Determine installed version of iPhone apps?

Is there a way to determine the currently-installed version of my iPhone apps? I am just curious because a number of them have released updated versions, and I'd like to figure out what I have now before upgrading. I'm on iOS 4.3.5.

No way to do that on the phone itself, but you can do so in iTunes: right-click any app in your iTunes library, select get info.

Similar Messages

  • I just lost my iphone5 in a foreign country. Was not able to register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Please help!

    I just lost my iphone5 in a foreign country. Was not able to  previously register it with icloud and have not installed the findmy iphone app. How can i wipe out my data remotely without these setups? Is there any good app i can use to track it? Please help!

    No, nothing you can do to track it if you did not take any measures before the loss.

  • TS3376 just installed find my iphone app and when I logged in on the app and on the computer, it showed the location of someone else's iphone in the same building as me!!!! how does this happen and what do i do to see mine instead?

    Just installed Find my iphone app and when i logged in on the phone and then on my computer, it showed me somebody else's device that is in the same building as me and not my device...how do I fix this?

    we have problem solved:-)

  • I lost my ipad how to track it .have not installed find my iPhone app on my ipad .

    I lost my iPad Air .. How to trace it . Itz only a week I have got it .. Have not installed find my iPhone app in my ipad .. Itz is a wifi + 3G model .. What to do?

    You do not need to install the "Find My iPhone" App.
    If you had "Find My iPad" enabled in Settings > iCloud then you may be able to locate it. If not, you cannot locate it.
    If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPad" has not been disabled on it. Note: Disabling "Find My iPad" is much more difficult in iOS 7.
    If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    See also here for additional information: http://support.apple.com/kb/HT5668

  • How to find back my lost iphone 5s if not install "Find My Iphone" apps

    How to find back my lost iphone 5s if not install "Find My Iphone" apps&software...???

    There is no way sorry
    If your iPhone, iPad, or iPod touch is lost or stolen

  • How to determine installed version of EMET via script?

    Hi all,
    I was not able to find a easy way to determine installed verison of EMET via script. If you can guide me in the right direction, this would help a lot.
    Many thanks
    Sam

    This is probably not the right forum for scripting questions and you didn't specify which script you (want to) use... Below you can find some examples...
    If you use VBscript you could use WMI and query the class Win32_Product:
    strComputer = "."
    Set objWMIService = GetObject("winmgmts:" _
    & "{impersonationLevel=impersonate}!\\" _
    & strComputer & "\root\cimv2")
    Set colSoftware = objWMIService.ExecQuery _
    ("Select * from Win32_Product where Name like '%EMET%'")
    For Each objSoftware in colSoftware
    Wscript.Echo "Name: " & objSoftware.Name
    Wscript.Echo "Version: " & objSoftware.Version
    Next
    This method is not advisable because the class isn't optimized for queries and therefore the query takes a long time!
    You can also use the Windows Installer object:
    Option Explicit
    ' Connect to Windows Installer object
    Dim installer
    Set installer = Wscript.CreateObject("WindowsInstaller.Installer")
    Dim product, products
    Set products = installer.Products
    For Each product In products
    if instr(1,installer.ProductInfo(product, "InstalledProductName"), "EMET", vbTextCompare) > 0 AND instr(1,installer.ProductInfo(product, "Publisher"), "Microsoft", vbTextCompare) > 0 then
    Wscript.Echo installer.ProductInfo(product, "InstalledProductName")
    Wscript.Echo installer.ProductInfo(product, "VersionString")
    End If
    Next
    Set products = Nothing
    Set installer = Nothing
    Wscript.Quit 0
    This method enumerates all the products but be aware that you should also check the installstate because the installstate of a product also can be advertised.
    You can also use powershell to enumerate the uninstall registry keys but you have take into account that the results may be different on a 64-bit Windows and the bitness of the powershell proces:
    gci "hklm:\software\microsoft\windows\currentversion\uninstall" | foreach { gp $_.PSPath } | select DisplayVersion,DisplayName | where { $_.DisplayName -match "^EMET*" }
    You can also install and use the
    Windows Installer PowerShell Module and use this command:
    get-msiproductinfo | where { $_.Name -like '*EMET*' } | select ProductName,ProductVersion  | format-list
    On the internet you can find a lot of information about your question. For instance I found these pages:
    http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/15/use-powershell-to-find-installed-software.aspx
    http://blogs.technet.com/b/alexshev/archive/2008/06/30/from-msi-to-wix-part-17-windows-installer-automation-interface-part-2.aspx
    W. Spu

  • HT4865 What do i do to find my lost iphone? I did not install find my iphone app

    I would like to know how to find my lost iphone using icloud. I did not intall find my iphone app. It is an iphone 4 and the version was ios 5

    Can you explain what you mean by "partitioned an external drive to my mac intel"?
    If you repartition a drive, that will always erase the whole drive. Is that what you did? Did you use Disk Utility, or something else? Disk Utility does say "To erase and repartition the disk..." so it does warn you what will happen.
    Matt

  • Determine what version of iphone 4 I have.

