Determinig IPC Requirements (urgent)

I need to tune some parameters about IPC
I ´ve already changed :
MAXSERVICES, MAXGTT, MAXSERVERS
I used the tmboot -c command but I don´t
know how interpreter de output for define IPC value.
I have a doubt about how define MAXACCESSERS too.
Does someone know how can I do it?
please,
reply to: [email protected] or [email protected]
Thanks,
Andre Silveira David
Systems Engineer

I need to tune some parameters about IPC
I ´ve already changed :
MAXSERVICES, MAXGTT, MAXSERVERS
I used the tmboot -c command but I don´t
know how interpreter de output for define IPC value.
I have a doubt about how define MAXACCESSERS too.
Does someone know how can I do it?
please,
reply to: [email protected] or [email protected]
Thanks,
Andre Silveira David
Systems Engineer

Similar Messages

  • Does IPC require an SAP CRM system ?

    Hello,
    we need to install the SAP Internet Pricing and Configurator (IPC).
    Does this IPC require a CRM landscape ? As we have ERP usage type...
    Many thanks!

    Hi Raghvendra,
    Open ur CRM system configuration from portal
    <i><b>system administration -> system configuration</b></i>
    locate ur CRM system under portal content and
    Right click on <i><b>crm system open->object</b></i>.
    now Under Property Editor from property catogory select ISA B2B (internet sales B2B application)
    <i><b>ISA B2B Description --> description.</b></i>
    <i><b>ISA B2B host name ---> j2ee_host.domain.com:port</b></i>
    <i><b>ISA B2B path ---> /b2b/b2b/init.do</b></i>
    <i><b>ISA B2B Protocol--->http</b></i>
    Hope this helps.
    Rgds,
    Vivek
    PS: Pl reward points if found useful

  • Help required  urgently please help

    i am facing problem on oracle 9i platform the problem is
    ORA-00379: no free buffers available in buffer pool DEFAULT for block size 16K
    WHILE I AM EXECUTING THIS SQL COMMAND
    SELECT * FROM PR_RMRDDATA_M
    PR_RMRDDATA_M IS ONE OF MY VERY BIG TABLE

    BPeasland wrote:
    I guess a response after 4.5 months means the help was not required urgently. ;)
    Cheers,
    BrianGlance at the timestamps again...
    It wasn't 4.5 months. It was a year and 4.5 months.
    <insert smiley emoticon here>
    Additionally, the original poster abandoned the thread after they stopped shouting at everyone.
    Their username profile shows they almost never return to mark anything "resolved".
    This thread is now locked to prevent more "me too" resurrection posts.

  • ... PPL Help required Urgent for Viewing Data

    Hi . sorry for such simple question..
    I have displayed 3 different blocks on a same canvas1 and one block on tab canvas placed on the canvas1
    Now i made a menu bar where one of my menu is
    view data.
    behind that menu i m writing the code.
    select st_id from Site where st_id = :txtstid;
    but when i compile it says bad bind variable :txtstid;
    when i remove the colon, it says identifier required txtstid...
    Now what to do..
    Then i wrote..
    go_block('Site');
    go_item('item1')
    and now it compiled properly but when i run it .. it is not giong to that item..
    may b i m doing something wrong.. how to interact with menu s..
    cant i put the same functionality behind them as we do behind button press triggers..
    I need to do it urgent so kindly asses what is happening ..
    cant we place more than one block on same canvas and then access thier items
    with the block name.
    like Site.stid.
    stid by the way is the text item.. that contains the site ids.. at run time..
    Kindly gimme some advices. the form is so large that it is not easier me making it again..
    BR

    One more thing ppl...
    the same fucntionality is working behind the Button i have created..
    so plz help it out.. BR

