Determine destination storage bin from PP-form

Hello,
From an adobe form (based on PSFC_KANBAN) I try in the print program to determine WM-data. To be specific I need the way from the supply area (or other pp-data) to the destination storage bin (Table PKHD).
It would be very kind of You, if you could give me a hint.
Kind regards,
Benjamin

Benjamin,
I am not sure but may be you can see the program RLLS4100 or TCODE LS41.
With this report, you can create cycle lists which are assigned to a storage type.
You receive a list with the following information:
Production supply area
Material
Plant
Warehouse number
Warehouse type
Production storage bin
Dynamic destination storage bin
Staging indicator for production supply
Try also TCODE OP42 and PK05.
The discussion below might help you:
http://scn.sap.com/thread/3172596
Regards,
Ashvin

Similar Messages

  • WM auto determination for storage bin

    Hi experts.
    In the WM , presently auto TR-TO is designed and the system determine the storage Bin automatically. when we transfer the stock from interim.
    My question if the material is maintain in more then one sotrage bin. How the system determine the storage bin?
    regards
    DP

    Dear,
    With stock determination, you can use strategies for material withdrawal for goods issues and stock transfers if the material is maintain in more then one storage bin.
    Stock determination allows you to determine stocks from different source.
       In Customizing of the materials management, you determine a cross-application strategy for stock determination under Materials Management --> Inventory Management and Physical Inventory --> Stock Determination --> Define Strategies for Stock Determination. The system should reduce the stocks on the basis of this strategy.
    You assign a stock determination group to the material in the material master record.
    In Customizing of materials management, assign the stock determination rule to application Warehouse Management under Materials Management --> Inventory Management and Physical Inventory --> Stock Determination --> Assign Stock Determination Rule in the Applications --> Warehouse Management.
    Regards,
    R.Brahmankar

  • Yard Management ( capacity of destination storage bin )

    Hi Experts,
    In sap yard management how to find capacity of destination storage bin , is there any field to check?
    Regards
    Anji

    Hi,
    Yard management (LE-YM) does not enter in the warehouse.
    Therefore there is no destination storage bin relation.
    On the other hand, there are capacity checks for trucks at location like door, staging area, parking spaces...
    Best regards
    Alain
    Reward points if helpful

  • Same Storage Unit number for both source & destination storage bin

    Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
    An early response is very much appreaciated

    Hello,
    You absolutely right.
    I've made necessary cust. settings berofe posting goods receipt with storage units:
    Customizing storage units number ranges:
    And storage units customizing:
    And also in Material Master:
    But i don't see the storage unit type number in storage bin:

  • Error - No destination storage bin to be found in storage type

    Hi all,
    this is my flow -
    Create STO PO - ME21n
    create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
    create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
    confirm TO- L_TO_CONFIRM
    Using BDC i am doing PGI for VL02n
    create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
    confirm TO- L_TO_CONFIRM
    Create GR - 'BAPI_GOODSMVT_CREATE'
    Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
    No destination storage bin to be found in storage type 104
    I have added 2 lines in the FM at exception part -
    error_message = 16
    OTHERS = 32.
    So my return code for the FM -  L_TO_CREATE_DN (_FOR i/b delivery)_is 16
    message class : L3
    message number : 009
    message type : E
    No destination storage bin to be found in storage type 104
    Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
    Pls help me.
    Sen

    Hi all,
    Thanks for your replies.
    Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
    Storage Bin search Strategy:
    (1) By storage section: Not active
    (2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
    I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
    This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
    When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
    Hope my scenarios are clear. Thanks in advance for your help again.
    Best regards
    Nagarajan

  • Proposal of same destination storage bin as source storage bin

    I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

    Hello,
    I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
    This should solve your problem.
    Regards,
    Sathish

  • Destination storage bin determination issue

    Hi Experts,
    When we deconsolidate the ASN, some of the products getting into correct destination bin and some products are not getting into correct destination bin, getting into one inbound over flow storage type defined. When i looked at product master, strategies and storage types configuration the difference i see between actual storage types and overflow storage type is:
    1. HU requirement option. i.e. for actual storage types - HU requirement not allowed and for Overflow storage type - HU requirement allowed but not requirement.
    2. For actual storage type ---- Mixed storage selected as "several HUs with different Batches of the same product" for putaway rule: Addition to existing stock/empty bin and for Overflow storage type - Mixed storage without limitations
    Can you please help me if anything is wrong with above selection at storage type level?
    Thank you...
    Sridahr
    Message was edited by: SRIDHAR B

    Hello,
    I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
    This should solve your problem.
    Regards,
    Sathish

  • Destination storage bin problem

    Dear SAP GURUS
    i am facing a problem the scenario goes like this.
    I have created the sales order, and delivery and then done the picking using the delivery order's subsequent document by creating the transfer order and then confirmed the transfer order by lt12 the status is also coming as picking C and the WMSTATUS C now when i am trying to do the postgoods issue it is giving me the problem of
    " warehouse XXX 916 not found"?
    i have not done the putaway stratergy. can anybody help me with the problem please.
    why is that so is it because that i have not done the PUTAWAY stratergy or is it something else.
    please help me with this regards.
    thanks and regards

    Dear Yogesh,
    Check these settings in the IMG
    IMG->Enterprise structure>Definition->Logistics execution>Define, copy, delete, check warehouse number
    IMG->Enterprise structure>Assignment->Logistics execution>Assign warehouse number to plant/storage location.
    Make sure that you done the proper settings for ware house management
    IMG>Logistics execution>Ware house management
    I hope this will help you,
    Regards,
    Murali.

