Determining HOOK_URL for ECC 6.0

Hi Experts -- I am on ECC 6.0, we do not have SRM, etc.  How do I determine what the value should be for the Hook_URL?  I saw some SAP documentation that suggested leaving it blank but that seemed to be for SRM and does not work in my case.
Thanks
Doug

Hi Doug,
The value of HOOK_URL should be kept as Blank and the Type should be 4-Return URL.
Below is the help text of field Type.
Type 4 (return URL)
The name of the return URL is dependent on the catalog. You must not fill the Contents field since this field is determined dynamically and transferred when the catalog is called.
Note
You have to maintain all catalog-specific call parameters before the
entry with type 4. The four named SAP internal parameters have to follow the
entry with type 4:
Name
Contents
Type
HOOK_URL
4
~OkCode
ADDI
2
~Target
_top
2
~ForceTarget
Yes
2
~caller
CTLG
2
The return URL is transferred in encrypted form.
Best Regards,
Anil

Similar Messages

  • Hardware Resources For ECC 6.0

    Hello,
    Can anyone assist me in determining the hardware requirement
    for ECC 6.0 installation (Server config. CPU, RAM, DISK SPACE etc.)
    Thanks & Regards,
    Sumit

    It all depends on the no.of user/ DB / OS.  Quick sizer is good tool to opt for.
    Run the pre-requisite check and select all ABAP and JAVA components in the list and it will give all the required information in the final summary report.
    For better performance 8-16GB RAM for dual stack is good.

  • Contract Replication SRM 7.0 for ECC 6.0

    I am in the version 7.0 of SRM and I need to send the contract PCTR of SRM for ECC 6.0. 
    - Connections SM59 is well; 
    - Attribute CT_PROC_TY of the structure is well; 
    - Transaction Types and Number Screech is well; 
    - IDOCs BLAORD y defined COND_A in WE20 is well; 
    Did I forget something? 
    All creates the contract and I try to distribute the same, the mistake below it is exhibited: 
    " Could not determines back-end system goes contract " 
    Determination of Back End is well. 
    Some idea?
    Rgs,
    Pedro

    Hi, Pedro:
    It is SRM Extended Classic mode?
    You want to transfer the contract to ECC？
    Please check the ECC and SRM both sides of the scope of the contract number.
    Sarah

  • Could not determine recipients for message type BUPA_INBOUND_MAIN_SAVE_M

    We are upgrading CRM from 4.0 to 7.0
    While synchronizing a business partner from CRM to ECC, the IDOC control Data section shows no information on the "Receiver Information" Section.It also provides error as "Could not determine recipients for message type BUPA_INBOUND_MAIN_SAVE_M" with error No 29, Outbound Error in ALE.
    The Message Type (BUPA_INBOUND_MAIN_SAVE_M) and the Basic Type (BUPA_INBOUND_MAIN_SAVE_M03) was not used in the CRM 4.0 and not sure the reason it apprears now in the IDOC.
    The relevant BDOC is not created/shown in transaction SMW01.
    We have verified WE20,21, BD64 in ECC
    Any advice is greatly appreciated.
    Regards
    Dhina

    Hi,
    Please check below note if it helpful to you in resolving the issue.
    Note 1447734 - Enhancement of message type BUPA_INBOUND_MAIN_SAVE_M
    Thanks,
    George

  • APEX SSO and Load balancing: Could not determine workspace for application

    We had a single HTTP Server serving APEX in a 10.2.0.2 database configured with SSO to be used by the developers. APEX has been registered as a partner application and the login url has been CA Siteminder protected so that the SM_USER details are forwarded in the header for the application to use for authorization. Everything is fine so far.
    Now we have added a HTTP Server on another host and have it all set up for APEX and its pointing to the same database. APEX_ADMIN access works as normal, but applications previously using SSO now get the following error after entering the URL.
    Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
    Error ERR-7620 Could not determine workspace for application ().
    Using HTTP Watch I find that the application is not even trying to redirect to the login page.
    What is wrong here?

    APEX has been registered as a partner application as described in
    http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
    In the meantime I found metalink document 368746.1 which describes the cause of this problem. Please read carefully what I wrote, it all works when the the new APEX web server is turned off in the server farm on the load balancer and directed through the original web server. When running regapp.sql the hostname in the listener token was using the virtual hostname. This works fine if the request comes from the original APEX server which proofs that there is nothing wrong with the installation and set up of SSO. When directing the request to the new APEX web server the APEX_ADMIN page still works only existing work spaces using SSO don't seems to work anymore resulting in a error as described in the subject.
    As for metalink document 368746.1 naming the causes of this error:
    - there are no duplicate entries in WWSEC_ENABLER_CONFIG_INFO$
    -LISTENER_TOKEN clearly works for requests coming from the first web server
    -theoretically the web server listener port could be changed from 7777, but port 80 needs to be maintained here as production is mimiced as far down as possible.
    Is there some cache table which can be cleared? How is it that the flows schema (apex engine) can not find the work space when the request comes from a new web server which can however access the APEX_ADMIN pages.
    anyone?