  • GroupWise Help Required || Urgent

    hi Experts,
    please help me on below queries -
    (A) Create Contacts in Global Address book in Novell GroupWise server manually. i have exchange servers in my Organization and i want to view my exchange mailboxes in GroupWise Address book so that my users can directly send mails to exchange users via Address lists.(external contacts in exchange are known as mail contacts/contacts. also i dont want to use any third party tool for Dirsync/migration purpose).
    (B) Set Forwarder on GroupWise Mailbox so that new incoming mail will be deliver to remote domain recipient (exchange mailbox) with or without delivering to GroupWise Mailbox locally). i don't want to configure client rules to achieve this goal. i need this to be done via central administration tool for GroupWise servers.
    (C) if we create External Contact with different Email Domain Name (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this condition can we assign additional email address to external User. so that my external user will have both GroupWise SMTP Email Address and Exchange SMTP Address. in this case new mails to my GroupWise ID should be delivered to my exchange Mailbox because i don't want to keep mailbox in Groupwise
    it is really urgent and any information or step by step docs or Urls are really appreciated.
    i have gone through the non-groupwise domain creation document but not sure what server and domain name entries i have to put during configuration for Non-Groupwise domain and external users. also what would be GIWA configuration. please provide me the SOPs if any one has already done this in past.
    regards,
    Aanand Karki

    AanandKarki wrote:
    >
    > hi Experts,
    >
    > please help me on below queries -
    >
    > (A) Create Contacts in Global Address book in Novell GroupWise server
    > manually. i have exchange servers in my Organization and i want to
    > view my exchange mailboxes in GroupWise Address book so that my users
    > can directly send mails to exchange users via Address lists.(external
    > contacts in exchange are known as mail contacts/contacts. also i dont
    > want to use any third party tool for Dirsync/migration purpose).
    >
    > (B) Set Forwarder on GroupWise Mailbox so that new incoming mail will
    > be deliver to remote domain recipient (exchange mailbox) with or
    > without delivering to GroupWise Mailbox locally). i don't want to
    > configure client rules to achieve this goal. i need this to be done
    > via central administration tool for GroupWise servers.
    >
    > (C) if we create External Contact with different Email Domain Name
    > (i.e. @XYZ.Com, which is my exchange SMTP Domain) and we have Primary
    > Domain as @ABC.Com (this is my GroupWise SMTP Domain), in this
    > condition can we assign additional email address to external User. so
    > that my external user will have both GroupWise SMTP Email Address and
    > Exchange SMTP Address. in this case new mails to my GroupWise ID
    > should be delivered to my exchange Mailbox because i don't want to
    > keep mailbox in Groupwise
    >
    > it is really urgent and any information or step by step docs or Urls
    > are really appreciated.
    This is all handled by our new GroupWise/Exchange coexistence solution.
    There's no need to create anything manually on either side. With
    coexistence configured, users on both sides automatically sync as
    contacts on the other side, plus you also get free/busy searching.
    Here's the documention on coexistence.
    http://www.novell.com/documentation/.../bookinfo.html
    Please note this also requires some additional licensing. Please
    contact your friendly Novell sales rep or partner for more assistance.
    Your world is on the move. http://www.novell.com/mobility/
    We know what your world looks like. http://www.novell.com/yourworld/

  • Not geeting the proper excel output as per the client requirement .Urgent

    Hi all,
    I have a rtf and i want to take the report output in ms-excel format .....
    I am able to get the excel out put but the problem is that for one of the field in rtf "COMMENTS" .... it contain the detail text of 100 to 120 words ....
    as per client requirement they want this "COMMENT" data in one line in excel output .
    can any rtf design expert suggest me how to get this output in excel format as per my client requirement .....
    Please advice.................ITS URGENT
    thanks in advance
    RP

    Hi all,
    I have a rtf and i want to take the report output in ms-excel format .....
    I am able to get the excel out put but the problem is that for one of the field in rtf "COMMENTS" .... it contain the detail text of 100 to 120 words ....
    as per client requirement they want this "COMMENT" data in one line in excel output .
    can any rtf design expert suggest me how to get this output in excel format as per my client requirement .....
    Please advice.................ITS URGENT
    thanks in advance
    RP