  • Storage type & Storage Bin determination in MB1B

    Dear all,
    I want to configure the system like this-In MB1B T-Code for movement type 301 system determine storage type and storage bin from where Stock has been transfer.How I achieve this?
    Thanks & Regards
    Dipayan Bose

    Hi
    This is possible in standard SAP once you save the Material document.. Make sure your Plant and storage location have warehouse assigned.
    Do transfer posting in MB1B with Mvt type 301 with Plant and storage location.
    Alos ensure your material master has been extended to WM 1 & 2 views.
    Check in MB03 for the Item details there is button called WM parameterer click this to see the storage type & Bin
    System has to create the Transfer Requirement document then only you can see the storage type & Storage bin and this is possible once you save the transfer posting document.
    Hope it is clear.
    Karthik

  • Picking from another storage bin

    During picking TO creation the system automatically determines the source storage bin from where the materials should be picked. Lets say the items to be picked are not there and cannot be picked. In this case the operator should be enabled to pick from another storage bin, however the system does not allow this. (This is via mobile data entry and in a bulk SU manages st. type).
    Is there a way to allow picking from another storage bin? If not, can the TO be created without any source determination? Even if I switch off picking strategy, the system expects entry of source bin at TO creation.

    Hi,
      With out a source storage bin , pick TO cannot be created currently. If at all you want a different source bin, you have to cancel the TO, block the current bin and then recreate the TO. That is an exceptional case and should be handled inside the system.
    Thanks
    Vinod.

  • WM how to determine storage bins manually for a multi row transfer order?

    Hi to everyone. in our WM configuration, SAP system is posting transfer requirements automatically according to goods receipt. After that, we want to post transfer orders with reference to recently created transfer requirement.
    We prefer to use Logistics> Logistics Execution> Internal Whse Processes> Transfer Requirement> Display> LB12 - For Material Document
    Then choose the transfer requirement we want and press "TO in foregr." button. For single material documents, there is not a problem, we can easily determine the storage bin(s) we want to transfer materials. But in multi material transfer orders there is not an option to choose storage bins in "Create TO from TR: Overview of Transfer Requirement" screen. it is expected from us to "generate TO item" and "save" without entering any storage bin addresses. after that, system automatically send materials to storage bins according to customizations and the material master data.
    I want to know, if there is a possibility for us to choose the storage bins we want in multi material transfer orders which are created from transfer requirements. Any help will be highly appreciated.
    Thanks in advance.
    Mehmet Akif EREK
    İDO SAP MM Responsible.

    Standard program: RLVSDR40
    Standard report: LVSLESCHEIN
    The path for configure the documents that we want to print when we create transfer orders is: SPRO --> SAP REFERENCE IMG button --> Logistics Execution --> Warehouse Management --> Storage Units --> Activities --> Define print control.

  • Print of Storage Bin details in GR slip

    We have done goods receipt (GR) in a Storage location with is Warehouse managed.
    We have setting where the Transfer order is created and confirmed automatically as soon as GR is posted.
    We print the GR slip and we need the Storage bin to be printed for every line item. We need the destination Storage bin detail from the Transfer order created.
    Now is it possible to have this scenario?
    Which program is called first? Printing of GR or Creation of Transfer order?
    Please help me with the logic to get the Storage bin information in the Goods receipt slip.

    done

  • Change destination storage during putaway

    Folks,
    I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
    Thx,
    MdZ

    Hi Csaba,
    it was exactly what I read when I have this problem:
    "No destination bin can be entered during confirmation for
    dynamic coordinates
    transfer orders with return subitems
    Lean WM (if the destination bin is defined in the movement type)
    posting change TOs
    inventory based on putaway
    additions to existing stock in storage units
    stock removal from or putaway into bulk storage
    two-step confirmation
    transaction Confirm single item
    the case where you are using a putaway strategy
    all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
    stock removals from a bulk storage managed with storage units"
    As I wrote Continuous inventory upon placement into stock  indicator must be unchecked.
    Andrzej

  • Addition to stock in storage bin

    Hi,
    in the customizing LE-WM-Master data-Define Storage Type  I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
    MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
    How can I achieve this?
    Regards

    Hi Jürgen
    When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M"  and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
    These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
    The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
    Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
    The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
    And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
    Please your inputs will be really appreciated

  • Restrict certain Storage location from getting displayed in CO06 !!

    Dear all -
    We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
    in CO06.
    I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
    Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
    I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
    Thanks
    Arun
    Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

    Dear,
    System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
    Check in BOM component details storage location you have defined.
    Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
    Also check the Material requirements planning (PP-MRP)
    --> planning process
      --> BOM explosion and dependent requirements determination
        --> storage location determination for BOM explosion
    Regards,
    R.Brahmankar

Maybe you are looking for