue where , only one rebate agreement is getting created for all partners in target group instead of separate rebate agreement is getting created per partner in target group.
Kindly give me the inputs
thanks in advance
shailesh

BoM in ERP becomes a structured product in CRM when downloaded by the middleware. For TPM, we use them for the display pallet scenario.
Try looking for display pallet documentation
ex: http://help.sap.com/saphelp_crm70/helpdata/EN/ff/e2afec1bc6419395eb34aa2205b788/frameset.htm
Let me know if you need more info.
Regards,
Anik

Searching for material with material group

Hi Friends,
How to get the old material no. material no., description after searching for material with material group.please reply....

SE16
table MARA
field BISMT is the old number
MATKL is material group
table MAKT
MAKTX description
you can make a query join with MATNR
Best Regards

Assign Source of supply is not working for contract with material group

Dear Experts,
I have searched all the threads and gone through before posting my query. So i would ask moderators to go through the thread properly before rejecting this.
We have value contracts with respect to a particular material group without material and with item category W in the contract item, Please note that for the materials with this material group, the source determination is not set and source list is also not maintained.
When we create PR for the material with this contract, and when we click on assign source of supply contracts used to get popped up, but recently from few days, when we click on assign source of supply we are getting an error " no source found for this item ".
Can anybody help on this.
Regards

@ Biju,
As mentioned earlier, we are not creating PR with reference to contract.
first we are creating contract with item category W (material group), without material and plant details.
we create PR with or without material with account assignment K and with the material group in the transaction ME51N, and after inputting all the fields, we click on assign source of supply, it was proposing the existing contracts with respect to material group earlier, but it is not happening for particular material group(it is working for all other material groups)
Hope it is clear.
@ Dev Patra,
we are using DIEN-Service material types and we assign that particular material group to only service material type.
we have not ticked, source list in the material master, we donot have any source list for the materials under that material group.( please check the note 457110- question number 14.)
Regards

Working with target groups in ChaRM?

Has really nobody worked with transport groups in ChaRM??

Hello Elena,
I agree with Prakhar - admin/operator who performs the actual import into production must be VERY careful:
in case when you have several target systems in the transport route, when you release transport from source system, the transport is exported into the buffer of EVERY target system that is defined in the route - no matter how you group your target systems.
In the Task List however each producton system will have it's own CTS project generated.
So your operator must be very well aware of which production system is accotiated with which CTS-project so to execure Import from SCMA correctly, and also be aware of what transports are in the buffer of that system at that time - there will be no pick-n-choose once Import is run.
The import into production will NOT be made via SCMA or the change request itself, but directly in STMS via the QA buffer.
We will generate an email with the target systems and transport request numbers out of the change request and send it to the basis team. They are not going to work in the Solution Manager.
So, actually we need that the target group to be written directly in the transport request itself.
Do you think this is possible?
But I don't agree that it is a good idea to create multiple maintenance projects (i.e. separate for each production system) - if all your PRD* systems are fed from the same DEV... In this case it must be just one maintenance project with multiple target systems, I think.
It is ok if the transports are written to all production buffers.

How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

Extend Enterprise Search for Supplier with business group attribute.

Dear SAP MDG Experts,
I have the same issue. I have to add BP grouping field to the Enterprise Search as search criteria for Supplier and Customer in MDG
Could you please help me.
Thanks
Sachin Kapoor

Hi Sachin
Please follow
Enterprise Search Extension for SAP Master Data Governance

Call list generation with Target group ( 5 k ) records

Hello Experts,
While generating call list for the target group which consists of 5 k records , system is generating call list for few records and leaving the remaining. Is there set process as this no of records to be in target group while generating call list ?? .
Thanks & Regards
Praneeth Chandra

Hello All,
Issue fixed by running calling list in background rather than foreground.
Thanks
Praneeth Chandra

TCODE / Menupath for creating a target group

Hi All,
What is the transaction code/menupath to create a target group of business partners?
How to create a target group of the selected business partners using that tcode/menupath?
Please let me know.
Thanks in advance.
--R D