  • Function module required--Urgent

    Hi Friends,
    I have a requirement where in I have to get the final date if I add some days to the initial date.
    For example I have the begin date as 11/02/2007...I have the number of days as 91...If I add these days to the initial date I will get the final date.
    Is there any fm to achieve the same if i have the initial date and number of days...Please let me know..Its bit urgent
    Susmita

    hi ,
    you dont have to go for any function module.You can directly add the number of days to the date for getting the final date.try this example..
    parameters:
      p_date like sy-datum,
      p_days type i.
      p_date = p_date + p_days.
      write p_date.
    regards,
    veeresh

  • Help required URGENTLY regarding 9iASWE - logged in Username

    Hi,
    I have installed Oracle 9iASWE. I have been able to create services and access it through ptg/rm.
    One of my service needs to access the username through which the user has logged in. I have tried creating the bind variable :_User as a input parameter in my service. But i have not been able to get the user name . Can anybody tell me how do i exactly get the user name.
    Please reply if more details are required to get the solution.
    Please reply ASAP.
    email: [email protected]
    regards.

    Hi,
    Thanks for the reply. But we are not using URL Adapter.
    We are using a SQL Adapter and calling a stored procedure from it.
    We are using the :_User variable to get the username, but cannot figure out a way to pass it from the SQL Adapter to the procedure.
    Please help.
    regards
    Kamlesh

  • Identification of wiki required : Urgent help

    Hi,
    I dont know whethere I am putting my question at right place or not. But I need very urgent elp to solve the proble.
    My Problem : We have web page in which there will be many widget and one of the widget will be "Wiki widget". After clicking the wiki widget, user should be redirected to wiki application, where user wants to create WORKSPACE. With workspace, user can upload and download file and many more facility. That workspace should be created at server. Workspace must have Read / write permission.
    My current working application is running at meeting conferencing device. I want to use the wiki in the device where logged in user can work with WIKI also. The application is based on java/j2ee, linux/ windows and Tomcat 5.5 server.
    I want to know the name of the WIKI , which can be integrated with my application with above mentioned features.
    Please help me to identify the name of the wiki. That wiki should be freeware / No license.
    I know one wiki � CONFLUENCE� but this is not freeware. The features should be almost same as CONFLUENCE� .
    My mail id : [email protected]

    Hi,
    I removed your duplicate post.

  • J2ME Help required (URGENT !!!)

    Hello everyone,
    Well I'm a newbie to this J2ME thing, I am working on a project right now which requires me to develop an application for my mobile phone Sony Ericsson W810i. This application accesses the on board camera and take images after every 1 sec and keep on saving the last 2 images in 2 different files or buffers. Once the images are obtained, Sobel Filter (Image processing) is applied on it for edge detection. Can anyone please help me with this all, I am really desperate and time is running out.
    At the moment, I found this code on Sony Ericsson Developer forums which works perfectly fine with my W810i, the link to the code is as follows,
    http://developer.sonyericsson.com/site/global/techsupport/tipstrickscode/java/p_java_0403.jsp
    Well this takes one image and shows it on the canvas, however I am still trying to figure out a way to remove the question it asks whenever i press the button SNAPSHOT, it asks "Do u want to allow the application to access Camera?", is there a way to remove this as well. Please let me know.
    Last thing, the getSnapshot is used as vc.getSnapshot(null), i read and changed it to vc.getSnapshot("encoding=jpeg");
    This works fine with my mobile as well, but now i cant find any help on how to apply image processing on this encoded jpeg !!! Well please reply, as much as u know, u dun have to answer all the questions, any information regarding this is helpful, I'll be extremely grateful !!!
    Thanks a lot,
    Regards,
    Mubin Khan

