Determining Release Number of OIM AD Connector

Once the AD Connector is installed in OIM how do you tell if you've installed version 9.0.3 or 9.0.4? Reading the manifest files before deploying easily tells you what you're installing, but after it's installed you're supposed to check the version numbers in the Form Designer which are not the same -- it does not say 9.0.3 or 9.0.4, instead it reads:
AD User Form: AD4.6.0
AD User Group Details: version 9
AD OU: Initial Version
AD Groups Information: 4.6.0
How do I know if this is 9.0.3 or 9.0.4??

Yes, before deployment I guess the official way to get the connector version is to check the manifest.mf in the xliActiveDirectory.jar as value of the Version property.
Once deployed, the release number of the connector is the value of the Version field in the process form (Form Designer).
For more check out the documentation on
http://download.oracle.com/docs/cd/E10150_01/doc.904/e10158/intro.htm#BABIDAGI
Rgds, Ajay

Similar Messages

  • Unable to determine the number of SMSs generated by the message

    In JES5, I tested the SMS logging with two options; standard and xml.
    In both cases, I was unable to determine the number of SMSs generated by the message.
    However, such information can be found in the debug log;
    If i enable the debug logging, the desired information is available:
    10:15:41.59: 2-fragment(2250): The message will be sent as 4 SMS messages
    Nevertheless, Debug logging cannot be enabled all the time since it is pretty verbose.
    It was said that XML based logging released in JES5 will include the number of messages in the mail.log_current.
    But i dont find such information in it.
    Would anyone please tell me if this is applicable?
    what parameters should be changed or modified in order to make such
    information appear in the mail.log file?
    Thanks!

    I've not examined the doc, but I suspect that at least one of the option logging settings will do that for you. Please do have a look at the "channel option files" and the logging levels.

  • Verifying BOE XI Release Number

    Issue : How to Identify BOE XI Application's Release Number
    Questions :
    1.  What's the surest way of determining the Release Number of a particular installation of the BusinessObjects Enterprise XI application?
    2.  Can the Release Number be found on one of the CMC administration pages?
    I searched the SAP Community Network Forums to see if this issue has already been addressed, but it appears it wasn't. If it was, please paste a link to that thread.

    Jeff,
         Thanks for your quick response.  You gave a good answer.  The path you outlined led, in my case, to the following version information:
              CMC > Home > Organize Servers > (yourservername).CMS > Metrics > Version : 11.5.9.1076
         From a post on the BOB website I learned that version 11.5.9.1076 corresponds to BOE XI R2 SP3.
         There I also learned of an alternate CMC web page that provides the BOE XI software version information, namely:
              CMC > Home > Manage Settings > Properties > Product Version : 11.5.9.1076
    [ see : "Determining what is installed" (topic #106395) on the BusinessObjects Board website ]
    Edited by: OSoccer on Jan 12, 2010 8:06 PM (Closed the question.)

  • How to determine the number of rows to be displayed in a report

    hello experts,
    Has anyone ever come across this requirement before? Before a report finishes being executed and before it displays the results, is there a way to determine the number of rows to be displayed as the result?
    Many thanks in advance.
    Regards,
    Inma

    Hello Arun,
    Thanks for your reply but do you know which method I should use for this purpose if I use the table interface?
    Thanks,
    Inma

  • Error when determining  a number from object BI_ODS

    Error When determining a number from object BI_ODS and number 01  when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
    plz need solution.

    Hi,
    Number ranges can be maintained through the transaction SNRO. For details check:
    http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
    Rgds-
    Sonal

  • Error when determining a number from object BI_TSDTEL and number 01

    Hi BW Experts,
    After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
    "Error when determining a number from object BI_TSDTEL and number 01
    Object name can only contain characters from syntactical character set
    Object name can only contain characters from syntactical character set
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Data element for InfoObject KOKRS 0CO_AREA could not be created
    Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
    It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
    Transfer structure 0IM_FA_IQ_2_SA does not exist
    Error RSAR 440 when handling objects with type R3TR ISTS."
    I have gone through the Note: 674818.
    Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
    Because  I have not seen the Intervals in R/3 ( Dev & QA) systems.
    please could someone provide Inputs for this.
    Thanks in Advance
    Regards
    SK

    Hi,
    Try to see that transfer structure is existing in the sytem which is connecting in
    the BW quality.
    You need the same to be transported from the development server of R/3 to quality server of R/3.
    Just check if this helps.
    Regards
    Rahul Bindroo