Hi RD,
Transaction code:CRMD_MKTSEG
Menu Path: SAP Menu->marketing>segementation->marketingsegments--->segment bulider
SAP Help link: <b>http://help.sap.com/saphelp_crm40sr1/helpdata/en/db/58963eac416f01e10000000a114084/frameset.htm</b>
Regards,
Arjun
<b>Don't Forget Rewards points if it helps</b>
Message was edited by:
Arjun Pawar

Using Crystal Report for VS2010 with target Framework 4 Client Profile

I´m need know if is possible use the Crystal Reports for VS 2010 with the framework 4 client Profile. Exists some posibility?
I need use the WPF Crystal Report Viewer, and the export/print mechanism.
Regards

Hi Null,
No it is not, CR requires the full client in all framework versions.
Thank you
Don

Need help adding filter criteria for reports with the GO URL + Post method.

In attempts to hide some of the information from the URL, we've decided to go pull the parameters out of the url used in the GO Url method. We've managed to get it to retrieve the report and display it without showing the user name and password how we cannot seem to pass in any search criterias.
The following is what i have:
Can anyone help me with this issue? or provide any suggestions?
Thanks!
form id="form1" runat="server" action="http://452.342.424.421/analytics/saw.dll?Go" method="post">
<input runat="server" id="Cmd" type="hidden" name="Cmd" value="Answers"/>
<input runat="server" id="nqUser" type="hidden" name="nqUser" value="admin"/>
<input runat="server" id="nqPassword" type="hidden" name="nqPassword" value="admin"/>
<input runat="server" id="Path" type="hidden" name="Path" value="/users/abid.farooq/Countries" />
<input type="hidden" name="Options" value="fr" />
<input type="hidden" name="Action" value="Navigate" />
<input type="hidden" name="P0" value="1" />
<input type="hidden" name="P1" value="eq" />
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
<input type="hidden" name="P3" value="CHN" />

Hi,
Instead of this,
<input type="hidden" name="P2" value="%22Location%22.%22Country%20ID%22" />
can you try this:
<input type="hidden" name="P2" value='"Location"."Country ID"' />
Here, instead of enclosing the value in double quotes, enclose in single quotes. Also replace %22 and %20 with double quotes and space.
Try it and let me know if this helps!
Thanks

Target group from filter criteria of an attribute list.

I have created an Attribute list in the T-code CRMD_MKTDS and a filter criteria for this attribute list.
Now, I would like to use this filter criteria to create a Target Group.
So, is there any Function Module, standard Report program or methods of any standard class to create a target group using this filter criteria ?
How can I determine the BPs related to the filter criteria and assign them to a Target Group?

Hi,
You can use class 'CL_CRM_MKTTG_GENIL_TG' or Function module ''CRM_MKTTG_TG_READ'
to create Target group's from Profiles.
Hope this helps.
Regards,
Anup

Surveys for particular target Group

Hi All,
I am attempting to create a survey for a specific target group. To do this I am using the SURVEY transaction. In the SAP documentation after creating the survey and Inserting a new question, it states to click on TRANSFER. This should allow me to enter question text. However the TRANSFER option is not available to me. Has anyone come across this before?
I have created surveys using CRM_SURVEY_SUITE but can only attach these to transactions and not to specific target groups?
Any ideas on how I could get around this.
Thanks in advance,
Mícheá

Hi Nagarajan/Joseph
Thanks for the replies.
i got this query which has been used when Quantity in GRPO > PO a approval template comes like the pic shown below
"Select Distinct 'True' from POR1T0 Where $[$38.11.Number] > T0.Quantity and T0.docentry=$[$38.45.0]
Like this when there is change in the PO quantity compared to GRPO this approval pops up
.But quantity would come in row level rite ?.
Please let me know how this query can be modified when comes to item group
Thanks & Regards
Darshan Desai

Determination Criteria for Questionnaires with Target Group howto transport

Similar Messages

Maybe you are looking for