    Hi mobeenkhan
    You know, people are helping out voluntarily here. So it always helps to ask nicely. :-)
    This is what you need to know (not really, since you probably won't use it)
    A signed MIDlet may request higher access rights for specific actions by asking for them in the MIDlet-Permissions attribute of the MIDlet&#8217;s application descriptor.
    The permission name for audio / video recording is:
    javax.microedition.media.control.RecordControl
    The permission name for camera snapshot is:
    javax.microedition.media.control.VideoControl.getSnapshot
    Try a Google search for "jad permissions midlet media camera".
    And check whether, in your SE W810i, you can set the pernission for camera ( it may be called media access etc.) to 'Ask once per application' or something like that. This will be set from the File Manager (or Application manager, I haven't handled the W810i, only SE I've dealt with is the k700i), not when the app is running.
    If your application isn't digitally signed, you probably won't be able to select a setting like 'Never Ask' -- and a digital signature can be fairly expensive, not something you might want to go for unless you're going to earn something out of marketing your products.
    Be nice to everybody :-)
    Darryl

  • Qurestions asked in interview-answers required urgently

    1)how to trigger idoc in case of idoc to file scenario ?
    2) how to generate idocs for each header data in the file ?
    3)how to see xml payload in the RWB?
    4)how to pick the files of different streams placed in the FTP server?
      is there any connection of path expressions to it?
    5)how to get the same file name in th e receiver side without mapping?
    6)is it possible to develop integration objects in xi without using IR?
    7)how to hadle exceptions without using BPM?
    8)what is a CLIENT PROXY? and SERVER PROXY ?
    9)what does the characters mean in the drop down list of pattern \d,\d+,\c,\c+ ?

    Hi
    Trigerring IDocs
    We trigger IDocs using the we19 tool of R/3 system.
    Otherwise write a report program that triggers IDocs or using the concept of activate pointers.
    URGENT:I need to trigger an idoc..HOW
    In IDX5 you can monitor the messages that come from the R/3 system.Double click on the message and you can see both the inbound and outbound Payload.
    6)is it possible to develop integration objects in xi without using IR?
    /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
    Handling Exceptions without BPM
    XI/PI: Throwing Generic Exceptions from any type of Mapping
    /people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
    Throwing Smart Exceptions in XI Graphical Mapping
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    "Fast return" with Java exceptions
    /people/valery.silaev/blog/2007/05/15/fast-return-with-java-exceptions
    Errors, Exceptions, and Asynchronous Web Services
    /people/udi.dahan/blog/2007/03/27/errors-exceptions-and-asynchronous-web-services
    Thanks

  • Procedure for pricing calicualtions on ipc: very urgent

    Hi gurus
    I am working on crm 5.2 and i have to do caliculations of custom fields by using the pricing conditions and display the result on custom fields. My questions is As i am new to this, plese tell me the procedure how we can do that or what is the procedure and what user exits can be used..very urgent
    Thanks
    shashi

    Hi Shashi,
    Maybe you can check the documentation in note 809820.
    Hongyan

  • Help For Reimbursements requirement - Urgent

    Dear All,
    Requirement says: - Reimbursements are part of employee CTC -
    Employee CTC consists of -
    Basic - 10,000
    HRA- 4000
    CEA-200
    Med- 1250
    Petrol Remb- 1250 - yearly - 15000
    Proff. Dev Remb-1250 - yearly - 15000
    Car Maintce Remb-1250 - yearly - 15000
    Here, Petrol. Prof. Dev and Car Maintce rembursement will be paid once the bills are submitted. However, For instance the employee submits the bill on 1st Apr 2014 then he should only be paid 1250 and not 15000 because in the month of April he is eligible for 1250 only and this amout will also get prorated if there is any LOP's. Now, I have tried with this with the PC00_M40_REMP t.code, but it doesn't work that way coz it doesn't check monthly eligiblity and Client also expects that if the employee submits a bill of 15000 in April then the system should only pay 1250 and the rest amount should be auto-carry forwarded for the rest months and he shall be paid 1250 for rest of months, whenever he is eligible.
    Could you please help me to tackle with this requirement? Your help is really appreciated