  • Scheduling agreement in SD, release number

    Dear All,
    I trying to implement an automatic process for one customer, getting in an EDI 862; transferring this in an IDOC message type DELINS of Basictype DELFOR02 and updating the scheduling agreement accordingly.
    This is working fine, for simple cases, but this customer is sending different release numbers for the same product at one time, and also sending the release numbers multiple times.
    e.g. today I am getting for product A a release number 111 with multiple schedule lines, and also a release numberr 112 for the same product with multiple schedule lines.
    tomorrow I might get again an EDI 862 for this same product, containing revised information for release number 111 and 112.
    This is in my understanding not matching the SAP logic, where it's clearly stated, that a new release number is replacing completely the old release number.
    Does anybody has any idea how to implement such a process?
    I already have studied all documentation, tried to implement it in different ways, but I am reaching every time only a 80 % solution.
    Do we have in this community any experts on scheduling agreements on the SD side, which might be able to help me?
    Thanks for any possible help.

    check these
    BAPI_CUSTSCHEDULAGREE_CONFDELV Customer Sched. Agreement: Confirmation of Delivery; Document Flow Upd
    BAPI_SALES_DEL_SCHEDULE_CREATE BAPI for creation of releases in scheduling agreements

  • How to determine the number of pixels of a desired object within a digital photograph?

    Hi everyone. I want to determine the number of pixels in an object that is part of a digital photo. I use cameras to film chunks of ice breaking away from ice cliffs or tidewater glaciers. I want to know the size of the ice chunk that my digital photographs capture. I know the width and height of the ice cliff in metres already, so I was thinking that I could convert the equivalent of 1 pixel : ? metres - this is really what I want to do. That way every time I see a chunk of ice breaking off, I can pull up the photo, outline the chunk, calculate how many pixels fill the area of ice removed by the chunk breaking off and convert to metres area 2 - thus giving me my size order. If anyone has ideas on how to do this I would really appreciate it, thanks so much community. I was thinking that Photoshop or Fireworks could help me with this, Ricky

    Thanks gener7 and normfb.
    The Photoshop help measurement page is brilliant and I think I can use the info on that page to work out my iceberg sizes. Check out the attached photo - you are looking at an ice cliff - essentially the front of a tidewater glacier that flows in the ocean. I'm a research student and I look at the process of iceberg calving - this is the term we use to define the sudden breaking away or detachment of ice chunks from glaciers that end in the sea.
    I used the lasso tool to crop the area of ice lost as a single chunk of ice detached from the ice cliff. At the same time I had the histogram window open. The histogram showed me how many pixels were contained in the cropped area. What I need to do now is work out what 1 pixel is equivalent to in metres. Soon I will have a digital elevation model for the ice cliff that will offer centimetre to metre scale resolution of the surface topography - so that should really help. The photographs I have are taken every 30 seconds - which is brilliant for documenting how the geometry of the ice cliff adjusts in response to detaching ice pieces and also because the ice is moving. I am a research student in Canada, and at the time I took the photos we measured that the ice cliff was advancing at a rate of approximately 12 metres per day! That's pretty fast. The flow of the ice is a first order control on the rate of iceberg production - you are essentially pushing ice into the ocean where it breaks off. I'm having to learn everything Photoshop from scratch...so please bare with me because maybe some of the photoshop questions I ask are simple to most!
    I noticed the "integrated density" function on the help sheet you suggested. This function also provides the square number of pixels contained in the cropped area I select...I guess this is similar to the histogram right?
    Either way - i just need the scale conversion to go from 1 pixel : metres or cm equivalent. At that point I think I will have to manually select every single iceberg event from my time-lapse photos and do this the manual way!  I have about 800 events to manually digitise and calculate the area for...
    Thanks everyone, Ricky

  • How to determine the number of messages in a queue, that ...