    Not sure of the version of IPhone 4 I have.
    Is there a way to find out? I think it is Iphone 4 only, but when I checked my phone for upgrade trade in value it said it was an Iphone 4s.
    Thanks in advance.
    Want to upgrade to new Iphone 5s

    Check the model number from: Settings - General - About - Model = ???
    Post that number at: http://iphonefrom.com/

  • Location of iPhone sync data files or How to not have to re-install all my iPhone apps?

    Hi Folks,
    I recently did a clean install of Lion on my MacBook Pro and I've chosen to not use Migration Assistant because I don't want to move over a bunch of cruft under my 4+ year old home directory (Tiger > Leopard > SL).  I've been very selective about the things I've moved over and all has gone well until I want to sync my iPhone.  I've transferred purchases from the iPhone but if I check Sync Apps, iTunes wants to wipe and re-install everything!  This wouldn't be a problem, except the time it would take to re-organize all my apps on the iPhone again.   (Side note: Please Apple, give us an "auto-organize" button for apps!)
    Any idea how to move over my old sync data files to avoid having to nuke/reinstall my iPhone's apps?  Or is there another option to preserve how my apps are organizated?
    Many thanks in advance,
    Rob

    Skyler Richard wrote:
    Setting it up as new will not put anything over, then when you sync it will sync the applications over and it will sync the applications over Un organized.  My advised should resolve the issue, I work for technical support for the iPhone's, iPad, and iPod Touchs for Apple...
    Right Click the iPhone and click Transfer Purchases and then do the backup and restore from backup... That will transfer all your applications over to your computer and then organize them properly in their folders...
    OK, that does make sense so I won't bother setting it up as a new phone.
    Quick follow up question though, do I need to click the Sync Apps check box before I do a restore?  The reason I ask is that I've done a transfer purchases/backup/restore cycle but all the tabs (Apps, Music, Movies, etc.) do not have the sync check box checked following the restore as I would expect.  And when I go check the Sync Apps check box that's when it warns me "Are you sure you want to sync apps?  All existing apps and their data on the iPhone will be replaced with apps from this iTunes library."  That's when the apps then become unorganized.
    Thanks so much for your continued help!
    Rob

  • I have lost my iphone can i get it and i have not installed find my iphone app

    i lost my iphone can i get it back

    The only way to locate/disable/erase any lost/stolen iPhone is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
    If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
    If locked with a passcode, all a thief or whoever finds it has to do is force the phone into recovery mode & restore it. While this deletes all data on the phone, it also removes the passcode so the phone can then be used as a phone or touch.
    There is NO WAY to report any lost/stolen product to Apple.

  • Viewing iphone apps on ipad

    Hello Everyone,
    I recently bought an iPad2. When I synced it to my iTunes account, I knew that all of the apps I have purchased that work on the iPad and iPhone would be transferred to my iPad. I didn't think any iPhone only apps would be transferred. However, when I went to the App store to look at the iPad versions of my iPhone apps, it shows that the iPhone versions are installed on the iPad, but I don't see the icon. I can search the iPad and find the iPhone only app and open it but again I cannot find out how to open this just by selecting its icon. Is there a setting or something where I can have the iPhone only apps show up on the iPad? Thanks.
    -gigascott

    Unless you de-selected the apps on the Apps tab when syncing to your computer's iTunes then all compatible apps would be synced - only those where you might have a high enough iOS version or iPhone apps which require full phone capability wouldn't be synced.
    On the iPad all apps should show, there is no 'hide iphone apps' settings (though some apps can be hidden via Settings > General > Restrictions, in which case they wouldn't show up in searches). If you can only find the apps via the spotlight search screen but not just by going through your homescreens, then how many homescreens have you got - there is a limit of 11, after which apps can only be accessed via the search screen, though you can use app folders to make of them 'visible'

  • IPhone app installs fail with Notification of iTunes pre-order from 2009 "Top 5..." by Matt Giraud

    Whenever I try to install/update an iPhone app I get notified of a old 2009 pre-order which is now expired. If I tap Not Now then install aborts. If I tap OK then install starts and then fails with "Cannot connect to iTunes Store". If I then repeat the same install it completes fine. Can anyone help me remove this annoyance?

    Whenever I try to install/update an iPhone app I get notified of a old 2009 pre-order which is now expired. If I tap Not Now then install aborts. If I tap OK then install starts and then fails with "Cannot connect to iTunes Store". If I then repeat the same install it completes fine. Can anyone help me remove this annoyance?

  • Session Expires on Kuler iPhone app

    I installed the Kuler iPhone app on my iPod Touch and my iPad (retina display) and on both, after less than a day, when I go to the app, it has lost my login credientials - or something.  Basically, my themes are not there and when I click on the My Account tab my Account name and ID are not shown and yet the Sign Our (not the Sign In) button is there.  So it thinks I am still signed in but does not retain my credientials.  So I have to logout and longin again, which is a pain because my password is complex.