  • Territory and partner determination procedure for employee responsible

    Hi CRM team,
    I have a little issue for you I'll be very thankfull if someone could help me.
    There is the organisation of the territory management in the company I'm working for:
    -Country
    -Region
    -sector
    *each sector have a determination rule based on 1 condition "1 field from the BP Header (customer)"
    *each sector have a position assigned to it. (Organisational model PPOMA_CRM) And there is 1 or 2 employee affected to each position..
    *When creating an activity,*
    *First thing I enter the Account (customer: activity partner)*
    *I would like the system to determine the employee affected to the sector of the BP as the employee responsible.*
    Any Idea?
    For the moment, I'm searching in the partner determination procedure. But the standard access sequence Business Partner Relationships: Activity Partner -> User dont work.
    There is some sitting from my IMG:
    The partner fonction Employee Responsible is with
    *fonction category: employee
    *usage: CRM
    *Relationship category: Is the employee responsible for
    Partner determination procedure:
    In the acces sequence, I put a dialogue seq 15 : 
    Business partner from territory
    And in the detail on source, I put:
    Fonct. categ. : Employee
    Usage: CRM
    It dosn't work...
    I don't know if I'm am searching in the right place.
    Could you help me with a solution to have the needed system behavior????
    Thanks a lot for your time and your help.
    Best regards,
    Ahmed.

    Hi Ahmed,
    After created determination rules for territories have executed the report CRM_TERRMAN_PROC_REL for initial option?
    Once territories and determination rules are created, you need to run the above report in Background(schedule a batch job) which will establish relationships between the territories and corresponding attributes. You need to run this report every time there is a change in determination rule of create/change territories.
    This should resolve your problem
    Regards,
    Priyanka

  • Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

    I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
    I do not use the below variables as in the below eror in my query at all. Please assist.
    Diagnosis
    This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
    Termination message BRAIN 632 appears:
    Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
    System Response
    1.     Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
    With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
    With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
    0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

    Hello,
    you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Transfer rules are not exist for ECC Quality source system in BI Dev

    Hi,
    I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data  I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
    When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
    only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
    Regards,
    chandra

    Hi Fayzrakhmanov
    Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
    The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
    Help on this would be appreciated.
    Thanks

  • Enter a business location for ECC 6 EHP 5 (Taiwan)

    Hi,
    While releasing the billing doc to accounting we are getting the error Enter a business location
    Message no. F5A192
    We are working on ECC6 EHP 5 and this requirement is for Taiwan.
    I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
    Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
    Or any other suggestions.
    Thanks & Regards,
    Student.

    Hi,
    Please check the below thread.
    Error Enter a Business Location for Korea
    Regards,
    P Gomatheeswaran

  • "Partner Determination Steps  for Customer Master" clarification

    Hi,
    Let me clear myself at the outset itself, that I searched SDN for my below mentioned query, however I could not find any answer to my satisfaction....here I am posting again
    In "Partner Determination for Customer Master", the following steps are undertaken -
    Step 1:
    1.a.) Create New Partner Determination Procedure 
    1.b.) For each Partner Determination Procedure, different Partner Functions, which are applicable for that specific determination procedure, are assigned. (along with other properties like if the PF is mandatory, not modifiable )
    Step2:
    "Partner Determination Procedure Assignment", here we assign different Partner Determination Procedure to different Account Groups. In other words, indirectly, we assign the partner functions to account groups. Right? (Please correct me if I am wrong)
    Step3:
    "Partner Function". Here we define new partner functions, (which are used in Step 1...)
    Step4:
    "Account Group- Function Assignment" - Here we assign the Partner Functions to Account Groups
    Now My Question
    (A) Since the Partner Functions are assigned (via partner determination procedure) to account groups in Step 1, then why Partner Functions are assigned AGAIN to account groups in Step 4. What is the significance of this assignment in Step 4.
    (B) Is there is particular sequence of Steps (1 to 5), one should follow when somebody has to create new customer account group and/or new partner function.
    Thanking you all in advance.

    Dear SR
    Leave SAP Partner Determination screen for 2 minutes and first understand the logic
    1. Create the new partner functions
    2. Create the new determination procedure
    3. Link the new  partner functions to the  new determination procedure and add mandatory, non modifiable ,optional creteria
    4. Assign the new  determination procedure to the document type or account group at appropriate level
    This is essence and this is for all  8 levels like CMR,sales doc header,item etc
    Now coming to your qn
    When you define a new account group ( you might be aware account group controls partner functions of CMR) you will say that your  new account group  will carry out patner functions like SP,SH,BP,PY
    That is ACCOUNT GROUPS  function assignment
    Whenever you create a new account group  you will do field selection in OBD2 like suppress optional.reqd etc,create no ranges and assign no ranges and also mainly this activity partner determination
    These are must settings for a new account group
    AG is the german key for sold to party Partner determination procedure
    This is step 1
    Then in next step you will tell AG will carry out such and such partner functions Step 2 like mandatory not modifiable etc
    Step 3 is link the AG to your account group
    Step 4 is partner functions say if you want to create a new partner function say SB special stock partner
    (in concept this is the firststep)
    Step 5 is once again partner function account group  assignment
    So when you create a new partner function you will do step 4 first and step 5 and then 1 and 2 and 3 
    when you create a new account group you will do step 5 and then 1 and 2 and 3
    Hope you understand now
    Partner functions are relatives in your family
    Say in a family we have Father ,mother sister, brother (these 4 partner functions)
    This is called as Happy Family  and this Happy Family  is the Partner determination procedure in SAP
    This Happy Family  is linked to the account group
    So Happy family means there are 4 partner functions
    So whenever you create a CMR in the account group this father.mother,brother,sister will come as default
    Suppose you add another partner function say Uncle
    First you have to create uncle
    Then you have to tell this account group will accept uncle
    Then link the uncle in the happy family that is determination procedure of SAP along with the 4
    Then assign  happy family  to the account group
    Now when you create a CMR along with father.mother,brother,sister  along with that uncle will also come
    Regards
    Raja