    Hi,
    what's the proper way to count the number of the messages in an Advanced Queue that are currently visible to consumers?
    Currently we use:
    select count(*) from aq$queue_tab_name q where q.QUEUE = 'Q_NAME';
    The problem with that approach:
    If one consumer dequeues a lot of messages in one transaction, that change in the number of messages visible to other consumers is only made visible after the consumer issues a commit. Before the commit is issued, the above "select count(*) ..." statement (issued from a different DB-session) does not reflect the fact that one consumer consumed a lot of messages, messages that are not available to other consumers anymore (only exception: the original consumer issues a rollback sooner or later).
    So before the commit is issued:
    -the consumed messages are NOT visible to other consumers anymore (which is intended behaviour)
    -but the "select count(*) ..." statement (issued from a different DB session) does NOT reflect that fact
    So the case could arise that the queue becomes empty, while "select count(*) ..." says that e.g. 1000 messages are still in the queue.
    Is there a solution to this problem?
    PS: For our use-case we need these dequeue option :
    dbms_aq.remove;
    dbms_aq.first_message;
    dbms_aq.on_commit;
    Again, the queue itself works correctly, I just need to find a way to determine the number messages that are currently dequeable / visible to the consumers at specific point in time.
    I couldn't find a func/proc in dbms_aq for that purpose.
    Best wishes
    Peter

    The following might be of interest in better understanding the issue you are facing in a broader context:
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5771117722373

  • Function Module to determine the number of pages in a pdf file

    Hi All,
    Is there any standard function module to determine the number of pages in a pdf file?
    Thanks,
    Sai

    Hi unk2,
    There's no functionality in the Acrobat.com online services to do a character count. But, you could use ExportPDF to convert your PDF file to Word format, and then do your character count in Word.
    Please let us know if you need additional assistance.
    Best,
    Sara

  • Determine the number of lines of textfield or floating field

    Hi,
    Is there a way to determine the number of lines of text in a textfield or in a floatingfield.
    My problem is that I'm creating a form with three tables(made of subforms) underneed each other that needs to be set to hidden when the total of rows is greater than 25.
    Now it would be easy to just count the rows but these rows can exist of multiple lines of text.
    The fields of my row are floating fields so when the text is bigger than the displayable width the text continous on a new line in the same row. So I need to know when this happens because now I can show only 24 rows.
    I tried counting the characters but this doesn't work, when there are a lot of 'i,j,l' or other small characters I can place 40 characters in my textfield, but when there are a lot of 'm,w' characters I can place only 22 characters in my field.
    I also tried to use xfa.layout.h(TextField1,"cm") to determine the height of the field, but it always retuns the value -1. I get the same -1 with the y or x - position.
    Does anybody have an idea how to solve this problem?
    Thanks in advance,
    RonnyR

    oops ... i got it thanks.
    code below -----
    for(var i=0; i <= s.length-1; i++)
    sCurrentLetter = s.substring(i,i+1);
    if (s.charCodeAt(i) == 13)
    // this is a line break

  • How do I determine the number of plots on a waveform graph?

    How do I determine the number of plots that have previously been plotted on a waveform graph? I am loading dynamic data from a file. If I convert to an array and size it and there is only one plot, I get the number of data points and I don't know how to tell the difference.

    Usually by reading the graph terminal or a local of it and determining the first or second dimension (not sure which at the moment) size of the resulting 2 dimensional array. If it is a 1 dimensional array you have either only one plot or an array of clusters each representing one plot. But as these data types are determined by compile time, there shouldn't be a problem with this causing ambiguity.
    Rolf K
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How can I determine the number and resolution of the current displays/screens?

    I am developing a vision application that will require a specific window size, thus the application must run with the screen resolution at predified levels. It is also possible that the application will run on a system with multiple monitors, so I need to be able to determine the number of monitors, and the resolution of each.

    Hi
    I recommend you to work with the VI Server functions (Application class properties). See my little example.
    Regards,
    Luca
    Attachments:
    VI_Server.vi ‏22 KB

  • How can I determine the number and sizes of redologs?

    Dear all,
    How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
    Please advice,
    Amy

    Two questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
    I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here.

  • How to know Oracle Developer Suite Release Number?

    Hi,
    I have installed 11.5.10 CU2 on Windows XP SP2.
    I have below dirs after installtion:
    (1) D:\orclapps\orclappsappl
    (2) D:\orclapps\orclappscomn
    (3) D:\orclapps\orclappsdata
    (4) D:\orclapps\orclappsdb\9.2.0
    (5.1) D:\orclapps\orclappsora\8.0.6
    (5.2) D:\orclapps\orclappsora\iAS
    Following note 391564.1. I want to know Oracle Developer Suite Release to choose appropriate patch as per point 3.3. How can i know Developer Suite Release Number.
    Thanks.

    We discussed this in the forum before, please see these threads/docs, it should be helpful.
    how to find the developer version
    how to find the developer version
    How to Obtain Oracle Forms Version in Oracle Applications 11i from Command Line [ID 392793.1]
    Thanks,
    Hussein

Maybe you are looking for