    Yes.  It is not happening anymore on my iPod Touch, but when I saw your response, I re-logged in last night on my iPad and when I oppened the app just now, the next day, when the app opens, it showed my saved colors, then it showed a box turning indicating that it was updating the app I assume from the server, then all of my colors are gone.  I click on My Account and there is nothing next to "Account" and my ID is there next to Adobe ID for about 1 second and then it vanishes.  The Sign Out button is below and stays there as is.

  • I am trying to sync my iphone 4. Get error :"itunes cannot sync apps to the iphone because the apps installed on the iphone cannot be determined"

    I wanted to sync my iphone 4 (cdma).  I have synced it before successfully.  I am getting an error "itunes cannot sync apps to the iphone because the apps installed on the iphone cannot be determined" and the apps and items follwoing apps in syncing (photos for example) will not sync. Items prior to apps synced (calendar/contacts).  I restarted both my iphone (currently on ios 4.2.8) and my computer, itunes was on 10.6.1, same problem.  I installed itunes 10.6.3, same problem.  I had been waiting to update ios to 5.1.1 and would like to do that now, but wanted to sync first.  Anyone have any ideas?  I am stumped!  Thank you.

    Hello glenysfromwm
    On your computer, try the download link below to get the latest version of iTunes to download so you can sync with your computer.
    iTunes 11.1.5
    http://support.apple.com/kb/dl1614
    Regards,
    -Norm G.

  • The software on iphone has expired + Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined + Can't restore = Help!

    Hello guys, I'm begging for your help, I've read so many threads, nothing works for me. I hope you will try to help me
    First message I get when I connect the iphone is
    "The software on iphone has expired and must be updated to a newer version"
    Then it tries to backup but I get
    "Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined"
    When I click check for updates it says I have the latest version (5.0)
    When I try to restore I always get "iTunes could not backup the iphone because a session could not be started with the iphone. Please disconnect and reconnect the iphone, then try again"
    Tried that MANY times but no luck.
    This iphone was on a developper account but it is not anymore (removed from developper account).
    I'm the administrator on my PC. When I'm on the summary of my iphone it shows N/A as my phone number.
    Back up to icloud doesn't work because I didn't set it up before it stopped working
    When I try to activate it directly from the iphone I always get "Could not activate iphone. Your iphone could not be activated because the activation server is temporarely unavailable..." (for the past 3 weeks :s)
    I can access my music and everything from itunes.
    I even tried to restore it from the ispw file (using shift + restore) but I got an error message (sorry I don't remember which one) but it didn't work.
    I also tried device manager, select PC, scan hardware for changes (read it worked for some) but not for me after that I don't get the
    "The software on iphone has expired and must be updated to a newer version" and "Itunes cannot sync apps to the iphone because the apps installed on the iphone could not be determined" ...I just get "Itunes could not back up iphone because a session could not be started with the iphone" + "itunes could not sync because a connection could not be established with the iphone"
    Please help me make it work again! I'd go to an apple store but I'm in south-east asia at the moment and there is nothing like it in 700km +
    This little machine would be perfect to travel with, it's a shame it just stopped working like 3 weeks ago, just said I needed to activate it again ...
    Thanks a million times!

    I can't access it on the iphone as I said
    On itunes in summary I have  "Software version: 5.0"
    Yes I tried to restore it
    "When I try to restore I always get "iTunes could not backup the iphone because a session could not be started with the iphone. Please disconnect and reconnect the iphone, then try again" ...did that many times but always the same error message
    "I even tried to restore it from the ispw file (using shift + restore) but I got an error message (sorry I don't remember which one) but it didn't work."

Maybe you are looking for

  • ITunes no longer launches on my Windows XP system, tried reinstalling but it keeps giving me an error message...please help!

    Whenever I launch iTunes on my computer, I get a message that states "Problem with Shortcut: The drive or network connection that the shortcut 'iTunes.link' refers to is unavailable. Make sure that the disk is properly inserted or the network resourc

  • Notification issue:wf_notifications mail_status is null, status is CANCELED

    Hi All, In our HR systems, we use workflows extensively and in one of our custom workflows we send a notification to one group mail box. The FND_USER is defined and the group mail box address is given correctly. In the workflow we recursively send no

  • BT Infinity Speed - I feel Mislead/Cheated - will ...

    I had my line upgraded to BT Infinity option 2 on the 18th of April.  I was quoted an estimated speed on the checker before placing my order of 24.1mbps (Generally within +/- 2 Meg above or below). When the engineer left my premises he informed me th

  • Install Solaris 11 on a RAID-1 mirror ZFS pool?

    Hi all, Sorry if this question has been asked here before. I've searched docs.oracle.com about Solaris 11 and didn't see any related info. I am installing the new Solaris 11 on my Dell Tower desktop workstation with two 3TB SATA hard drives. I am pla

  • Robotics

    Hello everyone, i try to make mobile robot simulation using labview using A-star path planning. whymy robot does not move in simulation when i run the program ? i attach together with the vi... i really need help.. Attachments: A-Star simulation (Cre