  • Replication Issue for ECC BP to CRM BP

    Hello Experts,
    I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
    Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
    PLEASE HELP!!

    Hello Shoaib ,
    In the CRM as well as ECC system in the customising SPRO :
    Cross-Application Components   >SAP Business Partner
    Business Partner   >Basic Settings
    Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
        >  CUBP Grouping could be missing in any one of the systems. Could you please check this.
    Thanks & regards,
    Krishnen

  • Determine Fields for Business Card on Area Page -  does not show on portal

    Hi,
    I'm trying to add new fields on the overview page of service personal data IT0002
    I found "Determine Fields for Business Card on Area Page" in customizing and added new field, but it doesn't show in ESS portal service.
    Does anyone have any advice what I need to do to make it work?
    Settings
    Infotype 0002
    Infotype Vers. 09
    Structure name: HCMT_BSP_PA_DK_R0002 / HCMT_BSP_PA_XX_R0002
    Field name   Long field label   Position
    FAMST        Marital status      4
    Br. Olof

    Bizcards is only customizable via IMG as of EHP3
    Lower releases might require additonal steps/modifications
    For EHP3 you need to ensure you are using EHP3 software components and have EHP3 business
    function switched on (be careful though switching on this function is only reversal via restore to point in time
    before switching it on) - also check note 1159911 if you  have switched this one and/or see no fields
    Worth also trying the following
    Check V_T7XSSPERBIZFLD for existing fields and positions
    Add supplementary fields and position numbers to V_T7XSSPERBIZFLD
    OR
    Check V_T7XSSPERBIZFLD for existing fields and positions
    Overwrite required positions and fields in V_T7XSSPERBIZFLC
    Best wishes
    Stuart

  • Error in ALE service 29 Could not determine recipients for message type MAT

    Hi Experts,
    While transferring the material using ALE am getting  error 29 ie   'Error in ALE service'  and message is 'Could not determine recipients for message type MATFET'.
    Also i ve recieved the materials with the proper status al the end am getting the above error.
    Kindly help me out.
    Thanks in advance.

    Hi ,
    Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly  in WE20 in sender system.
    Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
    Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
    Regards
    Vikas Chaudhary

  • Account determination error for EK02

    Hi,
    I am using EK02 for unit costing in quotation used specially for PS.
    I have assigned EK02 in the quotation doc type and have added the same to the pricing procedure (marked it manual & ststistical) and assigned it SubTotal-B.
    It is working perfectly in the quotation but while in Sales Order it is giving account determination error for EK02.
    I am unable to understand when there is no account key assigned to it, how is this error ?
    Please advise immediately.
    Regards,
    Rajesh

    Check the Requirement class in order - in procurement tab.
    when you use the EK02 cost estimation condition type, Controlling documents get generated once you save the sales order.
    i.e. the reason, in VKOA for the all the access keys maintained in order pricing procedure, should have valid record with Costing conditon type:KOFK.
    maitain entries in table:005- Account key for all the account keys maitained
    such as;
    Application / Condition type-KOFK/ chart of accounts/ Acct key - G/L account ( here maintain same G/L account which have you assigned with Condition type KOFI)
    it will solve your issue.

  • ST-PI and ST-A/PI Plug-Ins is it neccessary  for ECC 6.0 ?

    Hi Friends,
    Please guide me,
    In Early Watch Alert report, it recommends ST-PI and ST-A/PI Plug-Ins for ECC 6.0.
    Is this plug-ins really needed for ECC or not , if needed where( which scenario ) they are useful.
    Thanks ,
    VKP.

    Hi,
    I checked in our server i got this result
    No.   Missing addon/ transport / note
    1. [Note 69455  ]      Addon ST-A/PI 01M_ECC600
    2. [Note 69455  ]      ST-A/PI Addon Supportpackage SP01
    3. [Note 69455  ]      Proc. after addon impl.
    4. [Note 539977  ]     Addon ST-PI 2008_1_700
    5. [Note 539977  ]     ST-PI Support Packages
    6. [Note 12103  ]      Collectors and TCOLL
    Successfully implemented addons/ transports/ notes
    7. [Note 207223  ]   EWAlert setup
    1 to 6 add ons are they compulsory or 7 ( EW setup ) is ok
    Thanks,
    VKP.

Maybe you are looking for