    Hi Anusha,
    Either write a PCR for the same or Go for Off cycle payroll ...
    Make an entry in IT0267 for a month once bill has been received...& for a particular month & run off cycle payroll.....
    By doing this you will have a separate payslip too..... for tracking reimbursement claim....
    hope this should solve your issue...
    Regards,
    Veeram

  • IPC requirement does not effect sales order

    Hi,
    I wrote a pricing requirement  in java extending RequirementAdapter.
    I uploaded it to the CRM system. When the requirement  is called, it writes messages to the VMC log and i can see the result of the requirement  : "true" or "false" .
    The problem is that the result of the requirement  does not effect the condition in the sales order - nothing happens no matter what the result value is.
    What should I do in order to get an error message in the sales order when the requirement returns false?
    Thanks
    Tomer

    Hi Michael,
    If the requirement will not trigger any error message by default according to the returned value, what excaly do I need to do in order to achieve that? Is there a BADI or user exist  where I can check the returned value and raise the message?
    Thanks,
    Tomer

  • Table Maintanance Help Required-urgent

    Hi All,
    I generating table maintanance generator for the table zuser_Secobjects. In this table GUID is a primary key and APPLN,APPLN_TYPE,PARTNER_TYPE are the non primary keys.  I am using two screens method here. on both screens i am not showing GUID ( i am hiding this field in screen1 and screen 2) whenvere new record is created for every record guid is going to create. now my reuirement when i click on position(pushbutton) name in screen 1 it has to show APPLN,APPLN_TYPE,PARTNER_TYPE where as these 4 fields are non primary keys . i am getting uniqire record using guid. so i am keeping guid as primary key.i can't keep these 4 fields as primary keys in the table zuser_secobjects.
    anybody can faced this kind of problem if so please let me know whow to approach in this case.
    thanks,
    maheedhar.t

    Hai Maheedhar,
    I have also faced the related problem.
    <b>Please refer the below links.</b>
    <b>It will helps you a lot.</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    Table Maintenance generator is required to do Manual entries in the Table. If the requirement is to update the table only programmatically and not manually then table maint. generator is not required.
    Manual entries in table can be maintained ( New record can be inserted / existing can be modified ) using transaction SM 30, if the table maintenance for the table is generated.
    <b>Don'forget to activate it.</b>
    How to activate Table maint.
    Goto SE11 and open the table.
    Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
    <b>Please refer the below links.</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    <b>Reward points if it helps you.</b>
    Regds,
    Rama chary.Pammi

Maybe you are looking for

  • How to delete parent child relation in Toplink

    Hi All, I have 3 tables A,B,C. In Table A ,I am saving record. Table B & C has parent child relation. B-->Parent C-->Child So I want to save records in Table A. And delete from child(C) 1st then from parent(B). I m writing my code as, em.getTransacti

  • IMovie 9.0.7 Crashes After Optimize Images Completes

    Here's the crash log - can anyone help please? Process:         iMovie [389] Path:            /Applications/iMovie.app/Contents/MacOS/iMovie Identifier:      com.apple.iMovieApp Version:         9.0.7 (1768) Build Info:      iMovieApp-176800000000000

  • Best practice with otr texts in wd

    hi, when I enhance a wd component I want to work with otr texts and I have two questions: 1. Is the best way to store the otr texts in a separate new package or in the still existing package of the enhanced wd component? 2. Makes it sense to fetch ev

  • E-Rec 6.04 Doubts with transaction pa48.

    Hi, We are on E-Rec 604 with seperated standalone e-rec system. When I run pa48 transaction y realized that I have two doubts. First of them is that if there is a customizing table to change the action type wich propose for the two options, New hire

  • Event on Print Button

    Hello ABAPers, I use an ALV in a screen, and use a copy of the standard status (from the function group SALV) STANDARD_FULLSCREEN, which contains the menu and ALV toolbars. If the user chooses Print (fcode = $RNT) and executes the printing, I must ex